Synthesis and Characterization of 5‐Cyanotetrazolide‐Based Ionic Liquids

New salts based on imidazolium, pyrrolidinium, phosphonium, guanidinium, and ammonium cations together with the 5‐cyanotetrazolide anion [C₂N₅]^? are reported. Depending on the nature of cation–anion interactions, characterized by XRD, the ionic liquids (ILs) have a low viscosity and are liquid at room temperature or have higher melting temperatures. Thermogravimetric analysis, cyclic voltammetry, viscosimetry, and impedance spectroscopy display a thermal stability up to 230 °C, an electrochemical window of 4.5 V, a viscosity of 25 mPa s at 20 °C, and an ionic conductivity of 5.4 mS cm^?1 at 20 °C for the IL 1‐butyl‐1‐methylpyrrolidinium 5‐cyanotetrazolide [BMPyr][C₂N₅]. On the basis of these results, the synthesized compounds are promising electrolytes for lithium‐ion batteries.     

Ethylene glycol‐based ionic liquids via azide/alkyne click chemistry

A facile synthetic route for the preparation of dicationic ethylene glycol based‐ionic liquids (ILs) via the azide/alkyne “click” reaction is presented. The copper(I) catalyzed, microwave‐assisted azide/alkyne “click” reaction between diazido‐ethylene glycols and the corresponding alkyne containing IL‐head group enables a simple preparation of different sets of poly(ethylene glycol)‐based ILs. Beside tetra‐ and hexa(ethylene glycol)‐based ILs, also oligomeric (M_n = 400 g/mol) and polymeric ILs (M_n up to 1550 g/mol) could be prepared in good yield and with full conversion of the ionic head group. The prepared ILs were extensively characterized via NMR spectroscopy and ESI‐time‐of‐flight (TOF) mass spectroscopy, revealing the formation of multiply charged ions in the negative mode. Thermal stability proved to be exceptionally high (up to 300 °C) together with low glass‐transition temperatures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and Properties of Azide‐Functionalized Ionic Liquids as Attractive Hypergolic Fuels

Hypergolic ionic liquids (ILs) have shown a great promise as viable replacements for toxic and volatile hydrazine derivatives used as propellant fuels, and hence, have attracted increasing interest over the last decade. To take advantage of the reactivity and high energy density of the azido group, a family of low‐cost and easily prepared azide‐functionalized cation‐based ILs, including fuel‐rich anions, such as nitrate, dicyanamide, and nitrocyanamide anions, were synthesized and characterized. All the dicyanamide‐ and nitrocyanamide‐based ILs exhibited spontaneous combustion upon contact with 100 % HNO₃. The densities of these hypergolic ILs varied in the range 1.11–1.29 g cm^?3, and the density‐specific impulse, predicted based on Gaussian 09 calculations, was between 289.9 and 344.9 s g cm^?3. The values of these two key physical properties are much higher than those of unsymmetrical dimethylhydrazine (UDMH). Among the studied compounds, compound IL‐3b, that is, 1‐(2‐azidoethyl)‐1‐methylpyrrolidin‐1‐ium dicyanamide, shows excellent integrated properties including the lowest viscosity (30.9 M Pa s), wide liquid operating range (?70 to 205 °C), shortest ignition‐delay time (7 ms) with 100 % HNO₃, and superior density specific impulse (302.5 s g cm^?3), suggesting promising applications with potential as bipropellant formulations.     

Synthesis,Structure, and Physico‐optical Properties of Manganate(II)‐Based Ionic Liquids

Several ionic liquids (ILs) based on complex manganate(II) anions with chloro, bromo, and bis(trifluoromethanesulfonyl)amido (Tf₂N) ligands have been synthesized. As counterions, n‐alkyl‐methylimidazolium (C_nmim) cations of different chain length (alkyl=ethyl (C₂), propyl (C₃), butyl (C₄), hexyl (C₆)) were chosen. Except for the 1‐hexyl‐3‐methylimidazolium ILs, all of the prepared compounds could be obtained in a crystalline state at room temperature. However, each of the compounds displayed a strong tendency to form a supercooled liquid. Generally, solidification via a glass transition took place below ?40 °C. Consequently, all of these compounds can be regarded as ionic liquids. Depending on the local coordination environment of Mn²⁺, green (tetrahedrally coordinated Mn²⁺) or red (octahedrally coordinated Mn²⁺) luminescence emission from the ⁴T(G) level is observed. 1 The local coordination of the luminescent Mn²⁺ centre has been unequivocally established by UV/Vis as well as Raman and IR vibrational spectroscopies. Emission decay times measured at room temperature in the solid state (crystalline or powder) were generally a few ms, although, depending on the ligand, values of up to 25 ms were obtained. For the bromo compounds, the luminescence decay times proved to be almost independent of the physical state and the temperature. However, for the chloro‐ and bis(trifluoromethanesulfonyl)amido ILs, the emission decay times were found to be dependent on the temperature even in the solid state, indicating that the measured values are strongly influenced by nuclear motion and the vibration of the atoms. In the liquid state, the luminescence of tetrahedrally coordinated Mn²⁺ could only be observed when the tetrachloromanganate ILs were diluted with the respective halide ILs. However, for [C₃mim][Mn(Tf₂N)₃], in which Mn²⁺ is in an octahedral coordination environment, a weak red emission from the pure compound was found even in the liquid state at elevated temperatures.     

Synthesis of Cyclic Carbonate Catalyzed by DBU Derived Basic Ionic Liquids

In this work, 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU), 1,5‐diazabicyclo[4.3.0]‐5‐nonene (DBN), and imidazole (MIM)‐derived bromide ionic liquids (ILs) were synthesized and used to catalyze the cycloaddition reactions of carbon dioxide (CO₂) with several kinds of epoxides to form cyclic carbonates. The DBU derived bromide ionic liquid system was found to have the best catalytic activity among all the tested ILs. The influences of reaction conditions (including temperature, pressure and reaction time) on the reaction of CO₂ to propylene oxide (PO) were studied to show the best conditions of 120 °C, 1 MPa, 2.5 h catalyzed by 2 mol% DBU‐derived bromide ionic liquid, with the conversion of PO and the selectivity of propylene carbonate (PC) reaching 99% and 99%, respectively. Under the optimum reaction conditions, the ionic liquid system could be reused at least five times without decrease in selectivity and conversion. NMR spectroscopy and DFT calculations were used to reveal the hydrogen‐bond interaction between ionic liquids and reagent, based on which the reaction mechanism was proposed.     

Nitration of Simple Aromatics with NO2 under Air Atmosphere in the Presence of Novel Brønsted Acidic Ionic Liquids

Abstract

Aromatics nitrate with NO₂/air catalyzed by novel Brønsted acidic ionic liquids (ILs) without any volatile chlorinated organic solvent under mild conditions. The ILs employed were caprolactam based, [Caprolactam]X (X^?=pTSO^?, BSO^?, BF₄ ^?, NO₃ ^?), which are of relatively lower cost and lower toxicity than traditional imidazolium‐based ILs. The nitration reactions were carried out at ?15 to ?0°C first, then at room temperature for a longer time with a little excessive NO₂ (ca. 1.4 eqv.) for moderate yield (for toluene). The IL could be reused four times.     

Atom transfer radical polymerization of styrenic ionic liquid monomers and carbon dioxide absorption of the polymerized ionic liquids

Polymeric forms of ionic liquids have many potential applications because of their high thermal stability and ionic nature. Two ionic liquid monomers, 1‐(4‐vinylbenzyl)‐3‐butyl imidazolium tetrafluoroborate (VBIT) and 1‐(4‐vinylbenzyl)‐3‐ butyl imidazolium hexafluorophosphate (VBIH), were synthesized through the quaternization of N‐butylimidazole with 4‐vinylbenzylchloride and a subsequent anion‐ exchange reaction with sodium tetrafluoroborate or potassium hexafluorophosphate. Copper‐mediated atom transfer radical polymerization was used to polymerize VBIT and VBIH. The effects of various initiator/catalyst systems, monomer concentrations, solvent polarities, and reaction temperatures on the polymerization were examined. The polymerization was well controlled and exhibited living characteristics when CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine or CuBr/2,2′‐bipyridine was used as the catalyst and ethyl 2‐bromoisobutyrate was used as the initiator. Characterizations by thermogravimetric analysis, differential scanning calorimetry, and X‐ray diffraction showed that the resulting VBIT polymer, poly[1‐(4‐vinylbenzyl)‐3‐butyl imidazolium tetrafluoroborate] (PVBIT), was amorphous and had excellent thermal stability, with a glass‐transition temperature of 84 °C. The polymerized ionic liquids could absorb CO₂ as ionic liquids: PVBIT absorbed 0.30% (w/w) CO₂ at room temperature and 0.78 atm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1432–1443, 2005     

含氰基基团的以C为中心的不对称阴离子离子液体的合成、表征及应用

首次通过不对称阴离子的钠盐/钾盐和不同的季胺化的咪唑,吡咯溴盐/氯盐进行离子交换,合成了一系列含氰基官能团的不对称阴离子功能化离子液体。通过红外、核磁共振、质谱和元素分析对离子液体的结构进行表征;通过TGA对离子液体的热稳定性进行测定,结果发现不对称功能化离子液体具有良好的热稳定性,其分解温度在219-319℃范围内。将功能化离子液体[Bmim][C(CN)2COCH3]作为弱配体应用于模型的Suzuki偶联反应,发现在反应中加入功能化离子液体[Bmim][C(CN)2COCH3]可以使反应收率提高10-15%。     

Effect of solvated ionic liquids on the ion conducting property of composite membranes for lithium ion batteries

We prepared the polyethylene oxide (PEO)-based composite membrane electrolytes which contained the specialized ionic liquids and the inorganic filler of Li₇La₃Zr₂O₁₂ (LLZO). Mixtures of ionic liquids and tetragonal inorganic fillers were used as additives to prepare composite electrolytes for an application of all solid-state lithium ion batteries (ASLBs). In order to improve the ionic conductivity of composite membranes, we studied the structural change and the electrochemical behaviors as a function of the amounts of solvated ionic liquids (ILs). The addition effect of solvated ILs showed the higher ionic conductivity such as 10^?4 S/cm at 55 °C by reducing the crystalline character of polymer based composite, resulting in the enhanced ion conducting property. The hybrid composite membranes were successfully made in flexible form, and have an excellent thermal and electrochemical stability. Finally, the electrochemical performance of the half-cell was evaluated, and it was confirmed that the ion-conducting characteristics were influenced and controlled by the effect of ILs.     

以N为中心的阴离子离子液体的合成、表征及应用

首次通过不同阴离子的钾盐和不同的季铵化的咪唑,吡咯溴盐/氯盐进行离子交换,合成了一系列含氰基官能团的阴离子功能化离子液体。通过红外、核磁共振、质谱对离子液体的结构进行表征;通过TGA对离子液体的热稳定性进行测定,结果发现功能化离子液体具有良好的热稳定性,其分解温度在224-289℃范围内。将功能化离子液体[EMIm][N(CN)COC2H5]作为配体应用于无膦配体的Suzuki偶联反应,发现在反应中加入功能化离子液体[EMIm][N(CN)COC2H5]可以使反应收率提高10-20%。     

离子液体存在下脂肪醛的环化三聚反应

Aliphatic aldehydes such as ethanal,propanal,n-butanal,isobutyraldehyde,n-valeraldehyde,isovaleraldehyde,n-hexanal and n-octanal were converted into the corresponding 2,4,6-trialkyl-1,3,5-trioxanes through cyclotrimer-ization in the presence of the ferric chloride based ionic liquids at room temperature without solvent in high selec-tivity.The effects of different ionic liquids,acidity of ionic liquids and temperature on cyclotrimerization were alsostudied.The results showed that the ferric chloride based ionic liquids(apparent molar fraction of FeCl_3(x(FeCl_3)=0.62))were a kind of efficient catalysts for the cyclotrimerization of aliphatic aldehyde which could be separatedconveniently from the reaction mixture and recycled without loss of catalytic activity.The conversion of isobu-tyraldehyde and the selectivity to 2,4,6-triisopropyl-1,3,5-trioxane were 91.1% and 99.8% respectively under opti-mum reaction condition(isobutyraldehyde 25.0 g,[Et_3NH]Cl/FeCl_3(x(FeCl_3)=0.62)1.0 g,25 ℃for 1 h).     

Imidazolium 2‐Substituted 4,5‐Dicyanoimidazolate Ionic Liquids: Synthesis,Crystal Structures and Structure–Thermal Property Relationships

Thirty six novel ionic liquids (ILs) with 1‐butyl‐3‐methylimidazolium and 3‐methyl‐1‐octylimidazolium cations paired with 2‐substitited 4,5‐dicyanoimidazolate anions (substituent at C2=chloro, bromo, methoxy, vinyl, amino, methyl, ethyl, propyl, isopropyl, butyl, pentyl, hexyl, heptyl, octyl, nonyl, decyl, undecyl and phenyl) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and single‐crystal X‐ray crystallography. The effects of cation and anion type and structure on the thermal properties of the resulting ionic liquids, including several room temperature ionic liquids (RTILs) are examined and discussed. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of ?22 to ?68 °C. The effects of alkyl substituents of the imidazolate anion reflected the crystallization, melting points and thermal decomposition of the ILs. The Coulombic packing force, van der Waals forces and size of the anions can be considered for altering the thermal transitions. Three crystal structures of the ILs were determined and the effects of changes to the cations and anions on the packing of the structure were investigated.     

Synthesis and Improved Properties of Hypergolic Boronium‐Based Ionic Liquids

A series of asymmetric monoimidazolium dihydroboronium‐based ionic liquids (ILs) were synthesized from amine‐boranes. All the resulting ILs were fully characterized by ¹H and ¹³C NMR, IR spectroscopy, elemental analysis or high resolution mass spectrum. Compared with the symmetric bisimidazolium dihydroboronium‐based ILs, these new ILs exhibited improved properties with shorter ignition delay times (IDs), higher densities, and lower phase transition temperature showing the promising application potential as green propellants.     

Exploring Sustainable Rocket Fuels: [Imidazolyl−Amine−BH2]+‐Cation‐Based Ionic Liquids as Replacements for Toxic Hydrazine Derivatives

The application of hypergolic ionic liquids as propellant fuels is a newly emerging area in the fields of chemistry and propulsion science. Herein, a new class of [imidazolyl?amine?BH₂]⁺‐cation‐based ionic liquids, which included fuel‐rich anions, such as dicyanamide (N(CN)₂^?) and cyanoborohydride (BH₃CN^?) anions, were synthesized and characterized. As expected, all of the ionic liquids exhibited spontaneous combustion upon contact with the oxidizer 100 % HNO₃. The densities of these ionic liquids varied from 0.99–1.12 g cm^?3, and the heats of formation, predicted based on Gaussian 09 calculations, were between ?707.7 and 241.8 kJ mol^?1. Among them, the salt of compound 5 , that is, (1‐allyl‐1H‐imidazole‐3‐yl)?(trimethylamine)?dihydroboronium dicyanamide, exhibited the lowest viscosity (168 MPa s), good thermal properties (T_gT_d>130 °C), and the shortest ignition‐delay time (18 ms) with 100 % HNO₃. These ionic fuels, as “green” replacements for toxic hydrazine‐derivatives, may have potential applications as bipropellant formulations.     

Novel Cyclic Sulfonium‐Based Ionic Liquids: Synthesis,Characterization, and Physicochemical Properties

A new series of ionic liquids composed of three cyclic sulfonium cations and four anions has been synthesized and characterized. Their physicochemical properties, including their spectroscopic characteristics, ion cluster behavior, surface properties, phase transitions, thermal stability, density, viscosity, refractive index, tribological properties, ion conductivity, and electrochemical window have been comprehensively studied. Eight of these salts are liquids at room temperature, at which some salts based on [NO₃]^? and [NTf₂]^? ions exhibit organic plastic crystal behaviors, and all the saccharin‐based salts display relatively high refractive indices (1.442–1.594). In addition, some ionic liquids with the [NTf₂]^? ion exhibit peculiar spectroscopic characteristics in FTIR and UV/Vis regions, whilst those salts based on the [DCA]^? ion show lower viscosities (34.2–62.6 mPa s at 20 °C) and much higher conductivities (7.6–17.6 mS cm^?1 at 20 °C) than most traditional 1,3‐dialkylimidazolium salts.     

Polyoxometalate Ionic Liquids as Self‐Repairing Acid‐Resistant Corrosion Protection

Corrosion is a global problem for any metallic structure or material. Herein we show how metals can easily be protected against acid corrosion using hydrophobic polyoxometalate‐based ionic liquids (POM‐ILs). Copper metal disks were coated with room‐temperature POM‐ILs composed of transition‐metal functionalized Keggin anions [SiW₁₁O₃₉TM(H₂O)]^n? (TM=Cu^II, Fe^III) and quaternary alkylammonium cations (C_nH_{2 n+1})₄N⁺ (n=7–8). The corrosion resistance against acetic acid vapors and simulated “acid rain” was significantly improved compared with commercial ionic liquids or solid polyoxometalate coatings. Mechanical damage to the POM‐IL coating is self‐repaired in less than one minute with full retention of the acid protection properties. The coating can easily be removed and recovered by rinsing with organic solvents.     

Size Matters! On the Way to Ionic Liquid Systems without Ion Pairing

Several, partly new, ionic liquids (ILs) containing imidazolium and ammonium cations as well as the medium‐sized [NTf₂]^? (0.230 nm³; Tf=CF₃SO₃^?) and the large [Al(hfip)₄]^? (0.581 nm³; hfip=OC(H)(CF₃)₂) anions were synthesized and characterized. Their temperature‐dependent viscosities and conductivities between 25 and 80 °C showed typical Vogel–Fulcher–Tammann (VFT) behavior. Ion‐specific self‐diffusion constants were measured at room temperature by pulsed‐gradient stimulated‐echo (PGSTE) NMR experiments. In general, self‐diffusion constants of both cations and anions in [Al(hfip)₄]^?‐based ILs were higher than in [NTf₂]^?‐based ILs. Ionicities were calculated from self‐diffusion constants and measured bulk conductivities, and showed that [Al(hfip)₄]^?‐based ILs yield higher ionicities than their [NTf₂]^? analogues, the former of which reach values of virtually 100 % in some cases.From these observations it was concluded that [Al(hfip)₄]^?‐based ILs come close to systems without any interactions, and this hypothesis is underlined with a Hirshfeld analysis. Additionally, a robust, modified Marcus theory quantitatively accounted for the differences between the two anions and yielded a minimum of the activation energy for ion movement at an anion diameter of slightly greater than 1 nm, which fits almost perfectly the size of [Al(hfip)₄]^?. Shallow Coulomb potential wells are responsible for the high mobility of ILs with such anions.     

On the Dynamic Interaction of n‐Butane with Imidazolium‐Based Ionic Liquids

The impact of a reactant from the gas phase on the surface of a liquid and its transfer through this gas/liquid interface are crucial for various concepts applying ionic liquids (ILs) in catalysis. We investigated the first step of the adsorption dynamics of n‐butane on a series of 1‐alkyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide ILs ([C_nC₁Im][Tf₂N]; n=1, 2, 3, 8). Using a supersonic molecular beam in ultra‐high vacuum, the trapping of n‐butane on the frozen ILs was determined as a function of surface temperature, between 90 and 125 K. On the C₈‐ and C₃‐ILs, n‐butane adsorbs at 90 K with an initial trapping probability of ≈0.89. The adsorption energy increases with increasing length of the IL alkyl chain, whereas the ionic headgroups seem to interact only weakly with n‐butane. The absence of adsorption on the C₁‐ and C₂‐ILs is attributed to a too short residence time on the IL surface to form nuclei for condensation even at 90 K.     

Elucidating Interactions between DMSO and Chelate‐Based Ionic Liquids

The C?D bond stretching vibrations of deuterated dimethyl sulfoxide ([D₆]DMSO) and the C₂?H bond stretching vibrations of 1,1,1,5,5,5‐hexafluoropentane‐2,4‐dione (hfac) ligand in anion are chosen as probes to elucidate the solvent–solute interaction between chelate‐based ionic liquids (ILs) and DMSO by vibrational spectroscopic studies. The indirect effect from the interaction of the adjacent S=O functional group of DMSO with the cation [C₁₀mim]⁺ and anion [Mn(hfac)₃]^? of the ILs leads to the blue‐shift of the C?D stretching vibrations of DMSO. The C₂?H bond stretching vibrations in hfac ligand is closely related to the ionic hydrogen bond strength between the cation and anion of chelate‐based ILs. EPR studies reveal that the crystal field of the central metal is kept when the chelate‐based ILs are in different microstructure environment in the solution.     

Synthesis and Esterification of 3‐Ferrocenyl Acrylic Acid in Ionic Liquid

3‐Ferrocenyl acrylic acid, synthesized from ferrocenecarboxaldehyde and propandioic acid in water‐insoluble ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate, [BMIM]PF₆) at 85 °C in high yield, was transformed to a series of 3‐ferrocenyl acrylate of alcohols and phenols in water‐soluble ionic liquid (1,3‐dimethylimidazolium dimethylphosphate, [DMIM]Me₂PO₄) at room temperature in the presence of dicyclohexylcarbodiimide (DCC) and 4‐dimethylaminopyridine (DMAP).