2,5‐Dimethyl‐6,7‐dihydrobenzo[h]pyrazolo[1,5‐a]quinazoline and 2‐tert‐butyl‐5‐methyl‐6,7‐dihydrobenzo[h]pyrazolo[1,5‐a]quinazoline

In both 2,5‐dimethyl‐6,7‐dihydrobenzo[h]pyrazolo[1,5‐a]quinazoline, C₁₆H₁₅N₃, (I), and 2‐tert‐butyl‐5‐methyl‐6,7‐dihydrobenzo[h]pyrazolo[1,5‐a]quinazoline, C₁₉H₂₁N₃, (II), which crystallizes with Z′ = 2 in the space group P, the non‐aromatic carbocyclic rings adopt screw‐boat conformations. The molecules of (I) are linked into chains of rings by a combination of C—H...N and C—H...π(arene) hydrogen bonds, while in (II) there are no hydrogen bonds of any kind.     

Diphosphapodanden, [12]‐, [15]‐ und [18]Diphosphacoronanden,Diphosphacryptand‐8 und Alkalimetall‐Komplexe

Diphosphapodands, [12]‐, [15]‐, and [18]Diphosphacoronands, Diphosphacryptand‐8, and Alkali‐Metal Complexes The cyclizing bis‐phosphonium‐salt formation of the open‐chain bis‐phosphine 17a (1,1,7,7‐tetrabenzyl〈P.O.P‐podand‐7〉) with diethylene glycol derived dibromide 13a yields the 12‐membered cyclic bis‐phosphonium salt 20 (4,4,10,10‐tetrabenzyl‐12〈O.P.O.P‐coronand‐4〉‐4,10‐diium dibromide) in yields as high as 50–60%. The 1,1,10,10‐tetrabenzyl〈P.O₂.P‐podand‐10〉 17b forms with 13a the 15‐membered cyclic bis‐phosphonium salt 21 (7,7,13,13‐tetrabenzyl‐15〈O₂.P.O.P‐coronand‐5〉‐7,13‐diium dibromide) with the same high yield. By quaternization of the bis‐phosphine 17b with triethylene glycol derived dibromide 13b , the 18‐membered 7,7,16,16‐tetrabenzyl‐18〈O₂.P.O₂.P‐coronand‐6〉‐7,16‐diium dibromide 24 is obtained in 50% yield, too. The Wittig reaction of the cyclic phosphonium salts with benzaldehyde yields the 12‐, 15‐, and 18‐membered cyclic bis‐benzylphosphine dioxides 9, 10 , and 11 as cis‐ and trans‐isomers beside trans‐stilbene. The 7,13‐dioxido‐7,13‐dibenzyl‐15〈O₂.P.O₂.P‐coronand‐5〉 10 forms a crystalline 1 : 1 Na‐complex 23 , which exists as a dimer. The structure of 23 was established by an X‐ray analysis and spectroscopic data. The 7,16‐dibenzyl‐18〈O₂.P.O₂.P‐coronand‐6〉 28 that is available by reduction of 11 with CeCl₃/LiAlH₄ reacts with triethylene glycol derived dibromide 13b under Ruggly Ziegler‐dilution conditions to give the bicyclic bis‐phosphonium salt 29 (1,10‐dibenzyl〈P[O₂]₃.P‐cryptand‐8〉‐1,10‐diium dibromide) in 18% yield. Again, by the Wittig procedure with benzaldehyde, the 7,16‐dioxido〈P[O₂]₃P‐cryptand‐8〉 12 is obtained as the first diphosphacryptand. The FD‐MS (CH₂Cl₂) of the cyclic bis‐phosphine dioxides 10 – 12 show that they exist as [2M+Na]⁺ complexes. The complex formation constants K_a of 9 – 11 with alkali‐metal cations are studied and compared with the complex formation of corresponding crown ethers.     

Indium‐Bridged [1]Ferrocenophanes

Indium‐bridged [1]ferrocenophanes ([1]FCPs) and [1.1]ferrocenophanes ([1.1]FCPs) were synthesized from dilithioferrocene species and indium dichlorides. The reaction of Li₂fc?tmeda (fc=(H₄C₅)₂Fe) and (Mamx)InCl₂ (Mamx=6‐(Me₂NCH₂)‐2,4‐tBu₂C₆H₂) gave a mixture of the [1]FCP (Mamx)Infc ( 4₁ ), the [1.1]FCP [(Mamx)Infc]₂ ( 4₂ ), and oligomers [(Mamx)Infc]_n ( 4 _n ). In a similar reaction, employing the enantiomerically pure, planar‐chiral (S_p,S_p)‐1,1′‐dibromo‐2,2′‐diisopropylferrocene ( 1 ) as a precursor for the dilithioferrocene derivative Li₂fc^iPr2, equipped with two iPr groups in the α position, gave the inda[1]ferrocenophane 5₁ [(Mamx)Infc^iPr2] selectively. Species 5₁ underwent ring‐opening polymerization to give the polymer 5 _n . The reaction between Li₂fc^iPr2 and Ar′InCl₂ (Ar′=2‐(Me₂NCH₂)C₆H₄) gave an inseparable mixture of the [1]FCP Ar′Infc^iPr2 ( 6₁ ) and the [1.1]FCP [Ar′Infc^iPr2]₂ ( 6₂ ). Hydrogenolysis reactions (BP86/TZ2P) of the four inda[1]ferrocenophanes revealed that the structurally most distorted species ( 5₁ ) is also the most strained [1]FCP.     

Phosphino[tris(trimethylsilyl)methyl]Boranes and 2,4‐Bis[tris(trimethylsilyl)methyl]‐1,3,2,4‐diphosphadiboretanes [1]

The reaction of tris(trimethylsilyl)methylboron dihalides (Me₃Si)₃CBX₂ (X = Cl, F) with the lithium phosphides LiPHtBu and LiPHmes leads to the phosphinoboranes (Me₃Si)₃CBX‐(PHR), (Me₃Si)₃CB(PHR)₂ or the 1,3,2,4‐diphosphadiboretanes [(Me₃Si)₃CB(PR)]₂, depending on the ratio of the reagents, the reaction temperature and concentration. High dilution and low temperatures are required for the synthesis of (Me₃Si)₃CB(Hal)PHR ( 1–3 ) in order to prevent the formation of (Me₃Si)₃CB(PHR)₂ ( 4 and 5 ). The latter compounds are best prepared in a two step phosphination from (Me₃Si)₃CBHal₂ and LiPHR. At higher temperatures the four‐membered 1,3,2,4‐diphosphadiboretanes [(Me₃Si)₃CB(PR)]₂ 6 and 7 are the most stable compounds. On the other hand, compounds of type (Me₃Si)₃CB(Hal)PR₂, 8 and 9 , are thermally more stable than the monophosphinoboranes 1 – 3 . Phosphinoboranes of type (Me₃Si)₃CB(PR₂)₂ (R = tBu, mes) could not be prepared. NMR and mass spectral data are in accord with the monomeric nature of compounds 1 to 9 .     

Neue Kronenether‐stabilisierte Oxoniumhalogenochalkogenate: [H3O(Dibromo‐benzo‐18‐Krone‐6)]2[Se3Br10] und [H5O2(Bis‐dibromo‐dibenzo‐24‐Krone‐8]2[Se3Br8]

Novel Oxonium Halogenochalcogenates Stabilized by Crown Ethers: [H₃O(Dibromo‐benzo‐18‐crown‐6)]₂[Se₃Br₁₀] and [H₅O₂(Bis‐dibromo‐dibenzo‐24‐crown‐8]₂[Se₃Br₈] Two novel complex oxonium bromoselenates(II,IV) and –(II) are reported containing [H₃O]⁺ and [H₅O₂]⁺ cations coordinated by crown ether ligands. [H₃O(dibromo‐benzo‐18‐crown‐6)]₂[Se₃Br₁₀] ( 1 ) and [H₅O₂(bis‐dibromo‐dibenzo‐24‐crown‐8]₂[Se₃Br₈] ( 2 ) were prepared as dark red crystals from dichloromethane or acetonitrile solutions of selenium tetrabromide, the corresponding unsubstituted crown ethers, and aqueous hydrogen bromide. The products were characterized by their crystal structures and by vibrational spectra. 1 is triclinic, space group (Nr. 2) with a = 8.609(2) Å, b = 13.391(3) Å, c = 13.928(3) Å, α = 64.60(2)°, β = 76.18(2)°, γ = 87.78(2)°, V = 1404.7(5) ų, Z = 1. 2 is also triclinic, space group with a = 10.499(2) Å, b = 13.033(3) Å, c = 14.756(3) Å, α = 113.77(3)°, β = 98.17(3)°, γ = 93.55(3)°. V = 1813.2(7) ų, Z = 1. In the reaction mixture complex redox reactions take place, resulting in (partial) reduction of selenium and bromination of the crown ether molecules. In 1 the centrosymmetric trinuclear [Se₃Br₁₀]^2? consists of a central Se^IVBr₆ octahedron sharing trans edges with two square planar Se^IIBr₄ groups. The novel [Se₃Br₈]^2? in 2 is composed of three planar trans‐edge sharing Se^IIBr₄ squares in a linear arrangement. The internal structure of the oxonium‐crown ether complexes is largely determined by the steric restrictions imposed by the aromatic rings in the crown ether molecules, as compared to complexes with more flexible unsubstituted crown ether ligands.     

EPR‐spektroskopische Charakterisierung (X‐, Q‐Band) monomerer AgII‐ und AuII‐Komplexe der Thiakronenether [12]anS4, [16]anS4, [18]anS6 und [27]anS9

EPR Spectroscopic Characterization (X‐, Q‐Band) of Monomeric Ag^II‐ and Au^II‐Complexes of the Thiacrownethers [12]aneS₄, [16]aneS₄, [18]aneS₆ and [27]aneS₉ The reaction of the prepared Ag^I complexes of the thiacrownethers [12]aneS₄, [16]aneS₄, [18]aneS₆ and [27]aneS₉ with c. H₂SO₄ as well as the reaction of [Au^IIICl₄]^‐ with [18]aneS₆ and [27]aneS₉ leads to labile Ag^II‐ (4d⁹, ^{107, 109}Ag: I=1/2) and Au^II‐ (5d⁹, ¹⁹⁷Au: I=3/2) thiacrownether complexes, respectively, which were characterized by X‐ and Q‐band EPR. The EPR spectra of [Ag^II([12]anS₄)]²⁺ and [Ag^II([18]anS₆)]²⁺ were reinvestigated. According to an analysis of the spin‐density distribution only 20 ‐ 25 % is located on the Ag or Au atoms. Most of the spin‐density was found to be on the S donor atoms of the thiacrownethers. The high delocalization of the spin‐density leads certainly to a noticeable reduction of the Ag^I/Ag^II redox potential and is considered as being mainly responsible for the easy accessibility of the Ag^II compounds.     

catena‐Poly[bis[1‐chloromethyl‐1,4‐diazoniabicyclo[2.2.2]octane] [cadmium(II)‐tri‐μ‐chlorido‐[chloridocadmium(II)]‐di‐μ‐chlorido‐[chloridocadmium(II)]‐tri‐μ‐chlorido] tetrahydrate]

The title compound, {(C₇H₁₅N₂Cl)₂[Cd₃Cl₁₀]·4H₂O}_n, consists of 1‐chloromethyl‐1,4‐diazoniabicyclo[2.2.2]octane dications, one‐dimensional inorganic chains of {[Cd₃Cl₁₀]⁴⁻} anions and uncoordinated water molecules. Each of the two independent Cd^II ions, one with site symmetry 2/m and the other with site symmetry m, is octahedrally coordinated by chloride ions (two with site symmetry m and one with site symmetry 2), giving rise to novel polymeric zigzag chains of corner‐sharing Cd‐centred octahedra parallel to the c axis. The organic cations, bisected by mirror planes that contain the two N atoms, three methylene C atoms and the Cl atom, are ordered. Hydrogen bonds (O—H...Cl and O—H...O) between the water molecules (both with O atoms in a mirror plane) and the chloride anions of neighbouring chloridocadmate chains form a three‐dimensional supramolecular network.     

Poly[aqua[μ4‐3,3′‐(diazenediyl)dibenzoato]zinc]

The solvothermal reaction of Zn(OAc)₂·2H₂O with 3,3′‐(diazenediyl)dibenzoic acid (H₂ADB) in H₂O at 393 K afforded the title complex, [Zn(C₁₄H₈N₂O₄)(H₂O)]_n. The asymmetric unit contains half a Zn^II cation, half an ADB ligand and half a water molecule. Each Zn^II centre lies on a crystallographic twofold rotation axis and is five‐coordinated by four O atoms of bridging carboxylate groups from four ADB ligands and one O atom from a water molecule, forming a distorted trigonal–bipyramidal coordination geometry. The [Zn(H₂O)] subunits are bridged by carboxylate groups to give one‐dimensional [Zn(μ‐COO)₄(H₂O)]_n chains. The chains are linked by ADB ligands into two‐dimensional sheets, and these sheets are further connected to neighbouring sheets via hydrogen bonds (OW—HW...O), forming a three‐dimensional hydrogen‐bond‐stabilized structure with an unprecedented 3⁷4¹⁷5²6² topology.     

Benzo[a]azulenediones and 10,10′‐Bibenzo[a]azulene

The oxidation of benzo[a]azulene ( 4 ) with commercial MnO₂ in dioxane/H₂O leads to a number of products in low yield (Table 1). Treatment of 4 with ‘mild’ MnO₂ (MnO₂/C) in dioxane/5% H₂O results in the formation of 10,10′‐bibenzo[a]azulene ( 18 ) in yields of up to 59% of isolated and purified material. Compound 18 exhibits atropisomerism and can be separated by HPLC on a Chiralcel column at room temperature into its stable antipodes (Fig.).     

catena‐Poly[1,4‐dihydroxy‐1,4‐diazoniabicyclo[2.2.2]octane [aquatri‐μ‐chlorido‐trichloridodicuprate(II)]]

The title compound, {(C₆H₁₄N₂O₂)[Cu₂Cl₆(H₂O)]}_n, consists of 1,4‐dihydroxy‐1,4‐diazoniabicyclo[2.2.2]octane dications and one‐dimensional inorganic anionic {[Cu₂Cl₆(H₂O)]²⁻}_n chains in which both five‐coordinate [CuCl₃(H₂O)]⁻ and five‐coordinate [CuCl₃]⁻ units exist. These two distinct type of unit are linked together by one chloride ion and are bridged across centres of inversion to further units of their own type through two chloride ions, giving rise to novel polymeric zigzag chains parallel to the c axis. The chains are connected by O—H...Cl hydrogen bonds to produce R₂⁴(16) ring motifs, resulting in two‐dimensional layers parallel to the ac plane. These layers are linked into a three‐dimensional framework with the organic cations via O—H...Cl hydrogen bonds. Hydrogen bonding between the chains, and between the chains and the organic cations, provides stability to the crystal structure.     

Cis‐1‐phosphabicyclo[3.3.0]octan

A new approach to 1‐phosphabicyclo[3.3.0]octane compounds starts from the reaction of 4‐chloro‐hepta‐1.6‐diene with Mg in THF. No Grignard rearrangement is observed. The Grignard reagent is converted into 1‐allyl‐3‐butenylphosphonous dichloride followed by reduction with LiAlH₄. Cis‐1‐phosphabicyclo[3.3.0]octane has been prepared by radical‐initiated cyclization of 1‐allyl‐3‐butenylphosphane. The bicyclic phosphane is characterized by analytical data as well as ³¹P and ¹³C NMR measurements and the reactionswith NO, S₈, KSeCN, CH₃I, Ni(CO)₄ and HSO₃F, respectively.     

catena‐Poly[bis­(tert‐butyl­ammonium) [plumbate(II)‐tri‐μ‐iodo] iodide dihydrate]

The title compound, {(C₄H₁₂N)₂[PbI₃]I·2H₂O}_n, crystallizes as an organic–inorganic hybrid. The six‐coordinate Pb atom lies on a centre of inversion and all the I atoms lie on mirror planes; the two independent cations both lie across mirror planes. The structure contains anionic chains along [100] of fused [PbI₃]⁻ units forming face‐sharing octa­hedra. Four cations enclose channels occupied by isolated iodide ions and water mol­ecules of hydration.     

Einkristalle von La[AsO4] im Monazit‐ und Sm[AsO4] im Xenotim‐Typ

Single Crystals of La[AsO₄] with Monazite‐ and Sm[AsO₄] with Xenotime‐Type Structure Brick‐shaped, transparent single crystals of colourless monazite‐type La[AsO₄] (monoclinic, P2₁/n, a = 676.15(4), b = 721.03(4), c = 700.56(4) pm, β =104.507(4)°, Z = 4) and pale yellow xenotime‐type Sm[AsO₄] (tetragonal, I4₁/amd, a = 718.57(4), c = 639.06(4) pm, Z = 4) emerge as by‐products from alkali and rare‐earth metal chloride fluxes whenever the synthesis of lanthanide(III) oxoarsenate(III) derivatives from admixtures of the corresponding sesquioxides in sealed, evacuated silica ampoules is accompanied by air intrusion and subsequent oxidation. Nine oxygen atoms from seven discrete [AsO₄]^3? tetrahedra recruit the rather irregular coordination sphere of La³⁺ (d(La³⁺?O^2?) = 248 – 266 pm plus 291 pm) and even a tenth ligand could be considered at a distance of 332 pm. The trigonal dodecahedral figure of coordination consisting of eight oxygen atoms at distances of 236 and 248 pm (4× each) about Sm³⁺ is provided by only six isolated tetrahedral [AsO₄]^3? units. Alternating trans‐edge condensation of the latter with the [LaO₉₊₁] polyhedra of monazite‐type La[AsO₄] and the [SmO₈] polyhedra of xenotime‐type Sm[AsO₄] constitutes the main structural chain features along [100] or [001], respectively. The bond distances and angles of the complex [AsO₄]^3? anions range within common intervals (d(As⁵⁺?O^2?) = 167 – 169 pm, ?(O–As–O) = 100 – 116°) for both lanthanide(III) oxoarsenates(V) presented here.     

Five bicyclo[3.3.0]octa‐2,6‐dienes

A series of five compounds containing the bicyclo[3.3.0]octa‐2,6‐diene skeleton are described, namely tetramethyl cis,cis‐3,7‐dihydroxybicyclo[3.3.0]octa‐2,6‐diene‐2,4‐exo,6,8‐exo‐tetracarboxylate, C₁₆H₁₈O₁₀, (I), tetramethyl cis,cis‐3,7‐dihydroxy‐1,5‐dimethylbicyclo[3.3.0]octa‐2,6‐diene‐2,4‐exo,6,8‐exo‐tetracarboxylate, C₁₈H₂₂O₁₀, (II), tetramethyl cis,cis‐3,7‐dimethoxybicyclo[3.3.0]octa‐2,6‐diene‐2,4‐exo,6,8‐exo‐tetracarboxylate, C₁₈H₂₂O₁₀, (III), tetramethyl cis,cis‐3,7‐dimethoxy‐1,5‐dimethylbicyclo[3.3.0]octa‐2,6‐diene‐2,4‐exo,6,8‐exo‐tetracarboxylate, C₂₀H₂₆O₁₀, (IV), and tetramethyl cis,cis‐3,7‐diacetoxybicyclo[3.3.0]octa‐2,6‐diene‐2,4‐exo,6,8‐exo‐tetracarboxylate, C₂₀H₂₂O₁₂, (V). The bicyclic core is substituted in all cases at positions 2, 4, 6 and 8 with methoxycarbonyl groups and additionally at positions 3 and 7 with hydroxy [in (I) and (II)], methoxy [in (III) and (IV)] or acetoxy [in (V)] groups. The conformations of the methoxycarbonyl groups at positions 2 and 4 are exo for all five compounds. Each C₅ ring of the bicyclic skeleton is almost planar, but the rings are not coplanar, with dihedral angles of 54.93 (7), 69.85 (5), 64.07 (4), 80.74 (5) and 66.91 (7)° for (I)–(V), respectively, and the bicyclooctadiene system adopts a butterfly‐like conformation. Strong intramolecular hydrogen bonds exist between the –OH and C=O groups in (I) and (II), with O...O distances of 2.660 (2) and 2.672 (2) Å in (I), and 2.653 (2) and 2.635 (2) Å in (II). The molecular packing is stabilized by weaker C—H...O(=C) interactions, leading to dimers in (I)–(III) and to a chain structure in (V). The structure series presented in this article shows how the geometry of the cycloocta‐2,6‐diene skeleton changes upon substitution in different positions and, consequently, how the packing is modified, although the intermolecular interactions are basically the same across the series.     

Synthesis and biological evaluation of benzo[7,8]chromeno[5,6‐b][1,4]oxazin‐3‐ones

The O‐methylmonoximes 2,3 of stenocarpoquinone‐A and β‐lapachone reacted with methyl phenylacetate to give 1,4‐benzoxazine derivatives 8a, 8b and oxazole 11a. Compound 8a was transformed to compounds 13_I , 13_II , 14. Treatment of compound 14 with osmium tetroxide afforded compounds 15 , 16 and esterification of the latter gave the bis‐ and mono‐ esters 17_I , 17_II , 18. All products are strongly fluorescent. Compounds 8a,b , 11a , 13–18 (azabenzo analogues of khellactones) were tested for their ability to interact with DPPH, to compete with dimethylsulfoxide for hydroxyl radicals, to inhibit soybean lipoxygenase and trypsin activities in vitro. Compounds 16 and 17_II were found to compete significantly with dimethylsulfoxide for hydroxyl radicals, whereas compounds 8a , 11a , 14 and 17_I were found to inhibit strongly soybean lipoxygenase.     

1‐Oxa‐nido‐dodecaborate [OB11H12]− from the Controlled Oxidation of the closo‐Borates [B11H11]2− and [B12H12]2−

The closo‐dodecaborate [B₁₂H₁₂]^2? is degraded at room temperature by oxygen in an acidic aqueous solution in the course of several weeks to give B(OH)₃. The degradation is induced by Ag²⁺ ions, generated from Ag⁺ by the action of H₂S₂O₈. Oxa‐nido‐dodecaborate(1?) is an intermediate anion, that can be separated from the reaction mixture as [NBzlEt₃][OB₁₁H₁₂] after five days in a yield of 18 %. The action of FeCl₃ on the closo‐undecaborate [B₁₁H₁₁]^2? in an aqueous solution gives either [B₂₂H₂₂]^2? (by fusion) or nido‐B₁₁H₁₃(OH)^? (by protonation and hydration), depending on the concentration of FeCl₃. In acetonitrile, however, [B₁₁H₁₁]^2? is transformed into [OB₁₁H₁₂]^? by Fe³⁺ and oxygen. The radical anions [B₁₂H₁₂] ^{˙ ?} and [B₁₁H₁₁] ^{˙ ?} are assumed to be the primary products of the oxidation with the one‐electron oxidants Ag²⁺ and Fe³⁺, respectively. These radical anions are subsequently transformed into [OB₁₁H₁₂]^? by oxygen. The crystal structure analysis shows that the structure of [OB₁₁H₁₂]^? is derived from the hypothetical closo‐oxaborane OB₁₂H₁₂ by removal of the B3 vertex, leaving a non‐planar pentagonal aperture with a three‐coordinate O vertex, as predicted by NMR spectra and theory.     

Influence of Cyclopentadienyl Ring‐Tilt on Electron‐Transfer Reactions: Redox‐Induced Reactivity of Strained [2] and [3]Ruthenocenophanes

In contrast to ruthenocene [Ru(η⁵‐C₅H₅)₂] and dimethylruthenocene [Ru(η⁵‐C₅H₄Me)₂] ( 7 ), chemical oxidation of highly strained, ring‐tilted [2]ruthenocenophane [Ru(η⁵‐C₅H₄)₂(CH₂)₂] ( 5 ) and slightly strained [3]ruthenocenophane [Ru(η⁵‐C₅H₄)₂(CH₂)₃] ( 6 ) with cationic oxidants containing the non‐coordinating [B(C₆F₅)₄]^? anion was found to afford stable and isolable metal?metal bonded dicationic dimer salts [Ru(η⁵‐C₅H₄)₂(CH₂)₂]₂[B(C₆F₅)₄]₂ ( 8 ) and [Ru(η⁵‐C₅H₄)₂(CH₂)₃]₂[B(C₆F₅)₄]₂ ( 17 ), respectively. Cyclic voltammetry and DFT studies indicated that the oxidation potential, propensity for dimerization, and strength of the resulting Ru?Ru bond is strongly dependent on the degree of tilt present in 5 and 6 and thereby degree of exposure of the Ru center. Cleavage of the Ru?Ru bond in 8 was achieved through reaction with the radical source [(CH₃)₂NC(S)S?SC(S)N(CH₃)₂] (thiram), affording unusual dimer [(CH₃)₂NCS₂Ru(η⁵‐C₅H₄)(η³‐C₅H₄)C₂H₄]₂[B(C₆F₅)₄]₂ ( 9 ) through a haptotropic η⁵–η³ ring‐slippage followed by an apparent [2+2] cyclodimerization of the cyclopentadienyl ligand. Analogs of possible intermediates in the reaction pathway [C₆H₅ERu(η⁵‐C₅H₄)₂C₂H₄][B(C₆F₅)₄] [E=S ( 15 ) or Se ( 16 )] were synthesized through reaction of 8 with C₆H₅E?EC₆H₅ (E=S or Se).     

Nanomagnetically modified thioglycolic acid (γ‐Fe2O3@SiO2‐SCH2CO2H): Efficient and reusable green catalyst for the one‐pot domino synthesis of spiro[benzo[a]benzo[6,7]chromeno[2,3‐c]phenazine] and benzo[a]benzo[6,7]chromeno[2,3‐c]phenazines

Superparamagnetic nanoparticles of modified thioglycolic acid (γ‐Fe₂O₃@SiO₂‐SCH₂CO₂H) represent a new, efficient and green catalyst for the one‐pot synthesis of novel spiro[benzo[a ]benzo[6,7]chromeno[2,3‐c ]phenazine] derivatives via domino Knoevenagel–Michael–cyclization reaction of 2‐hydroxynaphthalene‐1,4‐dione, benzene‐1,2‐diamines, ninhydrin and isatin. This novel magnetic organocatalyst was easily isolated from the reaction mixture by magnetic decantation using an external magnet and reused at least six times without significant loss in its activity. The catalyst was fully characterized using various techniques. This procedure was also applied successfully for the synthesis of benzo[a ]benzo[6,7]chromeno[2,3‐c ]phenazines.     

Two new heterocyclic [3.3.3.01,5]‐propellanoid compounds: 2,8‐dioxatricyclo[3.3.3.01,5]undecane‐3,7‐dione and a related dimer

2,8‐Dioxatri­cyclo­[3.3.3.0^1,5]­un­decane‐3,7‐dione, C₉H₁₀O₄, (I), is the dilactone acylal of cyclo­pentanone‐2,2‐di­acetic acid. Both mol­ecules in the asymmetric unit have conformational chirality and differ principally in the flexing of the carbon ring, which produces a resolvable conformational disorder in one of the mol­ecules. Three intermolecular C—H⋯O close contacts exist. 7,7′‐Oxybis(2,8‐dioxatri­cyclo­[3.3.3.0^1,5]­undecan‐3‐one), C₁₈H₂₂O₇, (II), a racemate, lies on a C₂ axis and is a non‐meso furan­osyl furan­oside dimer derived from the monoacid mono­aldehyde corresponding to (I). One intermolecular C—H⋯O close contact exists. Diminished intramolecular void space in these small propellanoids generates unusually high crystal density in both species, particularly (I).     

对叔丁基杯[10]冠醚的合成

首次合成一系列杯[10]冠醚。通过将对叔丁基杯[10]芳烃和乙二醇双对甲苯磺酸酯或多甘醇双对甲苯磺酸酯在K2CO3/甲苯或Cs2CO3/丙酮体系中反应,得到一系列杯[10]冠醚:1,2-杯[10]冠-4、1,3-杯[10]冠-2、1,2-,1,3-杯[10]冠-3、1,4-杯[10]冠-4、和1,6-杯[10]冠-4。