Target‐Induced and Equipment‐Free DNA Amplification with a Simple Paper Device

We report on a paper device capable of carrying out target‐induced rolling circle amplification (RCA) to produce massive DNA amplicons that can be easily visualized. Interestingly, we observed that RCA was more proficient on paper than in solution, which we attribute to a significantly higher localized concentration of immobilized DNA. Furthermore, we have successfully engineered a fully functional paper device for sensitive DNA or microRNA detection via printing of all RCA‐enabling molecules within a polymeric sugar film formed from pullulan, which was integrated with the paper device. This encapsulation not only stabilizes the entrapped reagents at room temperature but also enables colorimetric bioassays with minimal steps.     

Ligand‐Free Copper‐Catalyzed Negishi Coupling of Alkyl‐, Aryl‐, and Alkynylzinc Reagents with Heteroaryl Iodides

Reported herein is an unprecedented ligand‐free copper‐catalyzed cross‐coupling of alkyl‐, aryl‐, and alkynylzinc reagents with heteroaryl iodides. The reaction proceeds at room temperature for the coupling of primary, secondary, and tertiary alkylzinc reagents with heteroaryl iodides without rearrangement. An elevated temperature (100 °C) is required for aryl–heteroaryl and alkynyl–heteroaryl couplings.     

Visible‐Light‐Promoted Iron‐Catalyzed C(sp2)–C(sp3) Kumada Cross‐Coupling in Flow

A continuous‐flow, visible‐light‐promoted method has been developed to overcome the limitations of iron‐catalyzed Kumada–Corriu cross‐coupling reactions. A variety of strongly electron rich aryl chlorides, previously hardly reactive, could be efficiently coupled with aliphatic Grignard reagents at room temperature in high yields and within a few minutes’ residence time, considerably enhancing the applicability of this iron‐catalyzed reaction. The robustness of this protocol was demonstrated on a multigram scale, thus providing the potential for future pharmaceutical application.     

Tandem One Pot and Efficient Method for the Palladium‐Reagent‐Catalyzed Cross‐Coupling of Quinazoline Thiols

A facile synthesis of 1,4‐dihydroquinazolines from 2‐aminobenzyl amine and carbon disulfide via dithiocarbamate performed at room temperature is reported. Corresponding S‐alkyl quinazoline derivatives were obtained from 1,4‐dihydroquinazolines in one‐pot reactions under the palladium reagents after addition of alkyl halides. The versatility of this synthetic protocol has been demonstrated with various halo benzenes. The products thus obtained have been characterized by MP, IR, ¹H‐NMR, and mass spectroscopy.     

Synthesis of N,N‐Dimethylamines via Barbier–Grignard‐Type Electrophilic Amination

Aryl Grignard reagents react with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine in THF under Barbier conditions at room temperature and give N,N‐dimethylanilines with high yields in a 2‐h reaction. The amination yield of in situ Grignard reagents were not lower than those of preformed aryl Grignard reagents. In situ cycloalkyl‐, allyl‐, and benzylmagnesium bromides did not react with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine, except that amination of in situ n‐hexylmagnesium bromide resulted in a medium yield. Grignard–Barbier‐type amination of aryl bromides with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine provides a new alternative route for the synthesis of N,N‐dimethylanilines.     

HMPA‐Promoted Siladifluoromethylation of Di‐, and Triarylmethanes with the Ruppert–Prakash Reagent

A mild and efficientmethod for the synthesis of α‐siladifluoromethylated di‐, and triarylmethanes via the reaction of di‐, and triarylmethanes with Ruppert–Prakash reagents, using LDA and HMPA at room temperature, was developed.     

Cross‐linked Polymer‐Blend Gate Dielectrics through Thermal Click Chemistry

New cross‐linking reagents were synthesized and mixed with polystyrene (PS) in solution to form a blend. Thin‐films were spin‐coated from the blend and then cross‐linked by thermal activation at relatively low temperature (100 °C) to form cross‐linked gate dielectrics. This new method is compatible with plastic substrates in flexible electronics. The azide and alkyne cross‐linking reagents are kinetically stable at room temperature, so any premature cross‐linking is avoided during processing. This method also significantly improved the dielectric performances of PS thin films. Solution‐processed top‐gate organic field‐effect transistor devices with indacenodithiophene–benzothiadiazole copolymer as semiconductor layer and the cross‐linked PS blend as dielectric layer showed improved performances with lower gate leakages and higher operation stabilities than devices with neat PS film as dielectric layer.     

Room‐Temperature Arylation of Thiols: Breakthrough with Aryl Chlorides

The formation of aryl C−S bonds is an important chemical transformation because aryl sulfides are valuable building blocks for the synthesis of biologically and pharmaceutically active molecules and organic materials. Aryl sulfides have traditionally been synthesized through the transition‐metal‐catalyzed cross‐coupling of aryl halides with thiols. However, the aryl halides used are usually bromides and iodides; readily available, low‐cost aryl chlorides often not reactive enough. Furthermore, the deactivation of transition‐metal catalysts by thiols has forced chemists to use high catalyst loadings, specially designed ligands, high temperatures, and/or strong bases, thus leading to high costs and the incompatibility of some functional groups. Herein, we describe a simple and efficient visible‐light photoredox arylation of thiols with aryl halides at room temperature. More importantly, various aryl chlorides are also effective arylation reagents under the present conditions.     

Enantioselective Synthesis of N–C Axially Chiral Compounds by Cu‐Catalyzed Atroposelective Aryl Amination

N?C axially chiral compounds have emerged recently as appealing motifs for drug design. However, the enantioselective synthesis of such molecules is still poorly developed and surprisingly no metal‐catalyzed atroposelective N‐arylations have been described. Herein, we disclose an unprecedented Cu‐catalyzed atroposelective N?C coupling that proceeds at room temperature. Such mild reaction conditions, which are a crucial parameter for atropostability of the newly generated products, are operative thanks to the use of hypervalent iodine reagents as a highly reactive coupling partners. A large panel of the N?C axially chiral compounds was afforded with very high enantioselectivity (up to >99 % ee) and good yields (up to 76 %). Post‐modifications of thus accessed atropisomeric compounds allows further expansion of the diversity of these appealing compounds.     

Highly Chemo‐, Enantio‐, and Regioselective Synthesis of α,α‐Disubstituted Furanones by Cu‐Catalyzed Conjugate Addition

A highly chemo‐, enantio‐, and regioselective synthesis of furanones bearing an α,α‐disubstituted quaternary stereogenic center is reported. The Cu‐catalyzed enantioselective conjugate addition of organoaluminum reagents to unsaturated ketoesters at room temperature and subsequent lactonization took place. Synthetic transformations of furanones represent facile approaches to various cyclic or acyclic compounds bearing a quaternary stereogenic center.     

Fe‐Catalyzed Cross‐Coupling Reaction of Vinylic Ethers with Aryl Grignard Reagents

Iron‐catalyzed cross‐coupling reaction of vinylic ethers with aryl Grignard reagents is described. The reaction proceeded at room temperature with catalytic amounts of an iron salt without the aid of costly ligands and additives. In this catalytic system, vinylic C?O bonds were preferentially cleaved over aromatic C?O bonds of aryl ethers or aryl sulfonates.     

Anionic synthesis of well‐defined polymers with amine end groups

The results for efficient tertiary and primary amine functionalization of polymeric organolithium compounds in hydrocarbon solution at room temperature are described for termination reactions with N‐trimethylsilylbenzophenone imine, 3‐dimethylaminopropyl chloride and 2,2,5,5‐tetramethyl‐1‐(3‐chloropropyl)‐1‐aza‐2,5‐disilacyclopentane. Functionalizations with the functionalized initiator, 2,2,5,5‐tetramethyl‐1‐(3‐lithiopropyl)‐1‐aza‐2,5‐disilacyclopentane are presented. Conditions for quantitative amine functionalization were observed for all of these reactions and reagents.     

Single‐Electron Transmetalation: Synthesis of 1,1‐Diaryl‐2,2,2‐trifluoroethanes by Photoredox/Nickel Dual Catalytic Cross‐Coupling

Novel methods for the incorporation of fluorinated subunits into organic frameworks are important in pharmaceutical, agrochemical, and materials science applications. Herein, the first method for the cross‐coupling of benzylic α‐trifluoromethylated alkylboron reagents with (hetero)aryl bromides is achieved through application of a photoredox/nickel dual catalytic system. The harsh conditions and high temperatures required by conventional Suzuki‐coupling protocols are avoided by exploitation of an odd‐electron pathway that permits room temperature transmetalation of these recalcitrant reagents. This method represents the first direct and general route for the synthesis of unsymmetrical 1,1‐diaryl‐2,2,2‐trifluoroethanes, thereby providing efficient access to a previously unexplored chemical space.     

Influence of temperature and humidity on the degradation process of ascorbic acid in vitamin C chewable tablets

Ascorbic acid (AA) is the active ingredient of vitamin C chewable tablets. It is unstable even at room temperature, and increased temperature and humidity rapidly increase its degradation. To protect the active substance, we made its coating with polymers ethyl cellulose that provides its thermal protection and protection from moisture. We bet each particle of AA with a layer of polymer by the method of fluidization. Extra protection against thermal effects and penetration of moisture and oxygen provides the packaging. By using four kinds of packaging: polypropylene container for tablets, strips of aluminum and polyvinyl chloride Al/PVC strips, glass bottles, and strips of aluminum and polyethylene (Al.PE/PE.Al) of 3, of 6 months and of 12 months. One of the tablets are stored at room temperature (25 ± 2 °C/60% RH ± 5%), and the rest in terms of accelerated aging or increased temperature and humidity (30 ± 2 °C/65% RH ± 5% and 40 ± 2 °C/75% RH ± 5%). The speed of degradation of unprotected AA usually get doubled when there is increasing of the temperature for every 10 °C. Experimentally the concentration of AA was monitored, its oxidation product-dehydroascorbic acid and its degradation product-diketogulonic acid.     

Solvent‐Free One Pot Synthesis of 2‐aryl/Heteroarylbenzothiazoles Using Hypervalent Iodine (III) Reagents

In this article, an efficient, environmentally benign, one‐pot and simple synthesis of 2‐aryl/heteroarylbenzothiazoles by the reaction of 2‐aminothiophenol and aryl/heteroaryl aldehydes mediated by hypervalent iodine (III) reagents under solvent‐free condition at room temperature is demonstrated. All the reactions were carried out by grinding the reactants (2‐aminothiophenol and aryl/heteroaryl aldehydes) with hypervalent iodine (III) reagents in a mortar with pestle. Phenyliodine bistrifluoroacetate act as an efficient oxidizing reagent in comparison to iodobenzene diacetate in term of reaction time but yields are comparative. The advantages of this protocol are the one‐step procedure, mild reaction conditions, high yields of the products, and no side reactions.     

Stabilization of the Columnar Mesophase of Perylenediimide by Racemic Triple Tails

Whereas perylene tetracarboxdiimides derived from amino‐n‐alkanes if at all only show monotropic (thermodynamically unstable) mesogenic self‐assembly, the hexagonal columnar liquid crystalline state can be stabilized over a broad temperature range with doubly branched, doubly racemic alkyl residues. An improved tendency to homeotropic surface orientation is observed, and the orientation of the liquid crystalline domains is maintained upon cycling through the crystalline state at room temperature.     

Stereoselective Synthesis of 1,3-Enynylstannanes via Palladium Catalyzed Cross-Coupling Reactions of （Z）-α-Bromovinylstannanes

Based on the different reactivity of stannyl and bromo groups, (Z)-α-bromovinylstannanes can undergo the cross-coupling reaction with alkynyl Grignard reagents in the presence of tetrakis(triphenylphosphine)palladium(0) catalyst in THF at room temperature to afford stereoselectively 1,3-enynylstannanes in good yields.     

Synthesis and Applications of Silyl 2‐Methylprop‐2‐ene‐1‐sulfinates in Preparative Silylation and GC‐Derivatization Reactions of Polyols and Carbohydrates

Trimethylsilyl, triethylsilyl, tert‐butyldimethylsilyl, and triisopropylsilyl 2‐methylprop‐2‐ene‐1‐sulfinates were prepared through (CuOTf)₂?C₆H₆‐catalyzed sila‐ene reactions of the corresponding methallylsilanes with SO₂ at 50 °C. Sterically hindered, epimerizable, and base‐sensitive alcohols gave the corresponding silyl ethers in high yields and purities at room temperature and under neutral conditions. As the byproducts of the silylation reaction (SO₂+isobutylene) are volatile, the workup was simplified to solvent evaporation. The developed method can be employed for the chemo‐ and regioselective semiprotection of polyols and glycosides and for the silylation of unstable aldols. The high reactivity of the developed reagents is shown by the synthesis of sterically hindered per‐O‐tert‐butyldimethylsilyl‐α‐d ‐glucopyranose, the X‐ray crystallographic analysis of which is the first for a per‐O‐silylated hexopyranose. The per‐O‐silylation of polyols, hydroxy carboxylic acids, and carbohydrates with trimethylsilyl 2‐methylprop‐2‐ene‐1‐sulfinate was coupled with the GC analysis of nonvolatile polyhydroxy compounds both qualitatively and quantitatively.     

Chemoselective Chromium(II)‐Catalyzed Cross‐Coupling Reactions of Dichlorinated Heteroaromatics with Functionalized Aryl Grignard Reagents

Chromium(II) chloride catalyzes the chemoselective cross‐coupling reaction of dichloropyridines with a range of functionalized (hetero)aromatic Grignard reagents at room temperature. Functional groups, such as esters and acetals, are well tolerated in this transformation. Previously challenging substrates, quinolines and isoquinolines, participate in the selective Cr‐catalyzed cross‐coupling in cyclopentyl methyl ether (CPME) as the solvent. The effective purging of Cr salts is demonstrated by using various solid supports.     

Phase Behavior of a Designed Cyclopropyl Analogue of Monoolein: Implications for Low‐Temperature Membrane Protein Crystallization

Lipidic cubic phases (LCPs) are used in areas ranging from membrane biology to biodevices. Because some membrane proteins are notoriously unstable at room temperature, and available LCPs undergo transformation to lamellar phases at low temperatures, development of stable low‐temperature LCPs for biophysical studies of membrane proteins is called for. Monodihydrosterculin (MDS) is a designer lipid based on monoolein (MO) with a configurationally restricted cyclopropyl ring replacing the olefin. Small‐angle X‐ray scattering (SAXS) analyses revealed a phase diagram for MDS lacking the high‐temperature, highly curved reverse hexagonal phase typical for MO, and extending the cubic phase boundary to lower temperature, thereby establishing the relationship between lipid molecular structure and mesophase behavior. The use of MDS as a new material for LCP‐based membrane protein crystallization at low temperature was demonstrated by crystallizing bacteriorhodopsin at 20 °C as well as 4 °C.