Superoxide Stabilization and a Universal KO2 Growth Mechanism in Potassium–Oxygen Batteries

Rechargeable potassium–oxygen (K‐O₂) batteries promise to provide higher round‐trip efficiency and cycle life than other alkali–oxygen batteries with satisfactory gravimetric energy density (935 Wh kg^?1). Exploiting a strong electron‐donating solvent, for example, dimethyl sulfoxide (DMSO) strongly stabilizes the discharge product (KO₂), resulting in significant improvement in electrode kinetics and chemical/electrochemical reversibility. The first DMSO‐based K‐O₂ battery demonstrates a much higher energy efficiency and stability than the glyme‐based electrolyte. A universal KO₂ growth model is developed and it is demonstrated that the ideal solvent for K‐O₂ batteries should strongly stabilize superoxide (strong donor ability) to obtain high electrode kinetics and reversibility while providing fast oxygen diffusion to achieve high discharge capacity. This work elucidates key electrolyte properties that control the efficiency and reversibility of K‐O₂ batteries.     

Singlet Oxygen Formation during the Charging Process of an Aprotic Lithium–Oxygen Battery

Aprotic lithium–oxygen (Li–O₂) batteries have attracted considerable attention in recent years owing to their outstanding theoretical energy density. A major challenge is their poor reversibility caused by degradation reactions, which mainly occur during battery charge and are still poorly understood. Herein, we show that singlet oxygen (¹Δ_g) is formed upon Li₂O₂ oxidation at potentials above 3.5 V. Singlet oxygen was detected through a reaction with a spin trap to form a stable radical that was observed by time‐ and voltage‐resolved in operando EPR spectroscopy in a purpose‐built spectroelectrochemical cell. According to our estimate, a lower limit of approximately 0.5 % of the evolved oxygen is singlet oxygen. The occurrence of highly reactive singlet oxygen might be the long‐overlooked missing link in the understanding of the electrolyte degradation and carbon corrosion reactions that occur during the charging of Li–O₂ cells.     

Fuel‐Free Bio‐photoelectrochemical Cells Based on a Water/Oxygen Circulation System with a Ni:FeOOH/BiVO4 Photoanode

A bio‐photoelectrochemical cell (BPEC) based on a fuel‐free self‐circulation water–oxygen–water system was fabricated. It consists of Ni:FeOOH modified n‐type bismuth vanadate (BiVO₄) photoanode and laccase catalyzed biocathode. In this BPEC, irradiation of the photoanode generates photocurrent for photo‐oxidation of water to oxygen, which is reduced to water again at the laccase biocathode. Of note, the by‐products of two electrode reactions could continue to be reacted, which means the H₂O and O₂ molecules are retained in an infinite loop of water–oxygen–water without any sacrificial chemical components. As a result, the assembled fuel‐free BPEC exhibits good performance with an open‐circuit potential of 0.97 V and a maximum power density of 205 μW cm^?2 at 0.44 V. This BPEC based on a self‐circulation system offers a fuel‐free model to enhance multiple energy conversion and application in reality.     

Imaging of Oxygen Diffusion in Individual Platinum/Ce2Zr2Ox Catalyst Particles During Oxygen Storage and Release

The spatial distribution of Ce³⁺ and Ce⁴⁺ in each particle of Ce₂Zr₂O_x in a three‐way conversion catalyst system was successfully imaged during an oxygen storage/release cycle by scanning X‐ray absorption fine structure (XAFS) using hard X‐ray nanobeams. For the first time, nano‐XAFS imaging visualized and identified the modes of non‐uniform oxygen diffusion from the interface of Pt catalyst and Ce₂Zr₂O_x support and the active parts in individual catalyst particles.     

A Neutrophil‐Inspired Supramolecular Nanogel for Magnetocaloric–Enzymatic Tandem Therapy

Neutrophils can responsively release reactive oxygen species (ROS) to actively combat infections by exogenous stimulus and cascade enzyme catalyzed bio‐oxidation. A supramolecular nanogel is now used as an artificial neutrophil by enzymatic interfacial self‐assembly of peptides (Fmoc‐Tyr(H₂PO₃)‐OH) with magnetic nanoparticles (MNPs) and electrostatic loading of chloroperoxidase (CPO). The MNPs within the nanogel can elevate H₂O₂ levels in cancer cells under programmed alternating magnetic field (AMF) similar to the neutrophil activator, and the loaded CPO within protective peptides nanolayer converts the H₂O₂ into singlet oxygen (¹O₂) in a sustained manner for neutrophil‐inspired tumor therapy. As a proof of concept study, both the H₂O₂ and ¹O₂ in cancer cells increase stepwise under a programmed alternating magnetic field. An active enzyme dynamic therapy by magnetically stimulated oxygen stress and sustained enzyme bio‐oxidation is thus shown with studies on both cells and animals.     

Superior Rechargeability and Efficiency of Lithium–Oxygen Batteries: Hierarchical Air Electrode Architecture Combined with a Soluble Catalyst

The lithium–oxygen battery has the potential to deliver extremely high energy densities; however, the practical use of Li‐O₂ batteries has been restricted because of their poor cyclability and low energy efficiency. In this work, we report a novel Li‐O₂ battery with high reversibility and good energy efficiency using a soluble catalyst combined with a hierarchical nanoporous air electrode. Through the porous three‐dimensional network of the air electrode, not only lithium ions and oxygen but also soluble catalysts can be rapidly transported, enabling ultra‐efficient electrode reactions and significantly enhanced catalytic activity. The novel Li‐O₂ battery, combining an ideal air electrode and a soluble catalyst, can deliver a high reversible capacity (1000 mAh g^?1) up to 900 cycles with reduced polarization (about 0.25 V).     

Revealing the A‐Site Effect of Lead‐Free A3Sb2Br9 Perovskite in Photocatalytic C(sp3)−H Bond Activation

The lead‐free halide perovskite A₃Sb₂Br₉ is utilized as a photocatalyst for the first time for C(sp³)?H bond activation. A₃Sb₂Br₉ nanoparticles (A₃Sb₂Br₉ NPs) with different ratios of Cs and CH₃NH₃ (MA) show different photocatalytic activities for toluene oxidation and the photocatalytic performance is enhanced when increasing the amount of Cs. The octahedron distortion caused by A‐site cations can change the electronic properties of X‐site ions and further affect the electron transfer from toluene molecules to Br sites. After the regulation of A‐site cations, the photocatalytic activity is higher with A₃Sb₂Br₉ NPs than that with classic photocatalysts (TiO₂, WO₃, and CdS). The main active species involved in photocatalytic oxidation of toluene are photogenerated holes (h⁺) and superoxide anions (^.O₂^?). The octahedron distortion by A‐site cations affecting photocatalytic activity remains unique and is also a step forward for understanding more about halide‐perovskite‐based photocatalysis. The relationship between octahedron distortion and photocatalysis can also guide the design of new photocatalytic systems involving other halide perovskites.     

Concentrated Electrolyte for the Sodium–Oxygen Battery: Solvation Structure and Improved Cycle Life

Alkali metal–oxygen batteries are of great interests for energy storage because of their unparalleled theoretical energy densities. Particularly attractive is the emerging Na–O₂ battery because of the formation of superoxide as the discharge product. Dimethyl sulfoxide (DMSO) is a promising solvent for this battery but its instability towards Na makes it impractical in the Na–O₂ battery. Herein we report the enhanced stability of Na in DMSO solutions containing concentrated sodium trifluoromethanesulfonimide (NaTFSI) salts (>3 mol kg^?1). Raman spectra of NaTFSI/DMSO electrolytes and ab initio molecular dynamics simulation reveal the Na⁺ solvation number in DMSO and the formation of Na(DMSO)₃(TFSI)‐like solvation structure. The majority of DMSO molecules solvating Na⁺ in concentrated solutions reduces the available free DMSO molecules that can react with Na and renders the TFSI anion decomposition, which protects Na from reacting with the electrolyte. Using these concentrated electrolytes, Na–O₂ batteries can be cycled forming sodium superoxide (NaO₂) as the sole discharge product with improved long cycle life, highlighting the beneficial role of concentrated electrolytes for Na‐based batteries.     

A Theoretical Study on the Mechanism of C2H4 Oxidation over a Neutral V3O8 Cluster

Density functional theory (DFT) calculations are used to investigate the reaction mechanism of V₃O₈+C₂H₄. The reaction of V₃O₈ with C₂H₄ produces V₃O₇CH₂+HCHO or V₃O₇+CH₂OCH₂ overall barrierlessly at room temperature, whereas formation of hydrogen‐transfer products V₃O₇+CH₃CHO is subject to a tiny overall free energy barrier (0.03 eV), although the formation of the last‐named pair of products is thermodynamically more favorable than that of the first two. These DFT results are in agreement with recent experimental observations. The (O_b)₂V(O_tO_t)^. (b=bridging, t=terminal) moiety containing the oxygen radical in V₃O₈ is the active site in the reaction with C₂H₄. Similarities and differences between the reactivities of (O_b)₂V(O_tO_t)^. in V₃O₈ and the small VO₃ cluster [(O_t)₂VO_t^.] are discussed. Moreover, the effect of the support on the reactivity of the (O_b)₂V(O_tO_t)^. active site is evaluated by investigating the reactivity of the cluster VX₂O₈, which is obtained by replacing the V atoms in the (O_b)₃VO_t support moieties of V₃O₈ with X atoms (X=P, As, Sb, Nb, Ta, Si, and Ti). Support X atoms with different electronegativities influence the oxidative reactivity of the (O_b)₂V(O_tO_t)^. active site through changing the net charge of the active site. These theoretical predictions of the mechanism of V₃O₈+C₂H₄ and the effect of the support on the active site may be helpful for understanding the reactivity and selectivity of reactive O^. species over condensed‐phase catalysts.     

Atomic‐Scale Insights into Surface Lattice Oxygen Activation at the Spinel/Perovskite interface of Co3O4/La0.3Sr0.7CoO3

Surface lattice oxygen in transition‐metal oxides plays a vital role in catalytic processes. Mastering activation of surface lattice oxygen and identifying the activation mechanism are crucial for the development and design of advanced catalysts. A strategy is now developed to create a spinel Co₃O₄ /perovskite La_0.3Sr_0.7CoO₃ interface by in situ reconstruction of the surface Sr enrichment region in perovskite LSC to activate surface lattice oxygen. XAS and XPS confirm that the regulated chemical interface optimizes the hybridized orbital between Co 3d and O 2p and triggers more electrons in oxygen site of LSC transferred into lattice of Co₃O₄ , leading to more inactive O^2? transformed into active O^2?x. Furthermore, the activated Co₃O₄/LSC exhibits the best catalytic activities for CO oxidation, oxygen evolution, and oxygen reduction. This work would provide a fundamental understanding to explain the activation mechanism of surface oxygen sites.     

CO2 Overall Splitting by a Bifunctional Metal‐Free Electrocatalyst

Photo/electrochemical CO₂ splitting is impeded by the low cost‐effective catalysts for key reactions: CO₂ reduction (CDRR) and water oxidation. A porous silicon and nitrogen co‐doped carbon (SiNC) nanomaterial by a facile pyrolyzation was developed as a metal‐free bifunctional electrocatalyst. CO₂‐to‐CO and oxygen evolution (OER) partial current density under neutral conditions were enhanced by two orders of magnitude in the Tafel regime on SiNC relative to single‐doped comparisons beyond their specific area gap. The photovoltaic‐driven CO₂ splitting device with SiNC electrodes imitating photosynthesis yielded an overall solar‐to‐chemical efficiency of advanced 12.5 % (by multiplying energy efficiency of CO₂ splitting cell and photovoltaic device) at only 650 mV overpotential. Mechanism studies suggested the elastic electron structure of ?Si(O)?C?N? unit in SiNC as the highly active site for CDRR and OER simultaneously by lowering the free energy of CDRR and OER intermediates adsorption.     

Sites for Methane Activation on Lithium‐Doped Magnesium Oxide Surfaces

Density functional calculations yield energy barriers for H abstraction by oxygen radical sites in Li‐doped MgO that are much smaller (12±6 kJ mol^?1) than the barriers inferred from different experimental studies (80–160 kJ mol^?1). This raises further doubts that the Li⁺O^.? site is the active site as postulated by Lunsford. From temperature‐programmed oxidative coupling reactions of methane (OCM), we conclude that the same sites are responsible for the activation of CH₄ on both Li‐doped MgO and pure MgO catalysts. For a MgO catalyst prepared by sol–gel synthesis, the activity proved to be very different in the initial phase of the OCM reaction and in the steady state. This was accompanied by substantial morphological changes and restructuring of the terminations as transmission electron microscopy revealed. Further calculations on cluster models showed that CH₄ binds heterolytically on Mg²⁺O^2? sites at steps and corners, and that the homolytic release of methyl radicals into the gas phase will happen only in the presence of O₂.     

Enzyme‐Inspired Room‐Temperature Lithium–Oxygen Chemistry via Reversible Cleavage and Formation of Dioxygen Bonds

Li‐O₂ batteries are promising energy storage systems due to their ultra‐high theoretical capacity. However, most Li‐O₂ batteries are based on the reduction/oxidation of Li₂O₂ and involve highly reactive superoxide and peroxide species that would cause serious degradation of cathodes, especially carbon‐based materials. It is important to explore lithium‐oxygen reactions and find new Li‐O₂ chemistry which can restrict or even avoid the negative influence of superoxide/peroxide species. Here, inspired by enzyme‐catalyzed oxygen reduction/oxidation reactions, we introduce a copper(I) complex 3 N‐Cu^I (3 N=1,4,7‐trimethyl‐1,4,7‐triazacyclononane) to Li‐O₂ batteries and successfully modulate the reaction pathway to a moderate one on reversible cleavage/formation of O?O bonds. This work demonstrates that the reaction pathways of Li‐O₂ batteries could be modulated by introducing an appropriate soluble catalyst, which is another powerful choice to construct better Li‐O₂ batteries.     

Direct Detection of the Superoxide Anion as a Stable Intermediate in the Electroreduction of Oxygen in a Non‐Aqueous Electrolyte Containing Phenol as a Proton Source

The non‐aqueous Li–air (O₂) battery has attracted intensive interest because it can potentially store far more energy than today′s batteries. Presently Li–O₂ batteries suffer from parasitic reactions owing to impurities, found in almost all non‐aqueous electrolytes. Impurities include residual protons and protic compounds that can react with oxygen species, such as the superoxide (O₂^?), a reactive, one‐electron reduction product of oxygen. To avoid the parasitic reactions, it is crucial to have a fundamental understanding of the conditions under which reactive oxygen species are generated in non‐aqueous electrolytes. Herein we report an in situ spectroscopic study of oxygen reduction on gold in a dimethyl sulfoxide electrolyte containing phenol as a proton source. It is shown directly that O₂^?, not HO₂, is the first stable intermediate during the oxygen reduction process to hydrogen peroxide. The unusual stability of O₂^? is explained using density functional theory (DFT) calculations.     

Manganese,Iron, Cobalt,and Nickel Oxo‐, Peroxo‐, and Superoxoclusters: A Density Functional Theory Study

The 3d‐transition‐metal dioxo‐, peroxo‐, and superoxoclusters with the general composition MO₂, M(O₂), and MOO (M=Mn, Fe, Co, and Ni) were studied by DFT by the B1LYP functional. The dioxides in their ground states represent the global minima for the M+O₂ system. Both ground‐state dioxides and the lowest‐energy peroxides are in their (d‐only) highest spin states. The ⁶A₁ state of Co(O₂) exceeds the d‐only spin‐multiplicity value (quartet), being nearly isoenergetic with the ⁴A₁ state of Co(O₂). The energy gain on transforming the peroxides to the corresponding dioxides decreases in the order Mn(O₂)>Fe(O₂)>Co(O₂)>Ni(O₂) and varies in the range 0.27–1.8 eV. The dissociation energy to M+O₂ for all studied peroxides is less than 1 eV being the lowest (0.47 eV) for Mn(O₂). The Mn and Fe peroxides need less than 0.3 eV to rupture one of the MO bonds to form the corresponding superoxide. Mn and Fe superoxides are less stable than the corresponding peroxides; the superoxide of Co is more stable than its peroxide, while Ni superoxide is unstable—its energy is above the limit of dissociation to Ni+O₂. According to the electrostatic potential maps, the oxygen atoms in the peroxides are more nucleophilic than those in the dioxides and superoxides, in which the terminal oxygen atom is more nucleophilic than the M‐bonded oxygen atom. This result differs from the expectations based on charge‐distribution analysis.     

Structure Sensitivity of CO Oxidation on Co3O4: A DFT Study

The reaction mechanism of CO oxidation on the Co₃O₄ (110) and Co₃O₄ (111) surfaces is investigated by means of spin‐polarized density functional theory (DFT) within the GGA+U framework. Adsorption situation and complete reaction cycles for CO oxidation are clarified. The results indicate that 1) the U value can affect the calculated energetic result significantly, not only the absolute adsorption energy but also the trend in adsorption energy; 2) CO can directly react with surface lattice oxygen atoms (O_2f/O_3f) to form CO₂ via the Mars–van Krevelen reaction mechanism on both (110)‐B and (111)‐B; 3) pre‐adsorbed molecular O₂ can enhance CO oxidation through the channel in which it directly reacts with molecular CO to form CO₂ [O₂(a)+CO(g)→CO₂(g)+O(a)] on (110)‐A/(111)‐A; 4) CO oxidation is a structure‐sensitive reaction, and the activation energy of CO oxidation follows the order of Co₃O₄ (111)‐A(0.78 eV)>Co₃O₄ (111)‐B (0.68 eV)>Co₃O₄ (110)‐A (0.51 eV)>Co₃O₄ (110)‐B (0.41 eV), that is, the (110) surface shows higher reactivity for CO oxidation than the (111) surface; 5) in addition to the O_2f, it was also found that Co³⁺ is more active than Co²⁺, so both O_2f and Co³⁺ control the catalytic activity of CO oxidation on Co₃O₄, as opposed to a previous DFT study which concluded that either Co³⁺ or O_2f is the active site.     

A Phototheranostic Strategy to Continuously Deliver Singlet Oxygen in the Dark and Hypoxic Tumor Microenvironment

Continuous irradiation during photodynamic therapy (PDT) inevitably induces tumor hypoxia, thereby weakening the PDT effect. In PDT‐induced hypoxia, providing singlet oxygen from stored chemical energy may enhance the cell‐killing effect and boost the therapeutic effect. Herein, we present a phototheranostic (DPPTPE@PEG‐Py NPs) prepared by using a 2‐pyridone‐based diblock polymer (PEG‐Py) to encapsulate a semiconducting, heavy‐atom‐free pyrrolopyrrolidone‐tetraphenylethylene (DPPTPE) with high singlet‐oxygen‐generation ability both in dichloromethane and water. The PEG‐Py can trap the ¹O₂ generated from DPPTPE under laser irradiation and form a stable intermediate of endoperoxide, which can then release ¹O₂ in the dark, hypoxic tumor microenvironment. Furthermore, fluorescence‐imaging‐guided phototherapy demonstrates that this phototheranostic could completely inhibit tumor growth with the help of laser irradiation.     

Nanoscale Metal–Organic Framework–Hemoglobin Conjugates

A metal–organic framework (MOF)–protein conjugate, NH₂‐MIL‐125(Ti)‐hemoglobin [MIL‐125(Ti)‐Hb], was synthesized by a covalent postmodification strategy. The crystalline structure was maintained after chemical and protein modification. The content of grafted Hb was tuned by the stoichiometric ratio and reached 50 wt % if the mass ratio of MIL‐125(Ti)/Hb was 1:1.25 in the feed. The oxygen‐transporting capacity of grafted Hb was kept, and the P₅₀ (the half O₂ pressure saturated with O₂) and Hill coefficients of the MIL‐125(Ti)‐Hb conjugate were found to be 22.9 mm Hg and 2.35, respectively, which are close to the respective values of free Hb. All the results indicate that the MIL‐125(Ti)‐Hb conjugate could be potentially used as an oxygen carrier.     

Highly Efficient CH Hydroxylation of Carbonyl Compounds with Oxygen under Mild Conditions

A transition‐metal‐free Cs₂CO₃‐catalyzed α‐hydroxylation of carbonyl compounds with O₂ as the oxygen source is described. This reaction provides an efficient approach to tertiary α‐hydroxycarbonyl compounds, which are highly valued chemicals and widely used in the chemical and pharmaceutical industry. The simple conditions and the use of molecular oxygen as both the oxidant and the oxygen source make this protocol very environmentally friendly and practical. This transformation is highly efficient and highly selective for tertiary C(sp³)? H bond cleavage.     

Highly Efficient C?H Hydroxylation of Carbonyl Compounds with Oxygen under Mild Conditions

A transition‐metal‐free Cs₂CO₃‐catalyzed α‐hydroxylation of carbonyl compounds with O₂ as the oxygen source is described. This reaction provides an efficient approach to tertiary α‐hydroxycarbonyl compounds, which are highly valued chemicals and widely used in the chemical and pharmaceutical industry. The simple conditions and the use of molecular oxygen as both the oxidant and the oxygen source make this protocol very environmentally friendly and practical. This transformation is highly efficient and highly selective for tertiary C(sp³) H bond cleavage.