Michael-Addition Reaction of Malononitrile with α,β-Unsaturated Cycloketones Catalyzed by KF／Al2O3

A series of KF/Al2O3 catalyzed Michael-addition reactions between malononitrile and α,β-unsaturated cycloketones in DMF solution were studied. At room temperature, 2-cyano-3-aryl-3-(1,2,3,4-tetrahydronaphthalen-1-one-2-yl) propionitrile derivatives were synthesized by the reaction between 2-arylmethylidene-1,2,3,4-tetra-hydronaphthalen-1-one and malononitrile. However, if the temperature was increased to 80℃, 2-amino-3-cyano-4-aryl-4H-benzo[h]chromene derivatives were obtained in high yields. When the α,β-unsaturated ketones were replaced by 2,6-biarylmethylidenecyclohexanone or 2,5-biarylmethylidenecyclopentanone, another series of 2-amino-3-cyano-4H-pyran derivatives was isolated successfully. The structures of the products were confirmed by X-ray diffraction analysis.     

Siloles and Acetenyl Aromatics Copolymers: Synthesis,Characterization and Photophysical Properties

Two copolymers, poly(1,1‐dimethyl‐3,4‐diphenylsilole‐alt‐N‐hexyl‐3,6‐diethynylcarbazole) (PS‐DyCz) and poly(1,1‐dimethyl‐3,4‐diphenylsilole‐alt‐2,7‐diethynyl‐9,9′‐dihexylfluorene) (PS‐DyF), were synthesized by Sonogashira coupling reaction of 2,5‐dibromo‐1,1‐dimethyl‐3,4‐diphenylsilole and N‐hexyl‐3,6‐diethynylcarbazole or 2,7‐diethynyl‐9,9′‐dihexylfluorene, respectively. The chemical structures of the copolymers were characterized by NMR, FT‐IR techniques. Their thermal and photophysical properties were evaluated by TGA, DSC, UV‐Vis and fluorescence spectroscopy, respectively. The weight‐averaged molecular weights (M_w) of PS‐DyCz and PS‐DyF are 1.20×10⁴ and 3.83×10⁴ Da, respectively. The degree of polymerization is 8 and 22 units. These π‐conjugated polymers exhibited lower band‐gap of 2.25 and 2.70 eV due to the presence of silole rings and C?C triple bonds in their backbone, the results were consistent with the density functional (DFT) calculations at the B3LYP/6‐31G* level.     

Aromatic polyamides derived from unsymmetrical diamines containing the phthalazinone moiety

Two unsymmetrical and kink non‐coplanar heterocyclic diamines, 1,2‐dihydro‐2‐(4‐aminophenyl)‐4‐[4‐(4‐aminophenoxy)phenyl](2H)phthalazin‐1‐one and 1,2‐dihydro‐2‐(4‐aminophenyl)‐4‐[4‐(4‐aminophenoxy)‐3,5‐dimethylphenyl](2H) phthalazin‐1‐one, were successfully synthesized by readily available heterocyclic bisphenol‐like monomers through two steps in high yields. A series of novel poly(arylene ether amides)s containing the phthalazinone moiety with inherent viscosities of 1.16–1.67 dL/g were prepared by the direct polymerization of novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in a variety of solvents such as N,N‐dimethylformamide, N,N‐dimethylacctamide, dimethyl sulfoxide, N‐methyl‐2‐pyrrolidone, and even in pyridine, chloroform and m‐cresol. The glass‐transition temperatures were in the range of 291–329 °C, and the temperatures for 5% weight loss in nitrogen were above 490 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3489–3496, 2002     

Incorporation of fluorene‐based emitting polymers into silica

Novel polyfluorene copolymers with pendant hydroxyl groups, poly[2,7‐(9,9‐dihexylfluorene)‐2,7‐(9,9‐bis(6‐hydroxyhexyl)fluorene)‐co‐2,7‐(9,9‐dihexylfluorene)‐1,4‐phenylene] (PFP‐OH) and poly[2,7‐(9,9‐dihexylfluorene)‐2,7‐(9,9‐bis(6‐hydroxyhexyl)fluorene)‐co‐2,7‐(9,9‐dihexylfluorene)‐4,7‐(2,1,3‐benzothiadiazole)] (PFBT‐OH) were prepared. Acid‐catalyzed polycondensations of tetraethoxysilane were carried out in the presence of these polymers to obtain homogeneous hybrids. Photoluminescence spectra of these hybrids suggested the polymers were immobilized in silica matrix retaining their π‐conjugated structures. Further, hybrids of coat film were prepared utilizing perhydropolysilazane as a silica precursor. Their optical properties were examined. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Structural and Biological Properties of Vermistatin and Two New Vermistatin Derivatives Isolated from the Marine‐Mangrove Endophytic Fungus Guignardia sp. No. 4382

Vermistatin (=(3R)‐4,6‐dimethoxy‐3‐{4‐oxo‐6‐[(1E)‐prop‐1‐en‐1‐yl]‐4H‐pyran‐3‐yl}‐2‐benzofuran‐1(3H)‐one; 1 ) and two new vermistatin derivatives, compounds 2 and 3 , were isolated from the fungal strain Guignardia sp. No. 4382 obtained from the South‐China Sea. Their structures were elucidated by various methods, including circular dichroism (CD), 1D‐ and 2D‐NMR, and HR‐EI‐MS. The structures of 1 and 2 were unequivocally corroborated by X‐ray crystallography, and their absolute configurations were derived by CD spectroscopy based on a literature comparison. The in vitro cytotoxic and antifungal activities of 1 and 2 were tested.     

Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.     

Polar aspects of intramolecular interactions in 2‐amino‐5‐nitro‐4‐methylpyridines and 2‐amino‐3‐nitro‐4‐methylpyridines

The dipole moments of twelve 2‐N‐substituted amino‐5‐nitro‐4‐methylpyridines ( I‐XII ) and three 2‐N‐substituted amino‐3‐nitro‐4‐methylpyridines ( XIII‐XV ) were determined in benzene. The polar aspects of intramolecular charge‐transfer and intramolecular hydrogen bonding were discussed. The interaction dipole moments, μ_int, were calculated for 2‐N‐alkyl(or aryl)amino‐5‐nitro‐4‐methylpyridines. Increased alkylation of amino nitrogen brought about an intensified push‐pull interaction between the amino and nitro groups. The solvent effects on the dipole moments of 2‐N‐methylamino‐5‐nitro‐4‐methyl‐( I ), 2‐N,N‐dimethylamino‐5‐nitro‐4‐methyl‐ ( II ) and 2‐N‐methylamino‐3‐nitro‐4‐methylpyridines ( XIII ) were different. Specific hydrogen bond solute‐solvent interactions increased the charge‐transfer effect in I , but it did not disrupt the intramolecular hydrogen bond in XIII.     

Synthesis of chlorophyll‐a skeleton homologs using grignard reaction with methyl pyropheophorbide‐a

From methyl pyropheophorbide‐a (MPPa) (1), methyl 2‐formylmethyl‐2‐devinyl‐9‐ethylenedioxy‐9‐deoxopyropheophorbide‐a (2) and methyl 3‐acetyl‐9‐ethylenedioxy‐2‐devinyl‐9‐deoxopyropheophorbide‐a (3) were prepared. The Grignard reactions of 2 and 3 were performed using cycloalkyl magnesium bromides to afford cycloalkyl‐substituted sec‐alcohol 4 and tert‐alcohols 9a‐c, respectively. By the deprotection of the ethylenedioxy group, these alcohols were respectively converted to exocyclic ketones 5 and 10a‐c, which were dehydrated to give chlorins 6 and 11a‐c having an alkenyl function at the 2‐position. On the other hand, the oxidation and deprotection of the alcohol 4 gave a diketo chlorin 8.     

Synthesis,Characterization of Novel Bisheteroaryl Bisazo Dyes,and Their Dyeing and Solvatochromic Behavior

4‐Phenyl‐2‐aminothaizole was diazotized and coupled with N‐(alkyl)‐2‐oxo‐3‐cyano‐4‐methyl‐6‐hydroxypyridine (2‐pyridone). The resultant dyes were named as N‐(alkyl)‐6‐hydroxy‐4‐methyl‐2‐oxo‐5‐((4‐phenylthiazole‐2‐yl)diazenyl)‐1,2‐dihydro pyridine‐3‐carbonitrite and duly characterized. The diazotized aryl amines were then coupled to a moiety of above‐mentioned dyes at 5‐position of thiazole. The obtained bisheteroaryl azo dyes were characterized by elemental analysis and spectral studies. Solvent effects on the visible absorption spectra of the dyes were evaluated. The color of the dyes is discussed with respect to the nature of the heterocyclic ring, aromatic amines, and substituents present therein. All these dyes were applied as disperse dyes on to polyester fabrics, and their fastness properties were evaluated. © 2013 Wiley Periodicals, Inc. Heteroatom Chem 24:208–220, 2013; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21085     

Purines. Part XVI

A series of N‐substituted 8‐aminoxanthines (=8‐amino‐3,7(or 3,9)‐dihydro‐1H‐purine‐2,6‐diones) 8 – 16 and 34 – 37 were synthesized from the corresponding 8‐nitroxanthines 1 – 7, 30 – 33 , and 8‐(phenylazo)xanthines 17 and 18 by catalytic reduction. Another approach was derived from 6‐amino‐5‐(cyanoamino)uracils (=N‐(6‐amino‐1,2,3,4‐tetrahydro‐2,4‐dioxopyrimidin‐5‐yl)cyanamides) 23, 24 , and 27 by base‐catalyzed cyclization yielding 25 – 28 . All 8‐aminoxanthines 8 – 29 and 34 – 37 were acetylated to the corresponding 8‐(acetylamino)xanthines 40 – 57 , and prolonged heating led to 8‐(diacetylamino)xanthines 58 and 59 . Several 8‐aminoxanthines 8 – 13 were diazotized forming 8‐diazoxanthines 60 – 64 . Coupling reactions of isolated 62 and 64 and intermediary formed 8‐diazoxanthines with 1,3‐dimethylbarbituric acid (=1,3‐dimethylpyrimidine‐2,4,6(1H,3H,5H)‐trione; 66 ) resulted in 5‐[(xanthin‐8‐yl)diazenyl]‐1,3‐dimethylbarbituric acids=3,7(or 3,9)‐dihydro‐8‐[2‐(1,2,3,4‐tetrahydro‐1,3‐dimethyl‐2,4‐dioxopyrimidin‐5‐yl)diazenyl]‐1H‐purine‐2,6‐diones) 67 – 80 . The newly synthesized xanthine derivatives were characterized by the determination of their pK_a values, the UV‐ and NMR spectra, as well as elemental analyses.     

Sesquiterpenes and Other Metabolites from the Marine Red Alga Laurencia composita (Rhodomelaceae)

Two new halogenated sesquiterpenes, (8β)‐10‐bromo‐3‐chloro‐2,7‐epoxychamigr‐9‐en‐8‐ol ( 1 ) and 2‐bromo‐3‐chlorobisabola‐7(14),11‐diene‐6,10‐diol ( 3 ), and one new phytol‐derived diterpene, 2,3‐epoxyphytyl acetate ( 4 ), along with cis‐ and trans‐1‐methylcyclohexane‐1,4‐diol ( 5 and 6 ) which were isolated from a natural source for the first time but have been previously synthesized, were isolated from the marine red alga Laurencia composita and characterized. In addition, a known sesquiterpene, pacifenediol ( 2 ), and the known furanone derivative 7 were also identified. Their structures were established by NMR and mass spectroscopic methods.     

Reduction of 3‐Aminoquinoline‐2,4(1H,3H)‐diones and Deamination of the Reaction Products

3‐Aminoquinoline‐2,4‐diones were stereoselectively reduced with NaBH₄ to give cis‐3‐amino‐3,4‐dihydro‐4‐hydroxyquinolin‐2(1H)‐ones. Using triphosgene (=bis(trichloromethyl) carbonate), these compounds were converted to 3,3a‐dihydrooxazolo[4,5‐c]quinoline‐2,4(5H,9bH)‐diones. The deamination of the reduction products using HNO₂ afforded mixtures of several compounds, from which 3‐alkyl/aryl‐2,3‐dihydro‐1H‐indol‐2‐ones and their 3‐hydroxy and 3‐nitro derivatives were isolated as the products of the molecular rearrangement.     

1,6‐ and 1,7‐naphthyridines. IV. Synthesis of hydroxycarboxamide derivatives

A series of 8‐hydroxy‐1,6‐naphthyridin‐5(6H)‐one‐7‐carboxamides 1 and the isomeric 5‐hydroxy‐1,7‐naphthyridin‐8(7H)‐one‐6‐carboxamides 2 were synthesized. N‐Lactam unsubstituted compounds 1a‐c and 2a,b were obtained by alkoxide‐induced rearrangement of the corresponding quinolinimidoacetamides 3 . Compounds 1e,f and 2e,f were synthesized by heterocyclization of the corresponding quinolinamic esters 6 and 7 . Spectroscopic properties (uv, ir, ¹H and ¹³C nmr and ms) were analyzed and the proposed structures confirmed.     

The suzuki–heck polymerization as a tool for the straightforward obtainment of poly(fluorenylene‐vinylene) sensitizers for dye‐sensitized solar cells

This article describes the synthesis and properties of the first poly(arylene‐vinylene)‐based sensitizers for application in dye‐sensitized solar cells (DSSC). The polymers were prepared by the Suzuki–Heck copolymerization of potassium vinyltrifluoroborate (PVTB) with a mixture of dibromoaryl comonomers designed to obtain macromolecules able to bind onto the photoelectrode by means of carboxyphenylene units. The copolymerization reactions were carried out in the presence of an excess of PVTB to lower the molecular weights of the polymers, which were obtained as soluble materials. The polymers poly[(9,9‐didodecyl‐2,7‐fluorenylene)‐vinylene‐co‐(carboxy‐2,5‐phenylene)‐vinylene] ( P1 ), poly[(9,9‐didodecyl‐2,7‐fluorenylene)‐vinylene‐co‐(carboxy‐2,5‐phenylene)‐vinylene‐co‐(4,7‐benzothiadiazolylene)‐vinylene] ( P2 ), and poly[(9,9‐didodecyl‐2,7‐fluorenylene)‐vinylene‐co‐(carboxy‐2,5‐phenylene)‐vinylene‐co‐2,5‐thienylene‐vinylene] ( P3 ) were used in DSSC devices, obtaining conversion efficiencies up to 0.88% ( P3 ). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Two New 3,4‐Seco‐ent‐kaurenes and Other Constituents from the Costa Rican Endemic Species Croton megistocarpus

Following our phytochemical studies of Costa Rican plants, we report the isolation of two new 3,4‐seco‐ent‐kaurenes from the aerial parts of Croton megistocarpus (Euphorbiaceae). The structures of the two compounds were elucidated as 14‐[(2‐methylbutanoyl)oxy]‐3,4‐seco‐ent‐kaura‐4(19),16‐dien‐3‐oic acid ( 1 ) and 14‐{[(2Z)‐2‐methylbut‐2‐enoyl]oxy}‐3,4‐seco‐ent‐kaura‐4(19),16‐dien‐3‐oic acid ( 2 ). In addition, seven known diterpene clerodanes were also isolated and identified. The structures of the compounds were elucidated by spectroscopic methods, including HR‐MS, ¹H‐NMR, ¹³C‐NMR, COSY, HMQC, HMBC, and NOESY experiments.     

Increasing the hydrophilicity of star‐shaped amphiphilic co‐networks by using of PEG and dendritic s‐PCL cross‐linkers

New hyperbranched hydrophobic cross‐linkers with peripheral azide groups were synthesized as follows: First, star‐shaped polycaprolactones (sPCL) were synthesized by ring‐opening polymerization of caprolactone in the presence of pentaerythritol and tin (II) octoate. In the next step, sequential acrylation, Micheal addition, tosylation, and azidation by acryloyl chloride, diethanol amine, tosyl chloride, and sodium azide were respectively exploited to synthesize azide‐functionalized hyperbranched star‐shaped polycaprolactones which were named sPCL‐acrylate‐diethanolamine‐azide (sPCL‐AC‐DEA‐N₃) and sPCL‐acrylate‐diethanolamine‐acrylate‐diethanolamine‐azide (sPCL‐AC‐DEA‐AC‐N₃). All steps were thoroughly characterized by FT‐IR and ¹H NMR spectroscopy. The GPC analysis showed that the molecular weight of sPCL increased after two azide functionalizations. Amphiphilic hydrogels based on sPCL‐AC‐DEA‐N₃ (M_n = 8130 g/mol) and sPCL‐AC‐DEA‐AC‐N₃ (M_n = 10112 g/mol) with linear alkyne‐terminated polyethylene glycols (PEG) (M_n = 2000, 4000, and 6000 g/mol) were synthesized through click coupling between azide and alkyne groups. In both hydrogels, the swelling ratio increased by increasing the molecular weight of PEG. The obtained results showed that the branching of the cross‐linker, significantly affected the swelling ratio of hydrogels. For instance, the swelling ratio of sPCL‐AC‐DEA‐AC‐N₃ and PEG‐6000 (Q = 900) was higher than sPCL‐AC‐DEA‐N₃ and PEG‐6000 (Q = 600). Despite the high cross‐linking density of sPCL‐AC‐DEA‐AC‐DEA‐N₃–based hydrogels, the amount of released theophylline was higher than sPCL‐AC‐DEA‐N₃–based hydrogels, due to the high content of PEG in these hydrogels.     

Four New Cucurbitacins from the Fruit of Momordica charantia

Four new 5β,19‐epoxycucurbitacins, kuguacins T–W ( 1 – 4 , resp.), along with nine known cucurbitane derivatives, 5 – 13 , were obtained from the fresh fruit of Momordica chrantia. Structures of the new metabolites were elucidated as 5β,19‐epoxy‐25‐hydroxycucurbitane‐3,7,23‐trione ( 1 ), 5β,19‐epoxy‐3,7‐dioxo‐23,24,25,26,27‐pentanorcucurbitan‐22‐oic acid ( 2 ), 5β,19‐epoxy‐3β‐hydroxycucurbit‐24‐ene‐7,23‐dione ( 3 ), and 5β,19‐epoxy‐25‐hydroxycucurbit‐23‐ene‐3,7‐dione ( 4 ), by extensive spectroscopic investigations, which were confirmed by a single‐crystal X‐ray diffraction analyses in the case of compound 4 .     

Poly(arylether amides) and poly(aryletherketone amides) via aromatic nucleophilic substitution reactions of self‐polymerizable AB and AB2 monomers

Two new extended self‐polymerizable AB monomers, N‐(4‐fluorobenzoyl)‐4‐amino‐4′‐hydroxydiphenylether and N‐(4‐fluorobenzoyl)‐4‐amino‐4′‐hydroxybiphenyl, were prepared. The monomers were homopolymerized and copolymerized to high‐molecular‐weight, linear poly(arylether amides) in N‐methylpyrrolidone (NMP)/toluene in the presence of potassium carbonate at elevated temperature. The polymers retained NMP up to 200 °C. Samples containing small amounts of the solvent (5–10 wt %) were soluble in polar aprotic solvents. However, after complete removal of the NMP, the polymers were only soluble in strong acids such as sulfuric acid and methanesulfonic acid (MSA). The polymers, which had intrinsic viscosities of 0.57–1.49 dL/g (30.1 ± 0.1 °C in MSA), were semicrystalline with melting temperatures above 400 °C. Two new self‐polymerizable AB₂ amide monomers, N,N′‐bis(4‐fluorobenzoyl)‐3,4‐diamino‐4′‐hydroxydiphenylether and N,N′‐bis(4‐fluorobenzoyl)‐3,5‐diamino‐4′‐hydroxybenzophenone, were also prepared and polymerized to give a hyperbranched poly(arylether amide) and a hyperbranched poly(aryletherketone) amide. The arylfluoride‐terminated, amorphous polymers had intrinsic viscosities of 0.34 and 0.24 dL/g (30.0 ± 0.1 °C in m‐cresol), glass‐transition temperatures of 210–269 °C, and were soluble in a wide variety of organic solvents. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis indicated that the components of the low‐molecular‐weight fractions contained cyclic structures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2374–2389, 2003     

Halogenated Sesquiterpenes from the Marine Red Alga Laurencia saitoi (Rhodomelaceae)

Four new halogenated sesquiterpenes, 10‐bromo‐3‐chloro‐2,7‐epoxychamigr‐9‐en‐8α‐ol ( 1 ), 2,10β‐dibromochamigra‐2,7‐dien‐9α‐ol ( 2 ), (9S)‐2‐bromo‐3‐chloro‐6,9‐epoxybisabola‐7(14),10‐diene ( 3 ), and (9R)‐2‐bromo‐3‐chloro‐6,9‐epoxybisabola‐7(14),10‐diene ( 4 ), were characterized from the marine red alga Laurencia saitoi. In addition, two known halosesquiterpenes, 2,10‐dibromo‐3‐chlorochamigr‐7‐en‐9α‐ol ( 5 ) and isolaurenisol ( 6 ), were also isolated and identified. Their structures were established on the basis of extensive analysis of spectroscopic data.     

Triumfettosterol Id and Triumfettosaponin,a New (Fatty Acyl)‐Substituted Steroid and a Triterpenoid ‘Dimer’ Bis(β‐D‐glucopyranosyl) Ester from the Leaves of Wild Triumfetta cordifolia A. Rich. (Tiliaceae)

Two new triterpenoid derivatives were isolated from the leaves of wild Triumfetta cordifolia A. Rich . and identified to be a (fatty acyl)‐substituted steroid 1 and a triterpenoid saponin ‘dimer’ 2 , named (3β)‐stigmasta‐5,22‐diene‐3,29‐diol 3‐propanoate 29‐triacontanoate and (2α,3β,19α)‐2,3,19‐trimethoxyurs‐12‐ene‐24,28‐dioic acid 24‐[(2α,3β)‐24,28‐bis(β‐D ‐glucopyranosyloxy)‐2‐hydroxy‐24,28‐dioxours‐12‐en‐3‐yl] ester, respectively. These compounds were obtained together with a mixture of known sterols (stigmasterol/β‐sitosterol=(3β,22E)‐stigmasta‐5,22‐dien‐3‐ol/(3β)‐stigmast‐5‐en‐3‐ol) and trans‐tiliroside ( 3 ). The structures 1 and 2 were determined on the basis of NMR data (¹H‐, ¹³C‐, and 2D‐NMR analyses) and mass spectrometry and confirmed by chemical transformations. The antimicrobial activities of trans‐tiliroside ( 3 ) against eight bacterial and two fungal strains were evaluated. This compound showed weak activities on some bacterial strains.