Synthesis and characterization of star-comb polybutadiene and poly(ethylene-co-butene)

<正>A novel star-comb polybutadiene(SC-PB) was synthesized with n-butyllithium(n-BuLi) as initiator,epoxidized star liquid polybutadiene(ESPB) as coupling agent,cyclohexane as solvent by living anionic polymerization and grafting-onto technology. The SC-PB was subsequently hydrogenated by homogeneous catalysis(catalytic hydrogenation using nickel naphthenate/ triisobutyl aluminum),to transform the SC-PB into the corresponding star-comb poly(ethylene-co-butene)(SC-PEB).The SC-PB was characterized by SEC-TALLS,~1H NMR,DSC and WAXD techniques.The hydrogenation degree and crystallinity degree of SC-PEB were also determined.     

酚醛树脂分子量及分布场解吸质谱表征方法研究

酚醛树脂分子量及分布的表征方法有很多,如蒸气压渗透法(VPO)、气相色谱、高压液相色谱和凝胶渗透色谱等,但由于酚醛树脂存在众多异构体,这些方法均有一定限制性.场解吸质谱(FD-MS)方法的特点是只给出样品固有组分的分子峰,不产生碎片离子峰,用于酚醛树脂的表征,可以直接得出树脂所有固有组分的分子离子峰值,及树脂不同缩合度组分的相对含量,非常适用于组份繁多的酚醛树脂的的分子量及分布表征研究.以苯酚、甲酚及甲醛等原料分别制备了Resole型苯酚-甲醛树脂、Novolac型苯酚-甲醛树脂、Novolac型甲酚树脂及混酚-甲醛树脂,利用FD-MS对制备的几种不同类型酚醛树脂的分子量及分布进行了研究.结果表明,通过FD-MS谱图分析还可以得到树脂缩聚程度、原料种类、树脂特性等信息,对于鉴别及剖析各种类型酚醛树脂方便有效.     

机理转移法合成星形梳状聚丁二烯-g-聚甲基丙烯酸甲酯共聚物的研究

结合活性负离子聚合与原子转移自由基聚合(ATRP),采用机理转移法制备了一系列窄分布且分子量可控的星形梳状聚丁二烯-g-聚甲基丙烯酸甲酯接枝共聚物(SC-(PB-g-PMMA)).首先通过阴离子聚合,制备星形聚丁二烯,后经甲酸-过氧化氢原位环氧化对链中部分双键进行环氧化,再与原位生成2-溴异丁酸发生酯化反应,得到具有链中活性溴的星形大分子引发剂(SPB-Brn).然后,利用该大分子引发剂,采用CuCl/CuCl2/PMDETA催化体系,通过ATRP聚合单体MMA,合成出星形梳状SC-(PB-g-PMMA)聚合物.通过GPC,1H-NMR和FTIR等分析手段对合成的星形大分子引发剂及星形梳状聚合物进结构表征,证实得到目标产物,并同时研究了聚合物的热力学性质与溶液性质.     

Mass spectrometric techniques for characterizing low-molecular-weight resins used as paint varnishes

The molecular structure of three low-molecular-weight resins used as paint varnishes has been characterized by use of an approach based on three different mass spectrometric techniques. We investigated the ketone resin MS2A, the aldehyde resin Laropal A81, and the hydrocarbon resin Regalrez 1094, now commonly used in restoration. To date, the molecular structures of these resins have not been completely elucidated. To improve current knowledge of the chemical composition of these materials, information obtained by gas chromatography–mass spectrometry (GC/MS), pyrolysis–gas chromatography–mass spectrometry (Py/GC/MS), and electrospray ionization mass spectrometry (ESI–Q–ToF) was combined. Analysis, in solution, of the whole polymeric fraction of the resins by flow-injection ESI–Q–ToF, and of the non-polymeric fraction by GC–MS, enabled us to identify previously unreported features of the polymer structures. In addition, the Py–GC/MS profiles that we obtained will help to enhance the databases currently available in the literature. The proposed approach can be extended to other low-molecular-weight resins used as varnishes in conservation.     

共聚结构和分子量对热塑性聚酰亚胺树脂熔融与耐热性能的影响

基于具有刚性主链结构的4,4'-(六氟亚异丙基)双邻苯二甲酸酐/对苯二胺(6FDA/p-PDA)树脂体系, 通过共聚引入间苯二胺(m-PDA)、 4,4'-二氨基-2,2'-双三氟甲基联苯(TFDB)和9,9'-双(4-氨基苯基)芴(BAFL)等主链刚性且兼具大自由体积特性的芳香二胺, 以非反应性封端剂邻苯二甲酸酐(PA)对分子量进行调控, 设计制备了系列分子量可控的热塑性聚酰亚胺(TPI)树脂. 系统研究了共聚结构和分子量对TPI树脂熔融性能和耐热性能的影响, 构建了聚合物的聚集态结构与树脂熔融性能的对应关系, 并对树脂的室温和高温力学性能进行了评价. 研究结果表明, 大自由体积的芳香二胺共聚结构的引入可有效降低分子链堆砌密度, 增大聚合物的自由体积, 从而赋予树脂良好的熔融性能. 降低设计分子量可进一步改善树脂的熔融加工性. 这类具有刚性主链结构的TPI树脂兼具优异的耐热性能和力学性能, 树脂的玻璃化转变温度在308~338 ℃之间, 以TFDB和BAFL共聚制备的TPI-C-25K和TPI-D-25K树脂表现出高强高韧的特性, 拉伸和弯曲强度分别超过120 MPa和190 MPa, 断裂伸长率大于8.2%, 并且在250 ℃高温下表现出良好的耐热稳定性.     

Removal of iodide from aqueous solutions by polyethylenimine-epichlorohydrin resins

The iodide removal from aqueous solutions (initial I^?-concentration: 300–5,000 mg/L) by a low and a high molecular weight polyethylenimine-epichlorohydrin resin was investigated both in absence and presence of background electrolytes (NaCl and Na₂SO₄, ionic strength due to background electrolyte 0.1 M) using a batch technique, ¹³¹I as radioactive tracer and high-resolution γ-ray spectrometry. The experiments in absence of background electrolyte were performed using solutions of initial pH 3 and 7, whereas those in presence using solutions of initial pH 3. The results, which demonstrated the high iodide-removal efficiency of both resins, were modeled using the Langmuir and Freundlich isotherm equations. The experimental data were better reproduced using the Langmuir equation. Using this equation maximum sorption capacity values (Q _max) of 638.8 and 603.3 mg/g were obtained for the high molecular weight resin from solutions of initial pH 3 and 7 respectively, whereas the corresponding values for the low molecular weight one were slightly lower (552.4 and 507.5 mg/g respectively). The iodide uptake by the resins strongly depended on the presence of competing anions and especially of sulfates. The examination of sections of the I-loaded resins grains by scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) revealed that iodine was evenly distributed throughout the bulk of the resins and not only bound to their surface.     

Impact resistant resins based on olefinic terpolymers containing a system of conjugated double bonds—V. Influence of reaction solvent on the physico-chemical properties of ungrafted SAN and some technological properties of ATS resins

Radical induced grafting of styrene (S) and acrylonitrile (AN) on to an unsaturated ethylene-propylene based terpolymer (EPTM) in mixed solvents has been investigated. Molecular weight, molecular weight distribution, conversion of ungrafted poly(styrene-co-acrylonitrile) (SAN) with 25 w% of AN and its degree of graft on to EPTM have been reported as functions of composition of the toluene/η-heptane mixture used as solvent. Mechanical properties of ATS resins are strongly dependent on the degree of graft of SAN resins and the molecular parameters of the ungrafted SAN; both are influenced by toluene content in the solvent mixture.     

Study of viscosity behavior and retanning properties of sulfonated glutaric dihydrazide formaldehyde condensate under different reactant ratios

Sulfonated glutaric dihydrazide formaldehyde condensates with less than 0.05% free formaldehyde were prepared through controlled reaction of glutaric dihydrazide, sodium metabisulfite, and formaldehyde in three processing steps. Mole ratio of sodium metabisulfite/glutaric dihydrazide (S/GDH) was varied from 0.1 to 0.5 and that of formaldehyde/glutaric dihydrazide (F/GDH) from 1 to 3. The effects on viscosity and fluidity of resins were observed with varying degrees of sulfonation and changeable mole ratio of formaldehyde/glutaric dihydrazide. Viscosity of resins showed increasing trend with increasing mole ratio of formaldehyde/glutaric dihydrazide and decreasing trend with increasing mole ratio of sodium metabisulfite/glutaric dihydrazide. Increase in viscosity of resins was due to increase in molecular weight of polymer chains. After gaining a critical molecular weight during condensation, resins turned into gel form. The resins were comparatively applied on chrome tanned cow hide against commercial sulfonated urea formaldehyde powder resin (Resin UFT).     

Synthesis and molecular structure analysis of nano‐sized methacryl‐grafted polysiloxane resin for fabrication of nano hybrid materials

The molecular structures of methacryl‐grafted polysiloxane resins from 3‐(trimethoxysilyl)propyl methacrylate (MPTS) and diphenylsilanediol (DPSD) were determined by theoretical computation and experimental measurement. The molecular structures obtained from theoretical computation coincided well with those from experimental measurement, and we found that the structural changes in the resins could be controlled by precursor compositions. While molecular weights and polysiloxane chain lengths of the resins increase with DPSD contents, their molecular sizes do not vary significantly. In the present study, molecular sizes and shapes of the resins with various compositions are hypothesized theoretically and proven experimentally. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 827–836, 2005     

Determination of molecular weight distributions of novolac resins by gel permeation chromatography

The number- and weight-average molecular weights of several statistical and high ortho novolac resins were determined using gel permeation chromatography (GPC). The standards used were pure compounds having between 2 and 12 phenol units bridged via methylene linkages. Three series of compounds were studied: (i) those with methylene linkages substituted in only the ortho positions relative to the phenolic hydroxyl group; (ii) those in which all para positions, together with sufficient ortho positions, were used to synthesize the compounds; and (iii) those in which the methylene linkages were substituted at a mixture of ortho and para positions. Such compounds, having known molecular architecture and units similar to the segments of industrial novolac resins, provide for a more exact measurement of the molecular weight than do the commonly used poly(styrene) standards. Using these new standards the number average molecular weights of the resins determined by GPC were in good agreement with the average molecular weight obtained by ¹H-NMR spectra of the resins, particularly for low molecular weight resins. GPC analysis of higher molecular weight resins tends to underestimate the molecular weights because of complications introduced by hydrogen bonding. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1399–1407, 1997     

Preparation of Low-dielectric Permittivity Polyimide Resins with High Surface Activity from Chemically Bonded Hyperbranched Polysiloxane

Thermosetting resin matrix is the key component of advanced wave-transparent composites,where low dielectric constant,excellent processability,high thermal stability,as well as good bonding ability are required for resins.Herein,we prepared a series of phenylethynyl terminated polyimide(PI)resins by grafting amine-functionalized hyperbranched polysiloxane(HBPSi)to PI chains during the in situ polymerization.The effects of HBPSi on the processability of oligomers,molecular packing,thermal stability,dielectric property and bonding ability to reinforce Kevlar fibers of the cured PI/HBPSi composite resins have been examined in detail.The dielectric constants of the cured composite resins were greatly reduced from 3.29 to 2.19 without compromising its processability and thermal stability.Meanwhile,the 10 wt％HBPSi-containing PI resin demonstrated better bonding ability to reinforce fibers with the interfacial shear strength(IFSS)of 37.64 MPa,compared with that of neat PI-6 matrix(27.34 MPa),and better adhesion to metal with the lap shear strength of 10.48 MPa,50％higher than that of neat resin PI-6(6.98 MPa).These resultant PI/HBPSi composite resins exhibit excellent comprehensive properties,indicating their great potential as low-dielectric constant resin matrix in radar radome.     

Preparation and characterization of macroporous polystyrene resins containing ethynyl groups and transition metal acetylide complexes

Ethynylated polystyrene resins were prepared as functionalized polymer supports by the iodination reaction of macroporous polystyrene resins and reacted with transition metal diethynyl complex (Mt = Ni) and metal halides (Mt = Rh, Pd, and Pt) in a basic solvent using cuprous iodide as a catalyst to obtain macroporous polystyrene resins containing organotransition metals. The distribution of the metal acetylide complexes in the modified macroporous resins was determined by an electron probe microanalyzer. A gradient in the transition metal distribution was observed in any case of the modified resins. The stability of the organotransition metal complexes in the polymer matrix could be compared with a low molecular weight analogous complex quantitatively.     

羧基丙烯酸树脂的合成研究及其粉末涂料的制备

用乳液聚合法合成了含羧基的丙烯酸树脂 ,考察了单体、酸值和引发剂用量对该树脂及其粉末涂料涂膜性能的影响。适宜树脂是 ;酸值 45～ 55mgKOH/g ,数均分子量 2 0 0 0～ 50 0 0 ,软化点90～ 1 1 0℃ ,玻璃化温度 50～ 60℃。     

Reaction of epoxy resin and hyperbranched polyacids

The condensation reaction between two different epoxy resins and a hyperbranched polyester (MAHP) [poly(allyloxy maleic acid‐co‐maleic anhydride)] was studied. We compared two kinds of diglycidyl ether bisphenol A type of epoxy resins with different molecular weights, that is, epoxy resin GY240 (M = 365 g/mol) and GT6064 (M = 1540 g/mol) in this reaction. The results showed a marked difference in their reaction pattern in terms of ability to form crosslinked polymer networks with MAHP. For the former low‐molecular‐weight epoxy resin, no crosslinking could be observed in good solvents such as THF or dioxane within the set of reaction conditions used in this study. Instead, polymers with epoxide functional degrees between 0.34 and 0.5 were formed. By contrast, the latter high‐molecular‐weight epoxy resin, GT6064, rapidly produced highly crosslinked materials with MAHP under the same reaction conditions. The spherical‐shape model of hyperbranched polymer was applied to explain this difference in reaction behavior. Hence, we have postulated that low‐molecular‐weight epoxy resins such as GY240 are unable to crosslink the comparatively much bigger spherically shaped MAHP molecules. However, using high‐molecular‐weight epoxy resins greatly enhances the probability of crosslinking in this system. Computer simulations verified the spherical shape and condensed bond density of MAHP in good solvents, and submicron particle analysis showed that the average MAHP particle size was 9 nm in THF. Furthermore, the epoxy‐functionalized polyesters were characterized by ¹H NMR and FTIR, and the molecular weights and molecular‐weight distributions were determined by size‐exclusion chromatography. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4457–4465, 2000     

Structural and Chemical Characteristics of Model Molecular Fragments of Petroleum Resins

Supramolecular, molecular and electronic structures of petroleum resins are studied. The experimental part includes isolation of resins by the eluent method and measuring electron and IR spectra. The structural parameters are calculated by molecular mechanics and DFT/B3LYP methods. The calculated data are in good agreement with the experiment. The nonplanar structure of petroleum resins is confirmed by the results of our structural study.     

Effect of Hyperbranched Polyester on Modification of Epoxy Resins Cured with Anhydride

Epoxy resins are widely used in coatings, adhesives and polymer composites, but the applications of cured epoxy resins are often restricted by their poor toughness. HBP can be used as toughener to improve the toughness of epoxy resins due to its high-dens…     

Alkyd resins derived from glycolized waste poly(ethylene terephthalate)

In this investigation the production of secondary value-added products, such as alkyd resins, derived from the glycolysis of poly(ethylene terephthalate) (PET) is examined as an effective way for its recycling. PET was taken from common soft-drink bottles and diethylene glycol (DEG) was used for the depolymerization at several initial molar ratios. The oligomers obtained were analyzed according to their average molecular weights. Furthermore, the glycolyzed PET products (oligomers) were reacted with maleic anhydride, phthalic anhydride and propylene glycol to form unsaturated polyester resins. These were subsequently mixed with styrene and cured using the benzoyl peroxide/amine initiator system to carry out the reaction in ambient temperature. The curing characteristics of the resins produced were investigated with respect to the initial molar ratio of DEG/PET as well as the initial initiator concentration. Finally, the mechanical properties (tensile strength and elongation at the break point) of the resins were compared with the conventional general purpose resin and were found to be comparable.     

Chain extension of ketonic resins

Chain extensions of cyclohexanone-formaldehyde (CF) and acetophenone-formaldehyde (AF) resins via their hydroxyl groups were studied. The chain extension was regulated by the ratio of hydroxyl groups/reactive reagents. Dimethyl dichlorosilane, phosphorus oxychloride, toluene-2, 4-diisocyanate, phthalic anhydride, tetrahydro phthalic anhydride, trimellitic anhydride, 4, 4'-oxydiphthalic anhydride were used as chain extender reagent. It has been shown that solubilites, melting point and molecular weight of extended resins depended upon the characteristics of chain extender reagents.     

Adhesives and coatings based on phenolic/epoxy resins

Low molecular weight epoxy resin based on bis (4‐hydroxy phenyl) 1,1 cyclohexane was prepared and modified with various types of the prepared phenolic resins. Phenol–, cresol–, resorcinol–and salicylic acid–formaldehyde resins were used. The optimum conditions of formulation and curing process were studied to obtain modified wood adhesives characterized by high tensile shear strength values. This study indicated that the more suitable conditions are 1:2 weight ratio of phenol–or cresol–formaldehyde to epoxy resin in the presence of phthalic anhydride (20 wt%) of the resin content as a curing agent at 150°C for 80 min. Resorcinol–or salicylic acid–formaldehyde/epoxy resins formulated at 1:2 weight ratio were cured in the presence of paraformaldehyde (20 wt%) at 150°C for 60 min. The effect of the structure of phenolic resins on the tensile shear strength values of formulated resin samples, when mixed with the epoxy resins and cured under the previously mentioned optimum conditions for different times, was investigated. Metallic and glass coatings from the previous resins were also prepared and evaluated as varnishes or paints. Copyright © 1999 John Wiley & Sons, Ltd.     

高分子量级分含量对熔体挤出拉伸法制备聚丙烯微孔膜的影响

通过熔体挤出拉伸法以两种聚丙烯为原料制备微孔膜.通过考察原料分子量数据发现高分子量聚丙烯(PPH)在高分子量级分(重均分子量>106)含量上大于低分子量聚丙烯(F401).PPH的弛豫时间在相同条件下也远大于F401.红外二向光法结果表明,PPH在相同熔体牵伸比下片晶取向度较F401高.相同加工条件下PPH微孔膜片较F401成孔分布更均匀,孔径尺寸也更均匀.2种微孔膜孔隙率都随熔体牵伸比的增加而提高,微孔分布随着熔体牵伸比的提高和片晶取向度的增加而趋于均匀,孔尺寸也随之区域均匀.研究表明,聚合物树脂中高分子量级分含量是影响预制膜中片晶取向度、冷热拉伸成孔分布和尺寸均匀度的重要影响因素.