Facile,one‐pot synthesis of aromatic diamine‐based phosphinated benzoxazines and their flame‐retardant thermosets

Three aromatic diamine‐based, phosphinated benzoxazines ( 7–9 ) were prepared from three typical aromatic diamines—4,4′‐diamino diphenyl methane ( 1 ), 4,4′‐diamino diphenyl sulfone ( 2 ), and 4,4′‐diamino diphenyl ether ( 3 ) by a one‐pot procedure. To clarify the reaction mechanism, a two‐pot procedure was applied, in which the reaction intermediates ( 4–6 ) were isolated for characterization. The structures of intermediates and benzoxazines were confirmed by high resolution mass, IR, and 1D and 2D‐NMR spectra. In addition to self‐polymerization, ( 7–9 ) were copolymerized with cresol novolac epoxy (CNE). After curing, the homopolymers of P( 7–9 ) are brittle while the copolymers of ( 7–9 )/CNE are tough. Dynamic mechanical analysis shows the T_gs of ( 7–9 )/CNE copolymers are 187, 190, and 171 °C, respectively. Thermal mechanical analysis shows the CTEs of ( 7–9 )/CNE copolymers are 46, 38, and 46 ppm, respectively. All the ( 7–9 )/CNE copolymers belong to an UL‐94 V‐0 grade, demonstrating good flame retardancy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Shrinkability of ethylene vinyl acetate/polyurethane blends and their characterization

Heat shrinkability of the polymer, which depends on the elastic memory, is being utilized in various applications, mainly in the field of encapsulation. The elastic memory is introduced into the system in the form of an elastomeric phase. Here the blends of ethylene vinyl acetate and polyurethane were studied with reference to their shrinkability, introducing crosslinking in both the phases. It is found that with increase in elastomer content the shrinkage increased to a certain level and then decreased. With increase in cure time shrinkage is decreased. It is seen that high‐temperature (HT) stretched samples showed higher shrinkage than room temperature (RT) stretched one. Generally, the crystallinity of the HT stretched sample is higher than that of low‐temperature stretched sample, which is again higher than that of original sample. From high temperature differential scanning calorimetry it is found that with increase in PU content stability towards oxygen is increased and further high temperature processing decreases the initial degradation temperature but enhances the rate of degradation. From scanning electron microscopy it is seen that an HT stretched sample is more elongated than an RT stretched one. Copyright © 2000 John Wiley & Sons, Ltd.     

Low dielectric thermoset. II. Synthesis and properties of novel 2,6‐dimethyl phenol–dipentene epoxy

A 2,6‐dimethyl phenol–dipentene adduct was synthesized from dipentene (DP) and 2,6‐dimethyl phenol, and then a 2,6‐dimethyl phenol–DP epoxy was synthesized from the reaction of the resultant 2,6‐dimethyl phenol–DP adduct and epichlorohydrin. The proposed structures were confirmed by Fourier transform infrared, elemental analysis, mass spectra, NMR spectra, and epoxy equivalent weight titration. The synthesized 2,6‐dimethyl phenol–DP adduct was cured with 4,4‐diamino diphenyl methane, phenol novolac, 4,4‐diamino diphenyl sulfone, and 4,4‐diamino diphenyl ether. The thermal properties of the cured epoxy resins were studied with differential scanning calorimetry, dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those for the bisphenol A epoxy system. The cured 2,6‐dimethyl phenol–DP epoxy exhibited a lower dielectric constant (ca. 3.1), a lower dissipation factor (ca. 0.065), a lower modulus, lower thermal stability (5% degradation temperature = 366–424 °C), and lower moisture absorption (1.21–2.18%) than the bisphenol A system but a higher glass‐transition temperature (ca. 173–222 °C) than that of bisphenol A system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4084–4097, 2002     

Synthesis and characterization of diphenylaminodiphenyl stryl based alternating copolymers

Diphenylaminobiphenylated stryl based alternating copolymers with phenyl or fluorene, which were expected to have a terphenylene vinylene backbone containing an (N,N‐diphenylamino)biphenyl pendant and a phenyl/fluorene/phenylene vinylene backbone containing an (N,N‐diphenylamino)biphenyl pendant, were synthesized by a Suzuki coupling reaction. The obtained copolymers were confirmed with various types of spectroscopy. The alternating copolymers showed good hole‐injection properties because of their low oxidation potential and good solubility and high thermal stability with a high glass‐transition temperature. The alternating copolymers showed blue emissions because of the adjusted conjugation lengths; the maximum wavelength was 460 nm for poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐5‐(2′‐ethylhexyloxy)‐2‐methoxybenzene} and 487 nm for poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl] vinylene‐alt‐9,9‐dihexylfluorene}. The maximum brightness of indium tin oxide/poly(3,4‐ethylene dioxythiophene)/polymer/LiF/Al devices with poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐5‐(2′‐ethylhexyloxy)‐2‐methoxybenzene} or poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐9,9‐dihexylfluorene} as the emitting layer was 250 or 1000 cd/m², respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 341–347, 2007     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Hydro­gen bonding in substituted nitro­anilines: isolated nets in 1,3‐­diamino‐4‐nitrobenzene and continuously interwoven nets in 3,5‐­dinitro­aniline

Molecules of 1,3‐diamino‐4‐nitrobenzene, C₆H₇N₃O₂, are linked by N—H?O hydrogen bonds [N?O 2.964 (2) and 3.021 (2) Å; N—H?O 155 and 149°] into (4,4) nets. In 3,5‐di­nitro­aniline, C₆H₅N₃O₄, where Z′ = 2, the mol­ecules are linked by three N—H?O hydrogen bonds [N?O 3.344 (2)–3.433 (2) Å and N—H?O 150–167°] into deeply puckered nets, each of which is interwoven with its two immediate neighbours.     

Preparation and properties of a new aromatic polyamide with an ethoxycarbonyl pendant group: Poly(4,4′‐diamino‐2′‐ethoxycarbonyl‐benzanilide terephthalamide)

A new aromatic polyamide containing a pendant ethoxycarbonyl group was successfully synthesized from the reaction between 4,4′‐diamino‐2′‐ethoxycarbonylbenzanilide and terephthaloyl chloride. The new polymer was soluble in organic solvents such as N‐methyl‐2‐pyrrolidone and dimethylacetamide, and a tough and transparent film was cast from the polymer solution with viscosities ranging from 2.6 to 5.6 dL/g. When the polymer film was heat‐treated at a temperature greater than 300 °C, a cyclization reaction occurred between the ethoxycarbonyl group and the adjacent amide bond to form a benzoxazinone unit in the polymer backbone. The thermal decomposition onset temperature of the cyclized film was about 523 °C, which was somewhat lower than that of poly(p‐phenylene terephthalamide) (PPTA; 566 °C); however, the decomposition rate was slower than that of PPTA to yield a higher char residue. The dispersion temperature of the uncyclized poly(4,4′‐diamino‐2′‐ethoxycarbonylbenzanilide terephthalamide) (PDEBTA) was about 340 °C, whereas that of the cyclized PDEBTA was not clear. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 936–942, 2000     

Synthesis and characterization of organosoluble polyimides with trifluoromethyl‐substituted benzene in the side chain

New aromatic diamines substituted with a trifluoromethyl group in the side chain, 2,4‐diamino‐3′‐trifluoromethylazobenzene, 2,4‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] aniline, and 3,5‐diamino‐1‐[(4′‐trifluoromethyl phenoxy) phenyl] benzamide were synthesized and characterized and used to prepare polyimides by a one‐step high‐temperature polycondensation method. Experimental results indicated that the prepared polyimides possess good solubility in strong organic solvents such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylformamide, and N,N′‐dimethylacetamide. Homogeneous solutions with solid contents as high as 15–20% can be prepared, which are stable for storing longer than 2 weeks at room temperature. The polyimides exhibited glass‐transition temperatures of 249–292 °C and good thermal stability. The PI‐I_c and PI‐III_c films prepared by casting the fully imidized polymer solutions showed good transparency with cutoff wavelengths at 320–330 nm. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1572–1582, 2002     

Synthesis and characterization of phthalazinone containing poly(arylene ether)s via a novel N–C coupling reaction

High‐molecular‐weight poly(phthalazinone)s with very high glass‐transition temperatures (T_g's) were synthesized via a novel N–C coupling reaction. New bisphthalazinone monomers ( 7a–e ) were synthesized from 2‐(4‐chlorobenzoyl) phthalic acid in two steps. Poly(phthalazinone)s, having inherent viscosities in the range of 0.34–0.91 dL/g, were prepared by the reaction of the bis(phthalazinone) monomers with an activated aryl halide in a dipolar aprotic solvent in the presence of potassium carbonate. The poly(phthalazinone)s exhibited T_g's greater than 230 °C. polymer 8b synthesized from diphenyl biphenol and bis(4‐flurophenyl) sulfone demonstrated the highest T_g of 297 °C. Thermal stabilities of the poly(phthalazinone)s were determined by thermogravimetric analysis. All the poly(phthalazinone)s showed a similar pattern of decomposition with no weight loss below 450 °C in nitrogen. The temperatures of 5% weight loss were observed to be about 500 °C. The poly(phthalazinone)s containing 4,4′‐isopropylidenediphenol and 4,4′‐(hexafluoroisopropylidene) diphenol and diphenyl ether linkage were soluble in chlorinated solvents such as chloroform. Other poly‐(phthalazinone)s were soluble in dipolar aprotic solvents such as N,N′‐dimethylacetamide. The soluble poly(phthalazinone)s can be cast as flexible films from solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2481–2490, 2003     

A novel benzimidazole moiety‐containing benzoxazine: Synthesis,polymerization, and thermal properties

A novel benzoxazine‐containing benzimidazole moiety (P‐PABZ) was synthesized from 2‐(4‐aminophenyl)‐1H‐benzimidazole‐5‐amine and characterized. With the aid of differential scanning calorimetry and in situ Fourier transform infrared, we found the thermal polymerization of P‐PABZ in bulk started around 140 °C and its favored polymerization pathway. Compared to the benzoxazine derived from 4,4′‐diamine diphenyl methane (P‐MDA), P‐PABZ exhibited lower processing temperature, and the corresponding polymers had higher glass transition temperature and enhanced thermal stability. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Aromatic polybenzoxazoles containing ether–sulfone linkages

A series of poly(o‐hydroxy amide)s having both ether and sulfone linkages in the main chain were synthesized via the low‐temperature solution polycondensation of 4,4′‐[sulfonylbis(1,4‐phenylene)dioxy]dibenzoyl chloride and 4,4′‐[sulfonylbis(2,6‐dimethyl‐1,4‐phenylene)dioxy]dibenzoyl chloride with three bis(o‐aminophenol)s including 4,4′‐diamino‐3,3′‐dihydroxybiphenyl, 3,3′‐diamino‐4,4′‐dihydroxybiphenyl, and 2,2‐bis(3‐diamino‐4‐hydroxyphenyl)hexafluoropropane. Subsequent thermal cyclodehydration of the poly(o‐hydroxy amide)s afforded polyethersulfone benzoxazoles. Most of the poly(o‐hydroxy amide)s were soluble in polar organic solvents such as N‐methyl‐2‐pyrrolidone; however, the polybenzoxazoles without the hexafluoroisopropylidene group were organic‐insoluble. The polybenzoxazoles exhibited glass‐transition temperatures (T_g) in the range of 219–282 °C by DSC and softening temperatures (T_s) of 242–320 °C by thermomechanical analysis. Thermogravimetric analyses indicated that most polybenzoxazoles were stable up to 450 °C in air or nitrogen. The 10% weight loss temperatures were recorded in the ranges of 474–593 °C in air and 478–643 °C in nitrogen. The methyl‐substituted polybenzoxazoles had higher T_g's but lower T_s's and initial decomposition temperatures compared with the corresponding unsubstituted polybenzoxazoles. For a comparative purpose, the synthesis and characterization of a series of sulfonyl polybenzoxazoles without the ether group that derived from 4,4′‐sulfonyldibenzoyl chloride and bis(o‐aminophenol)s were also reported. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2262–2270, 2001     

Capacites calorifiques de durcisseurs amines et resines epoxydes

Heat capacities of some amines (aniline, N-methyl aniline, meta-phenylene diamine, diamino diphenyl methane, diamino diphenyl sulfone and diamino diphenyl oxide) and two epoxy resins (phenyl glycidyl ether and diglycidyl ether of bisphenol A) have been determined in the solid and liquid states versus temperature. The heat capacity increments related to the functional groups have been evaluated compared to references like benzene, aniline and phenyl glycidyl ether.     

Photoinduced Electron Transfer between N,N, Nr,N' ‐Tetra‐(p‐methylphenyl)‐4, 4‐diamino‐1, 1'‐diphenyl Ether (TPDAE) and Fullerenes (C60/C70) by Laser Flash Photolysis

The photoinduced electron‐transfer reaction of N, N, N', N'‐tetra‐(p‐methylphenyl)‐4,4'‐diamino‐1,1'‐diphenyl ether (TPDAE) and fullerenes (C₆₀/C₇₀) by nanosecond laser flash photolysis occurred in benzonitrile. Transient absorption spectral measurements were carried out during 532 nm laser flash photolysis of a mixture of the fullerenes (C₆₀/C₇₀) and TPDAE. The electron transfer from the TPDAE to excited triplet state of the fullerenes (C₆₀/C₇₀) quantum yields and rate constants of electron transfer from TPDAE to excited triplet state of fullerenes (C₆₀/C₇₀) in benzonitrile have been evaluated by observing the transient absorption bands in the near‐IR region where the excited triplet state, radical anion of fullerenes (C₆₀/C₇₀) and radical cations of TPDAE are expected to appear.     

Three‐component,negative‐type,alkaline‐developable,thermally stable,and photosensitive polymer based on poly(2,6‐dihydroxy‐1,5‐naphthalene), a crosslinker,and a photoacid generator

A negative working and chemically amplified photosensitive polymer has been developed, which is based on poly(2,6‐dihydroxy‐1,5‐naphthalene) (PDHN), the crosslinker 4,4′‐methylenebis[2,6‐bis(hydroxymethyl)]phenol, and the photoacid generator (5‐propylsulfonyloxyimino‐5H‐thiophen‐2‐ylidene)‐(2‐methylphenyl)acetonitrile. PDHN, with a number‐average molecular weight of 25,000, was prepared by the oxidative coupling polymerization of 2,6‐dihydroxynaphthalene with di‐μ‐hydroxo‐bis[(N,N,N′,N′‐tetramethylethylenediamine)copper(II)] chloride in 2‐methoxyethanol at room temperature. The resulting PDHN showed a 5% weight loss temperature of 440 °C in nitrogen and a low dielectric constant of 2.82. The resist showed a sensitivity of 8.3 mJ cm^?2 and a contrast of 11 when it was exposed to 436‐nm light, followed by postexposure baking at 100 °C for 5 min and development with a 2.38 wt % aqueous tetramethylammonium hydroxide solution at 25 °C. A fine negative image featuring 10‐μm line‐and‐space patterns was obtained on a film 3 μm thick exposed to 10 mJ cm^?2 of ultraviolet light at 436 nm in the contact‐printed mode. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2235–2240, 2004     

Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′‐bis(4‐aminophenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine, N, N′‐bis(4‐aminophenyl)‐N, N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluoronitrobenzene, followed by catalytic reduction. A series of novel aromatic polyamides with triphenylamine units were prepared from the diamine and various aromatic dicarboxylic acids or their diacid chlorides via the direct phosphorylation polycondensation or low‐temperature solution polycondensation. All the polyamides were amorphous and readily soluble in many organic solvents such as N, N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass‐transition temperatures (257–287 °C), 10% weight‐loss temperatures in excess of 550 °C, and char yields at 800 °C in nitrogen higher than 72%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2810–2818, 2002     

Synthesis and Characterization of Polyesterimides Containing Ether Linkages

Abstract

Three novel dicarboxylic acids, bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl sulfone, bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl methane, and bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl ether, were synthesized, and several polyesterimides were prepared from diacid chlorides and bisphenols by solution polycondensation. The polymers were obtained in 65–88% yield and had inherent viscosities in the 0.18 to 0.64 dL/g range. The polymers were characterized by IR, elemental analysis, x-ray, TGA, DSC, and solubility tests. All the polymers were readily soluble in polar aprotic solvents and had a 10% weight loss temperature above 375°C in nitrogen.     

Synthesis,Crystal Structure,Theoretical Calculation,Specific Heat Capacity,and Thermodynamic Properties of 4,4'-Bis(3-N-methoxyformyl thioureido)-diphenyloxide

4,4′‐Bis(3‐N‐methoxyformyl thioureido)‐diphenyloxide was prepared via reaction of 4,4′‐diaminodiphenyl alter with potassium sulfocyanate and ethyl chloroacetate in ethyl acetate. The single crystal of the title compound was cultured by slow evaporation method at room temperature. The crystal structure was determined with X‐ray diffractometer. It is a monoclinic crystal, space group C2/c with a=0.95911(19) nm, b=0.75922(15) nm, c=2.7161(5) nm, α=90°, β=97.675 (3) °, γ=90°, V=1.9601(7) nm³, Z=4, D_c=1.472 g·cm⁻³, F(000) =904, µ=0.311 cm⁻¹, R₁=0.0367, wR₂=0.1408. The specific heat capacity of the title compound was determined with continuous C_p mode of mircocalorimeter. The thermal behavior of the title compound was studied under a non‐isothermal condition by DSC method.     

Poly(arylether amides) and poly(aryletherketone amides) via aromatic nucleophilic substitution reactions of self‐polymerizable AB and AB2 monomers

Two new extended self‐polymerizable AB monomers, N‐(4‐fluorobenzoyl)‐4‐amino‐4′‐hydroxydiphenylether and N‐(4‐fluorobenzoyl)‐4‐amino‐4′‐hydroxybiphenyl, were prepared. The monomers were homopolymerized and copolymerized to high‐molecular‐weight, linear poly(arylether amides) in N‐methylpyrrolidone (NMP)/toluene in the presence of potassium carbonate at elevated temperature. The polymers retained NMP up to 200 °C. Samples containing small amounts of the solvent (5–10 wt %) were soluble in polar aprotic solvents. However, after complete removal of the NMP, the polymers were only soluble in strong acids such as sulfuric acid and methanesulfonic acid (MSA). The polymers, which had intrinsic viscosities of 0.57–1.49 dL/g (30.1 ± 0.1 °C in MSA), were semicrystalline with melting temperatures above 400 °C. Two new self‐polymerizable AB₂ amide monomers, N,N′‐bis(4‐fluorobenzoyl)‐3,4‐diamino‐4′‐hydroxydiphenylether and N,N′‐bis(4‐fluorobenzoyl)‐3,5‐diamino‐4′‐hydroxybenzophenone, were also prepared and polymerized to give a hyperbranched poly(arylether amide) and a hyperbranched poly(aryletherketone) amide. The arylfluoride‐terminated, amorphous polymers had intrinsic viscosities of 0.34 and 0.24 dL/g (30.0 ± 0.1 °C in m‐cresol), glass‐transition temperatures of 210–269 °C, and were soluble in a wide variety of organic solvents. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis indicated that the components of the low‐molecular‐weight fractions contained cyclic structures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2374–2389, 2003     

Suzuki Cross‐coupling Method to Prepare 4,4″‐Diamino‐p‐terphenyl

The synthesis of 4,4″‐dinitro‐p‐terphenyl is accomplished by double Suzuki cross‐coupling. The product was reduced catalytically to give 4,4″‐diamino‐p‐terphenyl in 75% overall yield.     

Synthesis of photoreactive polyimide having indan structure

Polyimide containing an indan unit and alkyl moiety with a high molecular weight was prepared from 5,7‐diamino‐1,1,4,6‐tetramethylindan and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride. This polyimide was amorphous and soluble in common organic solvents, such as tetrahydrofuran, chloroform, and cyclopentanone. Thermogravimetry of the polyimide showed good thermal stability, indicating that a 10% weight loss of the polyimide was observed at 500 °C in nitrogen. The glass‐transition temperature of the polyimide was not observed by DSC measurement between room temperature and 400 °C at a heating rate of 10 °C/min (Apparatus: DSC3100 MAC Science Co., Ltd.). Transparency of the polyimide at 365 nm was 80%. The polyimide acted as a photosensitive resist of negative type by UV radiation. The resist had a sensitivity of 31 mJ/cm² and a contrast of 2.3 when it was developed with cyclopentanone at room temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 423–428, 2002