Copper Versus Thioether‐Centered Oxidation: Mechanistic Insights into the Non‐Innocent Redox Behavior of Tripodal Benzimidazolylaminothioether Ligands

A series of Cu⁺ complexes with ligands that feature varying numbers of benzimidazole/thioether donors and methylene or ethylene linkers between the central nitrogen atom and the thioether sulfur atoms have been spectroscopically and electrochemically characterized. Cyclic voltammetry measurements indicated that the highest Cu²⁺/Cu⁺ redox potentials correspond to sulfur‐rich coordination environments, with values decreasing as the thioether donors are replaced by nitrogen‐donating benzimidazoles. Both Cu²⁺ and Cu⁺ complexes were studied by DFT. Their electronic properties were determined by analyzing their frontier orbitals, relative energies, and the contributions to the orbitals involved in redox processes, which revealed that the HOMOs of the more sulfur‐rich copper complexes, particularly those with methylene linkers (? N? CH₂? S? ), show significant aromatic thioether character. Thus, the theoretically predicted initial oxidation at the sulfur atom of the methylene‐bridged ligands agrees with the experimentally determined oxidation waves in the voltammograms of the NS₃‐ and N₂S₂‐type ligands as being ligand‐based, as opposed to the copper‐based processes of the ethylene‐bridged Cu⁺ complexes. The electrochemical and theoretical results are consistent with our previously reported mechanistic proposal for Cu²⁺‐promoted oxidative C? S bond cleavage, which in this work resulted in the isolation and complete characterization (including by X‐ray crystallography) of the decomposition products of two ligands employed, further supporting the novel reactivity pathway invoked. The combined results raise the possibility that the reactions of copper–thioether complexes in chemical and biochemical systems occur with redox participation of the sulfur atom.     

First Example of Schiff Bases Containing Poly(Acryl Amid) in the Synthesis and Characterization

A novel polymeric‐Schiff base derived from the condensation reaction poly(acryl amid) and indole‐3‐carboxaldehyde has been synthesized and their Co(II) and Ni(II) complexes have been prepared. Mol ratio of acrylamid group and Schiff bases group was estimated by means of height of ‐CH multiple peaks and –CH=N‐ peak in ¹H‐NMR spectrum. The studied substances were characterized by molar conductance, magnetic susceptibility, electronic and IR spectral studies. In addition, main units have been suggested with elemental analysis for these substances, and than the weight average molecular weight (M_w) has been suggested. The number average molecular weight (M_n) was determined with a vapor pressure osmometer. Polydispersity index (PDI) found to be ca 1.7 from M_w/M_n for poly‐Schiff bases and their Co(II) and Ni(II) complexes. PAA‐Schiff bases were found to have the highest thermal stablility compared to that of the Co(II) and Ni(II) complexes. The conductivities of the PAA‐Schiff bases and their complexes were measured by the four‐probe technique and were found in the range 10^?5?10^?6 S cm^?1.     

Synthesis and characterization of biologically active new Schiff bases containing 3‐functionalized 1,2,4‐triazoles and their zinc(II) complexes: crystal structure of 4‐bromo‐2‐[(E)‐(1H‐1,2,4‐triazol‐3‐ylimino)‐ methyl]phenol

Biologically active triazole Schiff bases ( L ¹  L ³ ) derived from the reaction of 3‐amino‐1,2,4‐triazole with chloro‐, bromo‐ and nitro‐ substituted salicylaldehydes and their Zn(II) complexes (1–3) have been synthesized and characterized by their physical, spectral and analytical data. Triazole Schiff bases potentially act as tridentate ligands and coordinate with the Zn(II) metal atom through salicylidene‐O, azomethine‐N and triazole‐N. The complexes have the general formula [M(L‐H)₂], where M = zinc(II) and L = ( L ¹ – L ³ ), and observe an octahedral geometry. The Schiff bases and their Zn(II) complexes have been screened for in‐vitro antibacterial, antifungal and brine shrimp bioassay. The biological activity data show the Zn(II) complexes to be more potent antibacterial and antifungal than the parent simple Schiff bases. Copyright © 2011 John Wiley & Sons, Ltd.     

The hydroxyl radical reaction rate constant and products of 3,5‐dimethyl‐1‐hexyn‐3‐ol

A bimolecular rate constant,k_DHO, of (29 ± 9) × 10^?12 cm³ molecule^?1 s^?1 was measured using the relative rate technique for the reaction of the hydroxyl radical (OH) with 3,5‐dimethyl‐1‐hexyn‐3‐ol (DHO, HC?CC(OH)(CH₃)CH₂CH(CH₃)₂) at (297 ± 3) K and 1 atm total pressure. To more clearly define DHO's indoor environment degradation mechanism, the products of the DHO + OH reaction were also investigated. The positively identified DHO/OH reaction products were acetone ((CH₃)₂C?O), 3‐butyne‐2‐one (3B2O, HC?CC(?O)(CH₃)), 2‐methyl‐propanal (2MP, H(O?)CCH(CH₃)₂), 4‐methyl‐2‐pentanone (MIBK, CH₃C(?O)CH₂CH(CH₃)₂), ethanedial (GLY, HC(?O)C(?O)H), 2‐oxopropanal (MGLY, CH₃C(?O)C(?O)H), and 2,3‐butanedione (23BD, CH₃C(?O)C(?O)CH₃). The yields of 3B2O and MIBK from the DHO/OH reaction were (8.4 ± 0.3) and (26 ± 2)%, respectively. The use of derivatizing agents O‐(2,3,4,5,6‐pentalfluorobenzyl)hydroxylamine (PFBHA) and N,O‐bis(trimethylsilyl)trifluoroacetamide (BSTFA) clearly indicated that several other reaction products were formed. The elucidation of these other reaction products was facilitated by mass spectrometry of the derivatized reaction products coupled with plausible DHO/OH reaction mechanisms based on previously published volatile organic compound/OH gas‐phase reaction mechanisms. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 534–544, 2004     

Mitochondria‐Targeting Oxidovanadium(IV) Complex as a Near‐IR Light Photocytotoxic Agent

Oxidovanadium(IV) complexes [VO(L¹)(phen)] ? Cl ( 1 ) and [VO(L²)(L³)] ? Cl ( 2 ), in which HL¹ is 2‐{[(benzimidazol‐2‐yl)methylimino]‐methyl}phenol (sal‐ambmz), HL² is 2‐[({1‐[(anthracen‐9‐yl)methyl]‐benzimidazol‐2‐yl}methylimino)‐methyl]phenol (sal‐an‐ambmz), phen is 1,10‐phenanthroline and L³ is dipyrido[3,2‐a:2′,3′‐c]phenazine (dppz) conjugated to a Gly‐Gly‐OMe dipeptide moiety, were prepared, characterized, and their DNA binding, photoinduced DNA‐cleavage, and photocytotoxic properties were studied. Fluorescence microscopy studies were performed by using complex 2 in HeLa and HaCaT cells. Complex 1 , structurally characterized by X‐ray crystallography, has a vanadyl group in VO₂N₄ core with the VO²⁺ moiety bonded to N,N‐donor phen and a N,N,O‐donor Schiff base. Complex 2 , having an anthracenyl fluorophore, showed fluorescence emission bands at 397, 419, and 443 nm. The complexes are redox‐active exhibiting the V(IV)/V(III) redox couple near ?0.85 V versus SCE in DMF 0.1 M tetrabutylammonium perchlorate (TBAP). Complex 2 , having a dipeptide moiety, showed specific binding towards poly(dAdT)₂ sequence. The dppz‐Gly‐Gly‐OMe complex showed significant DNA photocleavage activity in red light of 705 nm through a hydroxyl radical (^.OH) pathway. Complex 2 showed photocytotoxicity in HaCaT and HeLa cells in visible light (400–700 nm) and red light (620–700 nm), however, the complex was less toxic in the dark. Fluorescence microscopy revealed the localization of complex 2 primarily in mitochondria. Apoptosis was found to occur inside mitochondria (intrinsic pathway) caused by ROS generation.     

Versatile and Efficient Synthesis of a New Class of Aza‐Based Phosphinic Amide Ligands via Unusual P?C Cleavage

A new class of bidentate, aza‐based phosphinic amide ligands of the type RN(H)P(?O)(2‐py)₂ (2‐py = 2‐pyridyl) was synthesized within minutes via a one‐pot process including Staudinger reaction of an organic azide (RN₃) with 2‐pyridylphosphines, followed by partial, unprecedented hydrolysis under loss of one aromatic substituent. The structure of the unusual‐hydrolysis product H₂C?CH(CH₂)₉N(H)P(?O)(2‐py)₂ ( 5a ) was characterized by IR, ¹H‐ and ³¹P‐NMR, as well as by X‐ray crystal‐structure analysis (Figure). The tetrahedral P‐atom was found to be surrounded by a trigonal‐pyramidal arrangement of the substituents. To gain insight into the formation of these novel phosphinic amides, a series of intermediate iminophosphoranes, H₂C?CH(CH₂)₉N?P(Ar)_n(2‐py)_{3 ? n} (n = 0–3), compounds 1a – 1f , were synthesized, and their hydrolyses were studied. All tested compounds followed the classical hydrolysis route of P?N cleavage under acidic conditions. Sequential hydrolysis to 5a – 5d only occurred under either basic conditions or in wet MeCN as solvent. Notably, H₂C?CH(CH₂)₉N?P(C₆H₅)(4‐MeO‐2‐py)₂ ( 1c ) was hydrolyzed at a much slower rate compared to its analogue 1b lacking the MeO group. On the contrary, the halogenated compounds H₂C?CH(CH₂)₉N?P(4‐X‐C₆H₄)₃ ( 1f,g ) (X = F, Cl) were hydrolyzed at a notably faster rate relative to the non‐halogenated congener 1e (X = H).     

Targeting π‐Conjugated Multiple Donor–Acceptor Motifs Exemplified by Tetrathiafulvalene‐Linked Quinoxalines and Tetrabenz[bc,ef,hi,uv]ovalenes: Synthesis,Spectroscopic, Electrochemical,and Theoretical Characterization

An efficient synthetic approach to a symmetrically functionalized tetrathiafulvalene (TTF) derivative with two diamine moieties, 2‐[5,6‐diamino‐4,7‐bis(4‐pentylphenoxy)‐1,3‐benzodithiol‐2‐ylidene]‐4,7‐bis(4‐pentylphenoxy)‐1,3‐benzodithiole‐5,6‐diamine ( 2 ), is reported. The subsequent Schiff‐base reactions of 2 afford large π‐conjugated multiple donor–acceptor (D–A) arrays, for example, the triad 2‐[4,9‐bis(4‐pentylphenoxy)‐1,3‐dithiolo[4,5‐g]quinoxalin‐2‐ylidene]‐4,9‐bis(4‐pentylphenoxy)‐1,3‐dithiolo[4,5‐g]quinoxaline ( 8 ) and the corresponding tetrabenz[bc,ef,hi,uv]ovalene‐fused pentad 1 , in good yields and high purity. The novel redox‐active nanographene 1 is so far the largest known TTF‐functionalized polycyclic aromatic hydrocarbon (PAH) with a well‐resolved ¹H NMR spectrum. The electrochemically highly amphoteric pentad 1 and triad 8 exhibit various electronically excited charge‐transfer states in different oxidation states, thus leading to intense optical intramolecular charge‐transfer (ICT) absorbances over a wide spectral range. The chemical and electrochemical oxidations of 1 result in an unprecedented TTF^?+ radical cation dimerization, thereby leading to the formation of [ 1 ^?+]₂ at room temperature in solution due to the stabilizing effect, which arises from strong π–π interactions. Moreover, ICT fluorescence is observed with large solvent‐dependent Stokes shifts and quantum efficiencies of 0.05 for 1 and 0.035 for 8 in dichloromethane.     

Oxidative Kopplung von Kohlendioxid mit substituierten Furfuryliden‐iminen an Nickel(0)‐Zentren: Struktur und Reaktivität der gebildeten Nickelacyclen

Furfurylidene‐imines as Components of the Oxidative Coupling with CO₂ at Nickel(0) centers: Influence of the Substituents on the Structure of the resulting Nickelacycles The oxidative coupling between benzaldehyd‐N‐furfurylidene‐imine, CO₂ und Ni(cod)₂ results in THF or 1.4‐dioxane in the formation of the organometallic macrocycle 1a , even if a large excess of Schiff base was used. 1a reacts with Ph₃P under partial elimination of CO₂ to form the tetranuclear complex 2 , which contains two nickela‐aziridine rings linked with two nickelacyclic carbamates. Surprisingly, the protolysis of 1 followed by elimination of CO₂ results in the formation of the organometallic product 3 which also contains a Ni‐C bond in a (protonated) nickelaaziridine ring. Para‐hydroxybenzaldehyd‐N‐furfurylidene‐imine ( B ), CO₂ und Ni(cod)₂ react under oxidative coupling to form the nickelacycle 4 , in which the monomeric metallacyclic units are connected by a hydrogen‐bonded network to form a polymeric supramolecular system. Two of the Schiff bases B coordinate as N‐donors at the Ni^II center, the third Schiff base acts as the substrate for CO₂. Ferrocene‐carbaldehyde‐N‐furfurylidene‐imine forms in the presence of bipy the monomeric nickelacycle 22 containing the intact ferrocenyl unit. The solid‐state structures of 2, 3, 4, and 22 were determinated by X‐ray crystallography. Comparison of CO valence frequencies allows to indicate the coordination mode in nickelacycles with other Schiff bases.     

Electrochemical Study of Schiff Bases by Means of Self‐Assembled Monolayers

In this paper, Schiffbases were investigated using cyclic voltammetry (CV) and impedance electrochemical spectroscopy (EIS) techniques by means of self‐assembled monolayers for the first time, where a 0.1 M KCl solution and the redox couple of Fe(CN)₆^3?/Fe(CN)₆^4?were used as the electrolyte and probing‐pin, respectively. The monolayers formed by the employed Schiff base were proved to be relatively stable, and its electrochemical response in the studied system with different pH values was also de scribed clearly with CV and EIS plots. The results show that the monolayer of Schiff bases could exist in the solution with pH value from 2 to 10. In the EIS measurement in the concentration range from 10^?5 M to 5× 10^?4 M, a nearly linear relation ship between the charge transfer resistance (R_ct) and the logarithm concentration of Cu²+was observed, suggesting that Cu²+ could be titrated with the EIS method quasi‐quantitatively. The phenomenon agreed with the former report very well. Using the self‐assembled monolayers to study Schiff bases with the electrochemical method is the major contribution of our work.     

Metal Complexes with Biologically Important Ligands. CLXVI Tetracarbonyl Complexes of Chromium(0) and Molybdenum(0) with Schiff Bases from Pyridine‐2‐carboxaldehyde and α‐Amino Acid Esters as N,N‐Chelate Ligands

The complexes [M(CO)₄(pyridyl‐CH=N‐CHRCO₂R′)] (M = Cr, Mo; R = H, CH₃, CH(CH₃)₂, CH₂CH(CH₃)₂) were obtained by reaction of the Schiff bases from pyridine‐2‐carboxaldehyde and glycine, L‐alanine, L‐valine or L‐leucine esters with the norbornadiene complexes [M(CO)₄(nbd)] and were characterized by IR, ¹H and ¹³C NMR and UV‐vis spectra. The deeply colored complexes exhibit solvatochromism.     

Highly luminescent diyne (?CC?CC?) containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer: Synthesis and characterization

Luminophoric dialdehyde 1,4‐bis[4‐formylphenylethynyl‐(2,5‐dioctadecyloxyphenyl)‐buta‐1,3‐diyne] ( 4 ) enables the synthesis of diyne‐containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer poly[1,4‐phenylene‐ethynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐butadi‐1,3‐ynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethynylene‐1,4‐phenylene‐ethene‐1,2‐diyl‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethene‐1,2‐diyl] ( 7 ) with a well‐defined general structure (? Ph? C?C? Ar? C?C? C?C? Ar? C?C? Ph? CH?CH? Ar? CH?CH? )_n, which was confirmed by NMR and infrared spectroscopy. The highly luminescent material is thermostable, soluble in usual organic solvents through the grafting of octadecyloxy side groups, and can be processed into transparent films. With the aim to investigate the effect of ? C?C? C?C? in the photophysical behavior of 7 , a comparison of the photophysics of monomers 3 [1,4‐bis(4‐formylphenylethynyl)‐2,5‐dioctadecyloxybenzene] and 4 and subsequently of their respective polymers 6 and 7 has been carried out. Similar photophysical behaviors for 6 (poly[1,4‐phenylenethynylene‐1,4‐(2,5‐dioctadecyloxyphenylene)ethene‐1,2‐diyl]) and 7 were observed in dilute CHCl₃ solution as a result of an identical chromophore system responsible for the absorption (λ_a = 448 nm) and emission (λ_f = 490 nm) in both compounds. The increased planarization and enhanced rigidity of the conjugated backbone in the solid state at room temperature as well as in frozen dilute tetrahydrofuran solution at 77 K cause the bathochromic shift of the absorption and emission spectra. The large octadecyloxy side chains obviously limit strong π‐π interchain interactions in the solid films, which explains the high fluorescence quantum yields of 35 and 52% obtained for 6 and 7 , respectively. The energetically arduous migration of the π electron through the diyne units not only requires a higher threshold voltage for the detection of photoconductivity in 7 but could possibly limit radiationless deactivation channels of the exciton, which explains the approximate 20% fluorescence quantum yields difference between 6 and 7 in the solid state. The electron‐withdrawing effect of the triple bonds confer both 6 and 7 with a good electron‐accepting property (E^ox = 1.39 V vs Ag/AgCl) if used in light‐emitting diode devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2670–2679, 2002     

Substituent Effect on N-Benzylideneanilines by DFT Energy Partition

To investigate the substituent effect on x-electron delocalization of the N-benzylideneaniline （NBA）, the vertical resonance energies △E^V（θ） of eleven substituted NBAs were separated into n and a parts at the B3LYP/6-311G（d） level of the Density Functional Theory （DFT）. When substituted with an electron-releasing group --OH, the calculated △E^V（θ） of NBA was increased, indicative of more resonance destabilization than the mother molecule. However, when substituted with an electron-withdrawing group -NO2, the calculated △E^V（θ） values indicated less resonance destabilization. The most destabilizing effect was observed especially when the -OH group located at the ortho-position of the aromatic ring in the fragment -N=CH-Ar. For most of the substituted NBA molecules, it was the destabilized a framework that determined the destabilizing feature of the vertical resonance energy, instead of the stabilized n system. When the -NO2 substituent at the para-position of the aromatic ring of the -N=CH-Ar group, the π system had the highest stabilizing effect while the σ framework exhibited the highest destabilizing effect. While the -NO2 substituent was at the para-position of the left aromatic ring （At-）, the NBA had the least vertical resonance energy value.     

Synthesis and characterization of an ionic conjugated polymer: Poly[2‐ethynyl‐N‐(2‐thiophenecarbonyl) pyridinium chloride]

The activated polymerization of 2‐ethynylpyridine by using 2‐thiophenecarbonyl chloride yielded the corresponding conjugated ionic polymer, poly[2‐ethynyl‐N‐(2‐thiophenecarbonyl)pyridinium chloride] (PETCPC). The polymerization proceeded well to give high yield of polymer without any additional initiator or catalyst. The instrumental analysis data on polymer structure indicated that the present ionic polymer have a conjugated polymer backbone system having N‐(2‐thiophenecarbonyl)pyridinium chloride as substituents. The photoluminescence maximum peak of PETCPC was located at 573 nm, which corresponds to the photon energy of 2.16 eV. The aromatic functional substituents in the conjugated backbone system shift PL maximum values because it makes different molecule arrangement. The cyclovoltamograms of PETCPC exhibited the electrochemically stable window at ?1.24 to 1.80 V region. It was found that the kinetics of the redox process of polymer might be controlled by the reactant diffusion process from the experiment of the oxidation current density of polymer versus the scan rate. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6153–6162, 2009     

Excellent Suzuki–Miyaura catalytic activity of a new Pd(II) complex with sulfonamide–Schiff base ligand

A new air‐stable Pd(II) complex containing a sulfonamide–Schiff base ligand has been synthesized, characterized and investigated as a catalyst for the Suzuki–Miyaura reactions of aryl halides with arylboronic acids. Theoretical calculations (B3LYP) and spectroscopic evidence suggest that the sulfonamide–Schiff base coordinates to the Pd centre through sulfonamide nitrogen (? SO₂NH₂) rather than imine (? CH?N). The complex shows excellent cross‐coupling activity with aryl bromides in water at room temperature and aryl chlorides in isopropanol at 60°C. Copyright © 2016 John Wiley & Sons, Ltd.     

Localized Mixed‐Valence and Redox Activity within a Triazole‐Bridged Dinucleating Ligand upon Coordination to Palladium

The new dinucleating redox‐active ligand ( L^H4 ), bearing two redox‐active NNO‐binding pockets linked by a 1,2,3‐triazole unit, is synthetically readily accessible. Coordination to two equivalents of Pd^II resulted in the formation of paramagnetic (S= ) dinuclear Pd complexes with a κ²‐N,N′‐bridging triazole and a single bridging chlorido or azido ligand. A combined spectroscopic, spectroelectrochemical, and computational study confirmed Robin–Day Class II mixed‐valence within the redox‐active ligand, with little influence of the secondary bridging anionic ligand. Intervalence charge transfer was observed between the two ligand binding pockets. Selective one‐electron oxidation allowed for isolation of the corresponding cationic ligand‐based diradical species. SQUID (super‐conducting quantum interference device) measurements of these compounds revealed weak anti‐ferromagnetic spin coupling between the two ligand‐centered radicals and an overall singlet ground state in the solid state, which is supported by DFT calculations. The rigid and conjugated dinucleating redox‐active ligand framework thus allows for efficient electronic communication between the two binding pockets.     

An Efficient Method for the Synthesis of N‐uracil‐4‐oxo‐thiazolidines without Catalyst

We have developed highly efficient, one‐pot three component reaction of 5‐amino‐uracil and aromatic aldehydes with thioglycolic acid for the synthesis of N‐uracil‐thiazolidinones in excellent yields. The same products were also prepared by the reaction of Schiff bases of 5‐amino‐uracil with thioglycolic acid. In addition, benzylation of thiazolidinone derivatives and Schiff bases by using benzyl chloride was investigated. The results obtained from elemental microanalysis and different spectral data are in agreement with the assigned structures.     

Powerful Bispyridinylidene Organic Reducing Agents with Iminophosphorano π‐Donor Substituents

Four members of a new family of powerful bispyridinylidene organic reducing agents have been prepared, which exploit iminophosphorano (?N=PR₃; R=Ph, Cy) π‐donor substituents. Electrochemical studies show exceptionally high oxidation potentials, ranging from 1.30 to 1.51 V versus SCE. These new reductants were shown to effectively convert 1‐bromonaphthalene to naphthalene under mild reaction conditions. From the redox potentials, substituent constants (σ_p⁺) for the iminophosphorano groups Ph₃P=N? (?1.82) and Cy₃P=N? (?2.21) were determined, demonstrating their superior π‐donating properties compared to traditional amino substituents.     

Functionalized conducting polymers for chemical sensors – an in situ ESR/UV‐Vis‐NIR voltammetric study

The redox and optical properties of various well defined polymer and copolymer films containing pyrrole or thiophene units were studied. The in situ ESR/UV‐Vis‐NIR spectroelectrochemistry was applied to investigate polymers and copolymers deposited both electrochemically or by a special chemical procedure using adhesion promoter onto the optically transparent indium‐tin‐oxide (ITO) electrodes. The spectroelectrochemical responses of chemically and electrochemically prepared polythiophenes on ITO were compared and the electronic structures of both polymers found to be similar. In situ ESR/UV‐Vis‐NIR voltammetric studies on electrochemically prepared copolymers containing pyrrole units and various N,N′‐ethylene‐bis(salicylidenimine) (salen) transition metal complexes indicate the presence of both polysalen and polypyrrole redox active centers in the copolymer.     

Synthesis,characterization of naphthalene‐based polyimides,and their use as immobilized enzyme membrane

A new monomer, 1,5‐bis(p‐dimethylaminophenylimino)naphthalene, was prepared through Schiff‐base condensation reaction of 1,5‐diaminonaphthalene and 4‐(dimethylamino)benzaldehyde in the presence of ethanol. A series of aromatic polyimides bearing naphthalene and ? CH?N? groups were synthesized from the diamine with five kinds of commercial dianhydrides via a conventional one‐stage process. The resulting naphthalene based polyimides (NBPs) showed good solubilities in N‐methyl‐2‐pyrrolidone and m‐cresol. NBPs had glass‐transition temperatures at 139–174°C and 10% weightloss temperatures above 430 °C in nitrogen atmospheres. Excellent properties of NBPs are attributed to the incorporation of the naphthalene and ? CH?N? group in 1,5‐bis(p‐dimethylaminophenylimino)naphthalene. Moreover, chemically prepared polyimides were used for immobilization of glucose oxidase (GOx). The amperometric responses of the NBPs‐GOx‐Pt electrodes toward glucose were examined at a potential of 0.7 V in PBS solution by means of time‐base (TB) technique. Results show that NBPs bearing ? O? group membrane (PI‐3) has many advantages in the immobilization of glucose oxidase because of its strong adherence to electrode surface and chemical stability and selectivity. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and Exploration of Ladder‐Structured Large Aromatic Dianhydrides as Organic Cathodes for Rechargeable Lithium‐Ion Batteries

Compared to anode materials in Li‐ion batteries, the research on cathode materials is far behind, and their capacities are much smaller. Thus, in order to address these issues, we believe that organic conjugated materials could be a solution. In this study, we synthesized two non‐polymeric dianhydrides with large aromatic structures: NDA‐4N (naphthalenetetracarboxylic dianhydride with four nitrogen atoms) and PDA‐4N (perylenetetracarboxylic dianhydride with four nitrogen atoms). Their electrochemical properties have been investigated between 2.0 and 3.9 V (vs. Li⁺/Li). Benefiting from multi‐electron reactions, NDA‐4N and PDA‐4N could reversibly achieve 79.7 % and 92.3 %, respectively, of their theoretical capacity. Further cycling reveals that the organic compound with a relatively larger aromatic building block could achieve a better stability, as an obvious 36.5 % improvement of the capacity retention was obtained when the backbone was switched from naphthalene to perylene. This study proposes an opportunity to attain promising small‐molecule‐based cathode materials through tailoring organic structures.