可见光敏引发聚合甲基丙烯酸甲酯的动力学研究

本论文用膨胀计法进行了甲基丙烯酸甲酯在氯仿溶液中可见光光敏引发聚合动力学的研究。此光敏引发体系由光敏剂1,3,3-三甲基-2-[5-(1,3,3-三甲基-2-吲哚叉)-1,3-戊二烯]吲哚碘盐(简称NK-529),引发剂邻氯代六芳基双咪唑(简称o-Cl-HABI),氢给体3-巯基-4-甲基-4氢-1,2,4-三氮唑(简称MTA)组成。研究结果表明,此光敏聚合体系的光聚合速率与各组分的动力学方程如下:R_p=K(NK-529)^0.51(HABI)^0.41(MTA)^0.36(MMA)^1.0.     

新型的香豆素染料/碘( )盐光敏引发系统的研究

在实际应用中,大部分光敏引发系统只对紫外光敏感.近年来,随着Ar+(488nm)、YAG(532nm)以及He-Ne(633nm)激光技术的不断发展,高效的长波长光敏引发体系成为研究的重点.其中之一的方法是使引发剂直接感可见光,然而取得的结果并不显著.所以染料敏化又一次成为焦点.其中最重要的技术是使光敏引发系统的吸收波长移向长波长,并且具有高的灵敏度.     

染料增感过氧化酯体系引发的可见激光感光性高分子

由过氧化物3,3′,4,4′-四叔丁基过氧碳酰二苯甲酮和香豆素酮染料所组成的光引发体系对可见光敏感,致使感光树脂可以用氩离子激光曝光。感光树脂的敏度有赖于基体树脂,当用聚N-乙烯基-2-吡咯烷酮为基体树脂时,对波长488nm的氩离子激光可获得0-01mJ/cm²的高敏度。染料对过氧化物的敏化是由于电子从染料激发态转移到过氧化物而引起的。     

长波长光敏引发聚合体系

香豆素酮染料;双咪唑;染料增感;长波长光敏引发聚合体系     

具有分子内电子转移特征的氨基蒽醌类有机化合物的合成 及光物理性质研究

合成了一系列1,5-二烷基氨基蒽醌类和含有可光致聚合CH2＝CHCO2基团且具有分子内电子转移特征的烷基氨基蒽醌类有机光功能化合物. 通过1H NMR, IR和MS对合成的化合物进行了结构鉴定. 通过光引发测试等实验证明, 含有可光致聚合CH2＝CHCO2的基团、具有分子内电子转移特征的烷基氨基蒽醌/邻氯六芳基双咪唑(HABI)体系, 在500 nm左右的可见光照射下, 且具有较快的光漂白速度和较高的光引发效率, 可以与Ar＋激光器匹配作为高效可见光敏聚合的光引发-吸收剂使用.     

KCD/MDEA/TA三元引发剂引发丙烯酸酯/液晶复合体系光聚合动力学

采用配有441.6 nm滤光片的光差示扫描量热仪研究了3,3'-羰基双(7-二乙胺香豆素)(KCD)/N-甲基二乙醇胺(MDEA)/2-(4-甲氧苯基)-4,6-双(三氯甲基)-1,3,5-三嗪(TA)三元引发剂引发丙烯酸酯/液晶复合体系光聚合动力学行为. 结果表明, 在KCD/MDEA复合引发剂中添加TA, 显著提高了丙烯酸酯/液晶复合体系的最大光聚合速率[R_p(max)]和单体转化率, 当TA质量分数为0.5%时, 体系的R_p(max)和单体转化率分别提高了100%和69%. 同时, 随着光照强度的增加, 该体系的R_p(max)和单体转化率呈增大的趋势, 当光强从1.5 mW/cm⁺²提高到35.2 mW/cm⁺²时, 其R_p(max)和最终单体转化率分别提高了2.5和2.8倍.     

可见光/Fenton光催化降解有机染料

采用Fenton试剂(Fe³⁺/H₂O₂)在可见光条件下(λ＞450nm)光催化降解目标染料化合物罗丹明B(RhodamineB,RhB).在pH＜3.0体系中用可见光照射,能使RhB染料在光敏化作用下有效降解,反应160min后矿化率达到71.8%.采用ESR和溴甲酚绿(Bromocresolgreen,BCG)法跟踪测定活性氧化物种,通过对RhB降解过程的紫外-可见光谱、红外光谱分析及总有机碳量(TOC)跟踪测定,结果表明,Fe³⁺/H₂O₂/RhB体系在可见光照射下主要的活性氧化物种为羟基自由基,能有效地降解RhB.     

新型香豆素硼氟荧光染料的合成及其光学性能

以邻氨基苯甲酸甲酯和4-二乙胺基水杨醛为原料,合成了一个新的香豆素喹啉衍生物3-{2-［8-(1H-苯并咪唑-2-基)喹啉-2-基］乙烯基}-7-二乙胺基香豆素(QMC),再与BF₃·Et₂O配位合成了硼氟配合物(BQMC),其结构经¹H NMR和MS(ESI)表征。并对BQMC的光学性能进行了研究。结果表明：BQMC的最大吸收波长在二氧六环中为490 nm,在DMSO中为532 nm; BQMC的最大发射波长在正己烷中为618 nm,在DMSO中为679 nm,与配体QMC相比,最大吸收波长红移了近50 nm,最大发射波长红移了近100 nm, BQMC的Stokes位移值从115 nm增至183 nm。在固态下,BQMC在750~825 nm之间有较宽的荧光发射峰,具有较强荧光。     

新型的香豆素染料/碘鎓盐光敏引发系统的研究

在实际应用中,大部分光敏引发系统只对紫外光敏感．近年来,随着Ａｒ＋（４８８ｎｍ）、ＹＡＧ（５３２ｎｍ）以及ＨｅＮｅ（６３３ｎｍ）激光技术的不断发展,高效的长波长光敏引发体系成为研究的重点．其中之一的方法是使引发剂直接感可见光,然而取得的结果并不显著．所以染料敏化又一次成为焦点．其中最重要的技术是使光敏引发系统的吸收波长移向长波长,并且具有高的灵敏度．大部分的光敏引发系统是由二个或三个组分组成,长波长的光引发聚合是通过以下两种不同过程得到实现［１］：（１）光敏系统直接吸收光并激发,（２）光引发系…     

(7-甲氧基-4-亚甲基)香豆素基-单氮杂-18-冠-6的阳离子识别性能研究

基于题示光敏离子载体MMC-MAC(O₅)与金属离子配位时荧光或延迟荧光性质的变化,研究了它作为光敏主体在乙腈或水溶液中对Li⁺,Na⁺,K⁺,Mg²⁺,Ba²⁺和Pb²⁺离子的识别性能,由改进的H-B方程计算得主客识别的稳定常数和敏感因子.结果表明,由于该光敏离子载体的香豆素的羰基能以七元环形式参与对金属离子的配位,在一定程度上增大了对客体离子的络合能力;在水溶液中,由于金属离子的溶剂化作用和因香豆素的羰基易与水形成氢键,影响了MMC-MAC(O₅)与客体离子的结合,稳定常数明显降低.基于MMC-MAC(O₅)的分子结构和与金属离子结合时荧光强度的增强,讨论了识别机理     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

关于"对‘燃料电池物理及化学性能的有限时间热力学分析方法'的讨论”答复

把有限时间热力学理论用于化学过程的研究,将会得到一系列新的结论,开展这方面的研究是很有意义的.文献[1]以燃料电池为例,在同时考虑化学反应及传热不可逆性的情况下,研究了燃料电池的性能界限,文献[2]指出了文献[1]计算化学反应及传热不可逆性而引起系统与有关环境的总熵产生率的错误以及由此而导致的结论所存在的问题,并进行了富有启发性的分析与讨论.但文献[2]对于系统与有关环境的总熵产生率的计算也是不正确的,由此得到的其它结论自然不能成立.本文将就此情况下系统与有关环境的总熵产生率的计算再次进行讨论,并给出电池功率和效率的有限时间热力学性能界限.