Visible‐Light‐Induced Electron Transport from Small to Large Nanoparticles in Bimodal Gold Nanoparticle‐Loaded Titanium(IV) Oxide

A key to realizing the sustainable society is to develop highly active photocatalysts for selective organic synthesis effectively using sunlight as the energy source. Recently, metal‐oxide‐supported gold nanoparticles (NPs) have emerged as a new type of visible‐light photocatalysts driven by the excitation of localized surface plasmon resonance of Au NPs. Here we show that visible‐light irradiation (λ>430 nm) of TiO₂‐supported Au NPs with a bimodal size distribution (BM‐Au/TiO₂) gives rise to the long‐range (>40 nm) electron transport from about 14 small (ca. 2 nm) Au NPs to one large (ca. 9 nm) Au NP through the conduction band of TiO₂. As a result of the enhancement of charge separation, BM‐Au/TiO₂ exhibits a high level of visible‐light activity for the one‐step synthesis of azobenzenes from nitrobenzenes at 25 °C with a yield greater than 95 % and a selectivity greater than 99 %, whereas unimodal Au/TiO₂ (UM‐Au/TiO₂) is photocatalytically inactive.     

Tuning the Surface Structure of Nitrogen‐Doped TiO2 Nanofibres—An Effective Method to Enhance Photocatalytic Activities of Visible‐Light‐Driven Green Synthesis and Degradation

Nitrogen‐doped TiO₂ nanofibres of anatase and TiO₂(B) phases were synthesised by a reaction between titanate nanofibres of a layered structure and gaseous NH₃ at 400–700 °C, following a different mechanism than that for the direct nitrogen doping from TiO₂. The surface of the N‐doped TiO₂ nanofibres can be tuned by facial calcination in air to remove the surface‐bonded N species, whereas the core remains N doped. N‐Doped TiO₂ nanofibres, only after calcination in air, became effective photocatalysts for the decomposition of sulforhodamine B under visible‐light irradiation. The surface‐oxidised surface layer was proven to be very effective for organic molecule adsorption, and the activation of oxygen molecules, whereas the remaining N‐doped interior of the fibres strongly absorbed visible light, resulting in the generation of electrons and holes. The N‐doped nanofibres were also used as supports of gold nanoparticle (Au NP) photocatalysts for visible‐light‐driven hydroamination of phenylacetylene with aniline. Phenylacetylene was activated on the N‐doped surface of the nanofibres and aniline on the Au NPs. The Au NPs adsorbed on N‐doped TiO₂(B) nanofibres exhibited much better conversion (80 % of phenylacetylene) than when adsorbed on undoped fibres (46 %) at 40 °C and 95 % of the product is the desired imine. The surface N species can prevent the adsorption of O₂ that is unfavourable for the hydroamination reaction, and thus, improve the photocatalytic activity. Removal of the surface N species resulted in a sharp decrease of the photocatalytic activity. These photocatalysts are feasible for practical applications, because they can be easily dispersed into solution and separated from a liquid by filtration, sedimentation or centrifugation due to their fibril morphology.     

Visible‐light‐driven self‐cleaning SERS substrate of silver nanoparticles and graphene oxide decorated nitrogen‐doped titania nanotube array

Graphene oxide (GO) and silver nanoparticles (Ag NPs) sequentially decorated nitrogen‐doped titania nanotube array (N‐TiO₂ NTA) had been designed as visible‐light‐driven self‐cleaning surface‐enhanced Raman scattering (SERS) substrate for a recyclable SERS detection application. N‐TiO₂ NTA was fabricated by anodic oxidation and then doping nitrogen treatment in ammonia atmosphere, acting as a visible‐light‐driven photocatalyst and supporting substrate. Ag/GO/N‐TiO₂ NTA was prepared by decorating GO monolayer through an impregnation process and then depositing Ag NPs through a polyol process on the surface of N‐TiO₂ NTA, acting as the collection of organic molecule and Raman enhancement. The SERS activity of Ag/GO/N‐TiO₂ NTA was evaluated using methyl blue as an organic probe molecule, revealing the analytical enhancement factor of 4.54 × 10⁴. Ag/GO/N‐TiO₂ NTA was applied as active SERS substrate to determine a low‐affinity organic pollutant of bisphenol A, revealing the detection limit of as low as 5 × 10^?7 m . Ag/GO/N‐TiO₂ NTA could also achieve self‐cleaning function for a recycling utilization through visible‐light‐driven photocatalytic degradation of the adsorbed organic molecules. Ag/GO/N‐TiO₂ NTA has been successfully reused for five times without an obvious decay in accuracy and sensitivity for organic molecule detection. The unique properties of this SERS substrate enable it to have a promising application for the sensitive and recyclable SERS detection of low‐affinity organic molecules. Copyright © 2016 John Wiley & Sons, Ltd.     

Constructing Ordered Three‐Dimensional TiO2 Channels for Enhanced Visible‐Light Photocatalytic Performance in CO2 Conversion Induced by Au Nanoparticles

As a typical photocatalyst for CO₂ reduction, practical applications of TiO₂ still suffer from low photocatalytic efficiency and limited visible‐light absorption. Herein, a novel Au‐nanoparticle (NP)‐decorated ordered mesoporous TiO₂ (OMT) composite (OMT‐Au) was successfully fabricated, in which Au NPs were uniformly dispersed on the OMT. Due to the surface plasmon resonance (SPR) effect derived from the excited Au NPs, the TiO₂ shows high photocatalytic performance for CO₂ reduction under visible light. The ordered mesoporous TiO₂ exhibits superior material and structure, with a high surface area that offers more catalytically active sites. More importantly, the three‐dimensional transport channels ensure the smooth flow of gas molecules, highly efficient CO₂ adsorption, and the fast and steady transmission of hot electrons excited from the Au NPs, which lead to a further improvement in the photocatalytic performance. These results highlight the possibility of improving the photocatalysis for CO₂ reduction under visible light by constructing OMT‐based Au‐SPR‐induced photocatalysts.     

Size‐Dependence of the Activity of Gold Nanoparticle‐Loaded Titanium(IV) Oxide Plasmonic Photocatalyst for Water Oxidation

Mesoporous TiO₂ nanocrystalline film was formed on fluorine‐doped tin oxide electrode (TiO₂/FTO) and gold nanoparticles (NPs) of different sizes were loaded onto the surface with the loading amount kept constant (Au/TiO₂/FTO). Visible‐light irradiation (λ>430 nm) of the Au/TiO₂/FTO photoanode in a photoelectrochemical cell with the structure of photoanode|0.1 m NaClO4 aqueous solution|Ag/AgCl (reference electrode)|glassy carbon (cathode) leads to the oxidation of water to oxygen (O₂). We show that the visible‐light activity of the Au/TiO₂/FTO anode increases with a decrease in Au particle size (d) at 2.9≤d≤11.9 nm due to the enhancement of the charge separation and increasing photoelectrocatalytic activity.     

TiO2 Nanotube Arrays Modified with Cr‐Doped SrTiO3 Nanocubes for Highly Efficient Hydrogen Evolution under Visible Light

In recent decades, solar‐driven hydrogen production over semiconductors has attracted tremendous interest owing to the global energy and environmental crisis. Among various semiconductor materials, TiO₂ exhibits outstanding photocatalytic properties and has been extensively applied in diverse photocatalytic and photoelectric systems. However, two major drawbacks limit practical applications, namely, high charge‐recombination rate and poor visible‐light utilization. In this work, heterostructured TiO₂ nanotube arrays grafted with Cr‐doped SrTiO₃ nanocubes were fabricated by simply controlling the kinetics of hydrothermal reactions. It was found that coupling TiO₂ nanotube arrays with regular SrTiO₃ nanocubes can significantly improve the charge separation. Meanwhile, doping Cr cations into SrTiO₃ nanocubes proved to be an effective and feasible approach to enhance remarkably the visible‐light response, which was also confirmed by theoretical calculations. As a result, the rate of photoelectrochemical hydrogen evolution of these novel heteronanostructures is an order of magnitude larger than those of TiO₂ nanotube arrays and other previously reported SrTiO₃/TiO₂ nanocomposites under visible‐light irradiation. Furthermore, the as‐prepared Cr‐doped SrTiO₃/TiO₂ heterostructures exhibit excellent durability and stability, which are favorable for practical hydrogen production and photoelectric nanodevices.     

Prolonged Hot Electron Dynamics in Plasmonic‐Metal/Semiconductor Heterostructures with Implications for Solar Photocatalysis

Ideal solar‐to‐fuel photocatalysts must effectively harvest sunlight to generate significant quantities of long‐lived charge carriers necessary for chemical reactions. Here we demonstrate the merits of augmenting traditional photoelectrochemical cells with plasmonic nanoparticles to satisfy these daunting photocatalytic requirements. Electrochemical techniques were employed to elucidate the mechanics of plasmon‐mediated electron transfer within Au/TiO₂ heterostructures under visible‐light (λ>515 nm) irradiation in solution. Significantly, we discovered that these transferred electrons displayed excited‐state lifetimes two orders of magnitude longer than those of electrons photogenerated directly within TiO₂ via UV excitation. These long‐lived electrons further enable visible‐light‐driven H₂ evolution from water, heralding a new photocatalytic paradigm for solar energy conversion.     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

The Visible‐Light Photocatalytic Activity and Antibacterial Performance of Ag/AgBr/TiO2 Immobilized on Activated Carbon

Visible‐light‐driven Ag/AgBr/TiO₂/activated carbon (AC) composite was prepared by solgel method coupled with photoreduction method. For comparison, TiO₂, TiO₂/AC, and Ag/AgBr/TiO₂ were also synthesized. Their characteristics were analyzed by XRD, SEM‐EDS, TG‐DSC and UV–vis techniques. Photocatalytic activity and antibacterial performance under visible‐light irradiation were investigated by ICP‐AES, ATR‐FT‐IR and spectrophotometry methods using methylene blue and Escherichia coli as target systems, respectively. The results showed that Ag/AgBr was successfully deposited on anatase TiO₂/AC surface, and exhibited a distinct light absorption in the visible region. Ag/AgBr/TiO₂/AC displayed excellent antibacterial performance both in dark and under visible‐light illumination. The growth of E. coli cell was inhibited in the presence of Ag/AgBr/TiO₂/AC in dark. Moreover, upon visible‐light illumination, a significant damage of cell membrane was noticed. Ag/AgBr/TiO₂/AC was also shown higher photocatalytic efficiency for methylene blue degradation than those of TiO₂, TiO₂/AC, and Ag/AgBr/TiO₂. This is attributed to the synergetic effect between AC and Ag/AgBr/TiO₂, of which AC acts as the role of increasing reaction areas, continuous enriching, and transferring the adsorbed MB molecules to the surface of supported photocatalysts, and the Ag/AgBr/TiO₂ acts as a highly active photocatalyst for degrading MB molecules under visible‐light irradiation.     

Gold‐Nanoparticle‐Loaded Carbonate‐Modified Titanium(IV) Oxide Surface: Visible‐Light‐Driven Formation of Hydrogen Peroxide from Oxygen

Gold nanoparticle‐loaded rutile TiO₂ with a bimodal size distribution around 10.6 nm and 2.3 nm (BM‐Au/TiO₂) was prepared by the deposition precipitation and chemical reduction (DP‐CR) technique. Visible‐light irradiation (λ>430 nm) of the BM‐Au/TiO₂ plasmonic photocatalyst yields 35 μm H₂O₂ in aerated pure water at irradiation time (t_p)=1 h, and the H₂O₂ concentration increases to 640±60 μm by the addition of 4 % HCOOH as a sacrificing electron donor. Further, a carbonate‐modified surface BM‐Au/TiO₂ (BM‐Au/TiO₂‐CO₃^2?) generates a millimolar level of H₂O₂ at t_p=1 h with a quantum efficiency (Φ) of 5.4 % at λ=530 nm under the same conditions. The recycle experiments confirmed the stable performance of BM‐Au/TiO₂.     

Promoted Fixation of Molecular Nitrogen with Surface Oxygen Vacancies on Plasmon‐Enhanced TiO2 Photoelectrodes

A hundred years on, the energy‐intensive Haber–Bosch process continues to turn the N₂ in air into fertilizer, nourishing billions of people while causing pollution and greenhouse gas emissions. The urgency of mitigating climate change motivates society to progress toward a more sustainable method for fixing N₂ that is based on clean energy. Surface oxygen vacancies (surface O_vac) hold great potential for N₂ adsorption and activation, but introducing O_vac on the very surface without affecting bulk properties remains a great challenge. Fine tuning of the surface O_vac by atomic layer deposition is described, forming a thin amorphous TiO₂ layer on plasmon‐enhanced rutile TiO₂/Au nanorods. Surface O_vac in the outer amorphous TiO₂ thin layer promote the adsorption and activation of N₂, which facilitates N₂ reduction to ammonia by excited electrons from ultraviolet‐light‐driven TiO₂ and visible‐light‐driven Au surface plasmons. The findings offer a new approach to N₂ photofixation under ambient conditions (that is, room temperature and atmospheric pressure).     

Surface Plasmon Resonance‐Enhanced Visible‐NIR‐Driven Photocatalytic and Photothermal Catalytic Performance by Ag/Mesoporous Black TiO2 Nanotube Heterojunctions

Ag/mesoporous black TiO₂ nanotubes heterojunctions (Ag‐MBTHs) were fabricated through a surface hydrogenation, wet‐impregnation and photoreduction strategy. The as‐prepared Ag‐MBTHs possess a relatively high specific surface area of ≈85 m² g^?1 and an average pore size of ≈13.2 nm. The Ag‐MBTHs with a narrow band gap of ≈2.63 eV extend the photoresponse from UV to the visible‐light and near‐infrared (NIR) region. They exhibit excellent visible‐NIR‐driven photothermal catalytic and photocatalytic performance for complete conversion of nitro aromatic compounds (100 %) and mineralization of highly toxic phenol (100 %). The enhancement can be attributed to the mesoporous hollow structures increasing the light multi‐refraction, the Ti³⁺ in frameworks and the surface plasmon resonance (SPR) effect of plasmonic Ag nanoparticles favoring light‐harvesting and spatial separation of photogenerated electron–hole pairs, which is confirmed by transient fluorescence. The fabrication of this SPR‐enhanced visible‐NIR‐driven Ag‐MBTHs catalyst may provide new insights for designing other high‐performance heterojunctions as photocatalytic and photothermal catalytic nanomaterials.     

Mesoporous Au/TiO2 Nanocomposite Microspheres for Visible‐Light Photocatalysis

Mesoporous Au/TiO₂ nanocomposite microspheres have been synthesized by using a microemulsion‐based bottom‐up self‐assembly (EBS) process starting from monodisperse gold and titania nanocrystals as building blocks. The microspheres had large surface areas (above 270 m² g^?1) and open mesopores (about 5 nm), which led to the adsorption‐driven concentration of organic molecules in the vicinity of the microspheres. Au nanoparticles, which were stably confined within the microspheres, enhanced the absorption over the broad UV/Vis/NIR spectroscopic range, owing to their strong surface plasmon resonance (SPR); as a result, the Au nanoparticles promoted the visible‐light photo‐induced degradation of organic compounds.     

A Simple Method for the Preparation of TiO2/Ag‐AgCl@Polypyrrole Composite and Its Enhanced Visible‐Light Photocatalytic Activity

A novel and facile method was developed to prepare a visible‐light driven TiO₂/Ag‐AgCl@polypyrrole (PPy) photocatalyst with Ag‐AgCl nanoparticles supported on TiO₂ nanofibers and covered by a thin PPy shell. During the synthesis, the PPy shell and Ag‐AgCl nanoparticles were prepared simultaneously onto TiO₂ nanofibers, which simplified the preparation procedure. In addition, because Ag‐AgCl aggregates were fabricated via partly etching the Ag nanoparticles, their size was well controlled at the nanoscale, which was beneficial for improvement of the contact surface area. Compared with reference photocatalysts, the TiO₂/Ag‐AgCl@PPy composite exhibited an enhanced photodegradation activity towards rhodamine B under visible‐light irradiation. The superior photocatalytic property originated from synergistic effects between TiO₂ nanofibers, Ag‐AgCl nanoparticles and the PPy shell. Furthermore, the TiO₂/Ag‐AgCl@PPy composite could be easily separated and recycled without obvious reduction in activity.     

Fullerol–Titania Charge‐Transfer‐Mediated Photocatalysis Working under Visible Light

The development of visible‐light‐active photocatalysts is being investigated through various approaches. In this study, C₆₀‐based sensitized photocatalysis that works through the charge transfer (CT) mechanism is proposed and tested as a new approach. By employing the water‐soluble fullerol (C₆₀(OH)_x) instead of C₆₀, we demonstrate that the adsorbed fullerol activates TiO₂ under visible‐light irradiation through the “surface–complex CT” mechanism, which is largely absent in the C₆₀/TiO₂ system. Although fullerene and its derivatives have often been utilized in TiO₂‐based photochemical conversion systems as an electron transfer relay, their successful photocatalytic application as a visible‐light sensitizer of TiO₂ is not well established. Fullerol/TiO₂ exhibits marked visible photocatalytic activity not only for the redox conversion of 4‐chlorophenol, I^?, and Cr^VI, but also for H₂ production. The photoelectrode of fullerol/TiO₂ also generates an enhanced anodic photocurrent under visible light as compared with the electrodes of bare TiO₂ and C₆₀/TiO₂, which confirms that the visible‐light‐induced electron transfer from fullerol to TiO₂ is particularly enhanced. The surface complexation of fullerol/TiO₂ induced a visible absorption band around 400–500 nm, which was extinguished when the adsorption of fullerol was inhibited by fluorination of the surface of TiO₂. The transient absorption spectroscopic measurement gave an absorption spectrum ascribed to fullerol radical cations (fullerol^.+) the generation of which should be accompanied by the proposed CT. The theoretical calculation regarding the absorption spectra for the (TiO₂ cluster+fullerol) model also confirmed the proposed CT, which involves excitation from HOMO (fullerol) to LUMO (TiO₂ cluster) as the origin of the visible‐light absorption.     

Visible‐Light‐Triggered Drug Release from TiO2 Nanotube Arrays: A Controllable Antibacterial Platform

In this work, we use a double‐layered stack of TiO₂ nanotubes (TiNTs) to construct a visible‐light‐triggered drug delivery system. The key for visible light drug release is a hydrophobic cap on the nanotubes containing Au nanoparticles (AuNPs). The AuNPs allow for a photocatalytic scission of the hydrophobic chain under visible light. To demonstrate this principle, we loaded ampicillin (AMP) into the lower part of the TiO₂ nanotube stack, triggered visible‐light‐induced release, and carried out antibacterial studies. The release from the platform becomes most controllable if the drug is silane‐grafted in the hydrophilic bottom layer for drug storage. Thus, visible light photocatalysis can also determine the release kinetics of the active drug from the nanotube wall.     

Plasmon‐Resonance‐Based Generation of Cathodic Photocurrent at Electrodeposited Gold Nanoparticles Coated with TiO2 Films

Reversed photoresponse: Indium tin oxide (ITO)/Au nanoparticle (NP)/TiO₂ electrodes (see picture) exhibit cathodic photocurrents and positive photopotentials under visible light, whereas ITO/TiO₂/Au NP electrodes show an inverted response. This behavior indicates that electron transfer occurs from the plasmon‐excited Au NPs to the TiO₂ film. An enhanced O₂ photoreduction activity is found for ITO/Au NP/TiO₂/Pt electrodes.

     

Synthesis and Study of Plasmon‐Induced Carrier Behavior at Ag/TiO2 Nanowires

Nanocomposites of Ag/TiO₂ nanowires with enhanced photoelectrochemical performance have been prepared by a facile solvothermal synthesis of TiO₂ nanowires and subsequent photoreduction of Ag⁺ ions to Ag nanoparticles (AgNPs) on the TiO₂ nanowires. The as‐prepared nanocomposites exhibited significantly improved cathodic photocurrent responses under visible‐light illumination, which is attributed to the local electric field enhancement of plasmon resonance effect near the TiO₂ surface rather than by the direct transfer of charge between the two materials. The visible‐light‐driven photocatalytic performance of these nanocomposites in the degradation of methylene blue dye was also studied, and the observed improvement in photocatalytic activity is associated with the extended light absorption range and efficient charge separation due to surface plasmon resonance effect of AgNPs.     

Highly Efficient Low‐Temperature Plasma‐Assisted Modification of TiO2 Nanosheets with Exposed {001} Facets for Enhanced Visible‐Light Photocatalytic Activity

Anatase TiO₂ nanosheets with exposed {001} facets have been controllably modified under non‐thermal dielectric barrier discharge (DBD) plasma with various working gas, including Ar, H₂, and NH₃. The obtained TiO₂ nanosheets possess a unique crystalline core/amorphous shell structure (TiO₂@TiO_2?x), which exhibit the improved visible and near‐infrared light absorption. The types of dopants (oxygen vacancy/surface Ti³⁺/substituted N) in oxygen‐deficient TiO₂ can be tuned by controlling the working gases during plasma discharge. Both surface Ti³⁺ and substituted N were doped into the lattice of TiO₂ through NH₃ plasma discharge, whereas the oxygen vacancy or Ti³⁺ (along with the oxygen vacancy) was obtained after Ar or H₂ plasma treatment. The TiO₂@TiO_2?x from NH₃ plasma with a green color shows the highest photocatalytic activity under visible‐light irradiation compared with the products from Ar plasma or H₂ plasma due to the synergistic effect of reduction and simultaneous nitridation in the NH₃ plasma.