Effect of Non‐Specifically Adsorbed Ions on the Surface Oxidation of Pt(111)

The oxidation processes of a Pt(111) electrode in alkaline electrolytes depend on non‐specifically adsorbed ions according to in situ X‐ray diffraction and infrared spectroscopic measurements. In an aqueous solution of LiOH, an OH_ad adlayer is formed in the first oxidation step of the Pt(111) electrode as a result of the strong interaction between Li⁺ and OH_ad, whereas Pt oxidation proceeds without OH_ad formation in CsOH solution. Structural analysis by X‐ray diffraction indicates that Li⁺ is strongly protective against surface roughening caused by subsurface oxidation. Although Cs⁺ is situated near the Pt surface, the weak protective effect of Cs⁺ results in irreversible surface roughening due to subsurface oxidation.     

High efficiency of Mn–Ce‐modified TiO2 catalysts for the low‐temperature oxidation of Hg0 under a reducing atmosphere

Manganese‐ and cerium oxide‐modified titania catalysts were prepared by the deposition precipitation for the removal of elemental mercury (Hg⁰) from simulated yellow phosphorus off‐gas at low temperature. In addition, these catalysts were characterized by X‐ray diffraction, Brunauer–Emmett–Teller measurements, X‐ray photoelectron spectroscopy and field‐emission scanning electron microscope to determine the surface morphology of the obtained compounds and explore their formation mechanism. The results revealed that a Mn–Ce loading and reaction temperature of 10% and 150 °C, respectively, as well as a Mn/Ce molar ratio of 2:1, led to an optimal efficiency for the oxidation of elemental mercury. Furthermore, the effects of flue gas components were investigated. The presence of O₂ clearly promoted the oxidation of Hg⁰. A CO atmosphere did not affect the Hg⁰ oxidation, when compared with N₂, whereas the presence of H₂S and water vapor inhibited the oxidation process. Furthermore, the X‐ray photoelectron spectroscopy spectra of Hg 4f revealed that the elemental mercury adsorbed by the catalyst is present as HgO. Finally, the Hg⁰ catalytic oxidation mechanism was discussed on the basis of the experimental results and characterization analysis.     

Dinuclear Palladium Complexes with Two Ligand‐Centered Radicals and a Single Bridging Ligand: Subtle Tuning of Magnetic Properties

The facile and tunable preparation of unique dinuclear [(L^?)Pd?X?Pd(L^?)] complexes (X=Cl or N₃), bearing a ligand radical on each Pd, is disclosed, as well as their magnetochemistry in solution and solid state is reported. Chloride abstraction from [PdCl( NNO^ISQ )] ( NNO^ISQ =iminosemiquinonato) with TlPF₆ results in an unusual monochlorido‐bridged dinuclear open‐shell diradical species, [{Pd( NNO ^ISQ)}₂(μ‐Cl)]⁺, with an unusually small Pd‐Cl‐Pd angle (ca. 93°, determined by X‐ray). This suggests an intramolecular d⁸–d⁸ interaction, which is supported by DFT calculations. SQUID measurements indicate moderate antiferromagnetic spin exchange between the two ligand radicals and an overall singlet ground state in the solid state. VT EPR spectroscopy shows a transient signal corresponding to a triplet state between 20 and 60 K. Complex 2 reacts with PPh₃ to generate [Pd(NNO^ISQ)(PPh₃)]⁺ and one equivalent of [PdCl( NNO^ISQ )]. Reacting an 1:1 mixture of [PdCl( NNO^ISQ )] and [Pd(N₃)( NNO^{I SQ})] furnishes the 1,1‐azido‐bridged dinuclear diradical [{Pd( NNO ^ISQ)}₂(κ¹‐N;μ‐N₃]⁺, with a Pd‐N‐Pd angle close to 127° (X‐ray). Magnetic and EPR measurements indicate two independent S=1/2 spin carriers and no magnetic interaction in the solid state. The two diradical species both show no spin exchange in solution, likely because of unhindered rotation around the Pd?X?Pd core. This work demonstrates that a single bridging atom can induce subtle and tunable changes in structural and magnetic properties of novel dinuclear Pd complexes featuring two ligand‐based radicals.     

Visualization of the Heterogeneity of Cerium Oxidation States in Single Pt/Ce2Zr2Ox Catalyst Particles by Nano‐XAFS

The cerium oxidation states in single catalyst particles of Pt/Ce₂Zr₂O_x (x=7 to 8) were investigated by spatially resolved nano X‐ray absorption fine structure (nano‐XAFS) using an X‐ray nanobeam. Differences in the distribution of the Ce oxidation states between Pt/Ce₂Zr₂O_x single particles of different oxygen compositions x were visualized in the obtained two‐dimensional X‐ray fluorescent (XRF) mapping images and the Ce L_III‐edge nano X‐ray absorption near‐edge structure (nano‐XANES) spectra.     

Catalytic Hydrodechlorination of 1,2,4,5‐Tetrachlorobenzene over Various Supports Loaded Palladium Catalysts

Water pollution by polychlorinated aromatic hydrocarbons has always been a global issue. In this work, we reported a synthesis of supported palladium catalysts Pd/C, Pd/CeO₂, Pd/SBA‐15, Pd/ZrO₂,Pd/SiO₂, and Pd/Al₂O₃ as well as their catalytic activities on hydrodechlorination (HDC) of 1,2,4,5‐tetrachlorobenzene (TeCB). These Pd catalysts were characterized by Brunauer‐Emmett‐Teller (BET) specific surface area, Transmission electron microscopy (TEM), X‐ray diffraction (XRD), energy Dispersive X‐ray Fluorescence (EDXRF), CO‐chemisorption, and H2‐temperature programmed reduction (H2‐TPR) analysis. Pd/C, Pd/CeO₂ and Pd/SBA‐15 catalysts showed relatively high catalytic activities. The catalytic activities were associated with dispersion of Pd, metal surface area, and reaction temperature, etc.     

Pd‐Cu alloy nanoparticle supported on amine‐terminated ionic liquid functional 3D graphene and its application on Suzuki cross‐coupling reaction

Well distributed Pd‐Cu bimetallic alloy nanoparticles supported on amine‐terminated ionic liquid functional three‐dimensional graphene (3D IL‐rGO/Pd‐Cu) as an efficient catalyst for Suzuki cross‐coupling reaction has been prepared via a facile synthetic method. The introduction of IL‐NH₂ cations on the surface of graphene sheets can effectively avoid the re‐deposition of graphene sheets, allowing the catalyst to be reused up to 10 cycles. The addition of Cu not only saves cost but also ensures high catalytic efficiency. It is worthy to note that the catalyst 3D IL‐rGO/Pd_2.5Cu_2.5 can efficiently catalyze the Suzuki cross‐coupling reaction with the yield up to 100% in 0.25 h, almost one‐fold higher than that by the pristine IL‐rGO/Pd_2.5 catalyst (52%). The Powder X‐Ray Diffraction (XRD), combining energy dispersive X‐ray spectroscopy (EDS) mapping results confirm the existence and distribution of Pd and Cu in the bimetallic nanoparticles. The transmission electron microscopy (TEM) reveals the nanoparticle size with an average diameter of 3.0 ± 0.5 nm. X‐ray photoelectron spectroscopy (XPS) analysis proved the presence of electron transfer from Cu to Pd upon alloying. Such alloying‐induced electronic modification of Pd‐Cu alloy and 3D ionic liquid functional graphene with large specific surface area both accounted for the catalytic enhancement.     

Pd–Schiff base complex supported on Fe3O4 magnetic nanoparticles: A new and highly efficient reusable catalyst for C–C bond formation in water

A protocol is introduced for the preparation of a new cage‐like Pd–Schiff base organometallic complex supported on Fe₃O₄ nanoparticles (Fe₃O₄@Schiff‐base‐Pd). The structure of the nanomagnetic catalyst was comprehensively characterized using Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), energy‐dispersive X‐ray spectroscopy, Brunauer–Emmett–Teller measurements, scanning electron microscopy (SEM), transmission electron microscopy, X‐ray mapping, thermogravimetric analysis, vibrating sample magnetometry and inductively coupled plasma atomic emission spectroscopy. In the second stage, the catalytic activity of this catalyst was studied in the Suzuki and Heck cross‐coupling reactions in water as a green solvent. In this sense, simple preparation of the catalyst from commercially available materials, high catalytic activity, simple operation, short reaction times, high yields and use of green solvent are some advantages of this protocol. Finally, the nanocatalyst was easily recovered, using an external magnet, and reused several times without significant loss of its catalytic efficiency. In addition, the stability of the catalyst after recycling was confirmed using SEM, XRD and FT‐IR techniques.     

Palladium nanoparticles supported on modified hollow Fe3O4@TiO2: Preparation,characterization, and catalytic activity in Suzuki cross‐coupling reactions

Hollow Fe₃O₄@TiO₂‐NH₂/Pd as a light‐weight, magnetically heterogeneous catalyst was successfully prepared, and characterized by using different techniques including X‐ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), field‐emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX), vibrating sample magnetometer (VSM) measurements, and thermogravimetric analysis (TGA). Then this heterogeneous catalyst was tested in the Suzuki cross‐coupling reaction, and the results confirmed the success of this method. The catalyst could be separated easily using an external magnet and reused at least in five runs successfully without any appreciable loss in its catalytic activity.     

Highly Efficient AuPd/Carbon Nanotube Nanocatalysts for the Electro‐Fenton Process

Development of novel nanocatalysts for the highly efficient in situ synthesis of H₂O₂ from H₂ and O₂ in the electro‐Fenton (EF) process has potential for the remediation of water pollution. In this work, AuPd/carbon nanotube (CNT) nanocatalysts were successfully synthesized by the facile aggregation of AuPd bimetals on CNTs. Characterization by X‐ray diffraction, transmission electron microscopy, and X‐ray photoelectron spectroscopy indicated that pure AuPd bimetallic heterogeneous nanospheres (≈20 nm) were well dispersed outside the CNTs, which resulted in better catalytic performance than Pd/CNTs alone: 0.36 M H₂O₂ was synthesized; 0.05 M Fe²⁺ optimally initiated the EF process due to the superior in situ Fe²⁺ regeneration; and the organic pollutant removal reached 100 % at 37 min, with a pseudo‐first‐order kinetic constant k₁=0.051 min^?1. Moreover, structural insights before/after catalysis revealed that Au strengthened the construction of the nanocrystals, avoided negative deactivation caused by AuPd agglomeration, and immobilized the active Pd(111). The catalytic stability of AuPd/CNTs over ten cycles implied long durability and promising applications of this material.     

Template‐free anion‐controlled synthesis of Pd (II) nano‐aggregates for the antifouling polymerization of CO and ethylene

The reaction of [(domppp) Pd (OAc)₂] [domppp = 1,3‐bis (di‐o‐methoxyphenylphosphino)propane] and imidazolium‐functionalized carboxylic acids containing various anions (Br^?, PF₆^?, SbF₆^? and BF₄^?) resulted in the formation of nano‐sized Pd (II) aggregates under template‐free conditions. The rate of formation of aggregates can be modulated by changing the anion, affecting the rate of polymerization of CO and olefins without fouling. Herein, we describe the analysis of Pd (II) catalysts by dynamic light scattering, atomic force microscopy, X‐ray photoelectron spectroscopy and X‐ray crystallography, and co‐ and terpolymerization results including the catalytic activity, and bulk density and molecular weight of polymers.     

Photocatalytic Activity of Fe and Ce Co‐doped Mesoporous TiO2 Catalyst under UV and Visible Light

The catalysts of un‐doped, single‐doped and co‐doped mesoporous titanium dioxide (MTiO₂) were prepared by a template method with tetrabutyltitanate (Ti(OC₄H₉)₄) as a Ti source material and Pluronic P123 as a template. The photo‐absorbance of the obtained catalysts was measured by UV‐vis absorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl orange (MO) (50 mg/L) in an aqueous solution. It was shown that the co‐doped MTiO₂ could be activated by visible light and could thus be used as an effective catalyst in photo‐oxidation reactions. The effect of Fe and Ce co‐dopants on the material properties was investigated by X‐ray diffraction (XRD), scanning electron microscopy (SEM) and N₂ adsorption‐desorption isotherm measurement. The characterizations indicated that the photocatalysts possessed a homogeneous pore diameter of ca. 10 nm with high surface area of ca. 150 m²/g. The photocatalytic activity of MTiO₂ co‐doped with Fe and Ce was markedly improved due to the synergistic actions of the two dopants.     

Syntheses and Characterizations of Two Palladium(II) Complexes of 5‐Mercapto‐1‐methyltetrazole

Reaction of PdCl₂(CH₃CN)₂ with the sodium salt of 5‐mercapto‐1‐methyltetrazole (MetzSNa) in methanol solution affords an interesting dinuclear palladium complex [Pd₂(MetzS)₄ ] ( 1 ). However, treatment of PdCl₂(CH₃CN)₂ with neutral MetzSH ligand in methanol solution produces a mononuclear palladium complex [Pd(MetzSH)₄]Cl₂ ( 2 ). Both complexes were characterized by IR, ¹HNMR, UV‐Vis spectroscopy as well as X‐ray crystallography. Single‐crystal X‐ray diffraction analyses of two complexes lead to the elucidation of the structures and show that 1 possesses an asymmetric structure: one Pd atom is tetracoordinated by three sulfur atoms and one nitrogen atom to form PdS₃N coordination sphere, the other Pd atom is tetracoordinated by three nitrogen atoms and one sulfur atom to form PdSN₃ coordination sphere. The molecules of 1 are associated to 1‐D infinite linear chain by weak intermolecular Pd···S contacts in the crystal lattice. In 2 , the Pd atom lies on an inversion center and has a square‐planar coordination involving the S atoms from four MetzSH ligands. The two chloride ions are not involved in coordination, but are engaged in hydrogen bonding.     

Sonophotocatalytic treatment of diazinon using visible light‐driven Ce:Cu‐1,4‐BDOAH2 photocatalyst in a batch‐mode process: Response surface methodology and optimization

Cu–1,4‐benzenedioxyacetic acid (Cu‐1,4‐BDOAH₂) with a narrow band gap (2.52 eV) was synthesized and doped with Ce to afford Ce:Cu‐1,4‐BDOAH₂ as an efficient photocatalyst with narrower band gap (2.39 eV). The prepared Cu‐1,4‐BDOAH₂ and Ce:Cu‐1,4‐BDOAH₂ were characterized using Fourier transform infrared, energy‐dispersive X‐ray, diffuse reflectance spectroscopies, scanning electron microscopy and X‐ray diffraction. The sonophotocatalytic degradation of diazinon was carried out in a batch‐mode reactor using visible light‐driven Ce:Cu‐1,4‐BDOAH₂ photocatalyst as well as ultrasonic irradiation. The narrow band gap of the photocatalyst means that it can be activated under visible light illumination. The effects of operational parameters such as initial diazinon concentration (5–25 mg l^?1), pH (2–10), photocatalyst dosage (10–30 mg) and irradiation time (10–30 min) on the sonophotocatalytic degradation efficiency were investigated using central composite design under response surface methodology. The optimization process was studied using desirability function and the results indicated 99.8% degradation, which was obtained at optimum values of 25 mg l^?1, 6, 20 mg and 20 min for the initial concentration of diazinon, pH, photocatalyst dosage and irradiation time, respectively. Reusability experiments of Ce:Cu‐1,4‐BDOAH₂ photocatalyst showed that it is quite stable with excellent catalytic activity even after five cycles.     

Anticancer metallopharmaceutical agents based on mixed‐ligand palladium(II) complexes with dithiocarbamates and tertiary organophosphine ligands

Mixed‐ligand palladium(II) complexes of the type [(DT)Pd(PR₃)Cl], where DT = diethyldithiocarbamate (1), dibutyldithiocarbamate (2,3), dipropyldithiocarbamate (4,5), bis(2‐methoxyethyl)dithiocarbamate; PR₃ = benzyldiphenylphosphine (1,4), diphenyl‐o‐tolylphosphine (2), diphenyl‐t‐butylphosphine (3), P‐chlorodiphenylphosphine (5) and triphenylphosphine (6), have been synthesized and characterized by elemental analyses and FT‐IR, Raman and multinuclear NMR spectroscopy. The structures of compounds 1 and 2 were determined by single‐crystal X‐ray diffraction (XRD) measurements and these analyses showed that the complexes have pseudo square‐planar geometry around the Pd(II) and that the dithiocarbamate ligand is bound in a bidentate fashion, while the remaining two positions are occupied by a tertiary organophosphine and a chloride ligand. The anticancer studies showed that the Pd(II) complexes are highly active against cisplatin‐resistant DU145 human prostate carcinoma (HTB‐81) cells with the highest activity shown by compound 6 (IC₅₀ = 2.12 µm ). The redox behavior and ds‐DNA‐denaturing ability of the complexes were studied by cyclic voltammetry and two reduction and one oxidation waves were observed. The decrease in the reduction peak currents illustrated the consumption of the mixed‐ligand drug by the DNA molecule. Copyright © 2013 John Wiley & Sons, Ltd.     

Biosynthesis of Pd/MnO2 nanocomposite using Solanum melongena plant extract and its application for the one‐pot synthesis of 5‐substituted 1H‐tetrazoles from aryl halides

In this work, for the first time, Solanum melongena plant extract was used for the green synthesis of Pd/MnO₂ nanocomposite via reduction osf Pd(II) ions to Pd(0) and their immobilization on the surface of manganese dioxide (MnO₂) nanoparticles (NPs) as an effective support. The synthesized nanocomposite were characterized by various analytical techniques such as Fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray spectroscopy (EDS) and UV–Vis spectroscopy. The catalytic activity of Pd/MnO₂ nanocomposite was used as a heterogeneous catalyst for the one‐pot synthesis of 5‐substituted 1H‐tetrazoles from aryl halides containing various electron‐donating or electron‐withdrawing groups in the presence of K ₄ [Fe (CN) ₆ ] as non‐toxic cyanide source and sodium azide. The products were obtained in good yields via a simple methodology and easy work‐up. The nanocatalyst can be recycled and reused several times with no remarkable loss of activity.     

Coumarinyl azoimidazolyl complexes of osmium(II) hydridocarbonyls: spectroscopic and structural characterization,oxidation catalysis,photovoltaic effect and density functional theory computation

Os(II) hydridocarbonyl complexes of coumarinyl azoimidazoles, [Osh(CO)(PPh₃)₂(CZ‐4R‐R′)]^0/+ ( 3 , 4 ) (CZ‐R‐H = 2‐(coumarinyl‐6‐azo)‐4‐substituted imidazole or 1‐alkyl‐2‐(coumarinyl‐6‐azo)‐4‐substituted imidazole), were characterized from spectroscopic data and the single‐crystal X‐ray data for one of the complexes, [Osh(CO)(PPh₃)₂(CZ‐4‐Ph)] ( 3c ) (CZ‐4‐Ph = 2‐(coumarinyl‐6‐azo)‐4‐phenylimidazolate), confirmed the structure. The complexes show higher emission (quantum yield ? = 0.0163–0.16) and longer lifetime (τ = 1.4–10.3 ns) than free ligands (? = 0.0012–0.0185 and τ = 0.685–1.306 ns). Cyclic voltammetry shows quasi‐reversible metal oxidation at 0.67–0.94 V for [Os(III)/Os(II)] and 1.21–1.36 V for [Os(IV)/Os(III)] and subsequent azo reductions (?0.68 to ?0.95 V for [? N?N? ]/[? N N? ]^? and irreversible < ?1.2 V for [? N N? ]^?/[? N? N? ]^2?) of the chelated coumarinyl azoimidazole. The complexes are photostable and show better photovoltaic power conversion efficiency than free ligands. Also, the complexes were used as catalysts for the oxidation of primary/secondary alcohols to aldehydes/ketones using oxidizing agents like N‐methylmorpholine N‐oxide, t‐BuOOH and H₂O₂. Density functional theory computation was carried out from the optimized structures and the data obtained were used to interpret the electronic and photovoltaic properties. Copyright © 2016 John Wiley & Sons, Ltd.     

Electroless plating of copper on fly ash cenospheres using polyaniline‐Pd activation

The polyaniline of different intrinsic oxidation states, viz., the emeraldine (EM) and the leucoemeraldine (LM) states, were coated on 3‐aminopropyltriethoxy silane modified fly ash cenospheres. Without prior sensitization by SnCl₂ solution, Pd activation by PdCl₂ solution was carried out on EM and LM laden cenospheres, followed by electroless plating of copper (Cu). The topography and composition of the composites were characterized by scanning electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy, etc. The results indicate that the oxidation state of the LM layer showed a much bigger increase than that of the EM layer in the Pd activation process, while coupled Pd reduction underwent to a more extent on the LM layer. The metallic Pd atoms on the LM and EM layers surface initiated the subsequent electroless plating of Cu, and the coated Cu on LM laden cenospheres had a much more uniform and compact morphology than that on EM laden cenospheres. Copyright © 2012 John Wiley & Sons, Ltd.     

Pd/CNT Catalysts for Glycerol Electro‐oxidation: Effect of Pd Loading on Production of Valuable Chemical Products

Glycerol (C₃H₈O₃), a waste product of biodiesel, is considered as a suitable substrate for electro‐oxidation process to generate high value‐added products. A suitable active catalyst could improve the yield of desirable organic compounds from electro‐oxidation of glycerol. In this work, palladium nanoparticles supported over activated multi‐walled carbon nanotubes (MWCNTs) with varying loadings of 5 %–40 % were prepared using chemical reduction method and used to study their potential for electro‐oxidation of glycerol to produce various high value‐added products. The catalysts were characterized by different physicochemical methods, such as X‐ray diffraction (XRD), N₂ adsorption‐desorption, and Transmission electron microscopy (TEM), whereas the electro‐oxidation activity of the catalysts was analysed using cyclic voltammetry (CV) and chronoamperometry (CA), and the products were identified by high performance liquid chromatography (HPLC). The electrochemical surface area (S_ESA) and mass activity (MA) were increased from 176.98 m² g^?1 to 282.29 m² g^?1 and 12.22 mA mg^?1 to 49.53 mA mg^?1 by increasing the Pd‐loading from 5 % to 20 %, respectively. While the further increase to 40 % Pd loading, the S_ESA and MA values decreased to 231.45 m² g^?1 and 47.63 mA mg^?1respectively. The results found that the optimum 20 % Pd‐loading showed the excellent electrochemical properties due to uniform distribution of Pd‐metal particles over MWCNTs. High performance liquid chromatography (HPLC) showed the tartronic acid, glyceric acid and glyceraldehyde as dominant products. Mechanism of the reaction has also been proposed based on product distribution.     

Revealing the Active Species for Aerobic Alcohol Oxidation by Using Uniform Supported Palladium Catalysts

The active species in supported metal catalysts are elusive to identify, and large quantities of inert species can cause significant waste. Herein, using a stoichiometrically precise synthetic method, we prepare atomically dispersed palladium–cerium oxide (Pd₁/CeO₂) and hexapalladium cluster–cerium oxide (Pd₆/CeO₂), as confirmed by spherical‐aberration‐corrected transmission electron microscopy and X‐ray absorption fine structure spectroscopy. For aerobic alcohol oxidation, Pd₁/CeO₂ shows extremely high catalytic activity with a TOF of 6739 h^?1 and satisfactory selectivity (almost 100 % for benzaldehyde), while Pd₆/CeO₂ is inactive, indicating that the true active species are single Pd atoms. Theoretical simulations reveal that the bulkier Pd₆ clusters hinder the interactions between hydroxy groups and the CeO₂ surface, thus suppressing synergy of Pd‐Ce perimeter.     

Growth,characterization and interfacial reaction of magnetron sputtered Pt/CeO2 thin films on Si and Si3N4 substrates

Growth of magnetron sputtered Pt/CeO₂ thin films on Si and Si₃N₄ were characterized by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and X‐ray photoelectron spectroscopy (XPS). Interaction of Pt/CeO₂ films with Si on Si and Si₃N₄ substrates was extensively investigated by XPS. XRD studies show that films are oriented preferentially to (200) direction of CeO₂. XPS results show that Pt is mainly present in +2 oxidation state in Pt/CeO₂/Si film, whereas Pt⁴⁺ predominates in Pt/CeO₂/Si₃N₄ film. Concentration of Pt⁴⁺ species is more than four times on Si₃N₄ substrate as compared with that on Si. Ce is present as both +4 and +3 oxidation states in Pt/CeO₂ films deposited on Si and Si₃N₄ substrates, but concentration of Ce³⁺ species is more in Pt/CeO₂/Si film. Interfacial reaction between CeO₂ and Si substrate is controlled in the presence of Pt. Pt/Ce concentration ratio decreases in Pt/CeO₂/Si₃N₄ film upon successive sputtering, whereas this ratio decreases initially and then increases in Pt/CeO₂/Si film. Copyright © 2015 John Wiley & Sons, Ltd.