A Dissolution/Precipitation Equilibrium on the Surface of Iridium‐Based Perovskites Controls Their Activity as Oxygen Evolution Reaction Catalysts in Acidic Media

Recently, Ir^V‐based perovskite‐like materials were proposed as oxygen evolution reaction (OER) catalysts in acidic media with promising performance. However, iridium dissolution and surface reconstruction were observed, questioning the real active sites on the surface of these catalysts. In this work, Sr₂MIr^(V)O₆ (M=Fe, Co) and Sr₂Fe_0.5Ir_0.5^(V)O₄ were explored as OER catalysts in acidic media. Their activities were observed to be roughly equal to those previously reported for La₂LiIrO₆ or Ba₂PrIrO₆. Coupling electrochemical measurements with iridium dissolution studies under chemical or electrochemical conditions, we show that the deposition of an IrO_x layer on the surface of these perovskites is responsible for their OER activity. Furthermore, we experimentally reconstruct the iridium Pourbaix diagram, which will help guide future research in controlling the dissolution/precipitation equilibrium of iridium species for the design of better Ir‐based OER catalysts.     

Nanosized IrOx–Ir Catalyst with Relevant Activity for Anodes of Proton Exchange Membrane Electrolysis Produced by a Cost‐Effective Procedure

We have developed a highly active nanostructured iridium catalyst for anodes of proton exchange membrane (PEM) electrolysis. Clusters of nanosized crystallites are obtained by reducing surfactant‐stabilized IrCl₃ in water‐free conditions. The catalyst shows a five‐fold higher activity towards oxygen evolution reaction (OER) than commercial Ir‐black. The improved kinetics of the catalyst are reflected in the high performance of the PEM electrolyzer (1 mg_Ir cm^?2), showing an unparalleled low overpotential and negligible degradation. Our results demonstrate that this enhancement cannot be only attributed to increased surface area, but rather to the ligand effect and low coordinate sites resulting in a high turnover frequency (TOF). The catalyst developed herein sets a benchmark and a strategy for the development of ultra‐low loading catalyst layers for PEM electrolysis.     

Activating Inert,Nonprecious Perovskites with Iridium Dopants for Efficient Oxygen Evolution Reaction under Acidic Conditions

Simultaneous realization of improved activity, enhanced stability, and reduced cost remains a desirable yet challenging goal in the search of oxygen evolution electrocatalysts in acid. Herein we report iridium‐containing strontium titanates (Ir‐STO) as active and stable, low‐iridium perovskite electrocatalysts for the oxygen evolution reaction (OER) in acid. The Ir‐STO contains 57 wt % less iridium relative to the benchmark catalyst IrO₂, but it exhibits more than 10 times higher catalytic activity for OER. It is shown to be among the most efficient iridium‐based oxide electrocatalysts for OER in acid. Theoretical results reveal that the incorporation of iridium dopants in the STO matrix activates the intrinsically inert titanium sites, strengthening the surface oxygen adsorption on titanium sites and thereby giving nonprecious titanium catalytic sites that have activities close to or even better than iridium sites.     

Activating Inert,Nonprecious Perovskites with Iridium Dopants for Efficient Oxygen Evolution Reaction under Acidic Conditions

Simultaneous realization of improved activity, enhanced stability, and reduced cost remains a desirable yet challenging goal in the search of oxygen evolution electrocatalysts in acid. Herein we report iridium‐containing strontium titanates (Ir‐STO) as active and stable, low‐iridium perovskite electrocatalysts for the oxygen evolution reaction (OER) in acid. The Ir‐STO contains 57 wt % less iridium relative to the benchmark catalyst IrO₂, but it exhibits more than 10 times higher catalytic activity for OER. It is shown to be among the most efficient iridium‐based oxide electrocatalysts for OER in acid. Theoretical results reveal that the incorporation of iridium dopants in the STO matrix activates the intrinsically inert titanium sites, strengthening the surface oxygen adsorption on titanium sites and thereby giving nonprecious titanium catalytic sites that have activities close to or even better than iridium sites.     

A Highly Active Bifunctional Iridium Complex with an Alcohol/Alkoxide‐Tethered N‐Heterocyclic Carbene for Alkylation of Amines with Alcohols

A series of new iridium(III) complexes containing bidentate N‐heterocyclic carbenes (NHC) functionalized with an alcohol or ether group (NHC? OR, R=H, Me) were prepared. The complexes catalyzed the alkylation of anilines with alcohols as latent electrophiles. In particular, biscationic Ir^III complexes of the type [Cp*(NHC‐OH)Ir(MeCN)]²⁺2[BF₄^?] afforded higher‐order amine products with very high efficiency; up to >99 % yield using a 1:1 ratio of reactants and 1–2.5 mol % of Ir, in short reaction times (2–16 h) and under base‐free conditions. Quantitative yields were also obtained at 50 °C, although longer reaction times (48–60 h) were needed. A large variety of aromatic amines have been alkylated with primary and secondary alcohols. The reactivity of structurally related iridium(III) complexes was also compared to obtain insights into the mechanism and into the structure of possible catalytic intermediates. The Ir^III complexes were stable towards oxygen and moisture, and were characterized by NMR, HRMS, single‐crystal X‐ray diffraction, and elemental analyses.     

Iridium‐Catalyzed Distal Hydroboration of Aliphatic Internal Alkenes

The regioselective hydroboration of aliphatic internal alkenes remains a great challenge. Reported herein is an iridium‐catalyzed hydroboration of aliphatic internal alkenes, providing distal‐borylated products in good to excellent yields with high regioselectivity (up to 99:1). We also demonstrate that the C?B bond of the distal‐borylated product can be readily converted into other functional groups. DFT calculations indicate that the reaction proceeds through an unexpected Ir^III/Ir^V cycle.     

Specific “Unlocking” of a Nanozyme‐Based Butterfly Effect To Break the Evolutionary Fitness of Chaotic Tumors

Chaos and the natural evolution of tumor systems can lead to the failure of tumor therapies. Herein, we demonstrate that iridium oxide nanoparticles (IrO_x) possess acid‐activated oxidase and peroxidase‐like functions and wide pH‐dependent catalase‐like properties. The integration of glucose oxidase (GOD) unlocked the oxidase and peroxidase activities of IrO_x by the production of gluconic acid from glucose by GOD catalysis in cancer cells, and the produced H₂O₂ was converted into O₂ to compensate its consumption in GOD catalysis owing to the catalase‐like function of the nanozyme, thus resulting in the continual consumption of glucose and the self‐supply of substrates to generate superoxide anion and hydroxyl radical. Moreover, IrO_x can constantly consume glutathione (GSH) by self‐cyclic valence alternation of Ir^IV and Ir^III. These cascade reactions lead to a “butterfly effect” of initial starvation therapy and the subsequent pressure of multiple reactive oxygen species (ROS) to completely break the self‐adaption of cancer cells.     

Enhanced electrochemical evolution of oxygen by using nanoflowers made from a gold and iridium oxide composite

We report on the synthesis of a composite made from iridium oxide and gold that has a flower-like morphology. The ratio of iridium oxide to gold can be controlled by altering the concentrations of the metal precursors or the pH of the solution containing the reductant citrate. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and laser confocal micro-Raman spectroscopy were applied to characterize the structures of the nanoflowers, and a mechanism of their formation was deduced. The nanoflowers display an electrocatalytic activity in an oxygen evolution reaction (OER) that is significantly enhanced compared to bare iridium oxide nanoparticles. The highest turnover frequency for the OER of the new nanoflowers is 10.9?s^?1, which is almost one order of magnitude better than that of the respective nanoparticles. These attractive features are attributed to the high oxidation states of iridium in the nanoflowers which is caused by the transfer of electronic charge from metal oxides to gold, and also to the flower fractal structure which is thought to provide a much more accessible surface than suspensions of the respective nanoparticle.

State of iridium supported on SO4/ZrO2

The Ir/ZrO₂ and Ir/SO₄/ZrO₂ systems were studied by diffuse-reflectance IR spectroscopy using CO as a probe molecule. After reduction of 0.5% Ir/ZrO₂ in flowing hydrogen at 200°C, the state of iridium is essentially Ir⁰, as in the iridium systems supported on amphoteric oxide supports. For Ir/SO₄/ZrO₂, the stabilization of ionic forms of the metal, the formation of species with a partial positive charge, and an increase in the frequencies of CO adsorbed on Ir⁰ particles, as compared with systems without sulfur, are found. At a concentration as low as 0.1 wt.%, iridium exists substantially as Ir³⁺ ions or small Ir^?+ particles. An increase in the concentration of iridium to 0.5 wt.% leads to the formation of the bulk Ir _n ⁰ phase, whose fraction increases as the iridium content increases. This phase predominates in the samples with 2.5 wt.% iridium.     

Asymmetric Hydrogenation with Iridium C,N and N,P Ligand Complexes: Characterization of Dihydride Intermediates with a Coordinated Alkene

Previously elusive iridium dihydride alkene complexes have been identified and characterized by NMR spectroscopy in solution. Reactivity studies demonstrated that these complexes are catalytically competent intermediates. Additional H₂ is required to convert the catalyst‐bound alkene into the hydrogenation product, supporting an Ir^III/Ir^V cycle via an [Ir^III(H)₂(alkene)(H₂)(L)]⁺ intermediate, as originally proposed based on DFT calculations. NMR analyses indicate a reaction pathway proceeding through rapidly equilibrating isomeric dihydride alkene intermediates with a subsequent slow enantioselectivity‐determining step. As in the classical example of asymmetric hydrogenation with rhodium diphosphine catalysts, it is a minor, less stable intermediate that is converted into the major product enantiomer.     

Investigation of the oxygen evolution reaction on Ti/IrO2 electrodes using isotope labelling and on-line mass spectrometry

Oxygen evolution on Ti/IrO₂ anodes has been studied in 1M HClO₄ electrolyte using ¹⁸O labelling together with differential electrochemical mass spectrometry (DEMS) measurements.It has been shown that during successive cyclic voltammetric measurements in H₂ ¹⁸O containing electrolyte the amount of ¹⁶O₂ (m/z = 32) decreases, with a concomitant increase of ¹⁸O¹⁶O (m/z = 34) after each cycle before reaching a steady state after four cycles. The obtained higher ¹⁶O₂ concentration in the evolved oxygen during the first scans is because ¹⁶O from the IrO₂ film contribute in the oxygen evolution reaction.Analysis of the experimental data has shown that the amount of lattice oxygen, which is involved in the oxygen exchange reaction, is in the order of 1% of the total IrO₂ loading. This is an indication that only the outer surface of the oxide electrode participates in the oxygen evolution reaction.In a second series of experiments it has been demonstrated that oxygen evolution on Ir¹⁶O₂ in H₂¹⁸O containing electrolyte result in the formation of Ir¹⁸O₂.Consequently, we can conclude that the IrO₂ layers participate in the oxygen evolution reaction in acid media at least to a several monolayer extend.     

Room‐Temperature Decarboxylative Couplings of α‐Oxocarboxylates with Aryl Halides by Merging Photoredox with Palladium Catalysis

Enabled by merging iridium photoredox catalysis and palladium catalysis, α‐oxocarboxylate salts can be decarboxylatively coupled with aryl halides to generate aromatic ketones and amides at room temperature. DFT calculations suggest that this reaction proceeds through a Pd⁰–Pd^II–Pd^III pathway, in which the Pd^III intermediate is responsible for reoxidizing Ir^II to complete the Ir^III–*Ir^III–Ir^II photoredox cycle.     

Synthesis,Structure, and Reactivity of Hydridoiridium Complexes Bearing a Pincer‐Type PSiP Ligand

A series of iridium tetrahydride complexes [Ir(H)₄(PSiP‐R)] bearing a tridentate pincer‐type bis(phosphino)silyl ligand ([{2‐(R₂P)C₆H₄}₂MeSi]⁻, PSiP‐R, R=Cy, iPr, or tBu) were synthesized by the reduction of [IrCl(H)(PSiP‐R)] with Me₄N ⋅ BH₄ under argon. The same reaction under a nitrogen atmosphere afforded a rare example of thermally stable iridium(III)–dinitrogen complexes, [Ir(H)₂(N₂)(PSiP‐R)]. Two isomeric dinitrogen complexes were produced, in which the PSiP ligand coordinated to the iridium center in meridional and facial orientations, respectively. Attempted substitution of the dinitrogen ligand in [Ir(H)₂(N₂)(PSiP‐Cy)] with PMe₃ required heating at 150 °C to give the expected [Ir(H)₂(PMe₃)(PSiP‐Cy)] and a trigonal bipyramidal iridium(I)–dinitrogen complex, [Ir(N₂)(PMe₃)(PSiP‐Cy)]. The reaction of [Ir(H)₄(PSiP‐Cy)] with three equivalents of 2‐norbornene (nbe) in benzene afforded [Ir^I(nbe)(PSiP‐Cy)] in a high yield, while a similar reaction of [Ir(H)₄(PSiP‐R)] with an excess of 3,3‐dimethylbutene (tbe) in benzene gave the C H bond activation product, [Ir^III(H)(Ph)(PSiP‐R)], in high yield. The oxidative addition of benzene is reversible; heating [Ir^III(H)(Ph)(PSiP‐Cy)] in the presence of PPh₃ in benzene resulted in reductive elimination of benzene, coordination of PPh₃, and activation of the C H bond of one aromatic ring in PPh₃. [Ir^III(H)(Ph)(PSiP‐R)] catalyzed a direct borylation reaction of the benzene C H bond with bis(pinacolato)diboron. Molecular structures of most of the new complexes in this study were determined by a single‐crystal X‐ray analysis.     

Using Surface Segregation To Design Stable Ru‐Ir Oxides for the Oxygen Evolution Reaction in Acidic Environments

The methods used to improve catalytic activity are well‐established, however elucidating the factors that simultaneously control activity and stability is still lacking, especially for oxygen evolution reaction (OER) catalysts. Here, by studying fundamental links between the activity and stability of well‐characterized monometallic and bimetallic oxides, we found that there is generally an inverse relationship between activity and stability. To overcome this limitation, we developed a new synthesis strategy that is based on tuning the near‐surface composition of Ru and Ir elements by surface segregation, thereby resulting in the formation of a nanosegregated domain that balances the stability and activity of surface atoms. We demonstrate that a Ru_0.5Ir_0.5 alloy synthesized by using this method exhibits four‐times higher stability than the best Ru‐Ir oxygen evolution reaction materials, while still preserving the same activity.     

Highly Effective Water Oxidation Catalysis with Iridium Complexes through the Use of NaIO4

Exceptional water oxidation (WO) turnover frequencies (TOF=17 000 h^?1), and turnover numbers (TONs) close to 400 000, the largest ever reported for a metal‐catalyzed WO reaction, have been found by using [Cp*Ir^III(NHC)Cl₂] (in which NHC=3‐methyl‐1‐(1‐phenylethyl)‐imidazoline‐2‐ylidene) as the pre‐catalyst and NaIO₄ as oxidant in water at 40 °C. The apparent TOF for [Cp*Ir^III(NHC)X₂] ( 1 X , in which X stands for I ( 1 I ), Cl ( 1 Cl ), or triflate anion ( 1 OTf )) and [(Cp*‐NHCMe)Ir^IIII₂] ( 2 ) complexes, is kept constant during almost all of the O₂ evolution reaction when using NaIO₄ as oxidant. The TOF was found to be dependent on the ligand and on the anion (TOF ranging from ≈600 to ≈1100 h^?1 at 25 °C). Degradation of the complexes by oxidation of the organic ligands upon reaction with NaIO₄ has been investigated. ¹H NMR, ESI‐MS, and dynamic light‐scattering measurements (DLS) of the reaction medium indicated that the complex undergoes rapid degradation, even at low equivalents of oxidant, but this process takes place without formation of nanoparticles. Remarkably, three‐month‐old solution samples of oxidized pre‐catalysts remain equally as active as freshly prepared solutions. A UV/Vis feature band at λ_max=405 nm is observed in catalytic reaction solutions only when O₂ evolves, which may be attributed to a resting state iridium speciation, most probably Ir–oxo species with an oxidation state higher than IV.     

Synthesis and luminescence of poly(phenylacetylene)s with pendant iridium complexes and carbazole groups

Poly(phenylacetylene)s containing pendant phosphorescent iridium complexes have been synthesized and their electrochemical, photo‐ and electroluminescent properties studied. The polymers have been synthesized by rhodium‐catalyzed copolymerization of 9‐(4‐ethynylphenyl)carbazole (CzPA) and phenylacetylenes (C∧N)₂Ir(κ²‐O,O′‐MeC(O)CHC(O)C₆H₄C?CH‐4) (C∧N = κ²‐N,C¹‐2‐(pyridin‐2‐yl)phenyl (Ir^ppyPA) or κ²‐N,C¹‐2‐(isoquinolin‐1‐yl)phenyl (Ir^piqPA)). In addition, organic poly(phenylacetylene)s with pendant carbazole groups have been synthesized by rhodium‐catalyzed copolymerization of CzPA and 1‐ethynyl‐4‐pentylbenzene. Complex (C∧N)₂Ir(κ²‐O,O′‐MeC(O)CHC(O)Ph) (Ir^piqPh; C∧N = 2‐(isoquinolin‐1‐yl)phenyl‐κ²‐N,C¹) was prepared and characterized. While the copolymers of the Ir^ppy series were weakly phosphorescent, those of the Ir^piq series displayed at room temperature intense emissions from the carbazole (fluorescence) and iridium (phosphorescence) emitters, being the latter dominant when the spectra were recorded using polymer films. Triple layer OLED devices employing copolymers of the Ir^piq series or the model complex Ir^piqPh yielded electroluminescence with an emission spectra originating from the iridium complex and maximum external quantum efficiencies of 0.46% and 2.99%, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3744–3757, 2010     

Specific “Unlocking” of a Nanozyme-Based Butterfly Effect To Break the Evolutionary Fitness of Chaotic Tumors

Chaos and the natural evolution of tumor systems can lead to the failure of tumor therapies. Herein, we demonstrate that iridium oxide nanoparticles (IrO_x) possess acid-activated oxidase and peroxidase-like functions and wide pH-dependent catalase-like properties. The integration of glucose oxidase (GOD) unlocked the oxidase and peroxidase activities of IrO_x by the production of gluconic acid from glucose by GOD catalysis in cancer cells, and the produced H₂O₂ was converted into O₂ to compensate its consumption in GOD catalysis owing to the catalase-like function of the nanozyme, thus resulting in the continual consumption of glucose and the self-supply of substrates to generate superoxide anion and hydroxyl radical. Moreover, IrO_x can constantly consume glutathione (GSH) by self-cyclic valence alternation of Ir^IV and Ir^III. These cascade reactions lead to a “butterfly effect” of initial starvation therapy and the subsequent pressure of multiple reactive oxygen species (ROS) to completely break the self-adaption of cancer cells.     

A Single‐Atom Iridium Heterogeneous Catalyst in Oxygen Reduction Reaction

Combining the advantages of homogeneous and heterogeneous catalysts, single‐atom catalysts (SACs) are bringing new opportunities to revolutionize ORR catalysis in terms of cost, activity and durability. However, the lack of high‐performance SACs as well as the fundamental understanding of their unique catalytic mechanisms call for serious advances in this field. Herein, for the first time, we develop an Ir‐N‐C single‐atom catalyst (Ir‐SAC) which mimics homogeneous iridium porphyrins for high‐efficiency ORR catalysis. In accordance with theoretical predictions, the as‐developed Ir‐SAC exhibits orders of magnitude higher ORR activity than iridium nanoparticles with a record‐high turnover frequency (TOF) of 24.3 e^? site^?1 s^?1 at 0.85 V vs. RHE) and an impressive mass activity of 12.2 A mg^?1_Ir, which far outperforms the previously reported SACs and commercial Pt/C. Atomic structural characterizations and density functional theory calculations reveal that the high activity of Ir‐SAC is attributed to the moderate adsorption energy of reaction intermediates on the mononuclear iridium ion coordinated with four nitrogen atom sites.     

Photoelectrochemical Hydrogen Production in Alkaline Solutions Using Cu2O Coated with Earth‐Abundant Hydrogen Evolution Catalysts

The splitting of water into hydrogen and oxygen molecules using sunlight is an attractive method for solar energy storage. Until now, photoelectrochemical hydrogen evolution is mostly studied in acidic solutions, in which the hydrogen evolution is more facile than in alkaline solutions. Herein, we report photoelectrochemical hydrogen production in alkaline solutions, which are more favorable than acidic solutions for the complementary oxygen evolution half‐reaction. We show for the first time that amorphous molybdenum sulfide is a highly active hydrogen evolution catalyst in basic medium. The amorphous molybdenum sulfide catalyst and a Ni–Mo catalyst are then deposited on surface‐protected cuprous oxide photocathodes to catalyze sunlight‐driven hydrogen production in 1 M KOH. The photocathodes give photocurrents of ?6.3 mA cm^?2 at the reversible hydrogen evolution potential, the highest yet reported for a metal oxide photocathode using an earth‐abundant hydrogen evolution reaction catalyst.     

Dual Catalysis with an IrIII–AuI Heterodimetallic Complex: Reduction of Nitroarenes by Transfer Hydrogenation using Primary Alcohols

A triazolyl‐di‐ylidene ligand has been used for the preparation of a homodimetallic complex of gold, and a heterodimetallic compound of gold and iridium. Both complexes have been fully characterized and their molecular structures have been determined by means of X‐ray diffraction. The catalytic properties of these two complexes have been evaluated in the reduction of nitroarenes by transfer hydrogenation using primary alcohols. The two complexes afford different reaction products; whereas the Au^I–Au^I catalyst yields a hydroxylamine, the Ir^III–Au^I complex facilitates the formation of an imine.