Highly stable rigid main‐chain nonlinear optical polymers with nematic phase: Effect of liquid‐crystalline phase on nonlinear optical response

Nonlinear optical (NLO) rigid main‐chain polyesters containing azobenzene mesogens with high thermal and temporal stabilities were synthesized from derivatives of hydroxyphenylazobenzoic acid. The NLO properties of the homopolymer, poly[4‐(4‐hydroxy‐3‐methyl phenyl)azo]benzoic acid, and copolymers of 4‐[(4‐hydroxy‐3‐methylphenyl)azo]benzoic acid, 4‐[(4‐hydroxy‐2‐methylphenyl)azo]benzoic acid, and 4‐[(4‐hydroxy‐2‐pentadecyl phenyl)azo]benzoic acid (PSCpHBA) with p‐HBA were measured by the Maker fringe technique. The thermal and liquid‐crystalline (LC) phase behaviors of the polymers were examined by differential scanning calorimetry, a thermal‐stimulated polarization current, and polarized light microscopy. The polymers except PSCpHBA exhibited nematic‐threaded and Schlieren textures. The LC orientations give rise to an enhanced NLO response. The polymers had high thermal and temporal stabilities for second‐harmonic generation activity because of their rigid aromatic backbone. This study suggests that the rigid aromatic main chain exhibiting an LC phase is a promising simple method to synthesize highly stable NLO polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1527–1535, 2003     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Solid‐Phase Radical Polymerization of Halogen‐Bond‐Based Crystals and Applications to Pre‐Shaped Polymer Materials

Liquid vinyl monomers were converted into solid crystals via halogen bonding. They underwent solid‐phase radical polymerizations through heating at 40 °C or ultraviolet photo‐irradiation (365 nm). The X‐ray crystallography analysis showed the high degree of monomer alignment in the crystals. The polymerizations of the solid monomer crystals yielded polymers with high molecular weights and relatively low dispersities because of the high degree of the monomer alignment in the crystal. As a unique application of this system, the crystalized monomers were assembled to pre‐determined structures, followed by solid‐phase polymerization, to obtain a two‐layer polymer sheet and a three‐dimensional house‐shaped polymer material. The two‐layer sheet contained a unique asymmetric pore structure and exhibited a solvent‐responsive shape memory property and may find applications to asymmetric membranes and polymer actuators.     

Electro‐optical characteristics in phase separated liquid crystal/photo‐curable acrylic monomer mixture system

One of the main objectives of the experiment was to achieve the vertical aligned (VA) effect. To accomplish this, we employed liquid crystal (LC)/photo‐curable acrylic monomers mixture systems to prepare vertical alignment copolymer film (VACOF) for LC molecules with the photo‐polymerization induce phase separation (PIPS) process. From previous experimental results, we successfully fabricated LC devices without the micro‐protrusion structure. After the application of a saturated voltage, the LC molecules actually exhibited such interesting phenomena as uniaxial orientation, uniform single‐domain display state, etc. In this study, to obtain VACOF with smooth surface, we similarly controlled appropriate experimental conditions such as UV light exposure intensity and curing temperature, and altered process parameters such as the cell thickness, chemical structure length of the main chain type biphenol acrylic monomer [to simulate the main chain function of the traditional vertical alignment type polyimide (PI)], etc. During the experiment, we discovered that regardless of the cell thickness, this photo‐alignment system would yield the VACOF instead of the polymer disperse liquid crystal (PDLC) film morphology. Another notable finding was that the contrast ratio was heavily influenced by the length of the main chain type acrylic monomer structure for LC/monomer mixture systems, with enhancement of up to ～56%. Therefore, we further investigated the display effects, electro‐optical properties, etc. for these two main chain type acrylic monomer systems with different lengths and cell thicknesses. Copyright © 2011 John Wiley & Sons, Ltd.     

Dual Photo‐functionalized Amphiphile for Photo‐reversible Liquid Crystal Alignments

Without the conventional polymer‐based liquid crystal (LC) alignment process, a newly synthesized dual photo‐functionalized amphiphile (abbreviated as ADMA₁) was successfully applied as a robust photo‐reversible LC alignment layer by self‐assembly and photo‐polymerization. The LC alignment layer constructed by directly adding dual photo‐functionalized amphiphiles into LC media significantly cuts the manufacturing cost as well as opens new doors for the fabrication of novel electro‐optical devices.     

Azobenzene‐containing LC polymethacrylates highly photosensitive in broad spectral range

Two photosensitive chiral liquid crystalline azobenzene‐containing polymethacrylates having different length of flexible spacer connecting chromophores with backbone were synthesized and their phase behavior and photo‐optical properties were studied. Both polymers consist of lateral methyl substituents in ortho‐position of azobenzene chromophores providing high photosensitivity even in red spectral region as well as high thermal stability of photoinduced Z‐form of azobenzene chromophores. It is shown, that smectic phase (SmA*) formation in films of polymer with longer spacer predetermines its quite unusual spectral response to UV and subsequent visible light actions. The SmA* phase promotes spontaneous homeotropic alignment of azobenzene chromophores in polymer films. UV‐irradiation induces not only E‐Z isomerization but also results in disruption of homeotropic alignment, whereas subsequent visible light action enables to obtain films with the low degree of chromophores orientation. The photo‐orientation phenomena under the action of polarized light of different wavelength on polymer films were studied. The possibility of using red polarized light of moderate intensity for optical photorecording on polymer films is demonstrated. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2962–2970     

Silicon‐containing azo polymers with paired mesogens and their applications to optical memory media

We synthesized a novel photoresponsive monomer, silicon‐containing azo monomer with paired mesogens in the side chain, by reacting 3‐methacryloxypropylmethyldichlorosilane with 2‐[2‐(4‐cyano‐azobenzene‐4′‐oxy)ethylene‐oxy]ethyl alcohol, a mesogenic group. Corresponding homopolymer and copolymers with methyl methacrylate were generated via radical polymerization with AIBN as a radical initiator. Investigations of their thermal properties and optical textures confirmed the monomer and the homopolymer have smectic structures. Homo‐ and copolymer films showed high potential as reversible data recording media via photoinduced alignment of azobenzene groups with irradiation of a linearly or circularly polarized light. Out of all the samples, the copolymer films with high azo dye contents showed the best resolution in the recorded data as well as the fastest response to a pump beam due to large optical birefringence induced in a write‐in process. Strong dependence of the stability of the data stored in the films on the glass transition temperature of the polymers was also observed. In addition, high‐quality holographic grating patterns were inscribed even on the copolymer film with azo molar content of only 7.0% using a modified two‐wave mixing technique. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6734–6745, 2008     

New functional polymers for liquid crystal displays review of some recent developments

Polymeric materials play an important role in the construction and performance of liquid crystal displays. New functional polymers are developed to improve the displays on brightness, power efficiency and viewing angle performance. Polymer films with a controlled molecular structure and architecture provide new polarization optics to convert non‐polarized light into polarized light with higher efficiency than the traditional polarizers based on stretched iodine doped poly(vinyl alcohol). Other films provide a polarization compensation function to maintain an angular invariant net optical retardation of the display device and therewith a better contrast to wider viewing angles. Color generation by non‐absorbing methods is believed to improve on the display brightness. Special control of the liquid crystal alignment by photo‐sensitive orientation layers, polymer protrusions or photo‐formed polymer walls provide multiple director patterns within a single pixel to average out angular LC effects.     

Thermally enhanced photoinduced in‐plane reorientation in photo‐cross‐linkable polymer liquid crystalline films and its application to linear polarizer

Thermally enhanced photoinduced in‐plane molecular reorientation in new photo‐cross‐linkable polymer liquid crystalline (PPLC) films comprising 4‐[ω‐(4‐methoxycinnamoyloxy)alkyloxy]biphenyl side groups is explored using linearly polarized ultraviolet (LPUV) light exposure and subsequent annealing. The influence of the alkylene spacer length between the photo‐cross‐linkable group and the biphenyl mesogenic moiety is investigated. The straight‐line characteristics of the photoreactive mesogenic side group and the 4‐methoxycinnamoyl group play important roles in the high photoreactivity and the large thermally enhanced molecular reorientation, where the in‐plane order and the birefringence of the reoriented film are 0.61 and 0.18 are obtained. Finally, cooperative molecular reorientation of dichroic dyes doped in PPLC films is also achieved to fabricate a linear polarizer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4712–4718, 2008     

Synthesis of new thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing epoxide pendant groups

A new class of thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing pendant epoxide groups were synthesized and characterized. These new epoxy polymers were prepared through the bromination of poly(2,6‐dimethyl‐1,4‐phenylene oxide) in halogenated aromatic hydrocarbons followed by a Wittig reaction to yield vinyl‐substituted polymer derivatives. The treatment of the vinyl‐substituted polymers with m‐chloroperbenzoic acid led to the formation of epoxidized poly(2,6‐dimethyl‐1,4‐phenylene oxide) with variable pendant ratios, and the structures and properties were studied with nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography. The ratios of pendant functional groups were tailored for the polymer properties, and the results showed that the glass‐transition temperatures increased as the benzylic protons were replaced by bromo‐, vinyl‐, or epoxide‐functional groups, whereas the thermal stability decreased in comparison with the original polymer. Within a molar fraction of 20–50%, the degree of functionalization had little effect on the glass‐transition temperature; however, it correlated inversely with the thermal stability of each functionalized polymer. The thermal curing behavior of the epoxide‐functionalized polymer was enhanced by the increment of the pendant functionality, which resulted in a significant increase in the glass‐transition temperature as well as the thermal stability after the curing reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5875–5886, 2006     

Multicolor single‐layer electroluminescence device using poly(L‐glutamate) for hole transport

Helical poly(L ‐glutamate) with carbazole (Cz) side chains (PCELG) was synthesized as a hole‐transport host material for a dye‐doped polymer electroluminescence (EL) device. The main‐ and side‐chain conformations were investigated by a combination of polarized infrared spectroscopy and semiempirical quantum chemical calculation. In an electrically poled PCELG crystalline film, the main chain was found to assume a right‐handed α‐helical conformation with an order parameter of ～0.8. The Cz plane at the terminal side chain is inclined by about 44° toward the helical axis, creating a regular stacked structure conforming to the rigid α‐helical backbone. The principal EL characteristics of these devices were determined and compared with those of devices made with poly(N‐vinyl carbazole) (PVCz). For green and blue light, EL devices using PCELG exhibited luminance efficiencies comparable to those using PVCz. To the best of our knowledge, this was the first demonstration of primary colors emitted by an organic EL device with a polypeptide hole‐transport host material. The experimental results suggested that the total concentration and spatial arrangement of the Cz groups play an important role in determining the EL characteristics of dye‐doped polymer EL devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 496–502, 2010     

Synthesis and properties of photoalignable aromatic polyesters containing phenylenediacrylate units in their backbones and n‐alkyl moieties in their side groups

A series of poly[oxy(4‐n‐alkyl‐3,5‐benzoate)oxy‐1,4‐phenylenediacryloyl]s (PPDA‐CnBZ polymers) with high molecular weights was synthesized. These polymers exhibit excellent solubility in some common organic solvents and produce good quality films using conventional spin‐casting and drying processes. The polymers are thermally stable up to 357–362 °C in a nitrogen atmosphere; their glass transition temperatures are greater than 121 °C. The photoreactions and photoalignments of the polymers were investigated using ultraviolet‐visible and infrared spectroscopy, and their liquid crystal (LC) alignment properties were examined. The phenylenediacrylate (PDA) chromophores in the polyesters were found to mainly undergo photocyclization upon ultraviolet light irradiation. Irradiation of the polyester films with linearly polarized ultraviolet light (LPUVL) induces preferential orientation of the polymer main chains, while the unreacted PDA chromophores are aligned along the direction perpendicular to the electric vector of the LPUVL. All the films irradiated with LPUVL were found to align LCs in a direction perpendicular to the electric vector of the LPUVL. Moreover, these LC alignments persisted even on irradiated films annealed at temperatures up to 210 °C, which is much higher than the glass transition temperatures of the polyesters. These LC alignment characteristics are due to the anisotropic interactions of the LC molecules with the oriented polymer chains and with the unreacted PDA chromophores. LC alignments on the polyester film surfaces have homeotropic to homogeneous characteristics, depending on the length of the n‐alkyl side group, providing strong evidence that the n‐alkyl side groups of the polyesters play a critical role in determining the pretilt angles of the LCs. The LC pretilt angles were also found to be influenced by the thermal annealing history of the irradiated films. In summary, the excellent properties of the PPDA‐CnBZ polymers make them promising candidate materials for use as LC alignment layers in advanced LC display devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1322–1334, 2004     

Liquid crystal alignment property of n‐alkylthiomethyl‐ or n‐alkylsulfonylmethyl‐substituted polystyrenes

We synthesized a series of n‐alkylthiomethyl‐substituted polystyrenes (#T‐PS, # = 4, 8, 12, and 16) and n‐alkylsulfonylmethyl‐substituted polystyrenes (#S‐PS, # = 4, 8, 12, and 16), where # is the number of carbon atoms in the n‐alkyl side group of the polymers, using polymer analogous reactions to investigate their liquid crystal (LC) alignment properties. In general, the LC cell fabricated using the polymer film having a longer n‐alkyl side group, a thioether linkage group, and a higher molar content of n‐alkyl side group showed homeotropic LC alignment behavior with a pretilt angle of about 90°. The homeotropic alignment behavior was well correlated with the surface energy of the polymer films; when the positive dielectric anisotropic LC (ZLI‐5900‐000 from Merck) and negative dielectric anisotropic LC (MLC‐7026‐000 from Merck) were used to fabricate the LC cells, homeotropic alignment was observed when the surface energy values of the polymer were smaller than about 25 and 32 mJ/m², respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

A New Chemo‐Enzymatic Route to Side‐Chain Liquid‐Crystalline Polymers: The Synthesis and Polymerization of 6‐(4‐Methoxybiphenyl‐4′‐oxy)hexyl Vinyl Hexanedioate

A novel synthetic method combining chemo and enzymatic synthesis strategies was employed to prepare a vinyl acetate type monomer, 6‐(4‐methoxybiphenyl‐4′‐oxy)hexyl vinyl hexanedioate (VA‐LC). Homo‐ and copolymers of VA‐LC with maleic anhydride (MAn) were prepared by conventional free radical polymerization using 2,2′‐azobisisobutyronitrile (AIBN) and 1,1′‐azobis (cyclohexane carbonitrile) (AHCN) as an initiator at 95 and 60 °C, respectively. The thermal properties of the generated polymeric material were investigated by differential scanning calorimetry (DSC), and the optical texture was inspected by polarizing optical microscopy (POM). While the monomer VA‐LC does not exhibit liquid‐crystalline properties, poly(VA‐LC), and the alternating copolymer of VA‐LC with maleic anhydride both displayed such properties.

     

Self‐sustained actuation from heat dissipation in liquid crystal polymer networks

Liquid crystal polymer networks (LCNs) lead the research geared toward macroscopic motion of materials. These actuators are molecularly programed to adapt their shape in response to external stimuli. Non‐photo‐responsive thin films of LCNs covered with heat absorbers (e.g., graphene or ink) are shown to continuously oscillate when exposed to light. The motion is governed by the heat dissipated at the film surface and the anisotropic thermal deformation of the network. The influence of the LC molecular alignment, the film thickness, and the LC matrix on the macroscopic motion is analyzed to probe the limits of the system. The insights gained from these experiments provide not only guidelines to create actuators by photo‐thermal or pure photo‐effects but also a simple method to generate mechanical oscillators for soft robotics and automated systems. © 2018 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1331–1336     

Synthesis and Characterization of a Soluble Polyimide Containing a Photoreactive 4‐Styrylpyridine Derivative as the Side Group

An aromatic polyimide bearing photoreactive 4‐(2‐(4‐oxyethylenyloxyphenyl)vinyl)pyridine side groups was synthesized and characterized. The polymer is stable up to 300°C and soluble in organic solvents, giving thin films in good quality. When exposed to UV light, it reorients favorably with an angle of 98° with respect to the electric vector of linearly polarized UV light. UV‐exposed films align liquid‐crystals (LCs) homogeneously along the preferential orientation of the polymer chains on the surface. The pretilt angle of the LCs is 0.32–0.92°, depending on the exposure dose and annealing. LC alignment is retained up to 210°C. Based on the optical retardation behavior and spectroscopic measurements, a photoalignment mechanism is proposed.     

Free‐radical crosslinking copolymerization of 2,2′‐azobis[N‐(2‐propenyl)‐2‐methylpropionamide] with vinyl benzoate resulting in polymeric azo initiators

2,2′‐Azobis[N‐(2‐propenyl)‐2‐methylpropionamide] (APMPA) with two carbon–carbon double bonds and an azo group was copolymerized with vinyl benzoate (VBz) at 60 °C, resulting in azo groups containing VBz/APMPA prepolymers and crosslinked polymers as soluble and insoluble polymeric azo initiators, respectively. The polymerization characteristics of APMPA as a novel diallyl monomer were clarified with the rate and degree of polymerization and the monomer reactivity ratios. The gelation behaviors in VBz/APMPA crosslinking copolymerizations were examined in detail with a comparison of the actual gel point and the theoretical gel point calculated according to Stockmayer's equation with the tentative assumption of equal reactivity for both vinyl groups belonging to VBz and APMPA. The effectiveness of the resulting branched or crosslinked poly(VBz‐co‐APMPA)s as soluble or insoluble polymeric azo initiators, respectively, at providing graft polymers through the cleavage of azo groups at an elevated temperature was examined by the polymerization of allyl benzoate at 120 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 317–325, 2002     

Preparation of poly(2‐anilinoethanol) containing azobenzene group under electrical field and its liquid crystalline properties investigation

In this project, 2‐[N‐ethyl‐N‐[4‐[(4′‐nitrophenyl)azo]‐phenyl]amino]ethanol (Disperse Red‐I) was prepared by adding of (N‐ethyl‐2‐anilinoethanol) with the salt diazonium p‐nitroaniline. The main mesogenic liquid crystalline (LC) 2‐[N‐ethyl‐N‐[4‐[4′‐nitrophenyl)azo]‐phenyl]amino]ethyl‐3‐chloro propionate (Disperse Red‐II) was synthesized by reaction of disperse Red I and 3‐chloropropanoeic acid at the alkaline condition. Then 2‐anilinoethyl‐3‐chloropropionate‐{2‐[ethyl[4‐[(4′‐nitrophenyl)azo]phenyl]amino] ethanol}, (2AECP‐Red‐I) was prepared via reaction of disperse red‐II and 2‐anilinoethanol. On the other hand, poly 2‐anilinoethyl‐3‐chloropropionate‐{2‐[ethyl[4‐[(4′‐nitrophenyl)azo]phenyl]amino]ethanol} and poly(2AECP‐Red‐I) have been synthesized by polymerization of 2AECP‐Red‐I in two separate schemes. These include polymerization in the absence of electric field (EF) and polymerization under different EFs. A comparison of the results reveals that the polymer produced under electric field is more linear, regular in shape with high electrical conductivity, as well as good LC behavior with semectic texture. The resulted monomer and poly(2AECP‐Red‐I) are characterized by using Fourier transform infrared and ultraviolet–visible and were studied by thermogravimetric analysis and differential scanning calorimetry. Scanning electron microscopy images supported the formation of poly(2AECP‐Red‐I) and showed morphology feature and homogeneous structure on poly(2AECP‐Red‐I). Electrical conductivity of poly(2AECP‐Red‐I) has been studied by four‐point probe method. Copyright © 2014 John Wiley & Sons, Ltd.     

Photo‐aligning of polyimide layers for liquid crystals

A series of soluble and highly transparent semi‐alicyclic polyimides (PIs) with designed flexible linkages have been synthesized derived from an alicyclic aromatic dianhydride (1,2,3,4‐cyclobutanetetracarboxylic dianhydride, CBDA) and various aromatic ether‐bridged diamines. The semi‐alicyclic PIs were evaluated as the photo‐alignment layers of liquid crystal (LC) molecules in liquid crystal display (LCD). Experimental results indicate that the photo‐alignment characteristics of LC molecules induced by the photo‐aligned PI layers and the electro‐optical (EO) properties of the LC cell devices are closely related with PI backbone structures. The retardation of the photo‐aligned PI layers is correlated with the ultraviolet (UV) absorption intensity of PI at 220 to approximately 330 nm. The higher UV absorption intensity PI has, the higher retardation and lower pre‐tilt angle the photo‐aligned PI layer exhibits. The defect‐free and photo‐aligned PI layer could result into the uniform LC texture, which is highly desired for in‐plane switching (IPS) mode LCD devices. In comparison, PI layer containing trifluoromethyl moiety shows poor photo‐aligning performance because of the strong electronic withdrawing effect of the fluorinated linkage.     

Azo‐Polymer Janus Particles Assembled by Solvent‐Induced Microphase Separation and Their Photoresponsive Behavior

We report the successful fabrication of photoresponsive Janus particles (JPs) composed of an epoxy‐based azo polymer and poly(methyl methacrylate) (PMMA). Two representative azo polymers, of which one polymer (BP‐AZ‐CN) has cyano groups as electron‐withdrawing substituents on the azobenzene moieties and the other polymer (BP‐AZ‐CA) has carboxyl groups as the electron‐withdrawing substituents, were adopted for the investigation. The nanoscaled JPs, with a narrow size distribution and different azo polymer/PMMA ratios, were fabricated through self‐assembly in solution and as dispersions. Upon irradiation with linearly polarized light (λ=488 nm), two types of photoresponsive behavior were observed for JPs in the solid state. For JPs composed of BP‐AZ‐CN and PMMA, the light irradiation caused the azo‐polymer component to be stretched along the light polarization direction. Conversely, for JPs composed of BP‐AZ‐CA and PMMA, the azo‐polymer component became separated from PMMA component under the same irradiation conditions. These observations are valuable for a deeper understanding of the nature of self‐assembly and photoinduced mass‐transport at the nanometer scale.