Kinetics and mechanism of decomposition of intermediate complex during oxidation of pectate polysaccharide by potassium permanganate in alkaline solutions

The kinetics of decomposition of an [Pect·Mn^VIO₄^2?] intermediate complex have been investigated spectrophotometrically at various temperatures of 15–30°C and a constant ionic strength of 0.1 mol dm^?3. The decomposition reaction was found to be first‐order in the intermediate concentration. The results showed that the rate of reaction was base‐catalyzed. The kinetic parameters have been evaluated and found to be ΔS^≠ = ? 190.06 ± 9.84 J mol^?1 K^?1, ΔH^≠ = 19.75 ± 0.57 kJ mol^?1, and ΔG^≠ = 76.39 ± 3.50 kJ mol^?1, respectively. A reaction mechanism consistent with the results is discussed. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 67–72, 2003     

Catalytic Adsorptive Stripping Voltammetry of Molybdenum: Redox Kinetic Measurements

The electrode mechanism of Mo(VI) reduction was studied under catalytic adsorptive stripping mode by means of square‐wave voltammetry (SWV). Mo(VI) creates a stable surface active complex with mandelic acid. The electrode reaction of Mo(VI)‐mandelic acid system undergoes as one‐electron reduction, exhibiting properties of a surface electrode process. In the presence of chlorate, bromate, and hydrogen peroxide, the electrode reaction is transposed into a catalytic mechanism. The experimental results are compared with the recent theory for surface catalytic reaction, enabling qualitative characterization of the electrode mechanism in the presence of different catalytic agents. Utilizing both the method of “split SW peaks” and “quasireversible maximum” the standard redox rate constant of Mo(VI)‐mandelic acid system was estimates as k_s=150±5 s^?1. By fitting the experimental and theoretical results, the following catalytic rate constants have been estimated: (8.0±0.5)×10⁴ mol^?1 dm³ s^?1, (1.0±0.1)×10⁵ mol^?1 dm³ s^?1, and (3.2±0.1)×10⁶ mol^?1 dm³ s^?1, for hydrogen peroxide, chlorate, and bromate, respectively.     

IONIC STRENGTH EFFECTS ON THE GROUND STATE COMPLEXATION and TRIPLET STATE ELECTRON TRANSFER REACTION BETWEEN ROSE BENGAL and METHYL VIOLOGEN

Abstract— The equilibrium constants, K_c, for complexation between methyl viologen dication (MV²+) and Rose Bengal, or Eosin Y, decrease with increasing ionic strength. At zero ionic strength K_c is 6500 (± 500) mol^?1 dm³ for Rose Bengal and 3200 (± 200) mol^?1 dm³ for Eosin Y, and these values decrease to 1500 (± 100) and 680 (± 40) mol^?1 dm³, respectively, at an ionic strength of 0.1 mol dm^?3. K_c is independent of pH between 4.5 and 10. ΔH is -25 (± 1) kJ mol^?1 for complexation with either dye, whereas ΔS is -15 (± 3) J K^?1 mol^?1 for Rose Bengal, and - 23 (± 3) J K^?1 mol^?1 for Eosin Y. The complexation constant for Rose Bengal and the neutral viologen, 4,4'-bipyridinium-N, N'-di(propylsulphonate), (4,4'-BPS), is 420 (± 35) mol^?1 dm³, and independent of ionic strength. No complexation could be observed for either Rose Bengal or Eosin with another neutral viologen, 2,2'-bipyridinium-N,N'-di(propylsulphonate), (2,2'-BPS). MV²+ quenches the triplet state of Rose Bengal with a rate constant of 7 × 10⁹ mol^?1 dm³ s^?1, and this rate constant decreases slightly as ionic strength increases. The cage escape yield following quenching, Φ_cc is very low (Φ_cc= 0.02 (± 0.005), and independent of ionic strength. 4,4'-BPS quenches the triplet state of Rose Bengal with a rate constant of 2.2 (± 0.1) × 10⁹ mol^?1 dm³ s^?1, and gives a cage escape yield of 0.033 (± 0.006). 2,2'-BPS quenches the Rose Bengal triplet with a rate constant of 6 (± 1) × 10⁸ mol^?1 dm³ s^?1 and gives a cage escape yield of 0.07 (± 0.01). Conductivity measurements indicate that MV²+(Cl^?)₂ is completely dissociated at concentrations below 2 × 10^?2 mol dm^?3.     

Investigation of the kinetics of formation of 1 : 1 complex between chromium(III) with 1,3-propanediamine-N,N′-diacetate-N,N′-di-3-propionate ion in aqueous acidic media

The kinetics of formation of the 1?:?1 complex of chromium(III) with 1,3-propanediamine-N,N′-diacetate-N,N′-di-3-propionate (1,3-pddadp) were followed spectrophotometrically at λ _max?=?557?nm. The reaction was first-order in chromium(III). Increasing the 1,3-pddadp concentration from 2.2?×?10^?2 to 0.11?mol?dm^?3 accelerated the reaction rate. Increasing the hydrogen ion concentration from 1.995?×?10^?5 to 6.31?×?10^?4 mol?dm^?3 retarded the reaction rate. The reaction rate was also retarded by increasing ionic strength and dielectric constant of the reaction medium. A mechanism was suggested to account for the results obtained which involves ion-pair formation between the various reactants. Values of 22?kJ?mol^?1 and ?115?J?K^?1 mol^?1 were obtained for the energy and the entropy of activation, respectively, which indicate an associative mechanism. The logarithm of the formation constant of the 1?:?1 complex formed was 11.3.     

Mechanism of the oxidation of hydrazoic acid by tetrachloroaurate(III) ion

The oxidation of hydrazoic acid in perchloric acid in the absence of added chloride under pseudo first-order conditions ([HN₃] » [AuCl ₄ ^? ]) is first order in [Au(III)]. Michaelis–Menten type of dependence (linear plots of k _obs ^?1 vs [HN₃]^?1) is observed with respect to [HN₃]. The k _obs is independent of ionic strength and the plot between k _obs ^?1 and [H⁺] is linear. The inner-sphere mechanism is consistent with the formation of an axial complex (K = 25 dm³ mol^?1) between AuCl₃(HO)^? ion and HN₃ prior to its rate determining decomposition (k = 0.0182 s^?1). It is inferred that the free radicals N ₃ ^? do not oxidise Au(II). The reaction becomes outer-sphere in the presence of added Cl^? ions which are inferred to form a cage around the hydronium ion surrounding the AuCl ₄ ^? ions. The penetration of N ₃ ^? through the cage is rate controlling and within the cage, the electron transfer from N ₃ ^? ion to AuCl ₄ ^? is fast. The value of the rate determining constant k ₂ is 0.547 dm³ mol^?1 s^?1 and the equilibrium constant K _Cl for the cage formation is 5 dm³ mol^?1 at 25 °C. It is calculated that the minimum HN₃ concentration required before the reaction exhibits zero-order dependence in HN₃ is 0.31 mol dm^?3 when [H⁺] = 0.18 mol dm^?3 at 25 °C.     

Kinetics and mechanism of silver(I) catalyzed oxidation of water with bismuth(V) in HClO4?HF mixture

The kinetics of the oxidation of water with bismuth(V) in presence of silver(I) has been investigated in a mixture of HClO₄ (1.0 mol dm^?3) and HF (1.5 mol dm^?3). The reaction is second order, viz., first order with respect to bismuth(V) and silver(I), each, and the second order rate constant is (6.6 ± 0.7) × 10^?3 dm³ mol^?1 s^?1. However, rate is independent of hydrogen ion concentration. A comparative analysis of these results with the results obtained for pdp, pds, and Ce(IV), reactions with silver(I) has also been made to correlate the rate constants and the redox-potentials of the oxidant couples.     

Polymerization of neat 2‐ethylhexyl acrylate induced by a pulsed electron beam

The bulk polymerization of 2‐ethylhexyl acrylate (2‐EHA), induced by a pulsed electron beam, was investigated with pulse radiolysis, gravimetry, and Fourier transform infrared spectroscopy. The roles of the dose rate, pulse frequency, and added acrylic acid (AA) in the polymerization of 2‐EHA were examined at ambient temperature. In the range of 12.6–71.2 Gy/pulse, the polymerization of 2‐EHA was dose‐rate‐dependent: at the same total dose, a lower dose rate yielded a higher conversion. Also, a lower pulse rate gave a higher conversion at the same total dose. The addition of up to 10 wt % AA showed no increase in the conversion of 2‐EHA at a low conversion (8 kGy), but at a higher conversion (16 kGy), a 20 wt % increase in the conversion of 2‐EHA was observed. The estimated values (1.6 ± 0.3) × 10^?3 (dm³ s)^3/2 mol^?1 s^?1/2 for k_p(G/2k_t)^1/2 and 2.6 ± 0.8 dm³ s J^?1 for 2k_tG (where k_p is the rate constant of propagation, k_t is the rate constant of bimolecular termination, and G is the yield of free radicals) were obtained at relatively low conversions. The reaction rate constant of the addition of 2‐EHA^· free radicals to the monomer was measured by pulse radiolysis and found to be 2.8 × 10² mol^?1 dm³ s^?1. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 196–203, 2003     

Alginate polyelectrolyte ionotropic gels. XVIII. Oxidation of alginate polysaccharide by potassium permanganate in alkaline solutions: Kinetics of decomposition of intermediate complex

The kinetics of decomposition of [Alg · Mn ^VIO₄^2?] intermediate complex have been investigated spectrophotometrically at a constant ionic strength of 0.5 mol dm^?3. The decomposition reaction was found to be first-order in the intermediate concentration. The results showed that the rate of reaction was base-catalyzed. The kinetic parameters have been evaluated and found to be ΔS^? = ?103.88±6.18 J mol^?1 K^?1, ΔH^? = 51.61 ± 1.02 kJ mol^?1, and ΔG^? = 82.57 ± 2.86 kJ mol^?1, respectively. A reaction mechanism consistent with the results is discussed. © 1993 John Wiley & Sons, Inc.     

Kinetics of oxidation of hypophosphite ion by Au(III) in hydrochloric acid medium

Hypophosphite ion is oxidised by Au(III) in aqueous hydrochloric acid to give phosphorus acid and Au(I). The kinetics of the reaction has been studied spectrophotometrically in the UV region at different temperatures. The oxidation of hypophosphorous acid is first order with respect to both Au(III) and substrate. Hydrogen ion has no effect on the rate in acid media (0.15–1.0)M. The energy and entropy of activations are 128 ± 3.0kJ mol^?1 and 135.8 ± 6.5 JK^?1 mol^?1 respectively. The results are interpreted in terms of the probable formation of intermediate Au(lI).     

Ag(I)‐Catalyzed Chlorination of Linezolid during Water Treatment: Kinetics and Mechanism

The kinetic and mechanistic study of Ag(I)‐catalyzed chlorination of linezolid (LNZ) by free available chlorine (FAC) was investigated at environmentally relevant pH 4.0–9.0. Apparent second‐order rate constants decreased with an increase in pH of the reaction mixture. The apparent second‐order rate constant for uncatalyzed reaction, e.g., k″_app = 8.15 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 0.076 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C and for Ag(I) catalyzed reaction total apparent second‐order rate constant, e.g., k″_app = 51.50 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 1.03 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C. The Ag(I) catalyst accelerates the reaction of LNZ with FAC by 10‐fold. A mechanism involving electrophilic halogenation has been proposed based on the kinetic data and LC/ESI/MS spectra. The influence of temperature on the rate of reaction was studied; the rate constants were found to increase with an increase in temperature. The thermodynamic activation parameters E_a, ΔH^#, ΔS^#, and ΔG^# were evaluated for the reaction and discussed. The influence of catalyst, initially added product, dielectric constant, and ionic strength on the rate of reaction was also investigated. The monochlorinated substituted product along with degraded one was formed by the reaction of LNZ with FAC.     

A kinetic study of the oxidation of L-ascorbic acid by chromium(VI)

The reaction between chromium(VI) and L-ascorbic acid has been studied by spectrophotometry in the presence of aqueous citrate buffers in the pH range 5.69–7.21. The reaction is slowed down by an increase of the ionic strength. At constant ionic strength, manganese(II) ion does not exert any appreciable inhibition effect on the reaction rate. The rate law found is where K_p is the equilibrium constant for protonation of chromate ion and k_r is the rate constant for the redox reaction between the active forms of the oxidant (hydrogenchromate ion) and the reductant (L-hydrogenascorbate ion). The activation parameters associated with rate constant k_r are E_a = 20.4 ± 0.9 kJ mol^?1, ΔH^≠ = 17.9 ± 0.9 kJ mol^?1, and ΔS^≠=?152 ± 3 J K^?1 mol^?1. The reaction thermodynamic magnitudes associated with equilibrium constant K_p are ΔH⁰ = 16.5 ± 1.1 kJ mol^?1 and ΔS⁰ = 167 ± 4 J K^?1 mol^?1. A mechanism in accordance with the experimental data is proposed for the reaction. © 1993 John Wiley & Sons, Inc.     

Laser flash photolysis of carboxymethylcellulose in an aqueous solution

Laser flash photolysis with excitation at 248 nm was used to study photochemically derived changes of carboxymethylcellulose (CMC) in aqueous solutions. Transient absorption spectra of solutions after photolysis revealed a broad band with a maximum of approximately 720 nm, which could be ascribed to the signal of the hydrated electron. The interaction of the hydrated electron with CMC was slow (<10⁷ dm³ mol^?1 s^?1), but the OH radical, formed by the decomposition of H₂O₂, reacted with CMC at a high rate constant (9.5–11.0 × 10⁸ dm³ mol^?1 s^?1). The rate constant of the reactions of CMC with hydroxyl radicals depended on the conformation of the macromolecules, which was determined by the pH of the solution. Transient absorption was recorded at a wavelength shorter than 370 nm for CMC solutions photolyzed in the presence of H₂O₂. As a result of OH attack, long‐lived radicals were formed on CMC. The recombination of macroradicals led to the formation of crosslinking bonds between side‐chain groups, and as a result of it an insoluble gel arose in low‐pH solutions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 505–518, 2005     

Kinetics and mechanism of the oxidation of iron(II) ion by chlorine dioxide in aqueous solution

The mechanism by which an excess of iron(II) ion reacts with aqueous chlorine dioxide to produce iron(III) ion and chloride ion has been determined. The reaction proceeds via the formation of chlorite ion, which in turn reacts with additional iron(II) to produce the observed products. The first step of the process, the reduction of chlorine dioxide to chlorite ion, is fast compared to the subsequent reduction of chlorite by iron(II). The overall stoichiometry is The rate is independent of pH over the range from 3.5 to 7.5, but the reaction is assisted by the presence of acetate ion. Thus the rate law is given by At an ionic strength of 2.0 M and at 25°C, k_u = (3.9 ± 0.1) × 10³ L mol^?1 s^?1 and k_c = (6 ± 1) × 10⁴ L mol^?1 s^?1. The formation constant for the acetatoiron(II) complex, K_f, at an ionic strength of 2.0 M and 25°C was found to be (4.8 ± 0.8) × 10^?2 L mol^?1. The activation parameters for the reaction were determined and compared to those for iron(II) ion reacting directly with chlorite ion. At 0.1 M ionic strength, the activation parameters for the two reactions were found to be identical within experimental error. The values of ΔH? and ΔS? are 64 ± 3 kJ mol^?1 and + 40 ± 10 J K^?1 mol^?1 respectively. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 554–565, 2004     

Spectrocoulometric study of the hydrolysis of the tris (1,10-phenanthroline)iron(III) complex ion

The spectrocoulometric technique reported earlier is applied to verify the mechanism and to evaluate the contributions k_Bi of the individual bases to the total rate constant k of the hydrolysis of the tris (1,10-phenanthroline) iron(III) complex, Fe (phen)³⁺₃. Both normal and “open-circuit” spectrocoulometric experiments are used. Partial rate constants for four bases in the acetate-buffered solutions are k_H2O=(3.4±1.2) × 10^?4s^?1 (k_H2O includes the H₂O concentration), k_OH=(1.20±0.06)×10⁷ mol^?1dm³s^?1, k_phen=(1.4±0.2) mol^?1dm³s^?1, k_Ac=(3.8±0.3)×10^?2 mol^?1dm³s^?1, at 25°C and ionic strength 0.5 mol dm^?3. The Fe(phen)³⁺³ hydrolysis, with (phen)₂ (H₂O) Fe-O-Fe (H₂O) (phen)⁴⁺² formation, is first order with respect to Fe (phen)³⁺³ and the bases present in the solution. The rate-determining step in the hydrolysis is the entry of a base to the coordinating sphere of the complex, as in the hydrolysis of the analogous 2,2′-bipyridyl complex.     

PRIMARY INTERMEDIATES IN THE PULSED IRRADIATION OF RETINOIDS

Abstract Laser flash photolysis and pulse radiolysis have led to the characterisation of several shortlived intermediates formed after irradiation of retinoic acid and retinyl acetate in hexane or methanol. For retinoic acid, the triplet state, wavelength maximum 440 nm, extinction coefficient 7.3 × 10⁴ dm³ mol^?1 cm^?1, decay constant 6.2 × 10⁵ s^?1, is formed with a quantum yield of 0.012 for 347 nm excitation. The radical cation, absorption maximum 590 nm, extinction coefficient ～7 × 10⁴ dm³mol^?1 cm^?1, is formed in a biphotonic process. The radical anion, absorption maximum 510nm in hexane, 480 nm in methanol where its extinction coefficient is 1.2 × 10⁵ dm³mol^?1 cm^?1, appears to decay partially in methanol into another longer-lived neutral radical, wavelength maximum 420 nm, by loss of OH^?. For retinyl acetate, the triplet state, absorption maximum 395 nm, extinction coefficient 7.9 × 10⁴dm³mol^?1 cm^?1, decay constant 1.2 × 10⁶s^?1 is formed with a quantum yield of 0.025 for 347 nm excitation. Monophotonic photoelimination of OCOCH₃? in methanol produces the retinylic carbenium ion, wavelength maximum 590 nm, whose decay is enhanced by ammonia, k ～ 2 × 10⁶ dm³ mol^?1 s^?1 and retarded by water. The radical cation also has a wavelength maximum at 590 nm, its extinction coefficient being ～ 1.0 × 10⁵ dm³mol¹ cm^?1. The long-lived transient absorption with maximum at 385 nm, extinction coefficient 1.0 × 10⁵ dm³mol^?1 cm^?1, obtained from the reaction of the solvated electron with retinyl acetate in methanol may be due to either the radical anion itself or more likely the radical resulting from elimination of OCOCH₃? from this anion. These results suggest that skin photosensitivity caused by retinyl acetate might be greater than that due to retinoic acid.     

Complexation kinetics of Fe2+ with 1,10‐phenanthroline forming ferroin in acidic solutions

The formation kinetics of ferroin is studied under varied acid conditions at 25°C and fixed ionic strength (0.48 mol dm^?3) under pseudo‐first‐order conditions with respect to Fe²⁺ by using the stopped‐flow technique. The reaction followed is first and third order with respect to Fe²⁺ and 1,10‐phenanthroline (phen)_T, respectively. Increasing the acid concentration retarded the reaction, and the reaction rate showed a positive salt effect. The rate‐limiting step involved the complexation of the phen or protonated phen with [Fe(phen)₂]²⁺ complex ion, leading to formation of [Fe(phen)₃]²⁺ ion. The observed retardation of the reaction rate with increasing [H⁺]₀ is due to the increased [phenH⁺]_eq and low reactivity of phenH⁺ with [Fe(phen)₂]²⁺ complex ion. Simulated curves for the acid variation experiments agreed well with the corresponding experimental curves and the estimated rate coefficients supporting the proposed mechanism. Relatively low energy of activation (26 kJ mol^?1) and high negative entropy of activation (?159.8 J K^?1 mol^?1) agree with the proposed mechanism and the formation of compact octahedral complex ion. © 2008 Wiley Periodicals, Inc. 40: 515–523, 2008     

Reduction Reaction of the Copper(II) Complex Bearing 1,3-Di(pyridine-2-carboxaldimino)propane (pitn) by Decamethylferrocene in Acetonitrile

The reduction reaction of the Cu(II)–pitn complex (pitn = 1,3-di(pyridine-2-carboxaldimino)propane) by decamethylferrocene [Fe(Cp*)₂] was examined in acetonitrile. The observed pseudo-first-order rate constants exhibited saturation kinetics with increasing excess amount of [Fe(Cp*)₂]. Detailed analyses revealed that the reaction is controlled by a structural change prior to the electron transfer step, rather than a conventional bimolecular electron transfer process preceded by ion pair (encounter complex) formation. The rate constant for the structural change was estimated to be 275 ± 13 s^?1 at 298 K (?H* = 33.3 ± 1.0 kJ·mol^?1, ?S* = 86 ± 5 J·mol^?1·K^?1), which is the fastest among gated reactions involving CuN₄ complexes. It was confirmed by EPR measurement and Conflex calculations that the dihedral angle between the two N–N planes is significantly large (40°) in solution whereas it is merely 17.14° in the crystal.     

Kinetics and mechanism of the inner-sphere reduction of hexachloroplatinate(IV) by dithionite in acetate buffer

The kinetics of reduction of hexachloroplatinate(IV) by dithionite have been examined spectrophotometrically in sodium acetate?Cacetic acid buffer medium in the temperature range 288?C303?K. The reaction is first order in both platinum(IV) species and dithionite. H⁺ ion has an inhibiting effect on the rate in the pH range 3.68?C4.80. The pseudo-first order rate constant increased upon increasing both ionic strength and dielectric constant. The suggested mechanism involves an initial transition state between two like charged ions, which then decomposes to give SO₃ ^2? through the intermediate formation of free radicals. The presence of free radicals was confirmed by performing the reaction in the presence of acrylamide. PtCl₆ ^2? is finally reduced to PtCl₄ ^2?, as confirmed by thermogravimetric analysis and IR spectrophotometry. The values of ?H^?? and ?S^?? associated with the rate-determining step have been calculated as 33?±?4?kJ?mol^?1 and ?141?±?7?JK?mol^?1, respectively. The values of ?H° and ?S° for the dissociation of HS₂O₄ ^? are 16?±?4?kJ?mol^?1 and ?14?±?7?JK?mol^?1, respectively.     

Kinetics of the photoaquation of Hexacyanoferrate(II) ion

Kinetics of the photoaquation of hexacyanoferrate(II) ion in aqueous solution were studied potentiometrically and spectrophotometrically. Supposing the simplest mechanism (see Fig. 3. in text), the photoaquation in alkaline medium can be well described. The value of the constants at pH = ll.0 are: ø = 0.8-1.0, k₆ = (3.0 ± 0.5) × 10^?8 s^?1 and k_?6 = 1.5 ± 0.2 mol^?1 dm₃ s^?1. To describe the photoaquation in neutral medium t was extended (k′ = 3.33 x 10² mol^?1 dm³s^?1). The quantum yield in acidic medium can be calculated by combination of ø values of different protonated complexes. The reversibility of photoaquation in alkaline medium is also explained by the scheme.     

Base hydrolysis of (αβ S)-(o-methoxy benzoato) (tetraethylenepentamine) cobalt(III) ion: A comparative study of the role of ion pairs and micelles

The kinetics of base hydrolysis of (αβ S)-(o -methoxy benzoato) (tetraethylenepentamine)cobalt(III) obeyed the rate law: k_obs = k_OH[OH^?], in the range 0.05 ? [OH^?]_T, mol dm^?3 ? 1.0, I = 1.0 mol dm^?3, and 20.0–40.0°C. At 25°C, k_OH = 13.4 ± 0.4 dm³ mol^?1 s^?1, ΔH^≠ = 93 ± 2 kJ mol^?1 and ΔS^≠ = 90 ± 5 JK^?1 mol^?1. Several anions of varying charge and basicity, CH₃CO₂^?, SO₃^2?, SO₄^2?, CO₃^2?, C₂O₄^2?, CH₂(CO₂)₂^2?, PO₄^3?, and citrate^3? had no effect on the rate while phthalate^2?, NTA^3?, EDTA^4?, and DTPA^5? accelerated the process via formation of the reactive ion pairs. The anionic (SDS), cationic (CTAB), and neutral (Triton X-100) micelles, however, retarded the reaction, the effect being in the order SDS> CTAB > Triton X-100. The importance of electrostatic and hydrophobic effects of the micelles on the selective partitioning of the reactants between the micellar and bulk aqueous pseudo-phases which control the rate are discussed. © 1994 John Wiley & Sons, Inc.