Ni-Al layered double hydroxides electrodeposition from a chloride solution

Ni-Al LDHs was electrodeposited from a NiCl₂-AlCl₃ solution. In order to analyze the electrodeposition process, electrolytes with initial Al content range of 0–20% were used. With increasing Al content in the sample, the preferred orientations of (0 0 3) and (0 0 6), increased crystallinity, and decreased interlayer spacing were observed from the XRD results. A dissolution–recrystallization of (0 0 3) plane was detected among the Ni-Al LDHs from the strongly alkaline solution soaking results, which was found to be conducted easily in high Al-containing samples. The pH of the Al-containing electrolyte was much lower than that of pure NiCl₂ solution because lower pH was needed to start a precipitation reaction in the AlCl₃-NiCl₂ solution. The electrodeposition yield and current efficiency were found to decrease obviously in the electrolytes with initial Al content higher than 10%, which was attributed to the increasing Al content in the sample and diffusion of the complex ions. The electrodeposition pattern was in-situ in the electrolyte initially containing 10% Al, then, it developed toward and off in-situ in electrolytes initially containing 0–10% and 10–20% Al.     

Catalytic performance of Ni-Al layered double hydroxides in CO purification processes

Ni-Al layered double hydroxides with Ni²⁺/Al³⁺ molar ratios of 1.5 and 3.0 have been synthesized by co-precipitation and studied as catalyst precursors for purification of CO-containing gas-mixtures by means of CO oxidation to CO₂ and conversion of CO by water vapor (water-gas shift reaction). The influence of the alkali additives (K⁺ ions) on the water-gas shift activity has been also examined. It was established that the catalytic activity of both reactions increases with the temperature and the nickel content. Hypothetic schemes are proposed about activation of the catalysts in the WGSR and CO oxidation including redox Ni²⁺ ? Ni³⁺ transition on the catalyst surface. The activity in WGSR is positively affected by the presence of potassium promoter, depending on its amount. The sample with higher nickel loading is the most effective catalyst as for CO oxidation as well as for WGSR at intermediate temperatures after potassium promotion.     

Effect of hydrothermal treatment on properties of Ni-Al layered double hydroxides and related mixed oxides

The Ni-Al layered double hydroxides (LDHs) with Ni/Al molar ratio of 2, 3, and 4 were prepared by coprecipitation and treated under hydrothermal conditions at 180 °C for times up to 20 h. Thermal decomposition of the prepared samples was studied using thermal analysis and high-temperature X-ray diffraction. Hydrothermal treatment increased significantly the crystallite size of coprecipitated samples. The characteristic LDH diffraction lines disappeared completely at ca. 350 °C and a gradual crystallization of NiO-like mixed oxide was observed at higher temperatures. Hydrothermal treatment improved thermal stability of the Ni2Al and Ni3Al LDHs but only a slight effect of hydrothermal treatment was observed with the Ni4Al sample. The Rietveld refinement of powder XRD patterns of calcination products obtained at 450 °C showed a formation of Al-containing NiO-like oxide and a presence of a considerable amount of Al-rich amorphous component. Hydrothermal aging of the LDHs resulted in decreasing content of the amorphous component and enhanced substitution of Al cations into NiO-like structure. The hydrothermally treated samples also exhibited a worse reducibility of Ni²⁺ components. The NiAl₂O₄ spinel and NiO still containing a marked part of Al in the cationic sublattice were detected in the samples calcined at 900 °C. The Ni2Al LDHs hydrothermally treated for various times and related mixed oxides obtained at 450 °C showed an increase in pore size with increasing time of hydrothermal aging. The hydrothermal treatment of LDH precursor considerably improved the catalytic activity of Ni2Al mixed oxides in N₂O decomposition, which can be explained by suppressing internal diffusion effect in catalysts grains.     

Photoactive oriented films of layered double hydroxides

The treatment of nano-ordered oriented films of layered double hydroxide (LDH) with dodecyl sulfate increased the interlayer distance from 0.4 to 1.96 nm, which allowed the intercalation of 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS). The re-stacking of separated layers and the rebuilding of crystals oriented parallel to the surface of quartz slides was confirmed by X-ray diffraction and atomic force microscopy. The hybrid films contained homogeneously distributed porphyrin molecules with preserved photophysical properties such as fluorescence, triplet state formation, and energy transfer, thus forming singlet oxygen.     

Cyclodextrin-intercalated layered double hydroxides for fragrance release

In order to attain the controlled release of fragrance, the intercalation of cyclodextrins (CDs) and fragrance in layered double hydroxides (LDHs) was examined. Carboxymethyl-β-CDs (CMCDs) of various degrees of substitution as well as Mg–Al support were synthesized. CMCDs were intercalated into LDH by the reconstruction method. Powder X-ray diffraction, thermal gravimetric analyses and Fourier transform infrared indicated a successful intercalation of CMCDs into the LDH gallery. The retention capacities of the hybrid materials were investigated in aqueous phase and in gaseous solution by static headspace gas chromatography and multiple headspace extraction. The functionalization of the LDH with CMCD allowed the encapsulation of various organic guests and could prolong the fragrance release time in comparison to that from LDH without CMCD, which can be attributed to the inclusion of the fragrance compound in the CMCD cavity.     

Thermal decomposition of silylated layered double hydroxides

Anionic surfactant and silane modified layered double hydroxides (LDHs) were synthesized through an in situ coprecipitation method. The structure and morphology were characterized by XRD and TEM techniques, and their thermal decomposition processes were investigated using infrared emission spectroscopy (IES) combined with thermogravimetry (TG). The surfactant modified LDHs (H-DS) shows three diffractions located at 1–7° (2θ), while there is only one broad reflection for silane grafted LDHs (H–Si) in this region. The morphologies of the H-DS and H–Si show fibrous exfoliated layers and curved sheets, respectively. The IES spectra and TG curves indicate that alkyl chain combustion and dehydroxylation are overlapped with each other during heating from 373 to 723 K in H-DS and to 873 K in H–Si. Sulfate anion transformation process occurs at 473 K in H-DS and 523 K in H–Si. The derivant of sulfate can exist even above 1073 K. After further decomposition, the metal oxides and the new type of Si–O compounds are formed beginning at around 923 K in silane modified sample.     

Mechano-hydrothermal preparation of Li-Al-OH layered double hydroxides

A mechano-hydrothermal (MHT) method was used to synthesize Li-Al-OH layered double hydroxides (LDHs) from LiOH·H₂O, Al(OH)₃ and H₂O as starting materials. A two-step synthesis was conducted, that is, Al(OH)₃ was milled for 1 h, followed by hydrothermal treatment with LiOH·H₂O solution. Effects of the LiOH/Al(OH)₃ molar ratio (R_Li/Al) and hydrothermal temperature (T_ht) on the crystallinity, morphology, and composition of the product were examined. The resulting LDHs were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared, and elemental analyses. The results showed that pre-milling plays a key role in the LDH formation during subsequent hydrothermal treatment. The Li/Al molar ratio of the obtained LDHs keeps constant at 0.5, independent from theR_Li/Al (0.5–5.0) in the starting materials. An increase in the T_ht (20–80 °C) can enhance the crystallinity and morphology regularity of the products. The so-obtained Li-Al-OH LDHs exhibit high crystallinity and well-dispersity, which may have wider applications than the aggregate ones obtained using conventional mechanochemical and Li⁺-imbibition methods.     

金属氢氧化物直接制备对苯二甲酸插层水滑石及其应用

以新制备的Mg(OH)_2和Al(OH)_3滤饼与对苯二甲酸通过水热反应制备了对苯二甲酸插层水滑石(TALDHs).使用X射线衍射(XRD)、热重-差热分析、扫描电镜(SEM)等技术对TA-LDHs与碳酸根型水滑石(CO3-LDHs)进行对比研究,结果显示,对苯二甲酸离子成功插入到LDHs层间,产物结构完整、晶相单一,所制得的TA-LDHs为片状.CO3-LDHs和TA-LDHs分别作为纳米填料,以两种不同的添加方式制备聚对苯二甲酸乙二醇酯(PET)/LDHs纳米复合材料.对复合材料进行XRD和SEM研究,结果表明在酯交换反应前添加2%TA-LDHs所制备的PET/LDHs纳米复合材料的层板被部分剥离,分散性最好.     

In situ polymerisation of monomers in layered double hydroxides

Vinyl or amino-benzene sulfonates (VBS and ABS) are polymerised in situ after a soft thermal treatment (T = 473 K) between the sheets of layered double hydroxides (LDH). The reaction of polymerisation is studied either by ¹³C CP- MAS NMR or ESR spectroscopies. The resonance peak associated to the vinyl group disappears from the VBS/LDH hybrid material, and conversely, a narrow signal, characteristic of free radicals, is observed for the ABS/LDH system. To cite this article: E.M. Moujahid, C. R. Chimie 6 (2003).     

Hybrid and biohybrid layered double hydroxides for electrochemical analysis

Layered double hydroxides (LDH) are lamellar materials that have been extensively used as electrode modifiers. Nanostructured organic–inorganic materials can be designed by intercalation of organic or metallic complexes within the interlayer space of these materials or by the formation of composite materials based on biopolymers (alginate or chitosan) or biomolecules, such as enzymes. These hybrid or biohybrid materials have interesting properties applicable in electroanalytical devices. From an exhaustive review of the literature, the relevance of these hybrid and biohybrid LDH materials as electrode materials for electrochemical detection of species with an environmental or health impact is evaluated. The analytical characteristics (sensitivity and detection limit) of LDH-based amperometric sensors or biosensors are scrutinized.

Synthesis and intracrystalline oxidation of nitrite-intercalated layered double hydroxides

Nitrite-intercalated LDHs could be prepared by a two-stage process that involves coprecipitation in the presence of nitrite ions followed by stirring the product with excess of nitrite ions. The nitrite ion lies flat in these LDHs with its c₂-axis lying approximately perpendicular to the crystallographic c-axis. The interlayer nitrite ions in these LDHs could be quantitatively oxidized to nitrate ions using H₂O₂ solution. In the LDHs thus obtained the nitrate ion lies flat with its c₃-axis parallel to the crystallographic c-axis (D_3h symmetry) in the interlayer region resulting in lower basal spacing.     

Incorporation of phosphorus oxyacids into layered double hydroxides

Four phosphonate anions (methyl-, ethyl-, phenyl- and benzylphosphonate) were successfully incorporated into [Cu₂Cr(OH)₆]Cl·yH₂O. It was found that two phases exist for the phenylphosphonate intercalate; one in which the anions are arranged perpendicular to the layers, and one with a tilted orientation. Systematic variation of the reaction conditions allowed the former to be isolated with phase purity, but not the latter. The solid-state ³¹P NMR data suggest that proton transfer may occur between host and guest. Some neutral guest is incorporated in the case of phenylphosphonate and benzylphosphonate, presumably owing to relatively poor solvation of these guests. Heat treatments only resulted in the formation of a covalent bond between host and guest in the case of the methylphosphonate intercalate. The intercalation of the related and redox-active phenylphosphinate into a range of LDHs is also reported. Time-resolved in situ diffraction techniques were used to both monitor and quantify the intercalation of phenylphosphonate into [Cu₂Cr(OH)₆]Cl·yH₂O and phenylphosphinate into the hexagonal form of [LiAl₂(OH)₆]Cl·yH₂O. Kinetic and mechanistic parameters have been determined from the diffraction data.     

Single-step synthesis of layered double hydroxides ultrathin nanosheets

A novel single-step approach was developed to prepare large-scale MgAl-LDHs ultrathin nanosheets. The key point of the successful realization was that we employed a high concentration of H(2)O(2). Oxygen molecules, derived from in situ decomposition of H(2)O(2), were speculated to be the decisive factor leading to complete separation of LDHs layers. The ultrathin nanosheets were characterized by XRD, TEM, AFM, FT-IR, and TG-DSC. The results indicated that the thickness of these nanosheets was about 1.44 nm, which was almost in perfect agreement with the theoretical thickness of two LDHs layers. From the TG-DSC curves, the weight loss of these exfoliated MgAl-LDHs ultrathin nanosheets at 500°C was 18.5%, which was much smaller compared to the 32.3% weight loss of unexfoliated MgAl-LDHs.     

Carboxylate-intercalated layered double hydroxides aged under microwave-hydrothermal treatment

Carboxylate-intercalated (terephthalate, TA and oxalate, ox) layered double hydroxides (LDHs) are aged under a microwave-hydrothermal treatment. The influence of the nature of the interlayer anion during the ageing process is studied. Characterization results show that the microwave-hydrothermal method can be extended to synthesize LDHs with anions different than carbonate, like TA. LDH-TA compounds are stable under microwave irradiation for increasing periods of time and the solids show an improved order both in the layers and in the interlayer region as evidenced by powder X-ray diffraction (PXRD), ²⁷Al MAS NMR and FT-IR spectroscopy. Furthermore, cleaning of the surface through removal of some organic species adsorbed on the surface of the particles also occurs during the microwave-hydrothermal treatment. Conversely, although the expected increase in crystallinity is observed in LDH-ox samples, the side-reaction between Al³⁺ and ox is also enhanced under microwave irradiation, and a partial destruction of the structure takes place with an increase in the M²⁺/M³⁺ ratio and consequent modification of the cell parameters.     

Intercalation of dodecyl sulfate into layered double hydroxides

The intercalation of sodium dodecyl sulfate and exchange of dodecyl sulfate anion into layered double hydroxides has been examined by means of X-ray diffraction, infrared and thermogravimetric procedures. Three types of derivatives were obtained having mean interlayer spacings of 26 Å, 36 Å and 47 Å, respectively. These interlayer distances did not correlate with the amount of organic incorporated between the layers but, as shown by computer simulations, depended upon the orientation of the chains within the interlamellar space. In several reactions both intercalation of neutral sodium dodecyl sulfate as well as exchange of the dodecyl anion took place. Attempts to remove the alkyl sulfate chains with dilute acid resulted in dissolution of the more basic metals producing non-stoichiometric layered products.     

Fe-Al layered double hydroxides in bromate reduction: Synthesis and reactivity

This study presents a rare use of layered double hydroxides of Fe(II) and Al(III) (Fe-Al LDH), as reported for the first time for bromate removal from aqueous solutions. The Fe-Al LDH samples were prepared with Fe/Al molar ratios of 1-4 using a co-precipitation method at pH 7, with subsequent hydrothermal treatment at 120°C. The Fe-Al LDH (molar ratio of Fe/Al=1, 2) with a layered structure exhibited nearly complete removal of bromate from initial concentration of 100μmol/dm(3) at a wide pH range of 4.0-10.5 over a 2h reaction period; the residual bromate concentration in the solution was lower than the detection limit of 0.07μmol/dm(3) (9μg-BrO(3)(-)/dm(3)). During the reaction period, bromide was released into the solution via a reduction process. Reactivity of Fe-Al LDH with a Fe/Al molar ratio of 2 did not decrease the bromate reduction efficiency during 30days.     

Exfoliation and immobilization of anionic iron porphyrin in layered double hydroxides

Mg-Al layered double hydroxide (LDH) intercalated with glycinate anions was synthesized through co-precipitation and exfoliated in formamide and the single-layer suspension was reacted with an aqueous iron porphyrin (FeTDFSPP) solution. The new composite was characterized by powder X-ray diffraction, UV-vis, FTIR, and electron paramagnetic spectroscopies and thermal analyses (simultaneous TG/DSC). The analyses demonstrated that glycinate anions continue to be intercalated and the anionic iron porphyrin is adsorbed at the surface of the layered double hydroxide crystals.     

Structure and photoluminescence of Mg-Al-Eu ternary hydrotalcite-like layered double hydroxides

A series of Mg-Al-Eu ternary hydrotalcite-like layered double hydroxides (LDHs), with Eu/Al atomic ratios of ∼0.06 and Mg/(Al+Eu) atomic ratios ranging from 1.3 to 4.0, were synthesized by a coprecipitation method. The Mg-Al-Eu ternary LDHs were investigated by various techniques. X-ray diffraction (XRD) results indicated that the crystallinity of the ternary LDHs was gradually improved with the increase of Mg²⁺/(Al³⁺+Eu³⁺) molar ratio from 1.3/1 to 4/1, and all the samples were a single phase corresponding to LDH. The photoluminescent (PL) spectra of the ternary Mg-Al-Eu LDHs were described by the well-known ⁵D₀-⁷F_J transition (J=1, 2, 3, 4) of Eu³⁺ ions with the strongest emission for J=2, suggesting that the host LDH was favorable to the emissions of Eu³⁺ ions. The asymmetry parameter (R) relevant to ⁵D₀-⁷F_J transition (J=1, 2) dependant of the atomic ratios of Mg²⁺/(Al³⁺+Eu³⁺) was discussed, and was consistent with the result of XRD.