Formation of 1,6-diazathianthrene by photolysis of 1-hydroxy-2-pyridinethione

The spectral properties of the dimer produced by the photolysis of a methanolic solution of 1-hydroxy-2-pyridinethione at 365 nm is investigated and its structure was assigned to 1′,4′,6′,9′-tetrahydro-1,6-diazathianthrene. Under certain conditions this compound loses 2 molecules of water to give 1,6-diazathianthrene.     

1,6‐ and 1,7‐Regioisomers of Dicyano‐Substituted Perylene Bisimides: Synthesis,Optical and Electrochemical Properties

In this study, 1,6‐ ad 1,7‐regioisomers of dicyano‐substituted perylene bisimides (1,6‐ C and 1,7‐ C ) were synthesized and successfully isolated from their regioisomeric mixture using conventional methods of separation, and subsequently characterized by 400 MHz ¹H NMR spectroscopy. This is the first time that the 1,6‐dicyanoperylene bisimide 1,6‐ C has been obtained in pure form. Moreover, the optical and electrochemical properties of 1,6‐ C and 1,7‐ C were found to be virtually the same. Time‐dependent density functional theory calculations performed on both dyes are reported in order to rationalize their electronic structures and optical properties.     

Synthesen,chemische und elektrische Eigenschaften von Tetrathiafulvalen mit 1,6-Methano[10]annulen-Partialstruktur und von Chalcogendiimid-derivaten

Syntheses, Chemical and Electrical Properties of Tetrathiafulvalene with a 1,6-Methano[10]annulene Moiety and of Chalcogendiimide-Derivatives The synthesis of the tetrathiafulvalene 6 has been described: the reaction of 1 with the benzenedithoil 2 yielded the bis-dithioacetal 3 of 1,6-methano[10]annulene-dicarbaldehyde 1 . The oxidation of 3 in the presence of HBF₄ in Et₂O yielded the salt 4 , elimination of a hydride anion with triphenylmethylium tetrafluoroborate the salt 5 , and elimination of a proton in 5 with Et₃N the tetrathiafulvalene 6 with a 1,6-methano[10]annulene moiety. The spectroscopic and electrochemical properties of 6 are described, and also the syntheses and properties of charge-trasnfer complexes 7 and 8 , including the properties of electric conductivity of 7 and 8 . the syntheses of 9-13 are reported and also their spectroscopic properties.     

一种三聚季铵盐表面活性剂的合成

以N,N′-二甲基十八烷胺和1,6-二溴己烷为原料制得单头季铵盐(1);以1-溴十八烷和N,N,N′,N′-四甲基-1,6-己二氨己烷为原料制得单头季铵盐(2); 1和2反应合成了一种三聚季铵盐表面活性剂(3),其结构经1H NMR和IR确证。采用电导法和吊环法研究了3的表面性能。结果表明：25 ℃下,3的cmc为0.01 mmol·L^-1; γ_cmc为14.904 mN·m^-1; C₂₀为0.003 mmol·L^-1。     

1,6‐Dinitroperylene Bisimide Dyes: Synthesis,Characterization and Photophysical Properties

1,6‐ and 1,7‐regioisomers of dinitro‐substituted perylene bisimides ( 1a — 1b and 2a — 2b ) were synthesized under mild condition in high yields. The 1,6‐ and 1,7‐regioisomers were successfully isolated from the regioisomeric mixture using conventional methods of separation and subsequently characterized by 500 MHz ¹H NMR spectroscopy. This is the first time when 1,6‐dinitroperylene bisimides ( 1a — 1b ) are obtained in pure form. Furthermore, the photophysical and electrochemical properties of 1 and 2 were found to be almost the same. The nitro functionalities provide stability of n‐type charge carriers by lowering the LUMO to resist ambient oxidation, which may offer potential applications in air‐stable n‐type organic semiconductors.     

A Non-isocyanate Route to Poly(ester urethane) with High Molecular Weight: Synthesis and Effect of Chemical Structures of Polyester-diol

A series of non-isocyanate linear high molecular weight poly(ester urethane)s(PETUs)were prepared through an environmentallyfriendly route based on dimethyl carbonate,1,6-hexanediol and 1,6-hexanediamine.In this route,the polyurethane diol was first prepared by the reaction between bis-1,6-hexamethylencarbamate(BHC)and 1,6-hexanediol.A series of polyester soft segments of polyurethane have been synthesized from the polycondensation of adipic acid and different diols,including butanediol,hexanediol,octanediol and decanediol.The subsequent polycondensation of polyurethane diol and polyester diol led to linear PETUs.The resultant polymers were characterized by GPC,FTIR,¹H-NMR,¹³C-NMR,DSC,WAXD,TGA and tensile test.The results indicated that PETUs possess weight-average molecular weights higher than 1×10⁵ and the tensile strength as high as 10 MPa.The thermal properties,crystallization behavior,microphase separation behavior and morphology were studied by DSC and AFM,and the results indicated that the degree of phase separation was affected by two factors,the crystallization and hydrogen bonding interaction between soft segment and hard segment.     

1,6- and 1,7-regioisomers of dinitro- and diamino-substituted perylene bisimides: synthesis,photophysical and electrochemical properties

1,6- and 1,7-regioisomers of dinitro- (1,6-3 and 1,7-3) and diamino-substituted perylene bisimides (1,6-1 and 1,7-1) were synthesized. The regioisomers 1,6-3 and 1,7-3 were successfully separated by high performance liquid chromatography and characterized by 500 MHz ¹H NMR spectroscopy. Subsequently, the reduction of 1,6-3 and 1,7-3 afforded the corresponding diaminoperylene bisimides 1,6-1 and 1,7-1, respectively. This is the first time 1,6-regioisomers of dinitro- and diamino-substituted perylene bisimides are obtained in pure form. The photophysical and electrochemical properties of 1,6-3 and 1,7-3 were found to be almost the same. However, the regioisomers 1,6-1 and 1,7-1 exhibit significant differences in their optical characteristics. The absorption spectrum of 1,6-1 covers a larger part of the visible region compared to that of 1,7-1. Upon excitation, 1,6-1 also show larger dipole moment change than that of 1,7-1. Time-dependent density functional theory calculations are reported on these dyes in order to rationalize their electronic structure and absorption spectra.     

Synthesis,structure, and properties of 1,3,5-triarylpyridazines

Treatment of γ-bromodypnone with arylhydrazines gives differently structured products, i.e. γ-bromo-dypnone hydrazones, 1-aryl-3,5-diphenyl-1,4-dihydropyridazines, 1-aryl-3,5-diphenyl-1,6-dihydro-pyridazines, and aromatic 1,3,5-triarylpyridazinium salts. We have studied the pattern of formation of all of the products and their properties. Heating an alcohol solution of 1,3,5-triphenyl-1,4-dihydro-pyridazine gives N,2,4-triphenyl-1H-pyrrole-1-amine or to a 1,3,5-triphenylpyridazinium salt dependent upon the acidity of the medium. The product of addition of HBr to the 1,6-dihydropyridazine system is 5-bromo-1-(4-nitrophenyl)-3,5-diphenyl-1,4,5,6-tetrahydropyridazine.     

Benzene Oxide-Oxepin Valence Tautomerism

Benzene oxide and the potential 8π-electron system oxepin exist in valence-tautomeric equilibrium with each other, to which both components contribute to approximately the same extent. NMR spectroscopic measurements show that the equilibrium is rapidly established (activation energies of the forward and reverse reactions 9.1 and 7.2 kcal mole^?1, respectively). The present knowledge of the properties of oxepin justifies its classification as a “heterotropilidene”. Benzene oxide-oxepin represents a system having fluctuating bonds, the equilibrium of which can be displaced from one extreme to the other by means of suitable substituents. The oxide component determines the reactions of the system with most agents. With 1,6-oxido[10]annulene, which is formally a 2,7-bridged oxepin, the oxepin character is completely suppressed by the formation of a delocalized 10π-electron system extending over the C₁₀ perimeter. The existence and aromatic character of 1,6-oxido[10]-annulene give rise to the conception of a homologous series of oxygen bridged annulenes (1,6; 8,13-bisoxido[14]annulene, 1,6; 8,17; 10,15-trisoxido[18]annulene etc.), which, like the parent acenes, possess a (4n + 2)π-electron system. Molecular models demonstrate that a considerable flattening of the C_4n+2 perimeter is achievable in the case of a syn or all-syn arrangement of the oxygen bridges, and that the requirement for aromaticity is thus satisfied. This is confirmed in a striking manner by the synthesis and properties of syn-1,6; 8,13-bisoxido[14]annulene.     

Structure and properties of ethyl (2-benzimidazolyl)cyanoacetimidate

The revision of the structure of hydrolytic product from 4-cyano-1-ethoxypyrirnido[1,6-a]benzimidazole (1) and the properties of ethyl (2-benzimidazolyl)cyanoacetimidate (3a) are described.     

Synthesis and properties of tricyclo[6.4.1.0]trideca-1,3(6),7,9,11-pentaene

A new cyclobutene-fused 1,6-methano[10]annulene was synthesized by pyrolysis of the sulfone and sulfinate adducts of 3,4-bis(methylene)-1,6-methano[10]annulene and its physical and chemical properties were disclosed.     

Synthesis and conformational study of 1,2,3,4,5,6,7,8-octahydro-1,6-naphthiridines

A new class of endocyclic enamines, 1,6-disubstituted 1,2,3,4,5,6,7,8-octahydro-1,6-naphthiridines, was synthesized from 4-piperidone imines by successive subjecting the latter to lithiation with lithium diethylamide, to alkylation with 1-bromo-3-chloropropane, and to intramolecular cyclization. All stages were carried out as a unique process without isolation of the intermediate compounds. A thorough optimization of the process conditions, workup, and product storage was carried out. The conformational study of 1,6-disubstituted 1,2,3,4,5,6,7,8-octahydro-1,6-naphthiridines was performed.     

Crosslinking free-radical polymerization of dimethacrylates in the presence of branched poly(methyl methacrylate)

The kinetics of polymerization of ethylene glycol and 1,6-hexanediol dimethacrylates in the presence of branched and linear PMMAs, 1-decanethiol, and methylphenyl sulfide has been studied by isothermal calorimetry. The sol-gel analysis of 1,6-hexanediol polydimethacrylates prepared in the absence and presence of the branched PMMA is performed. The effect of the branched PMMA on the diffusion-sorption, mechanical, thermomechanical, and optical properties of polydimethacrylates is investigated. It has been established that, in the crosslinking free-radical polymerization of dimethacrylates, the branched PMMA serves both as a reactive macromonomer and a chemically inert additive—polymer filler.     

Observation of 1,6-anhydro-beta-maltose and 1,6-anhydro-beta-D-glucopyranose complexed with rubidium by NMR spectroscopy and electrospray ionization mass spectrometry.

A complex of 1,6-anhydro-beta-maltose with rubidium and that of 1,6-anhydro-beta-D-glucopyranose with rubidium were characterized using 87Rb NMR spectroscopy, diffusion-ordered NMR spectroscopy (DOSY) and electrospray ionization mass spectrometry (ESI-MS). Although subtle differences were observed in the 1H chemical shifts of 1,6-anhydro-beta-maltose in between the presence and absence of rubidium in deuterium oxide, measurements of the spin-lattice relaxation time (T1) of the 87Rb nucleus, the diffusion coefficients of 1,6-anhydro-beta-maltose using 1H DOSY and ESI-MS indicated the complex formation of 1,6-anhydro-beta-maltose with rubidium. The complex formation with rubidium was also identified for 1,6-anhydro-beta-D-glucopyranose using NMR and ESI-MS techniques.     

氨酯化合物对聚碳酸1,2-丙二酯的同时增韧和增强研究

采用非异氰酸酯路线合成了1,6-六亚甲基二氨基甲酸羟异丙酯(BPU),分子量为320.利用熔融共混方法制备了聚碳酸1,2-丙二酯(PPC)/BPU共混物.研究发现BPU与PPC间有较好的相容性,随着BPU含量的增加,共混体系的起始热分解温度(Td.5％)可分别增加24～33℃,共混物韧性也显著提高,断裂伸长率最大可增至...     

Structural and dynamic aspects of hydrogen-bonded complexes and inclusion compounds containing alpha,omega-dicyanoalkanes and urea, investigated by solid-state 13C and 2H NMR techniques

Solid-state 13C NMR and 2H NMR techniques have been used to investigate structural and dynamic properties of the 1,4-dicyanobutane/urea and 1,5-dicyanopentane/urea 1:1 hydrogen-bonded complexes and the 1,6-dicyanohexane/urea inclusion compound. The pure crystalline phase of urea has also been investigated. The 13C NMR studies have focused on 13C chemical shift anisotropy and second-order quadrupolar effects (arising from 13C-14N interaction) for the urea molecules and the cyano groups of the alpha,omega-dicyanoalkanes. Parameters describing these interactions are derived and are discussed in relation to the known structural properties of these materials. Comparison of 13C chemical shift anisotropies of the cyano carbons and rates of 13C dipolar dephasing suggest that 1,4-dicyanobutane and 1,5-dicyanopentane are effectively static, whereas 1,6-dicyanohexane has greater mobility. 2H NMR line shape analysis for the 1,4-dicyanobutane/urea-d4 and 1,5-dicyanopentane/urea-d4 complexes indicates that the only motion of the urea molecules that is effective on the 2H NMR time scale is a rapid libration about the C=O bond over an angular range of about 26 degrees . For the 1,6-dicyanohexane/urea-d4 inclusion compound, the 2H NMR line shape is consistent with a motion comprising 180 degrees jumps about the C=O bond at rates that are intermediate on the 2H NMR time scale. In addition, rapid libration about the C=O bond also occurs over an angular range of about 20 degrees . The dynamic properties of the urea molecules in these materials are compared with those of urea molecules in other crystalline environments.     

Conformation inversion of an inositol derivative by use of silyl ethers: a modified route to 3,6-di-O-substituted-L-ido-tetrahydroxyazepane derivatives

The trans-diequatorial 3,4-diol of 2,5-di-O-benzyl-D-chiro-inositol cleaved selectively with the periodate ion in the presence of the trans-diaxial 1,6-diol to give a dialdehyde (dialdose) from which 3,6-di-O-benzyl-D-manno-tetrahydroxyazepane (1) was made. The trans-diaxial 1,6-diol of 3,4-di-O-allyl-2,5-di-O-benzyl-D-chiro-inositol was not cleaved satisfactorily by periodate, but replacement of the allyl substituents with tert-butyldimethylsilyl groups caused conformational inversion of the inositol ring, and the resulting trans-diequatorial 1,6-diol cleaved efficiently to give a dialdehyde from which 3,6-di-O-benzyl-L-ido-tetrahydroxyazepane (2) can be prepared.     

Acid-catalyzed polymerization of 1,6-anhydro-β-D-glucopyranose

A number of 1,6-anhydrides were polymerized in the melt at 115°C by use of monochloroacetic acid as catalyst. In the early stages of polymerization (up to 40–50% monomer consumed), each monomer was found to disappear by a first-order rate process. The 1,6-anhydrides investigated and their relative rates of polymerization were: 1,6-anhydro-2-O-methyl-β-D -glucopyranose, 1.0; 1,6-anhydro-3,4-di-O-methyl-β-D -glucopyranose, 1.4; 1,6-anhydro-2-O-methyl-β-D -galactopyranose, 2.3; 1,6-anhydro-3-O-methyl-β-D -glucopyranose, 2.6; 1,6-anhydro-4-O-methyl-β-D -glucopyranose, 6.3; 1,6-anhydro-4-O-(β-D -glucopyranosyl) β-D -glucopyranose, 9.0; 1,6-anhydro-β-D -galactopyranose, 17; 1,6-anhydro-β-D -glucopyranose, 37; 1,6-anhydro-β-D -mannopyranose, 91; and 1,6-anhydro-2-deoxy-β-D -arabino-hexopyranose, 240. The effect of substitution on the rate of polymerization suggests this reaction is mechanistically related to the acid hydrolysis of pyranosides. The results suggest that polymerization proceeds in two stages: (1) an initial build-up of dimer followed by (2) a slower growth to higher molecular weight material.     

Synthesis of 8-methoxy-1-methyl-1H-benzo[de][1,6]naphthyridin-9-ol (Isoaaptamine) and analogues

8-Methoxy-1-methyl-1H-benzo[de][1,6]naphthyridin-9-ol, isoaaptamine, a PKC inhibitor isolated from sponge was synthesized. The synthesis parallels a synthesis of 8,9-dimethoxybenzo[de][1,6]naphthyridine, aaptamine, but uses a nitromethyl substituent as a precursor of the key 5-(2-aminoethyl)-1H-quinolin-4-one intermediate. The quinolone intermediates were prepared by thermolysis (220-240 degrees C) of anilinomethylene derivatives of Meldrum's acid. The quinolone intermediates were N-methylated prior to cyclization to the benzo[de][1,6]naphthyridine derivatives. Aaptamine and several analogues of aaptamine and isoaaptamine were prepared including 9-demethylaaptamine, 1-methyl-8-demethylaaptamine, 1-methylaaptamine, and the 8,9-methylenedioxy analogues of aaptamine and 1-methylaaptamine.     

Bis-morpholine-substituted perylene bisimides: impact of isomeric arrangement on electrochemical and spectroelectrochemical properties

The synthesis and separation of the 1,6- and 1,7- isomers of N,N'-bis(n-butyl)dimorpholino-3,4:9,10-perylenetetracarboxylic acid bisimide are reported. Investigations of the electrochemical and spectroscopic, in particular, spectroelectrochemical, properties of the two isomers reveal a sequence of electrochemically and chemically reversible redox processes for both isomers. Importantly, the 1,7-isomer of N,N'-bis(n-butyl)dimorpholino-3,4:9,10-perylenetetracarboxylic acid bisimide was observed to undergo a two-electron oxidation process, which contrasts with the behavior of both the corresponding 1,6-isomer and other related amino-substituted perylene bis-imide species.