Silver staining method for DNA in polyacrylamide gels using eriochrome black T as a silver-ion sensitizer

A sensitive silver staining method using eriochrome black T as a silver-ion sensitizer for DNA detection in polyacrylamide gels was developed. The sensitivity of this staining method was significantly improved by the new silver-ion sensitizer containing a diazo group, which has reducing power. The staining method lasted a total of approximately 15 min following a fixing step for 2 x 20 min. The detection limit of this staining method was 1-4 pg for PhiX174 DNA/HaeIII in both nondenaturing and denaturing polyacrylamide gels. This staining method was especially effective in low-base pair DNA, with a sensitivity that was approximately ten-fold higher than previously published silver staining methods.     

An optimal method of DNA silver staining in polyacrylamide gels

DNA silver staining has widely been used to detect DNA fragments in polyacrylamide gels with high sensitivity. We developed an optimal method for DNA silver staining on polyacrylamide gels. The novel procedure can be completed within 10 min instead of over 20 min with the conventional methods. The sensitivity is significantly improved by the silver-ion sensitizer (Eriochrome black T (EBT)) and the minimum of 0.11 and 1.75 ng of DNA amount can be detected in denaturing and nondenaturing polyacrylamide gel, respectively. Compared with the conventional silver staining methods, the improved optimal method can save time and display high sensitivity, color uniformity, and long storage time of the staining gels.     

Ultrasensitive fluorescence protein detection in isoelectric focusing gels using a ruthenium metal chelate stain

SYPRO Ruby IEF Protein Gel Stain is an ultrasensitive, luminescent stain optimized for the analysis of protein in isoelectric focusing gels. Proteins are stained in a ruthenium-containing metal complex overnight and then rinsed in distilled water for 2 h. Stained proteins can be excited by ultraviolet light of about 302 nm (UV-B transilluminator) or with visible light of about 470 nm. Fluorescence emission of the dye is maximal at approximately 610 nm. The sensitivity of the SYPRO Ruby IEF protein gel stain is superior to colloidal Coomassie blue stain and the highest sensitivity silver staining procedures available. The SYPRO Ruby IEF protein gel stain is suitable for staining proteins in nondenaturing or denaturing carrier ampholyte isoelectric focusing and immobilized pH gradient gel electrophoresis. The stain is compatible with N,N'-methylenebisacrylamide or piperazine diacylamide cross-linked polyacrylamide gels as well as with agarose gels and high tensile strength Duracryl gels. The stain does not contain extraneous chemicals (formaldehyde, glutaraldehyde, Tween-20) that frequently interfere with peptide identification in mass spectrometry. Successful identification of stained proteins by peptide mass profiling is demonstrated.     

Background-free,fast protein staining in sodium dodecyl sulfate polyacrylamide gel using counterion dyes,zincon and ethyl violet

A background-free, fast protein staining method in polyacrylamide gel electrophoresis using an acidic dye, zincon (ZC) and a basic dye, ethyl violet (EV) is described. It is based on the counterion dye staining technique that employs two oppositely charged dyes to form an ion-pair complex in staining solution. The selective binding of free dye molecules to proteins in acidic solution produces bluish violet-colored bands. It is a rapid and end-point staining procedure, involving only fixing and staining steps that are completed in 1-1.5 h. The detection limit of this method is 8-15 ng of protein that is comparable to the sensitivity of the colloidal Coomassie Brilliant Blue G (CBBG) stain. Due to its sensitivity and speed, this stain may be more practical than any other dye-based stains for routine laboratory purposes.     

Cell surface proteins of Candida albicans: preparation of extracts and improved detection of proteins

We have reexamined the detection of the components in a beta-mercaptoethanol and ammonium carbonate buffer extract of surface proteins of Candida albicans and the effects of postextraction manipulation of the extract on recovery of extract components. Following sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), preferential staining of some moieties was observed when bands detected by a commercial silver staining method or a Coomassie Brilliant Blue (CBB) staining method were compared. Additional protein bands that were either not detected or poorly detected by a single method alone were readily observed by a combined silver-CBB staining method. This method also detected alterations in the profile of extracted proteins from organisms grown in the presence of galactose or hemoglobin rather than glucose. Two-dimensional electrophoresis (2-DE) gel analysis by double stain showed better detection of several acidic and basic protein spots. Less than 10% of the extract as determined by a dye-binding assay was lost following either or both lyophilization and dialysis. These manipulations of the extract did not change the protein profile following SDS-PAGE as determined by the combined staining or Western blot analysis of a 70 kDa protein. These observations suggest that soluble cell wall proteins are not unusually sensitive to procedures routinely used in protein purification. In addition, these studies suggest that a modified staining method that combines both silver stain and CBB stain provides improved detection of cell wall proteins compared to either method alone.     

A statistical comparison of silver and SYPRO Ruby staining for proteomic analysis

Silver staining has been the method most commonly employed for high sensitivity staining of proteins following two-dimensional gel electrophoresis. Whilst this method offers detection in the nanogram range it does have major drawbacks including a lack of linearity, nonstoichiometric staining of proteins, a lack of compatibility with the microchemical preparation of proteins for identification by mass spectrometric techniques, and a highly subjective assessment of the staining endpoint. SYPRO Ruby is a relatively new, ruthenium complex-based stain which is reported to offer advantages over silver, particularly in overcoming the limitations cited above. We describe a series of experiments where several protein staining procedures commonly employed are compared. To enable optimization of the in situ digestion procedure, a statistical approach has been undertaken. The effects of a variety of staining, digestion, and analysis protocols on the downstream processing of a test radiolabeled protein were studied. The data confirms that as well as offering sensitivity similar to silver, SYPRO Ruby staining is reproducible, linear, and offers a higher level of compatibility with the identification of proteins by mass spectrometry.     

Functional characterization of two-dimensional gel-separated proteins using sequential staining

Proteins separated by two-dimensional (2-D) gel electrophoresis can be visualized using various protein staining methods. This is followed by downstream procedures, such as image analysis, gel spot cutting, protein digestion, and mass spectrometry (MS), to characterize protein expression profiles within cells, tissues, organisms, or body fluids. Characterizing specific post-translational modifications on proteins using MS of peptide fragments is difficult and labor-intensive. Recently, specific staining methods have been developed and merged into the 2-D gel platform so that not only general protein patterns but also patterns of phosphorylated and glycosylated proteins can be obtained. We used the new Pro-Q Diamond phosphoprotein dye technology for the fluorescent detection of phosphoproteins directly in 2-D gels of mouse leukocyte proteins, and Pro-Q Emerald 488 glycoprotein dye to detect glycoproteins. These two fluorescent stains are compatible with general protein stains, such as SYPRO Ruby stain. We devised a sequential procedure using Pro-Q Diamond (phosphoprotein), followed by Pro-Q Emerald 488 (glycoprotein), followed by SYPRO Ruby stain (general protein stain), and finally silver stain for total protein profile. This multiple staining of the proteins in a single gel provided parallel determination of protein expression and preliminary characterization of post-translational modifications of proteins in individual spots on 2-D gels. Although this method does not provide the same degree of certainty as traditional MS methods of characterizing post-translational modifications, it is much simpler, faster, and does not require sophisticated equipment and expertise in MS.     

A modified silver staining protocol for visualization of proteins compatible with matrix-assisted laser desorption/ionization and electrospray ionization-mass spectrometry

The growing availability of genomic sequence information, together with improvements in analytical methodology, have enabled high throughput, high sensitivity protein identification. Silver staining remains the most sensitive method for visualization of proteins separated by two-dimensional gel electrophoresis (2-D PAGE). Several silver staining protocols have been developed which offer improved compatibility with subsequent mass spectrometric analysis. We describe a modified silver staining method that is available as a commercial kit (Silver Stain PlusOne; Amersham Pharmacia Biotech, Amersham, UK). The 2-D patterns abtained with this modified protocol are comparable to those from other silver staining methods. Omitting the sensitizing reagent allows higher loading without saturation, which facilitates protein identification and quantitation. We show that tryptic digests of proteins visualized by the modified stain afford excellent mass spectra by both matrix-assisted laser desorption/ionization and tandem electrospray ionization. We conclude that the modified silver staining protocol is highly compatible with subsequent mass spectrometric analysis.     

2-D native-PAGE/SDS-PAGE visualization of an oligomer's subunits: application to the analysis of IgG

A 2-D native-PAGE/SDS-PAGE method for detecting the subunit components of protein oligomers at low picomole sensitivity is presented. IgG was electrophoresed in a native acidic polyacrylamide gel in amounts ranging from 51 pmol to 60 fmol. Silver-staining (native fast silver stain, ammoniacal silver stain, permanganate silver stain), Coomassie-staining (R-250, G-250), metal ion-reverse-staining (zinc, copper), and fluorescent chromophore-staining (SYPRO Ruby) methods were used to visualize the IgG oligomers. The protein zones were then excised, separated by SDS-PAGE, and subunits visualized with a permanganate silver stain. The Coomassie R-250/permanganate silver-staining combination detected IgG subunits using 2 pmol of sample. Coomassie G-250 and native fast silver staining in the first-dimensional gel produced detectable subunits in the second-dimensional separation at 3 and 13 pmol, respectively. Staining with silver (ammoniacal, permanganate), copper, zinc, or SYPRO Ruby in the first-dimensional gel did not produce discernible subunits in the second-dimensional gels due to protein streaking or protein immobilization in the native gel. When using a 2-D native-PAGE/SDS-PAGE system, Coomassie staining of the first-dimensional native gel combined with permanganate silver staining of the second-dimensional denaturing gel provides the most sensitive method (2-3 pmol) for visualizing constituent subunits from their oligomeric assemblies.     

Postelectrophoretic staining of proteins separated by two-dimensional gel electrophoresis using SYPRO dyes

While the classical silver stain has been the method of choice for high sensitivity protein visualization on two-dimensional gel electrophoresis (2-D PAGE), post-electrophoretic fluorescent staining with the SYPRO group of dyes has emerged to challenge silver staining for proteome analysis. The latter offers improved sensitivity, higher dynamic range and easy handling. However, most of the published data were derived from analysis of 1-D gel separations. In this work, we have focused on three commercially available fluorescent dyes, SYPRO Ruby, SYPRO Orange and SYPRO Red (Molecular Probes, Eugene, OR, USA) and studied their sensitivity and dynamic range on 2-D PAGE. The use of a multiwavelength fluorescent scanner to image 2-D protein profiles visualized with fluorescent staining is discussed, and a detailed comparison with analysis by silver staining is also provided. These results demonstrate the advantages of using SYPRO dyes, which are in agreement with the literature based on 1-D gel electrophoresis, and give a more realistic understanding of the performance of these fluorescent dyes with 2-D PAGE.     

Fluorescence detection of proteins in sodium dodecyl sulfate-polyacrylamide gels using environmentally benign, nonfixative, saline solution

SYPRO Tangerine stain is an environmentally benign alternative to conventional protein stains that does not require solvents such as methanol or acetic acid for effective protein visualization. Instead, proteins can be stained in a wide range of buffers, including phosphate-buffered saline or simply 150 mM NaCl using an easy, one-step procedure that does not require destaining. Stained proteins can be excited by ultraviolet light of about 300 nm or with visible light of about 490 nm. The fluorescence emission maximum of the dye is approximately 640 nm. Noncovalent binding of SYPRO Tangerine dye is mediated by sodium dodecyl sulfate (SDS) and to a lesser extent by hydrophobic amino acid residues in proteins. This is in stark contrast to acidic silver nitrate staining, which interacts predominantly with lysine residues or Coomassie Blue R, which in turn interacts primarily with arginine and lysine residues. The sensitivity of SYPRO Tangerine stain is similar to that of the SYPRO Red and SYPRO Orange stains - about 4-10 ng per protein band. This detection sensitivity is comparable to colloidal Coomassie blue staining and rapid silver staining procedures. Since proteins stained with SYPRO Tangerine dye are not fixed, they can easily be eluted from gels or utilized in zymographic assays, provided that SDS does not inactivate the protein of interest. This is demonstrated with in-gel detection of rabbit liver esterase activity using alpha-naphthyl acetate and Fast Blue BB dye as well as Escherichia coli beta-glucuronidase activity using ELF-97 beta-D-glucuronide. The dye is also suitable for staining proteins in gels prior to their transfer to membranes by electroblotting. Gentle staining conditions are expected to improve protein recovery after electroelution and to reduce the potential for artifactual protein modifications such as the alkylation of lysine and esterification of glutamate residues, which complicate interpretation of peptide fragment profiles generated by mass spectrometry.     

Fast visible dye staining of proteins in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gels compatible with matrix assisted laser desorption/ionization-mass spectrometry

A fast and matrix assisted laser desorption/ionization-mass spectrometry (MALDI-MS) compatible protein staining method in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis (1- and 2-D SDS-PAGE) is described. It is based on the counterion dye staining method that employs oppositely charged two dyes, zincon (ZC) and ethyl violet (EV) to form an ion-pair complex. The protocol, including fixing, staining and quick washing steps, can be completed in 1-1.5 h depending upon gel thickness. It has a sensitivity of 4-8 ng, comparable to that of colloidal Coomassie Brilliant Blue G (CBBG) staining with phosphoric acid in the staining solution. The counterion dye stain does not induce protein modifications that complicate interpretation of peptide mapping data from MS. Considering the speed, sensitivity and compatibility with MS, the counterion dye stain may be more practical than any other dye-based protein stains for routine proteomic researches.     

Improved dynamic range of protein quantification in silver‐stained gels by modelling gel images over time

Silver staining is a commonly used protein stain to visualise proteins separated by 2‐DE. Despite this, the technique suffers from a limited dynamic range, making the simultaneous quantification of high‐ and low‐abundant proteins difficult. In this paper we take advantage of the fact that silver staining is not an end‐point stain by photographing the gels during development. This procedure provides information about the change in measured absorbance for each pixel in the protein spots on the gel. The maximum rate of change was found to be correlated with the amount of applied protein, providing a new way of estimating protein amount in 2‐DE gels. We observed an improvement in the dynamic range of silver staining by up to two orders of magnitude.     

Background-free, high sensitivity staining of proteins in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gels using a luminescent ruthenium complex

SYPRO Ruby dye is a permanent stain comprised of ruthenium as part of an organic complex that interacts noncovalently with proteins. SYPRO Ruby Protein Gel Stain provides a sensitive, gentle, fluorescence-based method for detecting proteins in one-dimensional and two-dimensional sodium dodecyl sulfate-polyacrylamide gels. Proteins are fixed, stained from 3h to overnight and then rinsed in deionized water or dilute methanol/acetic acid solution for 30 min. The stain can be visualized using a wide range of excitation sources commonly used in image analysis systems including a 302 nm UV-B transilluminator, 473 nm second harmonic generation (SHG) laser, 488 nm argon-ion laser, 532 nm yttrium-aluminum-garnet (YAG) laser, xenon arc lamp, blue fluorescent light bulb or blue light-emitting diode (LED). The sensitivity of SYPRO Ruby Protein Gel Stain is superior to colloidal Coomassie Brilliant Blue (CBB) stain or monobromobimane labeling and comparable with the highest sensitivity silver or zinc-imidazole staining procedures available. The linear dynamic range of SYPRO Ruby Protein Gel stain extends over three orders of magnitude, which is vastly superior to silver, zinc-imidazole, monobromobimane and CBB stain. The fluorescent stain does not contain superfluous chemicals (formaldehyde, glutaraldehyde, Tween-20) that frequently interfere with peptide identification in mass spectrometry. While peptide mass profiles are severely altered in protein samples prelabeled with monobromobimane, successful identification of proteins by peptide mass profiling using matrix-assisted laser desorption/ionization mass spectrometry was easily performed after protein detection with SYPRO Ruby Protein Gel stain.     

Fluorogenic Ag+–Tetrazolate Aggregation Enables Efficient Fluorescent Biological Silver Staining

Silver staining, which exploits the special bioaffinity and the chromogenic reduction of silver ions, is an indispensable visualization method in biology. It is a most popular method for in‐gel protein detection. However, it is limited by run‐to‐run variability, background staining, inability for protein quantification, and limited compatibility with mass spectroscopic (MS) analysis; limitations that are largely attributed to the tricky chromogenic visualization. Herein, we reported a novel water‐soluble fluorogenic Ag⁺ probe, the sensing mechanism of which is based on an aggregation‐induced emission (AIE) process driven by tetrazolate‐Ag⁺ interactions. The fluorogenic sensing can substitute the chromogenic reaction, leading to a new fluorescence silver staining method. This new staining method offers sensitive detection of total proteins in polyacrylamide gels with a broad linear dynamic range and robust operations that rival the silver nitrate stain and the best fluorescent stains.     

Blue silver: a very sensitive colloidal Coomassie G-250 staining for proteome analysis

A modified Neuhoff's colloidal Coomassie Blue G-250 stain is reported, dubbed "blue silver" on account of its considerably higher sensitivity, approaching the one of conventional silver staining. The main modifications, as compared to Neuhoff's protocol, were: a 20% increment in dye concentration (from 0.1% up to 0.12%) and a much higher level of phosphoric acid in the recipe (from 2% up to 10%). The "blue silver" exhibits a much faster dye uptake (80% during the first hour of coloration, vs. none with a commercial preparation from Sigma). Even at equilibrium (24 h staining), the "blue silver" exhibits a much higher sensitivity than all other recipes, approaching (but lower than) the one of the classical silver stain. Measurements of stain sensitivity after sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) of bovine serum albumin (BSA) gave a detection limit (signal-to-noise ratio > 3) of 1 ng in a single zone. The somewhat lower sensitivity of "blue silver" as compared to classical silvering protocols in the presence of aldehydes is amply compensated for by its full compatibility with mass spectrometry of eluted polypeptide chains, after a two-dimensional map analysis, thus confirming that no dye is covalently bound (or permanently modifies) to any residue in the proteinaceous material. It is believed that the higher level of phosphoric acid in the recipe, thus its lower final pH, helps in protonating the last dissociated residues of Asp and Glu in the polypeptide coils, thus greatly favoring ionic anchoring of dye molecules to the protein moiety. Such a binding, though, must be followed by considerable hydrophobic association with the aromatic and hydrophobic residues along the polypeptide backbone.     

Novel procedure for the identification of proteins by mass fingerprinting combining two-dimensional electrophoresis with fluorescent SYPRO red staining

The fluorescent sensitive SYPRO Red dye was successfully employed to stain proteins in two-dimensional gels for protein identification by peptide mass fingerprinting. Proteins which are not chemically modified during the SYPRO Red staining process are well digested enzymatically in the gel and hence the resulting peptides can be efficiently eluted and analysed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). A SYPRO Red two-dimensional gel of a complex protein extract from Candida albicans was analysed by MALDI-TOF MS. The validity of SYPRO Red staining was demonstrated by identifying, via peptide mass fingerprinting, 10 different C. albicans proteins from a total of 31 selected protein spots. The peptide mass signal intensity, the number of matched peptides and the percentage of coverage of protein sequences from SYPRO Red-stained proteins were similar to or greater than those obtained in parallel with the modified silver protein gel staining. This work demonstrates that fluorescent SYPRO Red staining is compatible with the identification of proteins separated on polyacrylamide gel and that it can be used as an alternative to silver staining. As far as we know, this is the first report in which C. albicans proteins separated using 2-D gels have been identified by peptide mass fingerprinting. The improved technique described here should be very useful for carrying out proteomic studies.     

Recovery of intact proteins from silver stained gels

Silver stained proteins of a wide molecular weight (MW) range (20-116 kDa) were successfully recovered by both electroblot and electroelution. The recovery was demonstrated for nanogram loads of proteins separated by SDS-PAGE and visualized by silver staining methods compatible and incompatible with mass spectrometry (MS). It was shown that the alcohol/acid and glutaraldehyde fixation steps present in a number of staining procedures did not prevent recovery of intact proteins from gels. It was found that the recovery of intact proteins from silver stained gels was substantially increased upon pre-equilibration in a buffer containing the reducing agent, dithiothreitol (DTT). The effect of destaining on the recovery of silver stained proteins was also investigated. Comparable recovery of intact proteins within a wide MW range from silver stained gels with and without destaining step was demonstrated. Recovery of model proteins from gels visualized using silver staining method compatible with MS showed 52 to 76% yield of that from the unstained gel, depending upon method of the transfer. Comparison of the recovery of intact proteins from gels visualized using other staining procedures was also made. The above findings have implications as to the supposed irreversible nature of protein "fixation" inside polyacrylamide matrix, and confirm lack of binding of proteins in the gel to metal silver deposited on its surface. This method has the potential to be suitable for direct characterization of proteins by matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) without additional purification steps.     

Promoted negative staining of proteins in SDS-PAGE using Eosin B compounded with magnesium chloride

In this study, we describe an effective visualizing technique for proteins in SDS-PAGE based on the organic dye, Eosin B, the sensitivity of which can be further strengthened by the addition of magnesium to the staining solution after electrophoresis. The newly developed protocol is low in cost and easily performed compared with the common methods for protein analysis in 1-D and 2-D gels. It provides a much better sensitivity (0.2 ng of single protein band) than that of imidazole-zinc negative stain for fixing and staining within 1 h, and an excellent performance in terms of compatibility with MALDI-TOF MS. The results show that similar identification scores and numbers of matched peptides were obtained by both methods. Furthermore, the effects of different metal salts on the quality of protein visualization by Eosin B were also investigated. Because of its sensitivity, stability, and safety, this stain may be a more practical method for protein determination in the routine laboratory.     

Stain efficiency and MALDI-TOF MS compatibility of seven visible staining procedures

Visible stain is still the most popular protein staining method used in proteomic approaches. However, most published data have been derived from comparisons between visible dyes and fluorescent dyes. In this work, we have focused on seven widely used visible staining procedures—Neuhoff CCB, blue silver, and five silver stains (LKB SN, He SN, Yan SN, Vorum SN, and Blum SN)—and studied their stain efficiencies and MALDI-TOF MS compatibilities on 1-D and 2-D PAGE. It was concluded that blue silver is slightly better in terms of stain efficiency than Neuhoff CCB, but it presented worse MS compatibility. Neuhoff CCB presented better MS compatibility and superior linearity but worse sensitivity than silver stains. Among the five silvering procedures, He SN showed the best MS compatibility and a reasonable staining efficiency; Yan SN lowered the chances of obtaining the protein identity by PMF but gave the best stain efficiency; Vorum SN gave a very clear background and a great contrast, while Blum SN was the worst in this respect. The implications of these results for the selection of a convenient stain are discussed according to specific objectives as well as practical aspects.