The hydroxyl radical reaction rate constant and products of 3,5‐dimethyl‐1‐hexyn‐3‐ol

A bimolecular rate constant,k_DHO, of (29 ± 9) × 10^?12 cm³ molecule^?1 s^?1 was measured using the relative rate technique for the reaction of the hydroxyl radical (OH) with 3,5‐dimethyl‐1‐hexyn‐3‐ol (DHO, HC?CC(OH)(CH₃)CH₂CH(CH₃)₂) at (297 ± 3) K and 1 atm total pressure. To more clearly define DHO's indoor environment degradation mechanism, the products of the DHO + OH reaction were also investigated. The positively identified DHO/OH reaction products were acetone ((CH₃)₂C?O), 3‐butyne‐2‐one (3B2O, HC?CC(?O)(CH₃)), 2‐methyl‐propanal (2MP, H(O?)CCH(CH₃)₂), 4‐methyl‐2‐pentanone (MIBK, CH₃C(?O)CH₂CH(CH₃)₂), ethanedial (GLY, HC(?O)C(?O)H), 2‐oxopropanal (MGLY, CH₃C(?O)C(?O)H), and 2,3‐butanedione (23BD, CH₃C(?O)C(?O)CH₃). The yields of 3B2O and MIBK from the DHO/OH reaction were (8.4 ± 0.3) and (26 ± 2)%, respectively. The use of derivatizing agents O‐(2,3,4,5,6‐pentalfluorobenzyl)hydroxylamine (PFBHA) and N,O‐bis(trimethylsilyl)trifluoroacetamide (BSTFA) clearly indicated that several other reaction products were formed. The elucidation of these other reaction products was facilitated by mass spectrometry of the derivatized reaction products coupled with plausible DHO/OH reaction mechanisms based on previously published volatile organic compound/OH gas‐phase reaction mechanisms. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 534–544, 2004     

Synthesis of 5‐Aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles via Three‐Component Reaction of 1,1‐Bis(methylsulfanyl)‐2‐nitroethene,Aromatic Aldehydes,and Hydrazine

An efficient approach for the preparation of functionalized 5‐aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles 2 is described. This three‐component reaction between benzaldehydes 1 , NH₂NH₂?H₂O, and 1,1‐bis(methylsulfanyl)‐2‐nitroethene proceeds in EtOH under reflux conditions in good‐to‐excellent yields. The structures of 2 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Chemoselective Route for Synthesis of N‐Aryl‐3‐oxochromeno[2,3‐c]pyrazole‐2(3H)‐carbothioamide Derivatives

A chemoselective route for the synthesis of chromeno[2,3‐c]pyrazole‐2(3H)‐carbothioamide derivatives by a five‐component reaction of salicylaldehyde, malononitrile, NH₂NH₂?H₂O, aryl isothiocyanate, and H₂O in EtOH/AcOH mixture is reported. This new protocol has the advantages of high yields, short reaction times, ease of operation, and simple purification. All structures were confirmed by IR, ¹H‐ and ¹³C‐NMR, and MS analyses. A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Synthesis of Some New 2‐Oxo‐N‐[(10H‐phenothiazin‐10‐yl)alkyl] Derivatives of Azetidine‐1‐carboxamides

The synthesis of a new series of 4‐aryl‐3‐chloro‐2‐oxo‐N‐[3‐(10H‐phenothiazin‐10‐yl)propyl]azetidine‐1‐carboxamides, 4a – 4m , is described. Phenothiazine on reaction with Cl(CH₂)₃Br at room temperature gave 10‐(3‐chloropropyl)‐10H‐phenothiazine ( 1 ), and the latter reacted with urea to yield 1‐[3‐(10H‐phenothiazin‐10‐yl)propyl]urea ( 2 ). Further reaction of 2 with several substituted aromatic aldehydes led to N‐(arylmethylidene)‐N′‐[3‐(phenothiazin‐10‐yl)propyl]ureas 3a – 3m , which, on treatment with ClCH₂COCl in the presence of Et₃N, furnished the desired racemic trans‐2‐oxoazetidin‐1‐carboxamide derivatives 4a – 4m . The structures of all new compounds were confirmed by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, FAB mass spectrometry, and chemical methods.     

Reactivity study on morpholine‐1‐carbothioic acid (2‐phenyl‐3H‐quinazolin‐4‐ylidene) amide

Regioselective reactions of morpholine‐1‐carbothioic acid (2‐phenyl‐3H‐quinazolin‐4‐ylidene) amide ( 1 ) with electrophiles and nucleophiles were studied. The compound ( 1 ) reacts with alkyl halides in basic medium to afford S‐substituted isothiourea derivatives, with amines to give 1,1‐disubstituted‐3‐(2‐phenyl‐3H‐quinazolin‐4‐ylidene) thioureas and l‐substituted‐3‐(2‐phenyl‐quinazolin‐4‐yl) thioureas via transami‐nation reaction. The reaction of ( 1 ) with amines in the presence of H₂O₂ provided N⁴‐disubstituted‐N'⁴‐(2‐phenylquinazolin‐4‐yl)morpholin‐4‐carboximidamide via oxidative desulfurization. Estimation of reactivity sites on ( 1 ) was supported using the ab initio (HF/6‐31G**) quantum chemistry calculations. The ir, ¹H nmr, ¹³C nmr, mass spectroscopy and x‐ray identified the isolated products.     

One‐Pot,Pseudo‐Five‐Component Synthesis of Bis[2‐(arylimino)‐1,3‐thiazolidin‐4‐ones]

Synthesis and characterization of bis[2‐(arylimino)‐1,3‐thiazolidin‐4‐ones] are described. The one‐pot, pseudo‐five‐component reaction of an aliphatic diamine, isothiocyanatobenzene, and dialkyl but‐2‐ynedioate at room temperature in anhydrous CH₂Cl₂ gives the title compound in relatively high yield. Under the same conditions, aromatic 1,2‐diamines yield 2‐(arylimino)‐N‐(enaminoaryl)‐1,3‐thiazolidin‐4‐ones in a pseudo‐four‐component reaction. Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 3).     

Ethyl 1,4‐Dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylates by a Tandem SNAr‐Addition‐Elimination Reaction

A series of N‐substituted 1,4‐dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylate esters has been prepared in two steps from ethyl 2‐(2‐chloronicotinoyl)acetate. Treatment of the β‐ketoester with N,N‐dimethylformamide dimethyl acetal in N,N‐dimethylformamide (DMF) gave a 95% yield of the 2‐dimethylaminomethylene derivative. Subsequent reaction of this β‐enaminone with primary amines in DMF at 120^oC for 24 h then afforded the target compounds in 47–82% yields by a tandem S_NAr‐addition‐elimination reaction. Synthetic and procedural details as well as a mechanistic rationale are presented.     

Rearrangement of 2—Benzothiazolylthioacetyl hidrazide in Ethanol Solution of Potassium Hydroxide：Synthesis of s—Triazolo[3,4—b] benzothiazol—3—thiol and Its Derivatives

A novel rearrangement reaction about 2-benzothiazolylthioacetyl hydrazide (1) to produce s-triazolo[3,4-b] benzothiazol-3-thiol (3) in the presence of KOH and CS2 was described.Other way to synthesize 3 from 2-benzothiazolyl-hydrazine (2) under the same condition was compared and the Mannich reaction of compound 3 was reported too.Their structures were established by elemental analyses,IR,^1H nmr and MS spectra.     

Pinacol Rearrangement of 3,4‐Dihydro‐3,4‐dihydroxyquinolin‐2(1H)‐ones: An Alternative Pathway to Viridicatin Alkaloids and Their Analogs

3‐Alkyl/aryl‐3‐hydroxyquinoline‐2,4‐diones were reduced with NaBH₄ to give cis‐3‐alkyl/aryl‐3,4‐dihydro‐3,4‐dihydroxyquinolin‐2(1H)‐ones. These compounds were subjected to pinacol rearrangement by treatment with concentrated H₂SO₄, resulting in 4‐alkyl/aryl‐3‐hydroxyquinolin‐2(1H)‐ones. When a benzyl (Bn) group was present in position 3 of the starting compound, its elimination occurred during the rearrangement, and the corresponding 3‐hydroxyquinolin‐2(1H)‐one was formed. The reaction mechanisms are discussed for all transformations. All compounds were characterized by IR, ¹H‐ and ¹³C‐NMR spectroscopy, as well as mass spectrometry.     

A highly efficient synthesis of (Z)‐1‐aryl‐2‐silyl‐1‐ stannylethenes and their conversion to (E)‐2‐ arylethenyl‐, (Z)‐2‐(2‐pyridyl)ethenyl‐ and allenyl‐silanes

A Pd(dba)₂–P(OEt)₃ combination allowed the silastannation of arylacetylenes, 1‐hexyne or propargyl alcohols with tributyl(trimethylsilyl)stannane to take place at room temperature, producing (Z)‐2‐silyl‐1‐stannyl‐1‐substituted ethenes in high yields. Novel silyl(stannyl)ethenes were fully characterized by ¹H‐, ¹³C‐, ²⁹Si‐ and ¹¹⁹Sn‐NMR as well as infrared and mass analyses. Treatment of a series of (Z)‐1‐aryl‐2‐silyl‐1‐stannylethenes and (Z)‐1‐(3‐pyridyl)‐2‐silyl‐1‐stannylethene with hydrochloric acid or hydroiodic acid in the presence of tetraethylammonium chloride (TEACl) or tetrabutylammonium iodide (TBAI) led to the exclusive formation of (E)‐trimethyl(2‐arylethenyl)silanes with high stereoselectivity. A similar reaction of (Z)‐1‐(2‐anisyl)‐2‐silyl‐1‐stannylethene also produced E‐type trimethyl[2‐(2‐anisyl)ethenyl]silane, while (Z)‐trimethyl [2‐(2‐pyridyl)ethenyl]silane was produced exclusively from (Z)‐1‐(2‐pyridyl)‐2‐silyl‐1‐stannylethene. Protodestannylation of (Z)‐1‐[hydroxy(phenyl)methyl]‐2‐silyl‐1‐stannylethene with trifluoroacetic acid took place via the β‐elimination of hydroxystannane, providing trimethyl(3‐phenylpropa‐1,2‐dienyl)silane quite easily. The destannylation products were also fully characterized. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Synthesis of Polysubstituted Benzenes via the Vinylogous Michael Addition of Alkylidenemalononitriles to 2‐(1,3‐Dioxo‐1H‐inden‐2(3H)‐ylidene)malononitrile

An efficient synthesis for polysubstituted benzenes was successfully developed by the reaction of ninhydrin (=2,2‐dihydroxyindane‐1,3‐dione), malononitrile (=propanedinitrile), and alkylidenemalononitrile. The method involves vinylogous Michael addition of alkylidenemalononitrile to 2‐(1,3‐dioxo‐1H‐inden‐2(3H)‐ylidene)malononitrile, which formed by condensation of malononitrile and ninhydrin in the presence of Et₃N, and the alcoholic solvent has participated in the reaction as a reagent. The method has the advantages of good yields and of not requiring a metal catalyst. The structures were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses, and, in the case of 2c , by X‐ray crystallography. A plausible mechanism for this reaction is proposed (Scheme).     

Synthesis and Characterization of N,N‐Di‐substituted Acylthiourea Copper(II) Complexes

A series of six N,N‐di‐substituted acylthiourea ArC(O)NHC(S)NRR′ ligands (denoted as HLⁿ) [Ar = 1‐Naph: NRR′ = NPh₂, HL¹ ( 1 ); N(iPr)Ph, HL² ( 2 ). Ar = Mes: NRR′ = NPh₂, HL⁴ ( 3 ); N(iPr)Ph, HL⁵ ( 4 ); NEt₂, HL⁶ ( 5 ). Ar = Ph: NRR′ = N(iPr)Ph, HL⁸ ( 6 )] were synthesized and characterized. These ligands were deprotonated to form Cu^II complexes through metathesis or combined redox reaction with copper halides. The structures of the complexes were investigated with single‐crystal X‐ray diffraction. The reaction of the 1‐naphthalene derivative HL¹ ( 1 ) with CuBr in the presence of sodium acetate produced cis‐CuL¹₂ ( 7 ), where the deprotonated ligand is bound to the Cu^II atom in a bidentate‐(O, S) coordination mode. Similarly treatment of HL² ( 2 ) with NaOAc and CuCl resulted in the formation of the cis‐arranged product [cis‐CuL²₂ ( 8 )]. The reaction of mesityl derivative HL⁴ ( 3 ) and CuBr with and without the addition of NaOAc gave the cis‐CuL⁴₂ ( 9 ) and cis‐(HL⁴)₂CuBr ( 10 ), respectively. In contrast, reaction of HL⁵ ( 4 ) and CuI in the presence of NaOAc resulted in trans‐CuL⁵₂ ( 11 ). Alternatively trans‐CuL⁶₂ ( 12 ) was obtained by the reaction of diethyl‐substituted HL⁶ ( 5 ) with CuCl₂ in the absence of a base.     

One‐Step Synthesis of Dialkyl 2‐[(4‐Methylphenyl)sulfonyl]‐1H‐pyrrole‐3,4‐dicarboxylates by Reaction of Acetylenedicarboxylates with ‘Tosylmethyl Isocyanide’ (TsMIC) and Triphenylphosphine

The reactive 1 : 1 adducts in the reaction between Ph₃P and dialkyl acetylenedicarboxylates have been trapped with ‘tosylmethyl isocyanide’ (TsMIC ; 1 ) to yield dialkyl 2‐[(4‐methylphenyl)sulfonyl]‐1H‐pyrrole‐3,4‐dicarboxylates 3 (Scheme 1). The structures of the highly functionalized compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 2).     

H‐transfer reaction during decomposition of N‐(2‐methylpropyl)‐ N‐(1‐diethylphosphono‐2,2‐dimethylpropyl)‐N‐oxyl (SG1)‐based alkoxyamines

Thermal decomposition of four tertiary N‐(2‐methylpropyl)‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl)‐N‐oxyl (SG1)‐based alkoxyamines (SG1‐C(Me)₂‐C(O)‐OR, R = Me, tBu, Et, H) has been studied at different experimental conditions using ¹H and ³¹P NMR spectroscopies. This experiment represents the initiating step of methyl methacrylate polymerization. It has been shown that H‐transfer reaction occurs during the decomposition of three alkoxyamines in highly degassed solution, whereas no products of H‐transfer are detected during decomposition of SG1‐MAMA alkoxyamine. The value of the rate constant of H‐transfer for alkoxyamines 1 (SG1‐C(Me)₂‐C(O)‐OMe) and 2 ( SG1‐C(Me)₂‐C(O)‐OtBu) has been estimated as 1.7 × 10³ M^?1s^?1. The high influence of oxygen on decomposition mechanism is found. In particular, in poorly degassed solutions, nearly quantitative formation of oxidation product has been observed, whereas at residual pressure of 10^?5 mbar, the main products originate from H‐atom transfer reaction. The acidity of the reaction medium affects the decomposition mechanism suppressing the H‐atom transfer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Ligand‐Based Control of Single‐Site vs. Multi‐Site Reactivity by a Trichromium Cluster

The trichromium cluster (^tbsL)Cr₃(thf) ([^tbsL]^6?=[1,3,5‐C₆H₉(NC₆H₄‐o‐NSi^tBuMe₂)₃]^6?) exhibits steric‐ and solvation‐controlled reactivity with organic azides to form three distinct products: reaction of (^tbsL)Cr₃(thf) with benzyl azide forms a symmetrized bridging imido complex (^tbsL)Cr₃(μ³‐NBn); reaction with mesityl azide in benzene affords a terminally bound imido complex (^tbsL)Cr₃(μ¹‐NMes); whereas the reaction with mesityl azide in THF leads to terminal N‐atom excision from the azide to yield the nitride complex (^tbsL)Cr₃(μ³‐N). The reactivity of this complex demonstrates the ability of the cluster‐templating ligand to produce a well‐defined polynuclear transition metal cluster that can access distinct single‐site and cooperative reactivity controlled by either substrate steric demands or reaction media.     

Visible‐Light‐Promoted Photocatalytic B−C Coupling via a Boron‐Centered Carboranyl Radical: Facile Synthesis of B(3)‐Arylated o‐Carboranes

A visible‐light‐mediated in situ generation of a boron‐centered carboranyl radical (o‐C₂B₁₀H₁₁ ^. ) has been described. With eosin Y as a photoredox catalyst, 3‐diazonium‐o‐carborane tetrafluoroborate [3‐N₂‐o‐C₂B₁₀H₁₁][BF₄] was converted into the corresponding boron‐centered carboranyl radical intermediate, which can undergo efficient electrophilic substitution reaction with a wide range of (hetero)arenes. This general and simple procedure provides a metal‐free alternative for the synthesis of 3‐(hetero)arylated‐o‐carboranes.     

Synthesis,Crystal Structures,and Fungicidal Activity of Novel 1,5‐Diaryl‐3‐(glucopyranosyloxy)‐1H‐pyrazoles

Five novel pyrazole‐coupled glucosides, 1,5‐diaryl‐1H‐pyrazol‐3‐yl 2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐glucopyranosides 5a – 5e , were synthesized by the phase‐transfer catalytic reaction of 1,5‐diaryl‐1H‐pyrazol‐3‐ols 4a – 4e with acetobromo‐α‐D ‐glucose in H₂O/CHCl₃ under alkaline conditions, using Bu₄N⁺Br^? as catalyst. Then, glucosides 5a – 5c were deacetylated in a solution of Na₂CO₃/MeOH to yield the 1,5‐diaryl‐3‐(β‐D ‐glucopyranosyloxy)‐1H‐pyrazoles 6a – 6c . Their structures were characterized by ¹H,¹H‐COSY, ¹H‐, ¹³C‐, and ¹⁹F‐NMR spectroscopy, as well as elemental analysis. The structures of 5d and 6c were also determined by single‐crystal X‐ray diffraction analysis. A preliminary in vitro bioassay indicated that compounds 4e and 5d exhibited excellent‐to‐medium fungicidal activity against Sclerotinia sclerotiorum at the dosage of 10 μg/ml.     

One‐Pot Regioselective Synthesis of Novel Oximino Ester‐Containing 1‐Aryl‐4‐chloro‐3‐oxypyrazoles as Potential Fungicides

A novel, functional‐group‐tolerant, and highly regioselective one‐pot synthesis of six 4‐chloro‐1‐aryl‐3‐oxypyrazoles, 8a – 8f , containing an oximino ester moiety has been developed. Their structures were characterized by ¹H‐ and ¹³C‐NMR, IR, MS, and elemental analyses. The regioselectivity of the reaction was also determined by single‐crystal X‐ray diffraction analysis of product 8d . The reaction pathway, proposed with the aid of DFT calculations, likely proceeds via a DMF‐catalyzed mechanism, which involves an electrophilic attack by SOCl₂ and two nucleophilic substitutions by benzyl bromide (BnBr) and Cl^?, respectively, as the key steps. A preliminary in vitro bioassay indicated that most compounds exhibited good fungicidal activities against Sclerotinia sclerotiorum and Gibberella zeae. Especially, 8d and 8e displayed higher or similar fungicidal activities compared with pyraclostrobin at the concentration of 10 μg/ml.     

A One‐Pot Synthesis of 1,2‐Dihydroisoquinoline Derivatives from Isoquinoline via a Four‐Component Reaction

A four‐component reaction for the synthesis of 1,2‐dihydroisoquinoline derivatives is described. The Huisgen 1,4‐dipolar intermediate, which is produced from isoquinoline and an electron‐deficient acetylene compound 1 , reacts with H₂O in the presence of diketene to produce 1,2‐dihydroisoquinoline derivatives 2 (Scheme 1). In addition, reaction of isoquinoline, dibenzoylacetylene (=1,4‐diphenylbut‐2‐yne‐1,4‐dione), and diketene in the presence of H₂O leads to pyrroloisoquinoline derivative 7 . The structures of the compounds 2a – f and 7 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, EI‐MS) and by elemental analyses. A plausible mechanism for the reaction is proposed (Schemes 2 and 3).