Janus balance of amphiphilic colloidal particles

We introduce the notion of "Janus balance" (J), defined as the dimensionless ratio of work to transfer an amphiphilic colloidal particle (a "Janus particle") from the oil-water interface into the oil phase, normalized by the work needed to move it into the water phase. The J value can be calculated simply from the interfacial contact angle and the geometry of Janus particles, without the need to know the interfacial energy. It is demonstrated that Janus particles of the same chemical composition but different geometries will have the highest adsorption energy when J = 1. Even for particles of homogeneous chemical makeup, the Janus balance concept can be applied when considering the contact angle hysteresis in desorbing the particle from equilibrium into the water or oil phase. The Janus balance concept may enable predictions of how a Janus particle behaves with respect to efficiency and function as a solid surfactant, as the Janus balance of solid surfactants is the analog of the classical hydrophile-lipophile balance of small surfactant molecules.     

Fabrication, properties and applications of Janus particles

Although the concept of Janus particles was raised in the early 1990s, the related research has not attracted considerable interest until recently due to the special properties and applications of these colloidal particles as well as the advances in new fabrications. Janus particles can be divided into three categories: polymeric, inorganic, and polymeric-inorganic, and each kind of Janus particles can be spherical, dumbbell-like, half raspberry-like, cylindrical, disk-like, or any of a variety of other shapes. Different Janus particles may share common preparation principles or require specific fabrication processes, and may have different assembly behaviours and properties. This critical review discusses the main fabrication methods of the three kinds of Janus particles, and then highlights the important properties and applications of these Janus particles developed in recent years, and finally proposes some perspectives on the future of Janus particle research and development.     

Strictly Biphasic Soft and Hard Janus Structures: Synthesis,Properties, and Applications

Janus structures, named after the ancient two‐faced Roman god Janus, comprise two hemistructures (e.g. hemispheres) with different compositions and functionalities. Much research has been carried out over the past few years on Janus structures because of the intriguing properties and promising potential applications of these unusually shaped materials. This Review discusses recent progress made in the synthesis, properties, and applications of strictly biphasic Janus structures possessing symmetrical structures but made of disparate materials. Depending on the chemical compositions, such biphasic structures can be categorized into soft, hard, and hybrid soft/hard Janus structures of different architectures, including spheres, rodlike, disclike, or any other shape. The main synthetic routes to soft, hard, and hybrid soft/hard Janus structures are summarized and their unique properties and applications are introduced. The perspectives for future research and development are also described.     

Facile, solution-based synthesis of soft, nanoscale janus particles with tunable janus balance

We present a novel, versatile, and simple solution-based routine to produce soft, nanosized Janus particles with tunable structural and physical properties at high volume yield. This process is based on the cross-linking of compartments within precisely defined multicompartment micelles (MCMs), which are themselves formed by the self-assembly of ABC triblock terpolymers. Therein, the C blocks form the stabilizing corona emanating from B compartments, which in turn reside on an A core. Cross-linking of the B compartments allows to permanently fixate the phase-separated state and dissolution in a good solvent for all blocks breaks up the MCMs into single Janus particles. They now consist of a core of cross-linked B blocks and two phase-separated hemispheres of A and C. The process gives access to unprecedented structural features such as tunable core diameter and control over the Janus balance ranging from dominant A side to equal hemispheres to dominant C side. We demonstrate that this simple one-pot approach can be extended to a range of triblock terpolymers with different block lengths and block chemistries to furnish a library of tailor-made Janus particles with widely tunable physical properties. Such a diversity and simplicity has remained unreachable with our previously developed approach using the controlled cross-linking of bulk morphologies. We show that this new synthetic route can be upscaled to a high volume yield of 10 wt %, thereby enabling large-scale applications. We further demonstrate the effect of the Janus balance on colloidal self-assembly. Janus particles with a dominant hydrophobic and a small hydrophilic patch aggregate into large clusters in water, but merely di- or trimerize in chloroform.     

两亲性Janus粒子在蜂窝状多孔聚合物膜上的自组装性能

采用具有两亲性的两面体(Janus)粒子实现稳定的粒子界面组装与水滴模板法自组装过程相结合的方法获得了粒子在蜂窝状多孔聚合物薄膜内壁的高效定向修饰.通过与均质粒子组装形貌的对比,证明了Janus粒子因其特殊的界面自组装活性,可以获得高粒子加量条件下的规则多孔结构,解决了使用均质粒子时存在的结构有序性和粒子修饰密度之间的矛盾.而在较低粒子加量的条件下,Janus粒子也展示出与均质粒子极为不同的组装形貌.这一方法的建立,为新型表面功能化材料的制备提供了一个新的思路.     

配体链包覆纳米粒子的表面相分离及自组装的模拟研究

通过耗散粒子动力学方法,模拟了二元配体链包覆的纳米粒子表面的相分离行为,并与现有的模拟和实验体系进行对比.研究结果印证了相分离驱动力是配体链错位所导致的构象熵的结论.进一步以相分离得到的Janus和三嵌段Janus结构纳米粒子作为构筑单元,研究了其在选择性溶剂中的自组装行为.结果表明,Janus粒子易自组装成为双层囊泡结构,而三嵌段Janus粒子则更易形成单层囊泡结构.对于从配体链包覆的纳米粒子出发,设计具有特殊功能的囊泡提供了理论支持.     

Generation of a Hydrophobic Protrusion on Nanoparticles to Improve the Membrane-Anchoring Ability and Cellular Internalization

Controlling the nanoparticle-cell membrane interaction to achieve easy and fast membrane anchoring and cellular internalization is of great importance in a variety of biomedical applications. Here we report a simple and versatile strategy to maneuver the nanoparticle-cell membrane interaction by creating a tunable hydrophobic protrusion on Janus particles through swelling-induced symmetry breaking. When the Janus particle contacts cell membrane, the protrusion will induce membrane wrapping, leading the particles to docking to the membrane, followed by drawing the whole particles into the cell. The efficiencies of both membrane anchoring and cellular internalization can be promoted by optimizing the size of the protrusion. In vitro, the Janus particles can quickly anchor to the cell membrane in 1 h and be internalized within 24 h, regardless of the types of cells involved. In vivo, the Janus particles can effectively anchor to the brain and skin tissues to provide a high retention in these tissues after intracerebroventricular, intrahippocampal, or subcutaneous injection. This strategy involving the creation of a hydrophobic protrusion on Janus particles to tune the cell-membrane interaction holds great potential in nanoparticle-based biomedical applications.     

Breaking symmetry toward nonspherical Janus particles based on polyhedral oligomeric silsesquioxanes: molecular design, "click" synthesis, and hierarchical structure

The design, synthesis, and self-assembly of a series of precisely defined, nonspherical, polyhedral oligomeric silsesquioxane (POSS)-based molecular Janus particles are reported. The synthesis aims to fulfill the "click" philosophy by using thiol-ene chemistry to efficiently install versatile functionalities on one of the POSS cages. In such a way, both the geometrical and chemical symmetries were broken to create the Janus feature. These particles self-organize into hierarchically ordered supramolecular structures in the bulk. For example, the Janus particle with isobutyl groups on one POSS and carboxylic groups on the other self-assembles into a bilayered structure with head-to-head, tail-to-tail arrangements of each particle, which further organize into a three-dimensional orthorhombic lattice. While the ordered structure in the layers was lost upon heating via a first-order transition, the bilayered structure persisted throughout. This study provides a model system of well-defined molecular Janus particles for the general understanding of their self-assembly and hierarchical structure formation in the condensed state.     

Ferrocenyl amphiphilic Janus dendrimers as redox‐responsive micellar carriers

Amphiphilic Janus dendrimers have attracted increasing attention due to their asymmetric structures and various functional properties compared to the conventional symmetric macromolecules. Herein, a novel ferrocenyl‐terminated amphiphilic Janus dendrimer containing nine hydrophilic triethylene glycol branches was synthesized by two synthetic routes, namely the typical chemo selective coupling method and the mixed modular approach. Chemical redox triggers, namely Fe₂(SO₄)₃ as oxidant and ascorbic acid as reductant, could regulate the self‐assembly behavior of the Janus dendrimer in water through the redox‐switching between ferrocene and ferricinium cations, and the change of micelles formed were investigated and confirmed through scanning electron microscopy and dynamic light scattering. The cargo‐loading property of the micelles self‐assembled by the Janus dendrimer was further proved by the successful fabrication of Rhodamine B (RhB)‐loaded micelles, and the oxidation‐triggered release behavior of the encapsulated RhB could be mediated by changing the concentration of oxidants. This work provides an effective approach to prepare ferrocenyl‐terminated amphiphilic Janus dendrimers and the self‐assembled micelles might be used as a promising molecular carrier in areas such as drug delivery and catalysis.     

Janus复合材料调控界面

Janus材料集成不同组成/功能于一体,具有明确的空间分区特征,是一类特殊的高分子复合功能材料.有机高分子链提供亲水/亲油及响应特性,无机组成提供丰富的光、电、磁、热等功能性.两亲性的Janus材料在高效稳定界面同时,还能赋予界面功能性并可在外场作用下实现操控.本文重点总结了不同结构和功能的Janus材料在稳定界面和调控界面的近期主要进展,包括聚集行为、固体乳化剂、界面增容、界面催化、功能涂层、细胞诊断与治疗等方面.     

One-step inversion process to a Janus emulsion with two mutually insoluble oils

High internal phase ratio (HIPR) aqueous Janus emulsions of two immiscible oils, silicone oil (SO) and a vegetable oil (VO), were prepared using a vibration mixer. The simple HIPR Janus emulsions, (VO + SO)/W, were found at weight fractions of the aqueous phase in excess of 0.3, while at a corresponding fraction of 0.1, a triple emulsion was obtained with the Janus emulsion forming a drop inside the vegetable oil to give a double Janus emulsion, (VO + SO)/W/VO, which in turn formed drops in the silicone oil resulting in a triple Janus emulsion (VO + SO)/W/VO/SO. Increasing the aqueous-phase fraction from 0.1 to 0.3 consequently meant an inversion, of which one intermediate stage was observed: a more complex configuration, e.g., one in which large SO drops with highly distorted VO drops attached were dispersed in a regular aqueous emulsion with spherical Janus (VO + SO) drops. A preliminary investigation was made into the destabilization process of the triple emulsions.     

Screw dislocation-induced pyramidal crystallization of dendron-like macromolecules featuring asymmetric geometry

We report herein that dendron-shaped macromolecules AB_n crystallize into well-ordered pyramid-like structures from mixed solvents, instead of spherical motifs with curved structures, as found in the bulk. The design of the asymmetric molecular architecture and the choice of mixed solvents are applied as strategies to manipulate the crystallization process. In mixed solvents, the solvent selection for the Janus macromolecule and the existence of dominant crystalline clusters contribute to the formation of flat nanosheets. Whereas during solvent evaporation, the bulkiness of the asymmetric macromolecules easily creates defects within 2D nanosheets which lead to their spiral growth through screw dislocation. The size of the nanosheets and the growth into 2D nanosheets or 3D pyramidal structures can be regulated by the solvent ratio and solvent compositions. Moreover, macromolecules of higher asymmetry generate polycrystals of lower orderliness, probably due to higher localized stress.

The dendron-shaped macromolecules AB_n crystallize into well-ordered pyramid-like structures from mixed solvents, which is on the contrary to spherical motifs with curved structures in bulk.     

聚合物接枝Janus纳米片形变的耗散粒子动力学研究

由于在检测、药物输运、分子马达等领域具有广阔的应用前景,二维柔性响应Janus材料受到了广泛的关注。但遗憾的是,这些二维材料的响应形变的分子机理仍不明确。基于此,我们采用介观尺度的耗散粒子动力学模拟方法系统研究了Janus纳米片两侧接枝不同长度和不同溶剂相容性的高分子链对Janus纳米片形变的影响。我们发现由于构象熵和混合焓的共同作用,通过对接枝链长度和溶剂相容性的调整,Janus纳米片可以形成如反相包覆、信封装包覆和碗状等新奇的结构。我们的理论结果首次提供了对二维柔性Janus材料可控形变的基本认识,并预报了设计合成新型Janus纳米器件在药物和生物医学领域的潜在应用。     

Janus Nanoparticles: Preparation,Characterization, and Applications

In chemical functionalization of colloidal particles, the functional moieties are generally distributed rather homogeneously on the particle surface. Recently, a variety of synthetic protocols have been developed in which particle functionalization may be carried out in a spatially controlled fashion, leading to the production of structurally asymmetrical particles. Janus particles represent the first example in which the two hemispheres exhibit distinctly different chemical and physical properties, which is analogous to the dual‐faced Roman god, Janus. Whereas a variety of methods have been reported for the preparation of (sub)micron‐sized polymeric Janus particles, it has remained challenging for the synthesis and (unambiguous) structural characterization of much smaller nanometer‐sized Janus particles. Herein, several leading methods for the preparation of nanometer‐sized Janus particles are discussed and the important properties and applications of these Janus nanoparticles in electrochemistry, sensing, and catalysis are highlighted. Some perspectives on research into functional patchy nanoparticles are also given.     

Fabrication of a composite colloidal particle with unusual janus structure as a high-performance solid emulsifier

Core-shell particles with cross-linked core and shell were used as seed particles to produce composite Janus particles. It was found that when the shell has distinctly higher cross-linking degree than the core, Janus particles with very unusual structures can be obtained. These particles have two parts, with one part embraced partially or entirely by the other part, adjustable by parameters such as phase ratio or cross-linking degree. On the basis of experimental observations, a possible mechanism for the formation of such unusual Janus particles has been proposed. Janus particles with arms are used to emulsify water-toluene mixtures, forming oil-in-water (O/W) emulsions at very high internal phase content with rather low concentration of particles. Nonspherical emulsion droplets were observed, indicating that these Janus particles are likely to jam at the interface, forming a strong protecting layer to stabilize emulsions.     

Amphiphilic Janus Gold Nanoparticles Prepared by Interface‐Directed Self‐Assembly: Synthesis and Self‐Assembly

Materials with Janus structures are attractive for wide applications in materials science. Although extensive efforts in the synthesis of Janus particles have been reported, the synthesis of sub‐10 nm Janus nanoparticles is still challenging. Herein, the synthesis of Janus gold nanoparticles (AuNPs) based on interface‐directed self‐assembly is reported. Polystyrene (PS) colloidal particles with AuNPs on the surface were prepared by interface‐directed self‐assembly, and the colloidal particles were used as templates for the synthesis of Janus AuNPs. To prepare colloidal particles, thiol‐terminated polystyrene (PS‐SH) was dissolved in toluene and citrate‐stabilized AuNPs were dispersed in aqueous solution. Upon mixing the two solutions, PS‐SH chains were grafted to the surface of AuNPs and amphiphilic AuNPs were formed at the liquid–liquid interface. PS colloidal particles decorated with AuNPs on the surfaces were prepared by adding the emulsion to excess methanol. On the surface, AuNPs were partially embedded in the colloidal particles. The outer regions of the AuNPs were exposed to the solution and were functionalized through the grafting of atom‐transfer radical polymerization (ATRP) initiator. Poly[2‐(dimethamino)ethyl methacrylate] (PDMAEMA) on AuNPs were prepared by surface‐initiated ATRP. After centrifugation and dissolving the colloidal particles in tetrahydrofuran (THF), Janus AuNPs with PS and PDMAEMA on two hemispheres were obtained. In acidic pH, Janus AuNPs are amphiphilic and are able to emulsify oil droplets in water; in basic pH, the Janus AuNPs are hydrophobic. In mixtures of THF/methanol at a volume ratio of 1:5, the Janus AuNPs self‐assemble into bilayer structures with collapsed PS in the interiors and solvated PDMAEMA at the exteriors of the structures.     

双面粒子的制备及应用研究进展

双面粒子是指粒子的两个半球表面具有不同组成或性质的微粒.这种各向异性或不对称的结构使其有很广泛的应用,但也使其制备变得困难.近年来已发展了很多制备方法,本文总结了最近几年双面粒子在制备及应用方面的研究进展.     

Janus Composite Nanotubes

We propose a facile method to achieve paramagnetic Janus nanotubes with two compositions compartmentalized onto the interior and exterior surfaces, respectively. A sulfonated polydivinylbenzene (PDVB) nanotube is prepared by simple sulfonation of the exterior surface of a PDVB nanotube. Silica@FeOOH dual layers are sequentially grown onto the sulfonated PDVB nanotube surface. The composite nanotubes become paramagnetic after calcination and can be broken into shorter pieces under vigorous ultrasonication. After selective modification of the interior and exterior surfaces of the paramagnetic nanotubes, the nanotube shell becomes Janus in wettability. Desired hydrophobic species can be selectively captured inside the cavity. The paramagnetic Janus composite nanotubes can align into parallel chains under a magnetic field, which is self‐disassembled upon removal of the magnetic field.     

A Pyrimidopyrimidine Janus‐AT Nucleoside with Improved Base‐Pairing Properties to both A and T within a DNA Duplex: The Stabilizing Effect of a Second Endocyclic Ring Nitrogen

Janus bases are heterocyclic nucleic acid base analogs that present two different faces able to simultaneously hydrogen bond to nucleosides that form Watson–Crick base pairs. The synthesis of a Janus‐AT nucleotide analogue, ^N J_AT , that has an additional endocyclic ring nitrogen and is thus more capable of efficiently discriminating T/A over G/C bases when base‐pairing in a standard duplex‐DNA context is described. Conversion to a phosphoramidite ultimately afforded incorporation into an oligonucleotide. In contrast to the first generation of carbocyclic Janus heterocycles, it remains in its unprotonated state at physiological pH and, therefore, forms very stable Watson–Crick base pairs with either A or T bases. Biophysical and computational methods indicate that ^N J_AT is an improved candidate for sequence‐specific genome targeting.