A water soluble macromolecular nanobox having porphyrinic walls as a large host for giant guests

Cyclic tetra{5,15‐di‐[p(ω‐methoxypolyethyleneoxy)phenyl]‐10,20‐[p‐oxyphenyl] methylen porphyrin}, cy‐[O‐(H₂‐PTPEG₂)‐O‐CH₂‐]₄ , a water soluble macromolecule consisting of four porphyrin units [each with two long ω‐methoxypolyethyleneoxy (PEG) branches bound on its peripheral positions] linked by means of four methylenoxy bridges, was prepared by an interfacial etherification reaction. Structural and spectroscopic characterization of cy‐[O‐(H₂‐PTPEG₂)‐O‐CH₂‐]₄ and of its cobalt‐derivative {cy‐[O‐(Co‐PTPEG₂)‐O‐CH₂‐]₄} was performed by means of MALDI‐TOF mass spectrometry, NMR, UV–vis, and circular dichroism spectroscopy. The data obtained from the cy‐[O‐(Co‐PTPEG₂)‐O‐CH₂‐]₄/Gramicidin‐S mixture showed that some evident spectral changes were compatible with the formation of a supramolecular structure between the porphyrinic nanobox and the Gramicidin S (a polypeptide having a relevant pharmacological importance). These preliminary data highlight how cy‐[O‐(H₂‐PTPEG₂)‐O‐CH₂‐]₄ and/or its metalled derivatives, for their both chemical composition and structural arrangement, have promising properties for applications as a drug carrier in aqueous media. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A structural study of 4‐aminoantipyrine and six of its Schiff base derivatives

Six derivatives of 4‐amino‐1,5‐dimethyl‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐3‐one (4‐aminoantipyrine), C₁₁H₁₃N₃O, (I), have been synthesized and structurally characterized to investigate the changes in the observed hydrogen‐bonding motifs compared to the original 4‐aminoantipyrine. The derivatives were synthesized from the reactions of 4‐aminoantipyrine with various aldehyde‐, ketone‐ and ester‐containing molecules, producing (Z)‐methyl 3‐[(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)amino]but‐2‐enoate, C₁₆H₁₉N₃O₃, (II), (Z)‐ethyl 3‐[(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)amino]but‐2‐enoate, C₁₇H₂₁N₃O₃, (III), ethyl 2‐[(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)amino]cyclohex‐1‐enecarboxylate, C₂₀H₂₅N₃O₃, (IV), (Z)‐ethyl 3‐[(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)amino]‐3‐phenylacrylate, C₂₂H₂₃N₃O₃, (V), 2‐cyano‐N‐(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)acetamide, C₁₄H₁₄N₄O₂, (VI), and (E)‐methyl 4‐{[(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)amino]methyl}benzoate, C₂₀H₁₉N₃O₃, (VII). The asymmetric units of all these compounds have one molecule on a general position. The hydrogen bonding in (I) forms chains of molecules via intermolecular N—H...O hydrogen bonds around a crystallographic sixfold screw axis. In contrast, the formation of enamines for all derived compounds except (VII) favours the formation of a six‐membered intramolecular N—H...O hydrogen‐bonded ring in (II)–(V) and an intermolecular N—H...O hydrogen bond in (VI), whereas there is an intramolecular C—H...O hydrogen bond in the structure of imine (VII). All the reported compounds, except for (II), feature π–π interactions, while C—H...π interactions are observed in (II), C—H...O interactions are observed in (I), (III), (V) and (VI), and a C—O...π interaction is observed in (II).     

NBS‐Promoted Rearrangement of 1,1‐Diarylmethylenecyclopentane

The 1‐aroyl‐1‐aryl‐2‐bromocyclopentanes 3a , 3b , 3c and 3d (Ar = C₆H₅, 2‐FC₆H₄, 3‐FC₆H₄, 4‐FC₆H₄) were prepared from N‐bromosuccinimide (NBS)‐promoted rearrangement of 1,1‐diarylmethylenecyclopentane 2 . The possible mechanism was proposed. Two 1‐phenyl‐cyclopentane carbamides 5a and 5b with the anti‐influenza effect were also accomplished from compound 3a .     

Hydrogen‐bonded assembly in six closely related pyrazolo[3,4‐b]pyridine derivatives; a simple chain,three types of chains of rings and a complex sheet structure

Six closely related pyrazolo[3,4‐b]pyridine derivatives, namely 6‐chloro‐3‐methyl‐1,4‐diphenylpyrazolo[3,4‐b]pyridine‐5‐carbaldehyde, C₂₀H₁₄ClN₃O, (I), 6‐chloro‐3‐methyl‐4‐(4‐methylphenyl)‐1‐phenylpyrazolo[3,4‐b]pyridine‐5‐carbaldehyde, C₂₁H₁₆ClN₃O, (II), 6‐chloro‐4‐(4‐chlorophenyl)‐3‐methyl‐1‐phenylpyrazolo[3,4‐b]pyridine‐5‐carbaldehyde, C₂₀H₁₃Cl₂N₃O, (III), 4‐(4‐bromophenyl)‐6‐chloro‐3‐methyl‐1‐phenylpyrazolo[3,4‐b]pyridine‐5‐carbaldehyde, C₂₀H₁₃BrClN₃O, (IV), 6‐chloro‐4‐(4‐methoxyphenyl)‐3‐methyl‐1‐phenylpyrazolo[3,4‐b]pyridine‐5‐carbaldehyde, C₂₁H₁₆ClN₃O₂, (V), and 6‐chloro‐3‐methyl‐4‐(4‐nitrophenyl)‐1‐phenylpyrazolo[3,4‐b]pyridine‐5‐carbaldehyde, C₂₀H₁₃ClN₄O₃, (VI), which differ only in the identity of a single small substituent on one of the aryl rings, crystallize in four different space groups spanning three crystal systems. The molecules of (I) are linked into a chain of rings by a combination of C—H...N and C—H...π(arene) hydrogen bonds; those of (II), (IV) and (V), which all crystallize in the space group P, are each linked by two independent C—H...O hydrogen bonds to form chains of edge‐fused rings running in different directions through the three unit cells; the molecules of (III) are linked into complex sheets by a combination of two C—H...O hydrogen bonds and one C—H...π(arene) hydrogen bond; finally, the molecules of (VI) are linked by a single C—H...O hydrogen bond to form a simple chain.     

Structural investigation of one‐ and two‐dimensional coordination polymers based on cobalt–bis(dioxolene) units and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane

The combination of cobalt, 3,5‐di‐tert‐butyldioxolene (3,5‐dbdiox) and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane (tpch) yields two coordination polymers with different connectivities, i.e. a one‐dimensional zigzag chain and a two‐dimensional sheet. Poly[[bis(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)bis(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)[μ₄‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]cobalt(III)]–ethanol–water 1/7/5], {[Co₂(C₁₄H₂₀O₂)₄(C₂₆H₂₄N₄O)]·7C₂H₅OH·5H₂O}_n or {[Co₂(3,5‐dbdiox)₄(tpch)}·7EtOH·5H₂O}_n, is the second structurally characterized example of a two‐dimensional coordination polymer based on linked {Co(3,5‐dbdiox)₂} units. Variable‐temperature single‐crystal X‐ray diffraction studies suggest that catena‐poly[[[(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)cobalt(III)]‐μ‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]–ethanol–water (1/1/5)], {[Co(C₁₄H₂₀O₂)₂(C₂₆H₂₄N₄O)]·C₂H₅OH·5H₂O}_n or {[Co(3,5‐dbdiox)₂(tpch)]·EtOH·5H₂O}_n, undergoes a temperature‐induced valence tautomeric interconversion.     

Synthesis and Biological Activity of New Selected Different Heterocyclic Nitrogen Compounds Incorporating 1,4‐naphthquinone

Condensation of 1‐phenylnaphthcyclopentan‐2,4,9‐trione ( II ) with aromatic aldehydes yielded the corresponding 3‐benzylidene deivatives ( III_a‐f ). Interaction of III_a‐f with hydrazines, hydroxylamine, urea and thiourea afforded some new (pyrazoline IV_a‐f, V_a‐f , Isoxazolino VI_a‐f pyrimidinone and/or pyrimidinethione, VII_a‐f, VIII_a‐f ) derivatives, respectively. Also, a series of some spirocompounds covering β‐lactams and thiazolidinones ( Xg‐j, XIg‐j ) incorporating 1‐phenylnaphthcyclopentan‐2,4,9‐trione were prepared.     

Organic Nonvolatile Resistive Switching Memory Based on Molecularly Entrapped Fullerene Derivative within a Diblock Copolymer Nanostructure

Organic nonvolatile resistive switching memory is developed via selective incorporation of fullerene derivatives, [6,6]‐phenyl‐C61 butyric acid methyl ester (PCBM), into the nanostructure of self‐assembled poly(styrene‐b‐methyl methacrylate) (PS₁₀‐b‐PMMA₁₃₀) diblock copolymer. PS₁₀‐b‐PMMA₁₃₀ diblock copolymer provides a spatially ordered nanotemplate with a 10‐nm PS nanosphere domain surrounded by a PMMA matrix. Spin casting of the blend solution of PS₁₀‐b‐PMMA₁₃₀ and PCBM spontaneously forms smooth films without PCBM aggregation in which PCBM molecules are incorporated within a PS nanosphere domain of PS₁₀‐b‐PMMA₁₃₀ nanostructure by preferential intermixing propensity of PCBM and PS. Based on the well‐defined PS₁₀‐b‐PMMA₁₃₀/PCBM nanostructure, resistive random access memory (ReRAM) exhibits significantly improved bipolar‐switching behavior with stable and reproducible properties at low operating voltages (RESET at 1.3 V and SET at −1.5 V) under ambient conditions. Finally, flexible memory devices are achieved using a nanostructured PS₁₀‐b‐PMMA₁₃₀/PCBM composite in which no significant degradation of electrical properties is observed before and after bending.     

Synthesis,structural characterization and catalytic activities of dicopper(II) complexes derived from tridentate pyrazole‐based N2O ligands

A group of a diverse family of dinuclear copper(II) complexes derived from pyrazole‐containing tridentate N₂O ligands, 1,3‐bis(3,5‐dimethylpyrazol‐1‐yl)propan‐2‐ol (Hdmpzpo), 1,3‐bis(3‐phenyl‐5‐methyl pyrazol‐1‐yl)propan‐2‐ol (Hpmpzpo) and 1,3‐bis(3‐cumyl‐5‐methylpyrazol‐1‐yl)propan‐2‐ol (Hcmpzpo), were synthesized and characterized by elemental analysis, IR spectroscopy and three of them also by single‐crystal X‐ray diffraction. Three complexes, [Cu₂(pmpzpo)₂](NO₃)₂·2CH₃OH ( 3 ·2CH₃OH), [Cu₂(pmpzpo)₂](ClO₄)₂ ( 4 ) and [Cu₂(cmpzpo)₂](ClO₄)₂·2DMF ( 7 ·2DMF), each exhibits a dimeric structure with a inversion center being located between the two copper atoms. The metal ion is coordinated in a distorted square planar environment by two pyrazole nitrogen atoms and two bridging alkoxo oxygen atoms. Both complexes 1 ·CH₃OH·H₂O and 3 ·2CH₃OH were investigated in anaerobic conditions for the catalytic oxidation of 3,5‐di‐tert‐butylcatechol (3,5‐DTBC) to the corresponding quinone (3,5‐DTBQ), for modeling the functional properties of catechol oxidase. Copyright © 2007 John Wiley & Sons, Ltd.     

The effect of the coordination orientation of N atoms on polymeric structures: synthesis and characterization of one‐ and two‐dimensional CuII coordination polymers based on 4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐3‐ylmethyl)sulfanyl]‐1,2,4‐triazole

Three new one‐ (1D) and two‐dimensional (2D) Cu^II coordination polymers, namely poly[[bis{μ₂‐4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐3‐ylmethyl)sulfanyl]‐1,2,4‐triazole}copper(II)] bis(methanesulfonate) tetrahydrate], {[Cu(C₁₃H₁₂N₅S)₂](CH₃SO₃)₂·4H₂O}_n ( 1 ), catena‐poly[[copper(II)‐bis{μ₂‐4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,2,4‐triazole}] dinitrate methanol disolvate], {[Cu(C₁₃H₁₂N₅S)₂](NO₃)₂·2CH₃OH}_n ( 2 ), and catena‐poly[[copper(II)‐bis{μ₂‐4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,2,4‐triazole}] bis(perchlorate) monohydrate], {[Cu(C₁₃H₁₂N₅S)₂](ClO₄)₂·H₂O}_n ( 3 ), were obtained from 4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐3‐ylmethyl)sulfanyl]‐1,2,4‐triazole with pyridin‐3‐yl terminal groups and from 4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,2,4‐triazole with pyridin‐4‐yl terminal groups. Compound 1 displays a 2D net‐like structure. The 2D layers are further linked through hydrogen bonds between methanesulfonate anions and amino groups on the framework and guest H₂O molecules in the lattice to form a three‐dimensional (3D) structure. Compound 2 and 3 exhibit 1D chain structures, in which the complicated hydrogen‐bonding interactions play an important role in the formation of the 3D network. These experimental results indicate that the coordination orientation of the heteroatoms on the ligands has a great influence on the polymeric structures. Moreover, the selection of different counter‐anions, together with the inclusion of different guest solvent molecules, would also have a great effect on the hydrogen‐bonding systems in the crystal structures.     

Difunctionalized {closo‐1‐CB11} Clusters: 1‐ and 2‐Amino‐12‐ethynylcarba‐closo‐dodecaborates

Carba‐closo‐dodecaborate anions with two functional groups have been synthesized via a simple two‐step procedure starting from monoamino‐functionalized {closo‐1‐CB₁₁} clusters. Iodination at the antipodal boron atom provided access to [1‐H₂N‐12‐I‐closo‐1‐CB₁₁H₁₀]^? ( 1 a ) and [2‐H₂N‐12‐I‐closo‐1‐CB₁₁H₁₀]^? ( 2 a ), which have been transformed into the anions [1‐H₂N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀]^? (R=H ( 1 b ), Ph ( 1 c ), Et₃Si ( 1 d )) and [2‐H₂N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀]^? (R=H ( 2 b ), Ph ( 2 c ), Et₃Si ( 2 d )) by microwave‐assisted Kumada‐type cross‐coupling reactions. The syntheses of the inner salts 1‐Me₃N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀ (R=H ( 1 e ), Et₃Si ( 1 f )) and 2‐Me₃N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀ (R=H ( 2 e ), Et₃Si ( 2 f )) are the first examples for a further derivatization of the new anions. All {closo‐1‐CB₁₁} clusters have been characterized by multinuclear NMR and vibrational spectroscopy as well as by mass spectrometry. The crystal structures of Cs 1 a , [Et₄N] 2 a , K 1 b , [Et₄N] 1 c , [Et₄N] 2 c , 1 e , and [Et₄N][1‐H₂N‐2‐F‐12‐I‐closo‐1‐CB₁₁H₉]?0.5 H₂O ([Et₄N ]4 a ?0.5 H₂O) have been determined. Experimental spectroscopic data and especially spectroscopic data and bond properties derived from DFT calculations provide some information on the importance of inductive and resonance‐type effects for the transfer of electronic effects through the {closo‐1‐CB₁₁} cage.     

[Ba(Benzo‐15‐Krone‐5)2](In)2: Darstellung und strukturelle Charakterisierung eines Triiodids (n = 3) und eines Heptaiodids (n = 7)

[Ba(benzo‐15‐crown‐5)₂](I₃)₂ and [Ba(benzo‐15‐crown‐5)₂](I₇)₂ can be obtained in crystalline form by reacting benzo‐15‐crown‐5 (C₁₄H₂₀O₅), barium iodide (BaI₂), and iodine (I₂) in ethan‐ole /dichloromethane. The triiodide consists of a sandwich‐like cation [Ba(benzo‐15‐crown‐5)₂]²⁺ and an isolated symmetrically linear I₃^‐ anion. The unusual I₇^‐ anion in the heptaiodide can be described as a V‐shaped pentaiodide unit, which is connected with a slightly widened iodine molecule to the rare Z‐form of the heptaiodide ion. In the crystal structure, secondary bonding distances lead to almost planar ten‐membered iodine rings, which are connected by common edges to form staircase‐like bands.     

Seven 5‐benzylamino‐3‐tert‐butyl‐1‐phenyl‐1H‐pyrazoles: unexpected isomorphisms,and hydrogen‐bonded supramolecular structures in zero,one and two dimensions

5‐Benzylamino‐3‐tert‐butyl‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₃N₃, (I), and its 5‐[4‐(trifluoromethyl)benzyl]‐, C₂₁H₂₂F₃N₃, (III), and 5‐(4‐bromobenzyl)‐, C₂₀H₂₂BrN₃, (V), analogues, are isomorphous in the space group C2/c, but not strictly isostructural; molecules of (I) form hydrogen‐bonded chains, while those of (III) and (V) form hydrogen‐bonded sheets, albeit with slightly different architectures. Molecules of 3‐tert‐butyl‐5‐(4‐methylbenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₁H₂₅N₃, (II), are linked into hydrogen‐bonded dimers by a combination of N—H...π(arene) and C—H...π(arene) hydrogen bonds, while those of 3‐tert‐butyl‐5‐(4‐chlorobenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₂ClN₃, (IV), form hydrogen‐bonded chains of rings which are themselves linked into sheets by an aromatic π–π stacking interaction. Simple hydrogen‐bonded chains built from a single N—H...O hydrogen bond are formed in 3‐tert‐butyl‐5‐(4‐nitrobenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₂N₄O₂, (VI), while in 3‐tert‐butyl‐5‐(3,4,5‐trimethoxybenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₃H₂₉N₃O₃, (VII), which crystallizes with Z′ = 2 in the space group P, pairs of molecules are linked into two independent centrosymmetric dimers, one generated by a three‐centre N—H...(O)₂ hydrogen bond and the other by a two‐centre N—H...O hydrogen bond.     

The influence of sulfur substituents on the molecular geometry and packing of thio derivatives of N‐methylphenobarbital

The room‐temperature crystal structures of four new thio derivatives of N‐methylphenobarbital [systematic name: 5‐ethyl‐1‐methyl‐5‐phenylpyrimidine‐2,4,6(1H,3H,5H)‐trione], C₁₃H₁₄N₂O₃, are compared with the structure of the parent compound. The sulfur substituents in N‐methyl‐2‐thiophenobarbital [5‐ethyl‐1‐methyl‐5‐phenyl‐2‐thioxo‐1,2‐dihydropyrimidine‐4,6(3H,5H)‐dione], C₁₃H₁₄N₂O₂S, N‐methyl‐4‐thiophenobarbital [5‐ethyl‐1‐methyl‐5‐phenyl‐4‐thioxo‐3,4‐dihydropyrimidine‐2,6(1H,5H)‐dione], C₁₃H₁₄N₂O₂S, and N‐methyl‐2,4,6‐trithiophenobarbital [5‐ethyl‐1‐methyl‐5‐phenylpyrimidine‐2,4,6(1H,3H,5H)‐trithione], C₁₃H₁₄N₂S₃, preserve the heterocyclic ring puckering observed for N‐methylphenobarbital (a half‐chair conformation), whereas in N‐methyl‐2,4‐dithiophenobarbital [5‐ethyl‐1‐methyl‐5‐phenyl‐2,4‐dithioxo‐1,2,3,4‐tetrahydropyrimidine‐6(5H)‐one], C₁₃H₁₄N₂OS₂, significant flattening of the ring was detected. The number and positions of the sulfur substituents influence the packing and hydrogen‐bonding patterns of the derivatives. In the cases of the 2‐thio, 4‐thio and 2,4,6‐trithio derivatives, there is a preference for the formation of a ring motif of the R₂²(8) type, which is also a characteristic of N‐methylphenobarbital, whereas a C(6) chain forms in the 2,4‐dithio derivative. The preferences for hydrogen‐bond formation, which follow the sequence of acceptor position 4 > 2 > 6, confirm the differences in the nucleophilic properties of the C atoms of the heterocyclic ring and are consistent with the course of N‐methylphenobarbital thionation reactions.     

Hydrogen‐bonded sheet structures in neutral,anionic and hydrated 6‐amino‐2‐(morpholin‐4‐yl)‐5‐nitrosopyrimidines

In each of 6‐amino‐3‐methyl‐2‐(morpholin‐4‐yl)‐5‐nitrosopyrimidin‐4(3H)‐one, C₉H₁₃N₅O₃, (I), morpholin‐4‐ium 4‐amino‐2‐(morpholin‐4‐yl)‐5‐nitroso‐6‐oxo‐1,6‐dihydropyrimidin‐1‐ide, C₄H₁₀NO⁺·C₈H₁₀N₅O₃⁻, (II), and 6‐amino‐2‐(morpholin‐4‐yl)‐5‐nitrosopyrimidin‐4(3H)‐one hemihydrate, C₈H₁₁N₅O₃·0.5H₂O, (III), the bond distances within the pyrimidine components are consistent with significant electronic polarization, which is most marked in (II) and least marked in (I). Despite the high level of substitution, the pyrimidine rings are all effectively planar, and in each of the pyrimidine components, there are intramolecular N—H...O hydrogen bonds. In each compound, the organic components are linked by multiple N—H...O hydrogen bonds to form sheets of widely differing construction, and in compound (III) adjacent sheets are linked by the water molecules, so forming a three‐dimensional hydrogen‐bonded framework. This study also contains the first direct geometric comparison between the electronic polarization in a neutral aminonitrosopyrimidine and that in its ring‐deprotonated conjugate anion in a metal‐free environment.     

4‐Styrylquinolines from cyclocondensation reactions between (2‐aminophenyl)chalcones and 1,3‐diketones: crystal structures and regiochemistry

Structures are reported for two matched sets of substituted 4‐styrylquinolines which were prepared by the formation of the heterocyclic ring in cyclocondensation reactions between 1‐(2‐aminophenyl)‐3‐arylprop‐2‐en‐1‐ones with 1,3‐dicarbonyl compounds. (E)‐3‐Acetyl‐4‐[2‐(4‐methoxyphenyl)ethenyl]‐2‐methylquinoline, C₂₁H₁₉NO₂, (I), (E)‐3‐acetyl‐4‐[2‐(4‐bromophenyl)ethenyl]‐2‐methylquinoline, C₂₀H₁₆BrNO, (II), and (E)‐3‐acetyl‐2‐methyl‐4‐{2‐[4‐(trifluoromethyl)phenyl]ethenyl}quinoline, C₂₁H₁₆F₃NO, (III), are isomorphous and in each structure the molecules are linked by a single C—H…O hydrogen bond to form C(6) chains. In (I), but not in (II) or (III), this is augmented by a C—H…π(arene) hydrogen bond to form a chain of rings; hence, (I)–(III) are not strictly isostructural. By contrast with (I)–(III), no two of ethyl (E)‐4‐[2‐(4‐methoxyphenyl)ethenyl]‐2‐methylquinoline‐3‐carboxylate, C₂₂H₂₁NO₃, (IV), ethyl (E)‐4‐[2‐(4‐bromophenyl)ethenyl]‐2‐methylquinoline‐3‐carboxylate, C₂₁H₁₈BrNO₂, (V), and ethyl (E)‐2‐methyl‐4‐{2‐[4‐(trifluoromethyl)phenyl]ethenyl}quinoline‐3‐carboxylate, C₂₂H₁₈F₃NO₂, (VI), are isomorphous. The molecules of (IV) are linked by a single C—H…O hydrogen bond to form C(13) chains, but cyclic centrosymmetric dimers are formed in both (V) and (VI). The dimer in (V) contains a C—H…π(pyridyl) hydrogen bond, while that in (VI) contains two independent C—H…O hydrogen bonds. Comparisons are made with some related structures, and both the regiochemistry and the mechanism of the heterocyclic ring formation are discussed.     

Novel Composites of Graphitic‐phase Nitrogen Carbon/Lanthanide Coordination Polymers as White Light‐emitting Phosphor

Lanthanide coordination polymers (Ln‐CPs) are excellent candidates for designing white light materials due to their adjustable fluorescent characteristic by decorating organic ligands, changing metal centers and including guests. However, low quantum yield, weak blue emission, high prices and supply risks have hindered the application and developments of the pure Ln‐CPs materials. Herein, we have designed a new white color composite material capable of white light‐emission upon excitation at 338 nm, which fabricated by compositing a graphitic‐phase nitrogen carbon (g‐C₃N₄) treated with nitric acid and lanthanide‐based complexes, with the photoluminescencequantum yield (QY) in solid state reaching 11.7 %. WLEDs constructed by depositing the (g‐C₃N₄)_0.783/Eu_0.133/Tb_0.083‐dbpt [dbpt = 3‐(3,5‐dicarboxylphenyl)‐5‐(pyrazinyl)‐1H‐1,2,4‐triazole] composites on a commercial UV LED chip feature a CIE chromaticity coordinate at (0.33, 0.33), high color rendering index (CRI) of 94.6. Compared to conventional white light‐emission Ln‐CPs materials of La_0.928Eu_0.045Tb_0.027‐dbpt and La_0.896Eu_0.104‐dbpt reveals that (g‐C₃N₄)_0.783/Eu_0.133/Tb_0.083‐dbpt composites have higher QY and CRI values.     

Trinuclear Phosphaferroles from Alkylidyne‐Phosphaalkyne Coupling Reactions

Reaction of bisalkylidyne cluster compounds [Fe₃(CO)₉(μ₃‐CR)₂] ( 1a—d ) ( a , R = H; b , R = F; c , R = Cl; d , R = Br) with the phosphaalkyne t‐C₄H₉‐C≡P ( 2 ) yield a single isomer of the phosphaferrole cluster [Fe₃(CO)₈][CR‐C(t‐Bu)‐P‐CR] ( 3a—d ). However, the three isomeric compounds [Fe₃(CO)₈][C(OEt)‐C(t‐Bu)‐P‐C(Me)] ( 5a ), [Fe₃(CO)₈][C(Me)‐C(t‐Bu)‐P‐C(OEt)] ( 5b ), and [Fe₃(CO)₈][C(OEt)‐C(Me)‐C(t‐Bu)‐P] ( 5c ) are obtained in the reaction of [Fe₃(CO)₉(μ₃‐CMe)(μ₃‐C‐OEt)] ( 4 ) with 2 . As the phosphaferroles 3 possess a lone pair of electrons at the phosphorus atom they can act as ligands. [Fe₃(CO)₈][CF‐C(t‐Bu)‐P‐CF]ML_n ( 7a—c ) ( a , ML_n = Cr(CO)₅; b , ML_n = CpMn(CO)₂; c , ML_n = Cp^*Mn(CO)₂) were formed from 3b and L_nM(η²‐C₈H₁₄) ( 6a—c ). The dinuclear cluster [Fe₂(CO)₆][CF‐CF‐C(t‐Bu)‐PH(OMe)] ( 8 ) was obtained from 3b and NiCl₂·6H₂O in methanol. The structures of 3a—d , 5a—c , 7b , and 8 have been elucidated by X‐ray crystal structure determinations.     

Rational Design of a Lanthanide‐Based Complex Featuring Different Single‐Molecule Magnets

The rational synthesis of the 2‐{1‐methylpyridine‐N‐oxide‐4,5‐[4,5‐bis(propylthio)tetrathiafulvalenyl]‐1H‐benzimidazol‐2‐yl}pyridine ligand ( L ) is described. It led to the tetranuclear complex [Dy₄(tta)₁₂( L )₂] ( Dy‐Dy₂‐Dy ) after coordination reaction with the precursor Dy(tta)₃?2 H₂O (tta^?=2‐thenoyltrifluoroacetonate). The X‐ray structure of Dy‐Dy₂‐Dy can be described as two terminal mononuclear units bridged by a central antiferromagnetically coupled dinuclear complex. The terminal N₂O₆ and central O₈ environments are described as distorted square antiprisms. The ac magnetism measurements revealed a strong out‐of‐phase signal of the magnetic susceptibility with two distinct sets of data. The high‐ and low‐frequency components were attributed to the two terminal mononuclear single‐molecule magnets (SMMs) and the central dinuclear SMM, respectively. A magnetic hysteresis loop was detected at very low temperature. From both structural and magnetic points of view, the tetranuclear SMM Dy‐Dy₂‐Dy is a self‐assembly of two known mononuclear SMMs bridged by a known dinuclear SMM.     

Visible‐Light‐Promoted Photocatalytic B−C Coupling via a Boron‐Centered Carboranyl Radical: Facile Synthesis of B(3)‐Arylated o‐Carboranes

A visible‐light‐mediated in situ generation of a boron‐centered carboranyl radical (o‐C₂B₁₀H₁₁ ^. ) has been described. With eosin Y as a photoredox catalyst, 3‐diazonium‐o‐carborane tetrafluoroborate [3‐N₂‐o‐C₂B₁₀H₁₁][BF₄] was converted into the corresponding boron‐centered carboranyl radical intermediate, which can undergo efficient electrophilic substitution reaction with a wide range of (hetero)arenes. This general and simple procedure provides a metal‐free alternative for the synthesis of 3‐(hetero)arylated‐o‐carboranes.     

Covalent‐assisted supramolecular synthesis: the effect of hydrogen bonding in cocrystals of 4‐tert‐butylbenzoic acid with isoniazid and its derivatized forms

A series of cocrystals of isoniazid and four of its derivatives have been produced with the cocrystal former 4‐tert‐butylbenzoic acid via a one‐pot covalent and supramolecular synthesis, namely 4‐tert‐butylbenzoic acid–isoniazid, C₆H₇N₃O·C₁₁H₁₄O₂, 4‐tert‐butylbenzoic acid–N′‐(propan‐2‐ylidene)isonicotinohydrazide, C₉H₁₁N₃O·C₁₁H₁₄O₂, 4‐tert‐butylbenzoic acid–N′‐(butan‐2‐ylidene)isonicotinohydrazide, C₁₀H₁₃N₃O·C₁₁H₁₄O₂, 4‐tert‐butylbenzoic acid–N′‐(diphenylmethylidene)isonicotinohydrazide, C₁₉H₁₅N₃O·C₁₁H₁₄O₂, and 4‐tert‐butylbenzoic acid–N′‐(4‐hydroxy‐4‐methylpentan‐2‐ylidene)isonicotinohydrazide, C₁₂H₁₇N₃O₂·C₁₁H₁₄O₂. The co‐former falls under the classification of a `generally regarded as safe' compound. The four derivatizing ketones used are propan‐2‐one, butan‐2‐one, benzophenone and 3‐hydroxy‐3‐methylbutan‐2‐one. Hydrogen bonds involving the carboxylic acid occur consistently with the pyridine ring N atom of the isoniazid and all of its derivatives. The remaining hydrogen‐bonding sites on the isoniazid backbone vary based on the steric influences of the derivative group. These are contrasted in each of the molecular systems.