首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
Antimicrobial polymers have been widely reported to exert strong biocidal effects against bacteria. In contrast with antimicrobial polymers with aliphatic ammonium groups, polymers with anilinium groups have been rarely studied and applied as biocidal materials. In this study, a representative polymer with aniline side functional groups, poly(N,N‐dimethylaminophenylene methacrylamide) (PDMAPMA), was explored as a novel antimicrobial polymer. PDMAPMA was synthesized and its physicochemical properties evaluated. The methyl iodide‐quaternized polymer was tested against the Gram‐positive Staphylococcus aureus, with a minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of 16–32 and 64–128 μg mL?1, respectively. Against the Gram‐negative Escherichia coli, the MIC and MBC were both 64–128 μg mL?1. To broaden the range of applications, PDMAPMA was coated on substrates via crosslinking to endow the surface with contact‐kill functionality. The effect of charge density of the coatings on the antimicrobial behavior was then investigated, and stronger biocidal performance was observed for films with higher charge density. This study of the biocidal behavior of PDMAPMA both in solution and as coatings is expected to broaden the application of polymers containing aniline side groups and provide more information on the antimicrobial behavior of such materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1908–1921  相似文献   

2.
Porous polymer microspheres (PPMs) have been widely applied in various biomedical fields. Herein, the self‐assisted preparation of poly(ester‐thioether)‐based porous microspheres and hierarchical microcages, whose pore sizes can be controlled by varying the polymer structures, is reported. Poly(ester‐thioether)s with alkyl side chains (carbon atom numbers were 2, 4, and 8) can generate hollow porous microspheres; the longer alkyl chain length, the larger pore size of microspheres. The allyl‐modified poly(ester‐thioether) (PHBDT‐g‐C3) can form highly open, hierarchically interconnected microcages. A formation mechanism of these PPMs is proposed; the hydrophobic side chains‐mediated stabilization of oil droplets dictate the droplet aggregation and following solvent evaporation, which is the key to the formation of PPMs. The hierarchically interconnected microcages of PHBDT‐g‐C3 are due to the partially crosslinking of polymers. Pore sizes of PPMs can be further tuned by a simple mixing strategy of poly(ester‐thioether)s with different pore‐forming abilities. The potential application of these PPMs as H2O2‐responsive vehicles for delivery of hydrophobic (Nile Red) and hydrophilic (doxorubicin hydrochloride) cargos is also investigated. The microspheres with larger pore sizes show faster in vitro drug release. The poly(ester‐thioether)‐based polymer microspheres can open a new avenue for the design of PPMs and provide a H2O2‐responsive drug delivery platform.  相似文献   

3.
O‐Methacryloyl‐N‐(tert‐butoxycarbonyl)‐β‐hydroxyaspartic acid dimethyl ester was synthesized by methyl esterification of β‐hydroxyaspartic acid, followed by protection of the amino group with the tert‐butoxycarbonyl group and then the reaction of the hydroxyl group with methacryloyl chloride. The monomer efficiently underwent radical polymerization to afford the corresponding polymer with a number‐average molecular weight of 42,000 in good yields. The alkaline hydrolysis of the polymer occurred not only at the methyl ester but also at the ester moiety between the main and side chains of the polymer. The methyl ester‐free polymer gradually released β‐hydroxyaspartic acid moiety in a phosphate buffer solution with pH = 7.3 and 7.8. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2782–2788, 2002  相似文献   

4.
Some new molecularly imprinted polymers (MIPs) were prepared by different protocols involving vanillin as the imprinted molecule, methacrylic acid (= 2‐methylprop‐2‐enoic acid; MAA) as the functional monomer, and ethylene glycol dimethacrylate (EGDMA = 2‐methylprop‐2‐enoic acid ethane‐1,2‐diyl ester) as the cross‐linking agent. The adsorption property of the imprinted polymers was studied by UV spectrophotometry and HPLC. The results indicated that the porogen solvent had a certain influence on the adsorption performance of the polymer. The vanillin‐imprinted polymer MIP1 prepared with MeOH as porogen, exhibited advantageous characteristics, i.e., a high binding activity, a good selectivity, and a rapid adsorption equilibrium. The binding parameters studied by Scatchard analysis established that there are two types of binding sites in MIP1. Finally, by packing an SPE column (SPE = solid‐phase extraction) with the polymer MIP1, the vanillin was separated and enriched successfully by this sorbent from the samples of Vanilla fragrans and beer.  相似文献   

5.
This work describes synthesis of antimicrobial methacrylate copolymers by reversible addition‐fragmentation chain transfer (RAFT) polymerization and examines the versatility of this approach for improving chemical optimization to create potent, non‐toxic antimicrobial polymers. Specifically, this study focuses on the radical‐mediated transformation of end group of antimicrobial peptide‐mimetic polymer. RAFT polymerization using 2‐cyano‐2‐yl‐dithiobenzoate provided a statistical methacrylate copolymer consisting of aminobutyl and ethyl groups in the side chains. The following radical‐mediated modification using free radical initiators successfully transformed the ω‐end group of parent copolymer from dithiobenzoate to a cyanoisobutyl or aminoethyl cyanopentanoate group without any significant changes to the polymer molecular weight. In general, the parent polymer and variants showed a broad spectrum of activity against a panel of bacteria, but low hemolytic activity against human red blood cells. The parent copolymer with the dithiobenzoate end‐group showed highest antimicrobial and hemolytic activities as compared with other copolymers. The copolymers caused membrane depolarization in Staphylococcus aureus, while the ability of copolymers for membrane disruption is not dependent on the end‐group structures. The synthetic route reported in this study will be useful for further study of the role of polymer end‐groups in the antimicrobial activity of copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 304–312  相似文献   

6.
Biomaterials based on non‐active polymers functionalized with antimicrobial agents by covalent modification or mixing are currently regarded as high potential solutions to prevent biomaterial associated infections that are major causes of biomedical device failure. Herewith a strategy is proposed in which antimicrobial materials are prepared by simply mixing‐and‐matching of ureido‐pyrimidinone (UPy) based supramolecular polymers with antimicrobial peptides (AMPs) modified with the same UPy‐moiety. The N‐terminus of the AMPs was coupled in solution to an UPy‐carboxylic acid synthon resulting in formation of a new amidic bond. The UPy‐functionalization of the AMPs did not affect their secondary structure, as proved by circular dichroism spectroscopy. The antimicrobial activity of the UPy‐AMPs in solution was also retained. In addition, the incorporation of UPy‐AMPs into an UPy‐polymer was stable and the final material was biocompatible. The addition of 4 mol % of UPy‐AMPs in the UPy‐polymer material protected against colonization by Escherichia coli, and methicillin‐sensitive and ‐resistant strains of Staphylococcus aureus. This modular approach enables a stable but dynamic incorporation of the antimicrobial agents, allowing at the same time for the possibility to change the nature of the polymer, as well as the use of AMPs with different activity spectra. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1926–1934  相似文献   

7.
Active antimicrobial packaging is a promising form of active packaging that can kill or inhibit microorganism growth in order to maintain product quality and safety. One of the most common approaches is based on the release of volatile antimicrobial agents from the packaging material such as essential oils. Due to their highly volatile nature, the challenge is to preserve the essential oils during the high‐temperature melt processing of the polymer, while maintaining high antimicrobial activity for a desired shelf life. This study suggests a new approach in order to achieve this goal. Antimicrobial active films are developed based on low‐density polyethylene (LDPE), organo‐modified montmorillonite clays (MMT) and carvacrol (used as an essential oil model). In order to minimize carvacrol loss throughout the polymer compounding, a pre‐compounding step is developed in which clay/carvacrol hybrids are produced. The hybrids exhibit a significant increase in the d‐spacing of clay and enhanced thermal stability. The resulting LDPE/(clay/carvacrol) films exhibit superior and prolonged antibacterial activity against Escherichia coli and Listeria innocua, while polymer compounded with pure carvacrol loses the antibacterial properties within days. The films also present an excellent antifungal activity against Alternaria alternata, used as a model plant pathogenic fungus. Furthermore, infrared spectroscopy analysis of the LDPE/(clay/carvacrol) system displayed significantly higher carvacrol content in the film as well as a slower out‐diffusion of the carvacrol molecules in comparison to LDPE/carvacrol films. Thus, these new films have a high potential for antimicrobial food packaging applications due to their long‐lasting and broad‐spectrum antimicrobial efficacy. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

8.
A simple, robust, and eco‐friendly technique for the fabrication of functionalized Jeffamine polymer in an aqueous medium is developed. The polymer is prepared by post polymerization modification of Jeffamine ED‐2003 of molecular weight 2000. The structure of the modified polymer was studied in detail using FTIR and NMR (1H and 13C NMR) spectroscopic methods. The thermal properties and degradation of the polymer were examined by DSC and TGA techniques. The polymer exhibited glass transition temperature (Tg) at 115°C. The functionalized polymeric compound showed good antimicrobial activity against gram‐negative bacterium Escherichia coli, a tubercular variant Mycobacterium smegmatis, and gram‐positive bacterium Staphylococcus aureus with a zone of inhibition of 6 to 12, 9, and 5 to 9 mm diameter, respectively. The compound also showed good activity against the fungus, Candida albicans, with a zone of inhibition of 6 to 11 mm diameter. The morphology of the polymer films and interaction of the microbes with functionalized Jeffamine polymer were investigated by using scanning electron microscopy (SEM).  相似文献   

9.
Viscoelastic properties of urethane and ester conjugation cardo polymers that contain fluorene group, 9,9‐bis(4‐(2‐hydroxyethoxy)phenyl)fluorene (BPEF), were investigated. As for the urethane‐type cardo polymers containing BPEF in the main chain, it had a high glass‐transition temperature (Tg), which was observed as the α dispersion on viscoelastic measurement, and its temperature depended on the chemical structure of the spacing unit, such as toluene diisocyanate (TDI), 4,4′‐methylene diphenyl diisocyanate (MDI), methylene dicycloexyl diisocyanate (CMDI), and hexamethylene diisocyanate (HDI). Moreover, the Tg of urethane‐type cardo copolymers with various cardo contents increased with an increase of cardo content. Owing to the increase of Tg of cardo polymers, another molecular motion can be measured at the temperature between the α and β dispersion that was assigned to the molecular motion of urethane conjugation unit around 200 K, and it was referred to as the αsub dispersion. The peak temperature of the αsub dispersion was influenced by the chemical structure of the spacing unit, but it did not change for the cardo polymer containing the same spacing unit. Consequently, it was deduced that the αsub dispersion was originated in the subsegmental molecular motions of the cardo polymers. Ester‐type cardo polymer had higher Tg in comparison with noncardo polymer that consisted of dimethyl groups (BPEP) instead of BPEF as well. The αsub dispersion was also measured at the temperature between the α and β dispersion, which was assigned to the molecular motion of ester conjugation unit, around 220 K. For ester cardo polymer, the γ dispersion was measured in a low‐temperature region around 140 K, and it was due to a small unit motion in the ester‐type cardo polymers, such as ethoxyl unit, ? C2H4O? . Moreover, the intensity of the γ dispersion of noncardo polymer was higher than that of cardo polymer, which means the molecular motion was much restricted by the cardo structure of BPEF. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2259–2268, 2005  相似文献   

10.
We report a potential coating material showing durable and significant antimicrobial activity for preserving the surfaces of a broad range of materials. The structure of the prepared antimicrobial adhesive material features a catechol moiety of dopamine hydrochloride conjugated to 4‐bromobutanoyl chloride as an adhesive material. Antimicrobial properties against a wide range of microorganism species are achieved by quaternizing a long hydrophobic chain (N,N'‐dimethyldecylamine) onto 3,4‐dihydroxyphenylalanine (Dopa) to afford the prepared material (Dopa‐decyl). The successful formation of Dopa‐decyl is confirmed by hydrogen nuclear magnetic resonance (1H‐NMR) and attenuated total reflectance‐infrared (ATR‐IR) measurements. The chemical composition of the quaternized adhesive material (Dopa‐decyl) is characterized by X‐ray photoelectron spectroscopy (XPS). Investigation of the antimicrobial activity of the Dopa‐decyl‐coated film against both gram‐positive Staphylococcus aureus (S. aureus) and gram‐negative Escherichia coli (E. coli) stains reveals a highly efficient antimicrobial effect under both normal and extreme stress conditions due to the biocidal effect of the quaternized amine when the materials are applied on the surface of various substrates. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

11.
We present here design and synthesis of very efficient, high‐yielded and simple approach of a series of C4‐linked coumarin–hypoxanthine pharmacophores 1 ( a–j ) with moderate to excellent in vitro antimicrobial activity. According to earlier studies, potential modification at C4‐position of coumarin ring provided excellent bioactive molecules. All the titled compounds were characterized by spectroscopic and elemental analyses. Titled compounds have been developed via systematic tuning of coumarin ring substitutions, which are prepared from the well‐known Pechmann condensation reaction. The addition of a pendent nucleobase in hypoxanthine group improved the in vitro antimicrobial activity. Computational studies were also mimicking the potent biomolecules. A good pharmacokinetic profile is suggested by theoretical calculation of absorption, distribution, metabolism, and excretion properties. Therefore, synthesis of these titled compounds provided an insight towards better antimicrobial agents.  相似文献   

12.
A new donor‐acceptor copolymer, containing benzodithiophene (BDT) and methyl thiophene‐3‐carboxylate (3MT) units, is designed and synthesized for polymer solar cells (PSCs). The 3MT unit is used as an electron acceptor unit in this copolymer to provide a lower highest occupied molecular orbital (HOMO) level for obtaining polymer solar cells with a higher open‐circuit voltage (VOC). The resulting bulk heterojunction PSC made of the copolymer and [6,6]‐phenyl‐C71‐butyric acid methyl ester (PC71BM) exhibits a power conversion efficiency (PCE) up to 4.52%, a short circuit current (JSC) of 10.5 mA·cm‐2, and a VOC of 0.86 V.  相似文献   

13.
The nucleophilic substitution reaction of poly(dichlorophosphazene) with sodium 2‐methoxyethoxide and glycine ethyl ester has been studied in detail. Polymers prepared with different methods have been characterized by 1H NMR, and the results reveal that the addition sequence of the two nucleophilic reagents is an important factor in determining the structure of the resultant polymer. If alkyl ether is added first, the subsequently introduced amino acid ester not only reacts with residual P? Cl but also attacks the alkyl ether side units present by replacing either the whole group or just ? OCH3. As a result, a new kind of side group (? OCH2CH2NHCH2COOC2H5) can be detected in the macromolecule. To obtain polymers with desired compositions {poly[(methoxyethoxy)x(ethylglycino)yphosphazene]}, the amino acid ester should be introduced initially to react with poly(dichlorophosphazene), and it should be followed by the alkyl ether. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2417–2425, 2005  相似文献   

14.
Nine guanidinylated amphiphilic polycarbonates are rationally designed and synthesized. Each polymer has the same biodegradable backbone but different side groups. The influence of the hydrophobic/hydrophilic effect on antimicrobial activities and cytotoxicity is systematically investigated. The results verify that tuning the length of the spacer arm between the cationic guanidine group and the polycarbonate backbone is an efficient design strategy to alter the hydrophobic/hydrophilic balance without changing the cationic charge density. A spacer arm of six methylene units (CH2)6 shows the best antimicrobial activity (minimum inhibitory concentration, MIC = 40 µg mL?1 against Escherichia coli, MIC = 20 µg mL?1 against Staphylococcus aureus, MIC = 40 µg mL?1 against Candida albicans) with low hemolytic activity (HC50 > 2560 µg mL?1). Furthermore, the guanidinylated polycarbonates exhibit the ability to self‐assemble and present micelle‐like nanostructure due to their intrinsic amphiphilic macromolecular structure. Transmission electron microscopy and dynamic light scattering measurements confirm polymer micelle formation in aqueous solution with sizes ranging from 82 to 288 nm.  相似文献   

15.
Gramicidin A is a natural peptide, which shows high antimicrobial activity to Gram‐positive bacteria. However, the hemolytic toxicity prevents its therapeutic usage. We demonstrated that by simply removing the formyl group at the N terminus, the hemolytic toxicity of the peptide could be obviously decreased. The deformylated gramicidin A ( 1 ) could efficiently insert into the lipid bilayer to form transmembrane channels. The peptide can also selectively insert into the membrane of Gram‐positive bacteria but not that of erythrocytes, leading to its high antimicrobial activity and very low hemolytic toxicity. The derivation of 1 could be achieved by decoration at the terminal NH2 group, which also produced peptides showing high activity and low hemolytic toxicity. This derivation method provided us with an efficient strategy to build a library for future activity and cytotoxicity screening in vitro and in vivo.  相似文献   

16.
Starting from 3,5‐diamino benzoic acid, 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzyl ether, an AB2‐type blocked isocyanate monomer with flexible ether group, and 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzoate, an AB2‐type blocked isocyanate monomer with ester group, were synthesized for the first time. Using the same starting compound, 3,5‐bis{(benzoxycarbonyl)imino}benzylalcohol, an AB2‐type blocked isocyanate monomer, was synthesized through a highly efficient short‐cut route. Step‐growth polymerization of these monomers at individually optimized experimental conditions results in the formation of hyperbranched polyurethanes with and without ether and ester groups. Copolymerizations of these monomers with functionally similar AB monomers were also carried out. The molecular weights of the polymers were determined using GPC and the values (Mw) were found to vary from 1.5 × 104 to 1.2 × 106. While hyperbranched polyurethanes having no ether or ester group were found to be thermally stable up to 217 °C, hyperbranched poly(ether–urethane)s and poly(ester–urethane)s were found to be thermally stable up to 245 and 300 °C, respectively. Glass transition temperature (Tg) of polyurethane was reduced significantly when introducing ether groups into the polymer chain, whereas Tg was not observed even up to 250 °C in the case of poly(ester–urethane). Hyperbranched polyurethanes derived from all the three different AB2 monomers were soluble in highly polar solvents and the copolymers showed improved solubility. Polyethylene glycol monomethyl ether of molecular weight 550 and decanol were used as end‐capping groups, which were seen to affect the thermal, solution, and solubility properties of polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3877–3893, 2007  相似文献   

17.
Alkylation of quinoxaline scaffold 1 in the presence of K2CO3 preferred N‐alkylation than O‐alkylation. Quinoxaline hydrazide 6 was successfully coupled with various amino acids, esters, and amines via azide‐coupling method. New heterocyclic compounds containing quinoxaline linked to 1,3,4‐oxadiazolethione or pyrazole were obtained from cyclization of 6 with CS2 and acetylacetone, respectively. A series of hydrazide Schiff's bases were formed from hydrazide 6 by condensation with a set of aldehydes and ketones. NMR spectroscopy and mass spectrometry were used for structure elucidation of new compounds. The antimicrobial activity of the synthesized compounds was investigated toward two wild‐type bacterial strains (Staphylococcus aureus and Escherichia coli ) and two fungal species (Alternaria brassicicola and Fusarium oxysporum ). Four compounds displayed a significant activity toward S. aureus . The ester 4 showed higher activity than the standard drugs, which make it a promising lead compound.  相似文献   

18.
Statistical and block all‐siloxane copolymers containing quaternary ammonium salt (QAS) groups with biocidal activity as lateral substituents were synthesized as models for the study of the effect of the arrangement of the QAS groups in the copolymer chain on their antimicrobial activity. The bioactive siloxane unit was [3‐n‐octyldimethylammoniopropyl]methylsiloxane, and the neutral unit was dimethylsiloxane. The copolymers also contained siloxane units with unreacted precursor 3‐chloropropyl or 3‐bromopropyl groups. A small number of units containing highly hydrophilic 3‐(3‐hydroxypropyl‐dimethylammonio)propyl groups were introduced to increase the solubility of the copolymers in water. The bioactive and bioneutral units were arranged in the polymer chain either in blocks or in statistical order. The block copolymers differed in the number and length of segments. The copolymers were obtained by the quaternization of tertiary amines by chloropropyl or bromopropyl groups attached to polysiloxane chains. The arrangement of the bioactive groups was controlled by the arrangement of the halogenopropyl groups in the bioactive copolymer precursor. All model siloxane copolymers showed high bactericidal activity in a water solution toward the gram‐negative bacteria Escherichia coli and the gram‐positive bacteria Staphylococcus aureus. However, no essential differences in the activities of the copolymers with block and statistical arrangements of units were detected. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2939–2948, 2003  相似文献   

19.
A novel concept to obtain the deep‐ultraviolet (DUV) nonlinear optical (NLO) materials is proposed based on the assembling of one‐dimensional (1D) polar motifs into quasi‐1D polymer patterns. Based on the first‐principles calculations, we have successfully discovered an excellent DUV NLO polymer, i.e., poly(difluorophosphazene), with the chemical formula of (PNF2)n. Calculations reveal that PNF2 has a larger band gap, a stronger second harmonic generation effect, a larger birefringence, and a shorter phase‐matching cutoff than KBe2BO3F2. These findings not only demonstrate that the PNF2 is the first reported DUV NLO polymer, but also could open a new direction to discover novel DUV NLO materials in polymer systems.  相似文献   

20.
《Electroanalysis》2018,30(2):328-335
Method that could regulate the ion transport in nanochannel in an efficient and rapid manner is still a challenge. Here, we introduced enzyme‐catalysis‐induced polymer growth in nanochannels to develop a new method to regulate the ion transport and evaluate the enzyme catalysis kinetics in nano‐space. As a model enzyme, Horseradish peroxidase (HRP) was immobilized in the nanochannels through a volume‐controlled‐drying method. In the presence of H2O2, HRP catalyzed o‐phenylenediamine (o‐PD) to trigger its polymer growth, in turn blocked the ion transport and led to the decrease of the ion current. Taking advantages of the high efficiency of enzyme catalysis and the nano‐confinement of nanochannels, the system readily achieved blocking ratios of ion current even reaching 99.6 % of the initial. Based on above concept, we developed a new method to evaluate the enzyme catalysis kinetics in nano‐confined space. By comparing with those in free state in solution and absorbed on planar surface, HRP confined in nanochannels presented similar apparent Michaelis constant (Km) values for the substrate H2O2 but much higher Km values for the substrate o‐PD, due to the steric hindrance and diffusion suppression. The enzyme‐catalysis‐induced polymerization in nanochannels might lead to new concept for the nano‐blocking/switching and provide a new platform for single molecule analysis and detection.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号