Bottom‐Up Meets Top‐Down: Patchy Hybrid Nonwovens as an Efficient Catalysis Platform

Heterogeneous catalysis with supported nanoparticles (NPs) is a highly active field of research. However, the efficient stabilization of NPs without deteriorating their catalytic activity is challenging. By combining top‐down (coaxial electrospinning) and bottom‐up (crystallization‐driven self‐assembly) approaches, we prepared patchy nonwovens with functional, nanometer‐sized patches on the surface. These patches can selectively bind and efficiently stabilize gold nanoparticles (AuNPs). The use of these AuNP‐loaded patchy nonwovens in the alcoholysis of dimethylphenylsilane led to full conversion under comparably mild conditions and in short reaction times. The absence of gold leaching or a slowing down of the reaction even after ten subsequent cycles manifests the excellent reusability of this catalyst system. The flexibility of the presented approach allows for easy transfer to other nonwoven supports and catalytically active NPs, which promises broad applicability.     

Preparation of Conductive Gold Nanowires in Confined Environment of Gold‐Filled Polymer Nanotubes

Continuous conductive gold nanofibers are prepared via the “tubes by fiber templates” process. First, poly(l‐lactide) (PLLA)‐stabilized gold nanoparticles (AuNP) with over 60 wt% gold are synthesized and characterized, including gel permeation chromatography coupled with a diode array detector. Subsequent electrospinning of these AuNP with template PLLA results in composite nanofibers featuring a high gold content of 57 wt%. Highly homogeneous gold nanowires are obtained after chemical vapor deposition of 345 nm of poly(p‐xylylene) (PPX) onto the composite fibers followed by pyrolysis of the polymers at 1050 °C. The corresponding heat‐induced transition from continuous gold‐loaded polymer tubes to smooth gold nanofibers is studied by transmission electron microscopy and helium ion microscopy using both secondary electrons and Rutherford backscattered ions.

     

Robust Synthesis of Gold‐Based Multishell Structures as Plasmonic Catalysts for Selective Hydrogenation of 4‐Nitrostyrene

A robust self‐template strategy is used for facile and large‐scale synthesis of porous multishell gold with controllable shell number, sphere size, and in situ surface modification. The process involved the rapid reduction of novel Au‐melamine colloidal templates with a great amount of NaBH₄ in presence of poly(sodium‐p‐styrenesulfonate) (PSS). After soaking the templates in other metal salt solution, the obtained bimetallic templates could also be generally converted into bimetallic multishell structures by same reduction process. In the hydrogenation of 4‐nitrostyrene using NH₃BH₃ as a reducing agent, the porous triple‐shell Au with surface modification (S‐PTSAu) exhibited excellent selectivity (97 %) for 4‐aminostyrene in contrast with unmodified triple‐shell Au. Furthermore, it also showed higher enhancement of catalytic activity under irradiation of visible light as compared to similar catalysts with fewer shells.     

Amphiphilic β‐cyclodextrin‐based star‐like block copolymer unimolecular micelles for facile in situ preparation of gold nanoparticles

Multifunctional polymer unimolecular micelles, which are used as templates to fabricate stable gold nanoparticles (GNPs) in one‐step without external reductant, have been designed and prepared. Amphiphilic 21‐arm star‐like block copolymers β‐cyclodextrin‐{poly(lactide)‐poly(2‐(dimethylamino) ethyl methacrylate)‐poly[oligo(2‐ethyl‐2‐oxazoline)methacrylate]}₂₁ [β‐CD‐(PLA‐PDMAEMA‐PEtOxMA)₂₁] and the precursors are synthesized by the combination of ring‐opening polymerization (ROP) and activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP). The tertiary amine groups of PDMAEMA block reduce the counterion to zerovalent gold in situ, and these gold atoms combine mutually to form final GNPs. GNPs with relatively small size and narrow size distribution can be obtained in longer DMAEMA block copolymer, larger molar ratio of DMAEMA to HAuCl₄ and smaller absolute concentrations of both polymer and HAuCl₄. These results showed that the unimolecular micelles can be used as templates for preparing and stabilizing GNPs in situ without any external reducing agents and organic solvents, suggesting that the nanocomposite systems are latent nanocarriers for further biomedical application. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 186–196     

Catalytic reduction of 4‐nitrophenol using silver nanoparticles‐engineered poly(N‐isopropylacrylamide‐co‐acrylamide) hybrid microgels

Nearly monodisperse poly(N ‐isopropylacrylamide‐co ‐acrylamide) [P(NIPAM‐co‐AAm)] microgels were synthesized using precipitation polymerization in aqueous medium. These microgels were used as microreactors to fabricate silver nanoparticles by chemical reduction of silver ions inside the polymer network. The pure and hybrid microgels were characterized using Fourier transform infrared and UV–visible spectroscopies, dynamic light scattering, X‐ray diffraction, thermogravimetric analysis, differential scanning calorimetry and transmission electron microscopy. Results revealed that spherical silver nanoparticles having diameter of 10–20 nm were successfully fabricated in the poly(N ‐isopropylacrylamide‐co ‐acrylamide) microgels with hydrodynamic diameter of 250 ± 50 nm. The uniformly loaded silver nanoparticles were found to be stable for long time due to donor–acceptor interaction between amide groups of polymer network and silver nanoparticles. Catalytic activity of the hybrid system was tested by choosing the catalytic reduction of 4‐nitrophenol as a model reaction under various conditions of catalyst dose and concentration of NaBH₄ at room temperature in aqueous medium to explore the catalytic process. The progress of the reaction was monitored using UV–visible spectrophotometry. The pseudo first‐order kinetic model was employed to evaluate the apparent rate constant of the reaction. It was found that the apparent rate constant increased with increasing catalyst dose due to an increase of surface area as a result of an increase in the number of nanoparticles.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

β‐Cyclodextrin‐Functionalized Gold Nanoparticles/Poly(L‐cysteine) Modified Glassy Carbon Electrode for Sensitive Determination of Metronidazole

A simple electrochemical method was developed to determine metronidazole based on β‐cyclodextrin‐functionalized gold nanoparticles/poly(L ‐cysteine) modified glassy carbon electrode (β‐CD‐GNPs/poly(L ‐cys)/GCE). The electropolymerized film of poly(L ‐cys) provides a stable matrix for the fabrication of a sensing interface. β‐CD‐GNPs can form inclusion complexes with metronidazole and act as a modifier with catalytic function. The modified electrode exhibited excellent electrocatalytic activity towards metronidazole. The reaction of metronidazole at the modified electrode was an irreversible process controlled by diffusion. Under optimum experimental conditions, the logarithm of catalytic currents shows a good linear relationship with that of the metronidazole concentration in the range of 0.1–600 µmol/L with a low detection limit of 14 nmol/L. In addition, the modified electrode exhibited satisfactory stability, sensitivity and reproducibility, and could be applied to the determination of metronidazole in an injection solution.     

Recyclable Polymer‐Supported Nanometal Catalysts in Water

Two types of polymer‐supported nanometal catalysts with high catalytic activity and recyclability in water have been developed. One catalyst was composed of linear polystyrene‐stabilized metal nanoparticles (PS‐MtNPs). A palladium catalyst (PS‐PdONPs) was prepared in water by the thermal decomposition of Pd(OAc)₂ in the presence of polystyrene. The degree of immobilization of Pd, but not the size of the Pd nanoparticles, was dependent on the molecular weight and cross‐linking of the polystyrene. The PS‐PdONPs exhibited high catalytic activity for Suzuki, Heck, and Sonogashira coupling reactions in water and they could be recycled without loss of activity. Linear polystyrene was also suitable as a stabilizer for in situ generated PdNPs and PtNPs. The second catalyst was a polyion complex that was composed of poly[4‐chloromethylstyrene‐co‐(4‐vinylbenzyl)tributylammonium chloride] and poly(acrylic acid)‐stabilized PdNPs (PIC‐PdNPs). Aggregation and redispersion of PIC‐PdNPs were easily controlled by adjusting the pH value of the solution.     

Amine‐Functionalized Polyglycidyl Methacrylate Microsphere as a Unified Template for the Synthesis of Gold Nanoparticles and Single‐Crystal Gold Plates

Polyglycidyl methacrylate (PGMA) microspheres, crosslinked and surface‐functionalized by amine, can be used as a solid‐state template for the synthesis of gold (Au) crystals in the forms of either nanoparticles (NPs) or plates. It is discovered that the polymer microsphere acts as an internal template to cultivate Au NPs inside the microsphere or an external template to generate the single‐crystal plates depending on the critical concentration (C_cr) of gold ions. The ion–dipole interaction and the structure‐dependent solubility of gold induce two distinct gold nanostructures in the presence of the functionalized polymer microspheres. The catalytic activity and long‐term storage of the developed gold nanostructures that can be easily scaled‐up for mass production through the developed novel methodology is demonstrated.     

Polymer‐Coated PtCo Nanoparticles Deposited on Diblock Copolymer Templates: Chemical Selectivity versus Topographical Effects

Metal–polymer hybrid films are prepared by deposition of polymer‐coated PtCo nanoparticles onto block copolymer templates. For templating, a thin film of the lamella‐forming diblock copolymer poly(styrene‐b‐methyl methacrylate) P(S‐b‐MMA) is chemically etched and a topographical surface relief with 3 nm height difference is created. Two types of polymer‐grafted PtCo nanoparticles are compared to explore the impact of chemical selectivity versus the topographical effect of the nanotemplate. A preferable wetting of the polystyrene (PS) domains with poly(styrenesulfonate) (PSS)‐coated PtCo nanoparticles (instead of residing in the space between the domains) is observed. Our investigation reveals that the interaction between PSS‐coated nanoparticles and PS domains dominates over the topographical effects of the polymer surface. In contrast, a non‐selective deposition of poly(N‐vinyl‐2‐pyrrolidone) (PVP)‐coated PtCo nanoparticles and the formation of large metal‐particle aggregates on the film is observed.     

Comparison of the Peroxidase‐Like Activity of Unmodified,Amino‐Modified,and Citrate‐Capped Gold Nanoparticles

The origin of the peroxidase‐like activity of gold nanoparticles and the impact of surface modification are studied. Furthermore, some influencing factors, such as fabrication process, redox property of the modifier, and charge property of the substrate, are investigated. Compared to amino‐modified or citrate‐capped gold nanoparticles, unmodified gold nanoparticles show significantly higher catalytic activity toward peroxidase substrates, that is, the superficial gold atoms are a contributing factor to the observed peroxidase‐like activity. The different catalytic activities of amino‐modified and citrate‐capped gold nanoparticles toward 3,3′,5,5′‐tetramethylbenzidine (TMB) and 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonic acid) diammonium salt (ABTS) show that the charge characteristics of the nanoparticles and the substrate also play an important role in the catalytic reactions.     

Thermoresponsive hydrogel of poly(glycidyl methacrylate‐co‐N‐isopropylacrylamide) as a nanoreactor of gold nanoparticles

The synthesis of a thermoresponsive hydrogel of poly(glycidyl methacrylate‐co‐N‐isopropylacrylamide) (PGMA‐co‐PNIPAM) and its application as a nanoreactor of gold nanoparticles are studied. The thermoresponsive copolymer of PGMA‐co‐PNIPAM is first synthesized by the copolymerization of glycidyl methacrylate and N‐isopropylacrylamide using 2,2′‐azobis(isobutyronitrile) as an initiator in tetrahydrofuran at 70 °C and then crosslinked with diethylenetriamine to form a thermoresponsive hydrogel. The lower critical solution temperature (LCST) of the thermoresponsive hydrogel is about 50 °C. The hydrogel exists as 280‐nm spheres below the LCST. The diameter of the spherical hydrogel gradually decreases to a minimum constant of 113 nm when the temperature increases to 75 °C. The hydrogel can act as a nanoreactor of gold nanoparticles because of the coordination of nitrogen atoms of the crosslinker with gold ions, on which a hydrogel/gold nanocomposite is synthesized. The LCST of the resultant hydrogel/gold nanocomposite is similar to that of the hydrogel. The size of the resultant gold nanoparticles is about 15 nm. The hydrogel/gold nanocomposite can act as a smart and recyclable catalyst. At a temperature below the LCST, the thermoresponsive nanocomposite is a homogeneous and efficient catalyst, whereas at a temperature above the LCST, it becomes a heterogeneous one, and its catalytic activity greatly decreases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2812–2819, 2007     

Preparation and characterization of poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L‐lactide) polymer nanoparticles

A poly(D,L ‐lactide)–bromine macroinitiator was synthesized for use in the preparation of a novel biocompatible polymer. This amphiphilic diblock copolymer consisted of biodegradable poly(D,L ‐lactide) and 2‐methacryloyloxyethyl phosphorylcholine and was formed by atom transfer radical polymerization. Polymeric nanoparticles were prepared by a dialysis process in a select solvent. The shape and structure of the polymeric nanoparticles were determined by ¹H NMR, atomic force microscopy, and ζ‐potential measurements. The results of cytotoxicity tests showed the good cytocompatibility of the lipid‐like diblock copolymer poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L ‐lactide). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 688–698, 2007     

High‐Temperature Spray‐Dried Polymer/Bacteria Microparticles for Electrospinning of Composite Nonwovens

Living Micrococcus luteus (M. luteus) and Escherichia coli (E. coli) are encapsulated in poly(vinyl alcohol), poly(vinylpyrrolidone), hydroxypropyl cellulose, and gelatin by high‐temperature spray drying. The challenge is the survival of the bacteria during the standard spray‐drying process at temperatures of 150 °C (M. luteus) and 120 °C (E. coli). Raman imaging and transmission electron microscopy indicate encapsulated bacteria in hollow composite microparticles. The versatility of the spray‐dried polymer bacteria microparticles is successfully proved by standard polymer solution–processing techniques such as electrospinning, even with harmful solvents, to water‐insoluble polyacrylonitrile, polystyrene, poly(methyl methacrylate), and poly(vinyl butyrate) nanofiber nonwovens, which opens numerous new opportunities for novel applications.     

PNIPAM‐b‐(PEA‐g‐PDMAEA) double‐hydrophilic graft copolymer: Synthesis and its application for preparation of gold nanoparticles in aqueous media

A series of well‐defined double‐hydrophilic graft copolymers, consisting of poly(N‐isopropylacrylamide)‐b‐poly(ethyl acrylate) (PNIPAM‐b‐PEA) backbone and poly(2‐(dimethylamino)ethyl acrylate) (PDMAEA) side chains, were synthesized by the combination of single‐electron‐transfer living radical polymerization (SET‐LRP) and atom‐transfer radical polymerization (ATRP). PNIPAM‐b‐PEA backbone was first prepared by sequential SET‐LRP of N‐isopropylacrylamide and 2‐hydroxyethyl acrylate at 25 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system followed by the transformation into the macroinitiator by treating the pendant hydroxyls with 2‐chloropropionyl chloride. The final graft copolymers with narrow molecular weight distributions were synthesized by ATRP of 2‐(dimethylamino)ethyl acrylate initiated by the macroinitiator at 40 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system via the grafting‐from strategy. These copolymers were employed to prepare stable colloidal gold nanoparticles with controlled size in aqueous solution without any external reducing agent. The morphology and size of the nanoparticles were affected by the length of PDMAEA side chains, pH value, and the feed ratio of the graft copolymer to HAuCl₄. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1811–1824, 2009     

Synthesis and characterization of water‐soluble gold nanoparticles stabilized by comb‐shaped copolymers

The water‐soluble gold nanoparticles stabilized by well‐defined comb‐shaped copolymers have been synthesized successfully. The hybrid nanoparticles consist of gold core and poly[poly(ethylene oxide) methyl ether acrylate]‐block‐poly(N‐isopropylacrylamide) [P(A‐MPEO)‐block‐PNIPAM] shell. The water‐soluble comb‐shaped copolymers, P(A‐MPEO)‐block‐PNIPAM with PNIPAM as a handle, were successfully synthesized via a macromonomer technique using reversible addition fragmentation chain transfer (RAFT) polymerization method. The terminal dithioester group of the comb‐shaped copolymer was reduced to a thiol end group forming SH‐terminated copolymers, P(A‐MPEO)‐block‐PNIPAM‐SH. Successively they were used to stabilize gold nanoparticles by the “grafting‐to” approach. The hybrid nanoparticles were characterized by TEM, UV–vis, and HRTEM. Because of the thermosensitive property of PNIPAM in aqueous solution, the comblike copolymer‐tethered gold nanoparticles show a sharp and reversible phase transition at 30 °C in aqueous solution, which was determined by microdifferential scanning calorimetry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 341–352, 2008     

Stabilization and Large Nonlinearity of Gold Nanoparticles Functionalized with a π‐Conjugated Polymer

Gold nanoparticles protected by a novel π‐conjugated polymer [poly(p‐phenylene ethynylene) containing pendent disulfide and bipyridine groups] are synthesized and characterized. The polymer can stabilize the gold nanoparticles effectively. The nonlinear optical properties of the gold nanoparticle colloid solutions in toluene are investigated by using the Z‐scan technique at a wavelength of 532 nm and pulse width of 4 ns. The gold‐nanoparticle colloid solutions show an exceptional nonlinear absorption effect, which simultaneously contains the saturated absorption resulting from third‐order nonlinearity and a large reverse‐saturated absorption resulting from fifth‐order nonlinearity. In addition, asymmetric self‐focusing refractive effects are investigated in the colloid solutions.     

Gold‐Loaded Carbon Nanoparticles from Poly(vinyl alcohol)‐b‐poly(acrylonitrile) Non‐Shell‐Cross‐Linked Micelles

Herein we show that a new amphiphilic poly(vinyl alcohol)‐b‐poly(acrylonitrile) block copolymer dispersed in water can be easily loaded with gold nanoparticles by addition of chlorauric acid followed by reduction by sodium borohydride. After deposition of the so‐loaded micelles onto a silicon wafer, followed by an appropriate thermal treatment, the poly(acrylonitrile) core of the micelles is carbonized, while the poly(vinyl alcohol) shell is completely decomposed and volatilized, leading to gold encapsulated in carbon nanoparticles. The morphology of the micelles is maintained during thermal treatment without requiring shell‐cross‐linking of the micelles prior to pyrolysis.     

Ultrastable and Highly Catalytically Active N‐Heterocyclic‐Carbene‐Stabilized Gold Nanoparticles in Confined Spaces

Controlling the size and surface functionalization of nanoparticles (NPs) can lead to improved properties and applicability. Herein, we demonstrate the efficiency of the metal‐carbene template approach (MCTA) to synthesize highly robust and soluble three‐dimensional polyimidazolium cages (PICs) of different sizes, each bearing numerous imidazolium groups, and use these as templates to synthesize and stabilize catalytically active, cavity‐hosted, dispersed poly‐N‐heterocyclic carbene (NHC)‐anchored gold NPs. Owing to the stabilization of the NHC ligands and the effective confinement of the cage cavities, the as‐prepared poly‐NHC‐shell‐encapsulated AuNPs displayed promising stability towards heat, pH, and chemical regents. Most notably, all the Au@PCCs (PCC=polycarbene cage) exhibited excellent catalytic activities in various chemical reactions, together with high stability and durability.     

Ionic‐Liquid‐Grafted Rigid Poly(p‐Phenylene) Microspheres: Efficient Heterogeneous Media for Metal Scavenging and Catalysis

Novel guanidinium ionic liquid‐grafted rigid poly(p‐phenylene) (PPPIL) microspheres have been developed for metal scavenging and catalysis. The noble‐metal nanoparticles supported on the microspheres surface can be used as efficient heterogeneous catalysts. The combination of nanoparticles and ionic liquid fragments on the microsphere surfaces enhance the activity and durability of the catalyst. The PPPIL ? Pd⁰ catalyst has been tested in the Suzuki cross‐coupling reaction, and exhibits much higher catalytic activity than Pd catalysts supported on porous polymer matrices. The PPPIL ? Pd⁰ catalyst can be recycled at least for nine runs without any significant loss of activity. The present approach may, therefore, have potential applications in transition‐metal‐nanocatalyzed reactions.