Photochemische Reaktionen von Cyclopentadienylbis(ethen)rhodium mit Phenanthren,Acenaphthylen und Triphenylen,sowie ungewöhnlicher H-Austausch zwischen η2-koordinierten Phenanthren- bzw. Acenaphthylen- und η5-Cyclopentadienyl-Liganden

Photochemical Reactions of Cyclopentadienylbis(ethene)rhodium with Phenanthrene, Acenaphthylene, and Triphenylene, and Unusual H Exchange between η²-Coordinated Phenanthrene or Acenaphthylene and η⁵-Cyclopentadienyl Ligands During UV irradiation of [CpRh(C₂H₄)₂] (Cp = η⁵-C₅H₅) in hexane/ether in the presence of phenanthrene one ethene ligand is displaced by coordination of the 9,10 double bond of phenanthrene, and (η⁵-cyclopentadienyl) (η²-ethene)(η²-9,10-phenanthrene)rhodium ( 1 ) is formed. The analogous reaction in hexane in the presence of acenaphthylene occurs with formation of the complexes (η²-1,2-acenaphthylene)(η⁵-cyclopentadienyl)(²-ethene)rhodium 2 and bis(η²-1,2-acenaphthylene)(η⁵-cyclopentadienyl)rhodium 3 in which one and two ethene molecules of [CpRh(C₂H₄)₂], respectively, are substituted by η²-1,2-acenaphthylene. The irradiation of [CpRh(C₂H₄)₂] with triphenylene in hexane yields the compounds [CpRh(η⁴-1,2,3,4-triphenylene)] ( 4 ), [(CpRh)₂(μ-η³: η³-triphenylene)] ( 5 ), and [(CpRh)₃(μ₃-η²: η²: η²-triphenylene)] ( 6 ). Despite the partially very low yields the new complexes could be unequivocally characterized spectroscopically and in the case of 1 and 3 by X-ray structural analysis. The compounds 1 and 2 in solution reveal a novel dynamic behaviour; via an intramolecular C? H activation, exchange occurs between the protons of the η²-coordinated arene and the Cp ligand. The complex 4 in solution is fluxional, too.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Reversible σ‐Borane‐to‐Borylene Transformation: A Little Something For Everyone

A reaction with many facets : The facile dehydrogenative synthesis of a borylene complex (left in scheme) from a dihydroborane (right), proceeds reversibly at room‐temperature. The implications of this reaction for the fields of inorganic, main‐group, and hydrogen‐storage chemistry are covered in this Highlight.

     

Structure and Reactivity of Late Transition Metal η3‐Benzyl Complexes

The coordination of transition metals to organic fragments can yield complexes with fascinating and unexpected binding patterns. The study of metal‐benzyl complexes has demonstrated the feasibility of η³‐coordination, which results in a dearomatized ring. These complexes also offer insight into reaction mechanisms as proposed intermediates in catalytic cycles. In this Review we discuss the synthesis and characterization of these complexes with late transition metals and the subsequent development of catalytic benzylic functionalization methods, including asymmetric variants.     

Synthesis and Structure of Low‐valent η4‐Cinnamaldehyde Cobalt Complexes

Three η⁴‐(C=C–C=O) coordination cobalt(I) complexes 1 – 3 were synthesized by the reactions of cinnamaldehyde, p‐fluorocinnamaldehyde, and p‐chlorocinnamaldehyde with CoMe(PMe₃)₄. Complex 4 as η²‐(C=C) coordination was prepared by the reaction of chalcone with Co(PMe₃)₄. The structures of complexes 1 – 4 were confirmed by single‐crystal X‐ray diffraction. Although the reactions didn't undergo C–H bond activation and decarbonylation, the formation of complexes 1 – 4 deepens our understanding of the reactions between α,β‐unsaturated aldehyde or ketone with low‐valent central cobalt atom.     

The Bifurcated σ-Hole···σ-Hole Stacking Interactions

The bifurcated σ-hole···σ-hole stacking interactions between organosulfur molecules, which are key components of organic optical and electronic materials, were investigated by using a combined method of the Cambridge Structural Database search and quantum chemical calculation. Due to the geometric constraints, the binding energy of one bifurcated σ-hole···σ-hole stacking interaction is in general smaller than the sum of the binding energies of two free monofurcated σ-hole···σ-hole stacking interactions. The bifurcated σ-hole···σ-hole stacking interactions are still of the dispersion-dominated noncovalent interactions. However, in contrast to the linear monofurcated σ-hole···σ-hole stacking interaction, the contribution of the electrostatic energy to the total attractive interaction energy increases significantly and the dispersion component of the total attractive interaction energy decreases significantly for the bifurcated σ-hole···σ-hole stacking interaction. Another important finding of this study is that the low-cost spin-component scaled zeroth-order symmetry-adapted perturbation theory performs perfectly in the study of the bifurcated σ-hole···σ-hole stacking interactions. This work will provide valuable information for the design and synthesis of novel organic optical and electronic materials.     

Syntheses,and Crystal Structures of Indium Complexes with η2‐Piperidinyldithiocarbamate and η2‐Pyridine‐2‐Thionate Containing Ligands: Structures of [In(η2‐S2CNC5H10)3] and [In(η2‐pyS)3]

The η²‐thio‐indium complexes [In(η²‐thio)₃] (thio = S₂CNC₅H₁₀, 2 ; SNC₄H₄, (pyridine‐2‐thionate, pyS, 3 ) and [In(η²‐pyS)₂(η²‐acac)], 4 , (acac: acetylacetonate) are prepared by reacting the tris(η²‐acac)indium complex [In(η²‐acac)₃], 1 with HS₂CNC₅H₁₀, pySH, and pySH with ratios of 1:3, 1:3, and 1:2 in dichloromethane at room temperature, respectively. All of these complexes are identified by spectroscopic methods and complexes 2 and 3 are determined by single‐crystal X‐ray diffraction. Crystal data for 2 : space group, C2/c with a = 13.5489(8) Å, b = 12.1821(7) Å, c = 16.0893(10) Å, β = 101.654(1)°, V = 2600.9(3) ų, and Z = 4. The structure was refined to R = 0.033 and Rw = 0.086; Crystal data for 3 : space group, P2₁ with a = 8.8064 (6) Å, b = 11.7047 (8) Å, c = 9.4046 (7) Å, β = 114.78 (1)°, V = 880.13(11) ų, and Z = 2. The structure was refined to R = 0.030 and Rw = 0.061. The geometry around the metal atom of the two complexes is a trigonal prismatic coordination. The piperidinyldithiocarbamate and pyridine‐2‐thionate ligands, respectively, coordinate to the indium metal center through the two sulfur atoms and one sulfur and one nitrogen atoms, respectively. The short C‐N bond length in the range of 1.322(4)–1.381(6) Å in 2 and C‐S bond length in the range of 1.715(2)–1.753(6) Å in 2 and 3 , respectively, indicate considerable partial double bond character.     

Chloro(η6‐p‐cymene)(phosphoramidite)ruthenium(II), a 16‐Electron Fragment Stabilized by an η2‐Aryl–Metal Interaction,and Its Use in Asymmetric Cyclopropanation

Chloride abstraction from the half‐sandwich complexes [RuCl₂(η⁶‐p‐cymene)(P*‐κP)] ( 2a : P* = (S_a,R,R)‐ 1a = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐1‐phenylethyl)]phosphoramidite; 2b : P* = (S_a,R,R)‐ 1b = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐(1‐(1‐naphthalen‐1‐yl)ethyl]phosphoramidite) with (Et₃O)[PF₆] or Tl[PF₆] gives the cationic, 18‐electron complexes dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐phenyl]ethyl}[(1R)‐1‐phenylethyl]phosphoramidite‐κP}ruthenium(II) hexafluorophosphate ( 3a ) and [Ru(S)]‐dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐naphthalen‐1‐yl]ethyl}[(1R)‐1‐(naphthalen‐1‐yl)ethyl]phosphoramidite‐κP)ruthenium(II) hexafluorophosphate ( 3b ), which feature the η²‐coordination of one aryl substituent of the phosphoramidite ligand, as indicated by ¹H‐, ¹³C‐, and ³¹P‐NMR spectroscopy and confirmed by an X‐ray study of 3b . Additionally, the dissociation of p‐cymene from 2a and 3a gives dichloro{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐(1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP)ruthenium(II) ( 4a ) and di‐μ‐chlorobis{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP}diruthenium(II) bis(hexafluorophosphate) ( 5a ), respectively, in which one phenyl group of the N‐substituents is η⁶‐coordinated to the Ru‐center. Complexes 3a and 3b catalyze the asymmetric cyclopropanation of α‐methylstyrene with ethyl diazoacetate with up to 86 and 87% ee for the cis‐ and the trans‐isomers, respectively.     

A Novel Synthesis of γ,δ‐Unsaturated Aldehydes from α‐Formyl‐γ‐lactones

A preparatively useful one‐step transformation of γ,γ‐disubstituted α‐formyl‐γ‐lactones into trisubstituted γ,δ‐unsaturated aldehydes is described, by means of catalytic amounts of either AcOH or AcOEt in the vapor phase over a glass support. A mechanistic rationale is proposed.     

The Renaissance of α‐Methylene‐γ‐butyrolactones: New Synthetic Approaches

The amount of research activity concerning α‐methylene‐γ‐butyrolactones and α‐alkylidene‐γ‐butyrolactones has increased dramatically in recent years. This Review summarizes the structural types, biological activities, and biosynthesis of these compounds, concentrating on publications from the past 10 years. Traditional approaches to α‐methylene‐γ‐butyrolactones and α‐alkylidene‐γ‐butyrolactones are then reviewed together with novel approaches, including those from our own research group, reported more recently.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Die Kristallstrukturen von Me3SiI · β-Picolin und Me3SiI · γ-Picolin Vergleich der Lewis-Basen Pyridin, β-Picolin und γ-Picolin

The Crystal Structure of Me₃SiI · β-Picoline and Me₃SiI · γ-Picoline A Comparison between the Lewis-Bases Pyridine, β-Picoline, and γ-Picoline The reaction of Iodinetrimethylsilane with β- und γ-Picoline (Pic) leads to solid 1 : 1 compounds Me₃SiI · β-Picoline 1 , Me₃SiI · γ-Picoline 2. The reaction was performed at room temperature. Yellow single crystals were obtained by sublimation. Single crystal X-ray investigations confirm that both compounds are ionic [Me₃SiPic]⁺I^?. The comparison of β-Picoline with γ-Picoline and Pyridine (Py) demonstrates that the presence of a methyl group and also its position has no significant influence on the Si? N bond length in compound 1, 2 and on the adduct Me₃SiI · Py.     

Organocatalytic Enantioselective Synthesis of Tetrasubstituted α‐Amino Allenoates by Dearomative γ‐Addition of 2,3‐Disubstituted Indoles to β,γ‐Alkynyl‐α‐imino Esters

The first asymmetric synthesis of tetrasubstituted α‐amino allenoates by a chiral phosphoric acid catalyzed dearomative γ‐addition reaction of 2,3‐disubstituted indoles to β,γ‐alkynyl‐α‐imino esters is reported. This method provides access to a series of highly functionalized tetrasubstituted allenes featuring quaternary stereocenters in high yields, and with excellent regio‐, diastereo‐, and enantioselectivities under mild conditions without by‐product formation. Representative large‐scale reactions and diverse transformations of the products into various scaffolds with potential biological activities render are also disclosed. The mechanism of the reaction was elucidated by control reactions and DFT calculations.     

Rhodium‐catalyzed Asymmetric Hydrogenation of α‐Dehydroamino Ketones: A General Approach to Chiral α‐amino Ketones

Rhodium/DuanPhos‐catalyzed asymmetric hydrogenation of aliphatic α‐dehydroamino ketones has been achieved and afforded chiral α‐amino ketones in high yields and excellent enantioselectives (up to 99 % ee), which could be reduced further to chiral β‐amino alcohols by LiAlH(tBuO)₃ with good yields_. This protocol provides a readily accessible route for the synthesis of chiral α‐amino ketones and chiral β‐amino alcohols.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

Palladium‐Catalyzed Carbonylative α‐Arylation to β‐Ketonitriles

A carbonylative α‐arylation process employing unactivated nitriles for the first time is described. The reaction tolerates a range of (hetero)aryl iodides and several nitrile coupling partners. No prefunctionalization of the nitriles is necessary and the resulting β‐ketonitriles are obtained in good to excellent yields. The methodology also allows for a convenient ¹³C‐labelling of the generated carbonyl moiety.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597