Copper as a Robust and Transparent Electrocatalyst for Water Oxidation

Copper metal is in theory a viable oxidative electrocatalyst based on surface oxidation to Cu^III and/or Cu^IV, but its use in water oxidation has been impeded by anodic corrosion. The in situ formation of an efficient interfacial oxygen‐evolving Cu catalyst from Cu^II in concentrated carbonate solutions is presented. The catalyst necessitates use of dissolved Cu^II and accesses the higher oxidation states prior to decompostion to form an active surface film, which is limited by solution conditions. This observation and restriction led to the exploration of ways to use surface‐protected Cu metal as a robust electrocatalyst for water oxidation. Formation of a compact film of CuO on Cu surface prevents anodic corrosion and results in sustained catalytic water oxidation. The Cu/CuO surface stabilization was also applied to Cu nanowire films, which are transparent and flexible electrocatalysts for water oxidation and are an attractive alternative to ITO‐supported catalysts for photoelectrochemical applications.     

Well‐Defined Palladium Nanoparticles Supported on Siliceous Mesocellular Foam as Heterogeneous Catalysts for the Oxidation of Water

Herein, we describe the use of Pd nanoparticles immobilized on an amino‐functionalized siliceous mesocellular foam for the catalytic oxidation of H₂O. The Pd nanocatalyst proved to be capable of mediating the four‐electron oxidation of H₂O to O₂, both chemically and photochemically. The Pd nanocatalyst is easy to prepare and shows high chemical stability, low leaching, and recyclability. Together with its promising catalytic activity, these features make the Pd nanocatalyst of potential interest for future sustainable solar‐fuel production.     

A Million Turnover Molecular Anode for Catalytic Water Oxidation

Molecular ruthenium‐based water oxidation catalyst precursors of general formula [Ru(tda)(Lⁱ)₂] (tda^2? is [2,2′:6′,2′′‐terpyridine]‐6,6′′‐dicarboxylato; L¹=4‐(pyren‐1‐yl)‐N‐(pyridin‐4‐ylmethyl)butanamide, 1 b ; L²=4‐(pyren‐1‐yl)pyridine), 1 c ), have been prepared and thoroughly characterized. Both complexes contain a pyrene group allowing ready and efficiently anchoring via π interactions on multi‐walled carbon nanotubes (MWCNT). These hybrid solid state materials are exceptionally stable molecular water‐oxidation anodes capable of carrying out more than a million turnover numbers (TNs) at pH 7 with an E_app=1.45 V vs. NHE without any sign of degradation. XAS spectroscopy analysis before, during, and after catalysis together with electrochemical techniques allow their unprecedented oxidative ruggedness to be monitored and verified.     

Graphite‐Supported Gold Nanoparticles as Efficient Catalyst for Aerobic Oxidation of Benzylic Amines to Imines and N‐Substituted 1,2,3,4‐Tetrahydroisoquinolines to Amides: Synthetic Applications and Mechanistic Study

Selective oxidation of amines using oxygen as terminal oxidant is an important area in green chemistry. In this work, we describe the use of graphite‐supported gold nanoparticles (AuNPs/C) to catalyze aerobic oxidation of cyclic and acyclic benzylic amines to the corresponding imines with moderate‐to‐excellent substrate conversions (43–100 %) and product yields (66–99 %) (19 examples). Oxidation of N‐substituted 1,2,3,4‐tetrahydroisoquinolines in the presence of aqueous NaHCO₃ solution gave the corresponding amides in good yields (83–93 %) with high selectivity (up to amide/enamide=93:4) (6 examples). The same protocol can be applied to the synthesis of benzimidazoles from the reaction of o‐phenylenediamines with benzaldehydes under aerobic conditions (8 examples). By simple centrifugation, AuNPs/C can be recovered and reused for ten consecutive runs for the oxidation of dibenzylamine to N‐benzylidene(phenyl)methanamine without significant loss of catalytic activity and selectivity. This protocol “AuNPs/C+O₂” can be scaled to the gram scale, and 8.9 g (84 % isolated yield) of 3,4‐dihydroisoquinoline can be obtained from the oxidation of 10 g 1,2,3,4‐tetrahydroisoquinoline in a one‐pot reaction. Based on the results of kinetic studies, radical traps experiment, and Hammett plot, a mechanism involving the hydrogen‐transfer reaction from amine to metal and oxidation of M‐H is proposed.     

Development of a Continuous‐Flow System for Asymmetric Hydrogenation Using Self‐Supported Chiral Catalysts

Well‐designed, self‐assembled, metal–organic frameworks were constructed by simple mixing of multitopic MonoPhos‐based ligands ( 3 ; MonoPhos=chiral, monodentate phosphoramidites based on the 1,1′‐bi‐2‐naphthol platform) and [Rh(cod)₂]BF₄ (cod=cycloocta‐1,5‐diene). This self‐supporting strategy allowed for simple and efficient catalyst immobilization without the use of extra added support, giving well‐characterized, insoluble (in toluene) polymeric materials ( 4 ). The resulting self‐supported catalysts ( 4 ) showed outstanding catalytic performance for the asymmetric hydrogenation of a number of α‐dehydroamino acids ( 5 ) and 2‐aryl enamides ( 7 ) with enantiomeric excess (ee) ranges of 94–98 % and 90–98 %, respectively. The linker moiety in 4 influenced the reactivity significantly, albeit with slight impact on the enantioselectivity. Acquisition of reaction profiles under steady‐state conditions showed 4 h and 4 i to have the highest reactivity (turnover frequency (TOF)=95 and 97 h^?1 at 2 atm, respectively), whereas appropriate substrate/catalyst matching was needed for optimum chiral induction. The former was recycled 10 times without loss in ee (95–96 %), although a drop in TOF of approximately 20 % per cycle was observed. The estimation of effective catalytic sites in self‐supported catalyst 4 e was also carried out by isolation and hydrogenation of catalyst–substrate complex, showing about 37 % of the Rh^I centers in the self‐supported catalyst 4 e are accessible to substrate 5 c in the catalysis. A continuous flow reaction system using an activated C/ 4 h mixture as stationary‐phase catalyst for the asymmetric hydrogenation of 5 b was developed and run continuously for a total of 144 h with >99 % conversion and 96–97 % enantioselectivity. The total Rh leaching in the product solution is 1.7 % of that in original catalyst 4 h .     

Synthesis of Highly Active and Stable Spinel‐Type Oxygen Evolution Electrocatalysts by a Rapid Inorganic Self‐Templating Method

Composition‐adjustable spinel‐type metal oxides, Mn_xCo_3?xO_4?δ (x=0.8–1.4), were synthesized in ethanol solutions by a rapid inorganic self‐templating mechanism using KCl nanocrystals as the structure‐directing agent. The Mn_xCo_3?xO_4?δ materials showed ultrahigh oxygen evolution activity and strong durability in alkaline solutions, and are capable of delivering a current density of 10 mA cm^?2 at 1.58 V versus the reversible hydrogen electrode in 0.1 M KOH solution, which is superior in comparison to IrO₂ catalysts under identical experimental conditions, and comparable to the most active noble‐metal and transition‐metal oxygen evolution electrocatalysts reported so far. The high performance for catalytic oxygen evolution originates from both compositional and structural features of the synthesized materials. The moderate content of Mn doping into the spinel framework led to their improved electronic conductivity and strong oxidizing ability, and the well‐developed porosity, accompanied with the high affinity between OH^? reactants and catalyst surface, contributed to the smooth mass transport, thus endowing them with superior oxygen evolution activity.     

pH‐Switchable Self‐Assembled Materials

Self‐assembled materials, which are able to respond to external stimuli, have been extensively studied over the last decades. A particularly exciting stimulus for a wide range of biomedical applications is the pH value of aqueous solutions, since deprotonation‐protonation events are crucial for structural and functional properties of biopolymers. In living cells and tissues, intra‐ and extracellular pH values are stringently regulated, but can deviate from pH neutral as observed for example in tumorous, inflammatory sites, in endocytic pathways, and specific cellular compartments. By using a pH‐switch as a stimulus, it is thereby possible to address specific targets in order to cause a programmed response of the supramolecular material. This strategy has not only been successfully applied in fundamental research but also in clinical studies. In this feature article, current strategies that have been used in order to design materials with pH‐responsive properties are illustrated. This discussion only addresses selected examples from the last four years, the self‐assembly of polymer‐based building blocks, assemblies emerging from small molecules including surfactants or derived from biological macromolecules, and finally the controlled self‐assembly of oligopeptides.

     

One‐Step Synthesis of Self‐Supported Nickel Phosphide Nanosheet Array Cathodes for Efficient Electrocatalytic Hydrogen Generation

Nickel phosphide is an emerging low‐cost, earth‐abundant catalyst that can efficiently reduce water to generate hydrogen. However, the synthesis of nickel phosphide catalysts usually involves multiple steps and is laborious. Herein, a convenient and straightforward approach to the synthesis of a three‐dimensional (3D) self‐supported biphasic Ni₅P₄‐Ni₂P nanosheet (NS) array cathode is presented, which is obtained by direct phosphorization of commercially available nickel foam using phosphorus vapor. The synthesized 3D Ni₅P₄‐Ni₂P‐NS array cathode exhibits outstanding electrocatalytic activity and long‐term durability toward the hydrogen evolution reaction (HER) in acidic medium. The fabrication procedure reported here is scalable, showing substantial promise for use in water electrolysis. More importantly, the approach can be readily extended to synthesize other self‐supported transition metal phosphide HER cathodes.     

Self‐Pillared,Single‐Unit‐Cell Sn‐MFI Zeolite Nanosheets and Their Use for Glucose and Lactose Isomerization

Single‐unit‐cell Sn‐MFI, with the detectable Sn uniformly distributed and exclusively located at framework sites, is reported for the first time. The direct, single‐step, synthesis is based on repetitive branching caused by rotational intergrowths of single‐unit‐cell lamellae. The self‐pillared, meso‐ and microporous zeolite is an active and selective catalyst for sugar isomerization. High yields for the conversion of glucose into fructose and lactose to lactulose are demonstrated.     

Control over Electrochemical Water Oxidation Catalysis by Preorganization of Molecular Ruthenium Catalysts in Self‐Assembled Nanospheres

Oxygen formation through water oxidation catalysis is a key reaction in the context of fuel generation from renewable energies. The number of homogeneous catalysts that catalyze water oxidation at high rate with low overpotential is limited. Ruthenium complexes can be particularly active, especially if they facilitate a dinuclear pathway for oxygen bond formation step. A supramolecular encapsulation strategy is reported that involves preorganization of dilute solutions (10^?5 m ) of ruthenium complexes to yield high local catalyst concentrations (up to 0.54 m ). The preorganization strategy enhances the water oxidation rate by two‐orders of magnitude to 125 s^?1, as it facilitates the diffusion‐controlled rate‐limiting dinuclear coupling step. Moreover, it modulates reaction rates, enabling comprehensive elucidation of electrocatalytic reaction mechanisms.     

A Semiconductor-Mediator-Catalyst Artificial Photosynthetic System for Photoelectrochemical Water Oxidation

In fabricating an artificial photosynthesis (AP) electrode for water oxidation, we have devised a semiconductor-mediator-catalyst structure that mimics photosystem II (PSII). It is based on a surface layer of vertically grown nanorods of Fe₂O₃ on fluorine doped tin oxide (FTO) electrodes with a carbazole mediator base and a Ru(II) carbene complex on a nanolayer of TiO₂ as a water oxidation co-catalyst. The resulting hybrid assembly, FTO|Fe₂O₃|−carbazole|TiO₂|−Ru(carbene) , demonstrates an enhanced photoelectrochemical (PEC) water oxidation performance compared to an electrode without the added carbaozle base with an increase in photocurrent density of 2.2-fold at 0.95 V vs. NHE and a negatively shifted onset potential of 500 mV. The enhanced PEC performance is attributable to carbazole mediator accelerated interfacial hole transfer from Fe₂O₃ to the Ru(II) carbene co-catalyst, with an improved effective surface area for the water oxidation reaction and reduced charge transfer resistance.     

Oxidation of Organosilanes with Nanoporous Copper as a Sustainable Non‐Noble‐Metal Catalyst

Although many noble‐metal catalysts have been used for the oxidation of organosilanes, there has been less success with non‐noble‐metal catalysts. Here, unsupported nanoporous copper (np‐Cu) is used to catalyze the oxidation of organosilanes under mild conditions. It is the first time that this reaction has been achieved with a heterogeneous copper catalyst with high activity and selectivity. Both water and alcohols are used as oxidants and the corresponding organosilanols and organosilyl ethers are obtained in high yield. The possible mechanism was obtained by kinetic studies. The catalyst could be reused at least five times without evident loss of activity. As a novel green catalyst np‐Cu should play a unique role in organic synthesis.     

Modification of Wide‐Band‐Gap Oxide Semiconductors with Cobalt Hydroxide Nanoclusters for Visible‐Light Water Oxidation

Cobalt‐based compounds, such as cobalt(II) hydroxide, are known to be good catalysts for water oxidation. Herein, we report that such cobalt species can also activate wide‐band‐gap semiconductors towards visible‐light water oxidation. Rutile TiO₂ powder, a well‐known wide‐band‐gap semiconductor, was capable of harvesting visible light with wavelengths of up to 850 nm, and thus catalyzed water oxidation to produce molecular oxygen, when decorated with cobalt(II) hydroxide nanoclusters. To the best of our knowledge, this system constitutes the first example that a particulate photocatalytic material that is capable of water oxidation upon excitation by visible light can also operate at such long wavelengths, even when it is based on earth‐abundant elements only.     

A Molecular Tetrahedral Cobalt–Seleno-Based Complex as an Efficient Electrocatalyst for Water Splitting

The cobalt–seleno-based coordination complex, [Co{(SePⁱPr₂)₂N}₂], is reported with respect to its catalytic activity in oxygen evolution and hydrogen evolution reactions (OER and HER, respectively) in alkaline solutions. An overpotential of 320 and 630 mV was required to achieve 10 mA cm⁻² for OER and HER, respectively. The overpotential for OER of this CoSe₄-containing complex is one of the lowest that has been observed until now for molecular cobalt(II) systems, under the reported conditions. In addition, this cobalt–seleno-based complex exhibits a high mass activity (14.15 A g⁻¹) and a much higher turn-over frequency (TOF) value (0.032 s⁻¹) at an overpotential of 300 mV. These observations confirm analogous ones already reported in the literature pertaining to the potential of molecular cobalt–seleno systems as efficient OER electrocatalysts.     

Operando X‐Ray Absorption Spectroscopy Shows Iron Oxidation Is Concurrent with Oxygen Evolution in Cobalt–Iron (Oxy)hydroxide Electrocatalysts

Iron cations are essential for the high activity of nickel and cobalt‐based (oxy)hydroxides for the oxygen evolution reaction, but the role of iron in the catalytic mechanism remains under active investigation. Operando X‐ray absorption spectroscopy and density functional theory calculations are used to demonstrate partial Fe oxidation and a shortening of the Fe?O bond length during oxygen evolution on Co(Fe)O_xH_y. Cobalt oxidation during oxygen evolution is only observed in the absence of iron. These results demonstrate a different mechanism for water oxidation in the presence and absence of iron and support the hypothesis that oxidized iron species are involved in water‐oxidation catalysis on Co(Fe)O_xH_y.     

Single‐Site Copper(II) Water Oxidation Electrocatalysis: Rate Enhancements with HPO42− as a Proton Acceptor at pH 8

The complex Cu^II(Py₃P) ( 1 ) is an electrocatalyst for water oxidation to dioxygen in H₂PO₄^?/HPO₄^2? buffered aqueous solutions. Controlled potential electrolysis experiments with 1 at pH 8.0 at an applied potential of 1.40 V versus the normal hydrogen electrode resulted in the formation of dioxygen (84 % Faradaic yield) through multiple catalyst turnovers with minimal catalyst deactivation. The results of an electrochemical kinetics study point to a single‐site mechanism for water oxidation catalysis with involvement of phosphate buffer anions either through atom–proton transfer in a rate‐limiting O? O bond‐forming step with HPO₄^2? as the acceptor base or by concerted electron–proton transfer with electron transfer to the electrode and proton transfer to the HPO₄^2? base.