Enhanced CO2 Adsorption Affinity in a NbO‐type MOF Constructed from a Low‐Cost Diisophthalate Ligand with a Piperazine‐Ring Bridge

A metal–organic framework (NPC‐6) with an NbO topology based on a piperazine ring‐bridged diisophthalate ligand was synthesized and characterized. The incorporated piperazine group leads to an enhanced adsorption affinity for CO₂ in NPC‐6, in which the CO₂ uptake is 4.83 mmol g^?1 at 293 K and 1 bar, ranking among the top values of CO₂ uptake on MOF materials. At 0.15 bar and 293 K, the NPC‐6 adsorbs 1.07 mmol g^?1 of CO₂, which is about 55.1 % higher than that of the analogue MOF NOTT‐101 under the same conditions. The enhanced CO₂ uptake combined with comparable uptakes for CH₄ and N₂ leads to much higher selectivities for CO₂/CH₄ and CO₂/N₂ gas mixtures on NPC‐6 than on NOTT‐101. Furthermore, an N‐alkylation is used in the synthesis of the PDIA ligand, leading to a much lower cost compared with that in the synthesis of ligands in the NOTT series, as the former does not require a palladium‐based catalyst and borate esters. Thus, we conclude that NPC‐6 is a promising candidate for CO₂ capture applications.     

No More HF: Teflon‐Assisted Ultrafast Removal of Silica to Generate High‐Surface‐Area Mesostructured Carbon for Enhanced CO2 Capture and Supercapacitor Performance

An innovative technique to obtain high‐surface‐area mesostructured carbon (2545 m² g^?1) with significant microporosity uses Teflon as the silica template removal agent. This method not only shortens synthesis time by combining silica removal and carbonization in a single step, but also assists in ultrafast removal of the template (in 10 min) with complete elimination of toxic HF usage. The obtained carbon material (JNC‐1) displays excellent CO₂ capture ability (ca. 26.2 wt % at 0 °C under 0.88 bar CO₂ pressure), which is twice that of CMK‐3 obtained by the HF etching method (13.0 wt %). JNC‐1 demonstrated higher H₂ adsorption capacity (2.8 wt %) compared to CMK‐3 (1.2 wt %) at ?196 °C under 1.0 bar H₂ pressure. The bimodal pore architecture of JNC‐1 led to superior supercapacitor performance, with a specific capacitance of 292 F g^?1 and 182 F g^?1 at a drain rate of 1 A g^?1 and 50 A g^?1, respectively, in 1 m H₂SO₄ compared to CMK‐3 and activated carbon.     

Synthesis of High‐Surface‐Area Nitrogen‐Doped Porous Carbon Microflowers and Their Efficient Carbon Dioxide Capture Performance

Sustainable carbon materials have received particular attention in CO₂ capture and storage owing to their abundant pore structures and controllable pore parameters. Here, we report high‐surface‐area hierarchically porous N‐doped carbon microflowers, which were assembled from porous nanosheets by a three‐step route: soft‐template‐assisted self‐assembly, thermal decomposition, and KOH activation. The hydrazine hydrate used in our experiment serves as not only a nitrogen source, but also a structure‐directing agent. The activation process was carried out under low (KOH/carbon=2), mild (KOH/carbon=4) and severe (KOH/carbon=6) activation conditions. The mild activated N‐doped carbon microflowers (A‐NCF‐4) have a hierarchically porous structure, high specific surface area (2309 m² g^?1), desirable micropore size below 1 nm, and importantly large micropore volume (0.95 cm³ g^?1). The remarkably high CO₂ adsorption capacities of 6.52 and 19.32 mmol g^?1 were achieved with this sample at 0 °C (273 K) and two pressures, 1 bar and 20 bar, respectively. Furthermore, this sample also exhibits excellent stability during cyclic operations and good separation selectivity for CO₂ over N₂.     

An Azine‐Linked Covalent Organic Framework: Synthesis,Characterization and Efficient Gas Storage

A azine‐linked covalent organic framework, COF‐JLU2, was designed and synthesized by condensation of hydrazine hydrate and 1,3,5‐triformylphloroglucinol under solvothermal conditions for the first time. The new covalent organic framework material combines permanent micropores, high crystallinity, good thermal and chemical stability, and abundant heteroatom activated sites in the skeleton. COF‐JLU2 possesses a moderate BET surface area of over 410 m² g^?1 with a pore volume of 0.56 cm³ g^?1. Specifically, COF‐JLU2 displays remarkable carbon dioxide uptake (up to 217 mg g^?1) and methane uptake (38 mg g^?1) at 273 K and 1 bar, as well as high CO₂/N₂ (77) selectivity. Furthermore, we further highlight that it exhibits a higher hydrogen storage capacity (16 mg g^?1) than those of reported COFs at 77 K and 1 bar.     

Ultramicroporous Building Units as a Path to Bi‐microporous Metal–Organic Frameworks with High Acetylene Storage and Separation Performance

A strategy called ultramicroporous building unit (UBU) is introduced. It allows the creation of hierarchical bi‐porous features that work in tandem to enhance gas uptake capacity and separation. Smaller pores from UBUs promote selectivity, while larger inter‐UBU packing pores increase uptake capacity. The effectiveness of this UBU strategy is shown with a cobalt MOF (denoted SNNU‐45) in which octahedral cages with 4.5 Å pore size serve as UBUs. The C₂H₂ uptake capacity at 1 atm reaches 193.0 cm³ g^?1 (8.6 mmol g^?1) at 273 K and 134.0 cm³ g^?1 (6.0 mmol g^?1) at 298 K. Such high uptake capacity is accompanied by a high C₂H₂/CO₂ selectivity of up to 8.5 at 298 K. Dynamic breakthrough studies at room temperature and 1 atm show a C₂H₂/CO₂ breakthrough time up to 79 min g^?1, among top‐performing MOFs. Grand canonical Monte Carlo simulations agree that ultrahigh C₂H₂/CO₂ selectivity is mainly from UBU ultramicropores, while packing pores promote C₂H₂ uptake capacity.     

Highly Efficient CO2 Utilization via Aqueous Zinc– or Aluminum–CO2 Systems for Hydrogen Gas Evolution and Electricity Production

Atmospheric carbon dioxide (CO₂) has increased from 278 to 408 parts per million (ppm) over the industrial period and has critically impacted climate change. In response to this crisis, carbon capture, utilization, and storage/sequestration technologies have been studied. So far, however, the economic feasibility of the existing conversion technologies is still inadequate owing to sluggish CO₂ conversion. Herein, we report an aqueous zinc– and aluminum–CO₂ system that utilizes acidity from spontaneous dissolution of CO₂ in aqueous solution to generate electrical energy and hydrogen (H₂). The system has a positively shifted onset potential of hydrogen evolution reaction (HER) by 0.4 V compared to a typical HER under alkaline conditions and facile HER kinetics with low Tafel slope of 34 mV dec^?1. The Al–CO₂ system has a maximum power density of 125 mW cm^?2 which is the highest value among CO₂ utilization electrochemical system.     

Synthesis and Characterization of Functional Thienyl‐Phosphine Microporous Polymers for Carbon Dioxide Capture

A novel kind of functional organic microporous polymer is designed by introducing polar organic groups (P=O and P=S) and electron‐rich heterocyclic into the framework to obtain high carbon dioxide capture capacity. The estimated Brunauer–Emmett–Teller (BET) surface areas of these polymers are about 600 m² g⁻¹ and the highest CO₂ uptake is 2.26 mmol g⁻¹ (1.0 bar/273 K). Interestingly, the polymer containing P=O groups shows greater CO₂ capture capacity than that containing P=S groups at the same temperature. In addition, these polymers show high isosteric heats of CO₂ adsorption (28.6 kJ mol⁻¹), which can be competitive with some nitrogen‐rich networks. Therefore, these microporous polymers are promising candidates for carbon dioxide capture.

     

A Robust 3D Cage‐like Ultramicroporous Network Structure with High Gas‐Uptake Capacity

A three‐dimensional (3D) cage‐like organic network (3D‐CON) structure synthesized by the straightforward condensation of building blocks designed with gas adsorption properties is presented. The 3D‐CON can be prepared using an easy but powerful route, which is essential for commercial scale‐up. The resulting fused aromatic 3D‐CON exhibited a high Brunauer–Emmett–Teller (BET) specific surface area of up to 2247 m² g^?1. More importantly, the 3D‐CON displayed outstanding low pressure hydrogen (H₂, 2.64 wt %, 1.0 bar and 77 K), methane (CH₄, 2.4 wt %, 1.0 bar and 273 K), and carbon dioxide (CO₂, 26.7 wt %, 1.0 bar and 273 K) uptake with a high isosteric heat of adsorption (H₂, 8.10 kJ mol^?1; CH₄, 18.72 kJ mol^?1; CO₂, 31.87 kJ mol^?1). These values are among the best reported for organic networks with high thermal stability (ca. 600 °C).     

Temperature‐Responsive Microgel Films as Reversible Carbon Dioxide Absorbents in Wet Environment

Hydrogel films composed of temperature‐responsive microgel particles (GPs) containing amine groups work as stimuli‐responsive carbon dioxide absorbent with a high capacity of approximately 1.7 mmol g^?1. Although the dried films did not show significant absorption, the reversible absorption capacity dramatically increased by adding a small amount of water (1 mL g^?1). The absorption capacity was independent of the amount of added water beyond 1 mL g^?1, demonstrating that the GP films can readily be used under wet conditions. The amount of CO₂ absorbed by the GP films was proportional to their thickness up to 200–300 μm (maximum capacity of about 2 L m^?2). Furthermore, the films consisting of GPs showed faster and greater absorption and desorption of CO₂ than that of monolithic hydrogel films. These results indicated the importance of a fast stimulus response rate of the films that are composed of GPs in order to achieve long‐range and fast diffusion of bicarbonate ions. Our study revealed the potential of stimuli‐responsive GP films as energy‐efficient absorbents to sequester CO₂ from high‐humidity exhaust gases.     

Porous‐Organic‐Framework‐Templated Nitrogen‐Rich Porous Carbon as a More Proficient Electrocatalyst than Pt/C for the Electrochemical Reduction of Oxygen

Porous nitrogen‐rich carbon (POF‐C‐1000) that was synthesized by using a porous organic framework (POF) as a self‐sacrificing host template in a nanocasting process possessed a high degree of graphitization in an ordered structural arrangement with large domains and well‐ordered arrays of carbon sheets. POF‐C‐1000 exhibits favorable electrocatalytic activity for the oxygen‐reduction reaction (ORR) with a clear positive shift of about 40 mV in the onset potential compared to that of a traditional, commercially available Pt/C catalyst. In addition, irrespective of its moderate surface area (785 m² g^?1), POF‐C‐1000 showed a reasonable H₂ adsorption of 1.6 wt % (77 K) and a CO₂ uptake of 3.5 mmol g^?1 (273 K).     

Rechargeable Room‐Temperature Na–CO2 Batteries

Developing rechargeable Na–CO₂ batteries is significant for energy conversion and utilization of CO₂. However, the reported batteries in pure CO₂ atmosphere are non‐rechargeable with limited discharge capacity of 200 mAh g^?1. Herein, we realized the rechargeability of a Na–CO₂ battery, with the proposed and demonstrated reversible reaction of 3 CO₂+4 Na?2 Na₂CO₃+C. The battery consists of a Na anode, an ether‐based electrolyte, and a designed cathode with electrolyte‐treated multi‐wall carbon nanotubes, and shows reversible capacity of 60000 mAh g^?1 at 1 A g^?1 (≈1000 Wh kg^?1) and runs for 200 cycles with controlled capacity of 2000 mAh g^?1 at charge voltage <3.7 V. The porous structure, high electro‐conductivity, and good wettability of electrolyte to cathode lead to reduced electrochemical polarization of the battery and further result in high performance. Our work provides an alternative approach towards clean recycling and utilization of CO₂.     

Directing the Structural Features of N2‐Phobic Nanoporous Covalent Organic Polymers for CO2 Capture and Separation

A family of azo‐bridged covalent organic polymers (azo‐COPs) was synthesized through a catalyst‐free direct coupling of aromatic nitro and amine compounds under basic conditions. The azo‐COPs formed 3D nanoporous networks and exhibited surface areas up to 729.6 m² g^?1, with a CO₂‐uptake capacity as high as 2.55 mmol g^?1 at 273 K and 1 bar. Azo‐COPs showed remarkable CO₂/N₂ selectivities (95.6–165.2) at 298 K and 1 bar. Unlike any other porous material, CO₂/N₂ selectivities of azo‐COPs increase with rising temperature. It was found that azo‐COPs show less than expected affinity towards N₂ gas, thus making the framework “N₂‐phobic”, in relative terms. Our theoretical simulations indicate that the origin of this unusual behavior is associated with the larger entropic loss of N₂ gas molecules upon their interaction with azo‐groups. The effect of fused aromatic rings on the CO₂/N₂ selectivity in azo‐COPs is also demonstrated. Increasing the π‐surface area resulted in an increase in the CO₂‐philic nature of the framework, thus allowing us to reach a CO₂/N₂ selectivity value of 307.7 at 323 K and 1 bar, which is the highest value reported to date. Hence, it is possible to combine the concepts of “CO₂‐philicity” and “N₂‐phobicity” for efficient CO₂ capture and separation. Isosteric heats of CO₂ adsorption for azo‐COPs range from 24.8–32.1 kJ mol^?1 at ambient pressure. Azo‐COPs are stable up to 350 °C in air and boiling water for a week. A promising cis/trans isomerization of azo‐COPs for switchable porosity is also demonstrated, making way for a gated CO₂ uptake.     

Synthesis of Porous Covalent Quinazoline Networks (CQNs) and Their Gas Sorption Properties

The development of different classes of porous polymers by linking organic molecules using new chemistries still remains a great challenge. Herein, we introduce for the first time the synthesis of covalent quinazoline networks (CQNs) using an ionothermal synthesis protocol. Zinc chloride (ZnCl₂) was used as the solvent and catalyst for the condensation of aromatic ortho‐aminonitriles to produce tricycloquinazoline linkages. The resulting CQNs show a high porosity with a surface area up to 1870 m² g^?1. Varying the temperature and the amount of catalyst enables us to control the surface area as well as the pore size distribution of the CQNs. Furthermore, their high nitrogen content and significant microporosity make them a promising CO₂ adsorbent with a CO₂ uptake capacity of 7.16 mmol g^?1 (31.5 wt %) at 273 K and 1 bar. Because of their exceptional CO₂ sorption properties, they are promising candidates as an adsorbent for the selective capture of CO₂ from flue gas.     

Solid Amine Adsorbent Prepared by Molecular Imprinting and Its Carbon Dioxide Adsorption Properties

A carbon dioxide imprinted solid amine adsorbent (IPEIA‐R) with polyethylenimine (PEI) as a skeleton was conveniently prepared by using glutaraldehyde to cross‐link carbon dioxide‐preadsorbed PEI. As confirmed by FTIR, FT‐Raman, and ¹³C NMR spectroscopy, CO₂ preadsorbed on PEI could occupy the reactive sites of amino groups and act as a template for imprinting in the cross‐linking process. The imino groups formed from the cross‐linking reaction between glutaraldehyde and PEI could be reduced by NaBH₄ to form CO₂‐adsorbable amino groups. The adsorption results indicated that CO₂ imprinting and reduction of imino groups by NaBH₄ endowed the adsorbent with a higher CO₂ adsorption capacity. Compared with PEI‐supported mesoporous adsorbents, the solid amine adsorbent with PEI as a skeleton can avoid serious pore blockage and CO₂ diffusion resistance, even with a high amine content. The solid amine adsorbent with PEI as a skeleton showed a remarkable CO₂ adsorption capacity (8.56 mmol g^?1) in the presence of water at 25 °C, owing to the high amine content and good swelling properties. It also showed promising regeneration performance and could maintain almost the same CO₂ adsorption capacity after 15 adsorption–desorption cycles.     

Control of Interpenetration and Gas‐Sorption Properties of Metal–Organic Frameworks by a Simple Change in Ligand Design

In metal–organic framework (MOF) chemistry, interpenetration greatly affects the gas‐sorption properties. However, there is a lack of a systematic study on how to control the interpenetration and whether the interpenetration enhances gas uptake capacities or not. Herein, we report an example of interpenetration that is simply controlled by the presence of a carbon–carbon double or single bond in identical organic building blocks, and provide a comparison of gas‐sorption properties for these similar frameworks, which differ only in their degree of interpenetration. Noninterpenetrated ( SNU‐70 ) and doubly interpenetrated ( SNU‐71 ) cubic nets were prepared by a solvothermal reaction of [Zn(NO₃)₂] ? 6 H₂O in N,N‐diethylformamide (DEF) with 4‐(2‐carboxyvinyl)benzoic acid and 4‐(2‐carboxyethyl)benzoic acid, respectively. They have almost‐identical structures, but the noninterpenetrated framework has a much bigger pore size (ca. 9.0×9.0 Å) than the interpenetrated framework (ca. 2.5×2.5 Å). Activation of the MOFs by using supercritical CO₂ gave SNU‐70′ and SNU‐71′ . The simulation of the PXRD pattern of SNU‐71′ indicates the rearrangement of the interpenetrated networks on guest removal, which increases pore size. SNU‐70′ has a Brunauer–Emmett–Teller (BET) surface area of 5290 m² g^?1, which is the highest value reported to date for a MOF with a cubic‐net structure, whereas SNU‐71′ has a BET surface area of 1770 m² g^?1. In general, noninterpenetrated SNU‐70′ exhibits much higher gas‐adsorption capacities than interpenetrated SNU‐71′ at high pressures, regardless of the temperature. However, at P<1 atm, the gas‐adsorption capacities for N₂ at 77 K and CO₂ at 195 K are higher for noninterpenetrated SNU‐70′ than for interpenetrated SNU‐71′ , but the capacities for H₂ and CH₄ are the opposite; SNU‐71′ has higher uptake capacities than SNU‐70′ due to the higher isosteric heat of gas adsorption that results from the smaller pores. In particular, SNU‐70′ has exceptionally high H₂ and CO₂ uptake capacities. By using a post‐synthetic method, the C?C double bond in SNU‐70 was quantitatively brominated at room temperature, and the MOF still showed very high porosity (BET surface area of 2285 m² g^?1).     

High CO2‐Capture Ability of a Porous Organic Polymer Bifunctionalized with Carboxy and Triazole Groups

A new porous organic polymer, SNU‐C1 , incorporating two different CO₂‐attracting groups, namely, carboxy and triazole groups, has been synthesized. By activating SNU‐C1 with two different methods, vacuum drying and supercritical‐CO₂ treatment, the guest‐free phases, SNU‐C1‐va and SNU‐C1‐sca , respectively, were obtained. Brunauer–Emmett–Teller (BET) surface areas of SNU‐C1‐va and SNU‐C1‐sca are 595 and 830 m²g^?1, respectively, as estimated by the N₂‐adsorption isotherms at 77 K. At 298 K and 1 atm, SNU‐C1‐va and SNU‐C1‐sca show high CO₂ uptakes, 2.31 mmol g^?1 and 3.14 mmol g^?1, respectively, the high level being due to the presence of abundant polar groups (carboxy and triazole) exposed on the pore surfaces. Five separation parameters for flue gas and landfill gas in vacuum‐swing adsorption were calculated from single‐component gas‐sorption isotherms by using the ideal adsorbed solution theory (IAST). The data reveal excellent CO₂‐separation abilities of SNU‐C1‐va and SNU‐C1‐sca , namely high CO₂‐uptake capacity, high selectivity, and high regenerability. The gas‐cycling experiments for the materials and the water‐treated samples, experiments that involved treating the samples with a CO₂‐N₂ gas mixture (15:85, v/v) followed by a pure N₂ purge, further verified the high regenerability and water stability. The results suggest that these materials have great potential applications in CO₂ separation.     

Equilibrium isotherms and isosteric heat for CO<Subscript>2</Subscript> adsorption on nanoporous carbons from polymers

Four nanoporous carbons obtained from different polymers: polypyrrole, polyvinylidene fluoride, sulfonated styrene–divinylbenzene resin, and phenol–formaldehyde resin, were investigated as potential adsorbents for carbon dioxide. CO₂ adsorption isotherms measured at eight temperatures between 0 and 60 °C were used to study adsorption properties of these polymer-derived carbons, especially CO₂ uptakes at ambient pressure and different temperatures, working capacity, and isosteric heat of adsorption. The specific surface areas and the volumes of micropores and ultramicropores estimated for these materials by using the density functional theory-based software for pore size analysis ranged from 840 to 1990 m² g^?1, from 0.22 to 1.47 cm³ g^?1, and from 0.18 to 0.64 cm³ g^?1, respectively. The observed differences in the nanoporosity of these carbons had a pronounced effect on the CO₂ adsorption properties. The highest CO₂ uptakes, 6.92 mmol g^?1 (0 °C, 1 atm) and 1.89 mmol g^?1 (60 °C, 1 atm), were obtained for the polypyrrole-derived activated carbon prepared through a single carbonization-KOH activation step. The working capacity for this adsorbent was estimated to be 3.70 mmol g^?1. Depending on the adsorbent, the CO₂ isosteric heats of adsorption varied from 32.9 to 16.3 kJ mol^?1 in 0–2.5 mmol g^?1 range. Overall, the carbons studied showed well-developed microporosity and exceptional CO₂ adsorption, which make them viable candidates for CO₂ capture, and for other adsorption and environmental-related applications.     

A Carbon-Negative Hydrogen Production Strategy: CO2 Selective Capture with H2 Production

We reported a strategy of carbon-negative H₂ production in which CO₂ capture was coupled with H₂ evolution at ambient temperature and pressure. For this purpose, carbonate-type Cu_xMg_yFe_z layered double hydroxide (LDH) was preciously constructed, and then a photocatalysis reaction of interlayer CO₃²⁻ reduction with glycerol oxidation was performed as driving force to induce the electron storage on LDH layers. With the participation of pre-stored electrons, CO₂ was captured to recover interlayer CO₃²⁻ in presence of H₂O, accompanied with equivalent H₂ production. During photocatalysis reaction, Cu_0.6Mg_1.4Fe₁ exhibited a decent CO evolution amount of 1.63 mmol g⁻¹ and dihydroxyacetone yield of 3.81 mmol g⁻¹. In carbon-negative H₂ production process, it showed an exciting CO₂ capture quantity of 1.61 mmol g⁻¹ and H₂ yield of 1.44 mmol g⁻¹. Besides, this system possessed stable operation capability under simulated flu gas condition with negligible performance loss, exhibiting application prospect.     

A synthesis of porous activated carbon materials derived from vitamin B9 base for CO2 capture and conversion

CO₂ capture and conversion are still a favorable way to reduce CO₂ in the atmosphere. Herein, we have developed an environmentally friendly, low energy consumption porous activated carbon from vitamin B9 carbonaceous material for CO₂ capture and conversion materials. It is demonstrated that the KOH/vitamin B9 carbonaceous material impregnation ratio of 2 is the optimum condition for obtaining porous activated carbons with high specific surface area of 1903 m²g^-1, micropore surface area of 710 m²g^-1, total pore volume of 1.05 cm³g^-1 and micropore volume of 0.38 cm³g^-1. Among all the porous activated carbons prepared, the porous activated carbon synthesized with the KOH/vitamin B9 carbonaceous material impregnation ratio of 2 registers the most excellent CO₂ capture for 5.41 mmolg^?1 at 0 °C/1 bar and 3.66 mmolg^?1 at 25 °C/1 bar. They can also effectively catalyze the cycloaddition of CO₂ and epoxides under mild conditions (1 bar, 100 °C and 8 h) with a yield of 89–94%. The synthesized porous carbon materials from vitamin B9 is a promising candidate material for CO₂ capture and fixation.     

Synthesis of Nanostructured Carbon through Ionothermal Carbonization of Common Organic Solvents and Solutions

A combination of ionothermal synthesis and hot‐injection techniques leads to novel nanocarbons made from organic solvents. Controlled addition of commonly used organic solvents into a hot ZnCl₂ melt gives rise to spherical, sheetlike, and branched nanofibrous carbon nanoparticles with surprisingly high carbon efficiency. When heteroatom‐containing solvents were used, the doping levels reach up to 14 wt. % nitrogen and 13 wt. % sulfur. Materials with high surface areas and large pore volumes of solvent carbons as high as 1666 m² g^?1 and 2.80 cm³ g^?1 in addition to CO₂ adsorption capacities of 4.13 mmol g^?1 at 273 K and 1 bar can be obtained. The new method works not only for pure carbon materials, but was also extended for the synthesis of carbon/inorganic nanocomposites. ZnS@C, Ni@C, and Co@C were successfully prepared with this straightforward procedure. The obtained Ni@C nanocomposites perform well in the electrocatalytic water oxidation, comparable with commercial noble‐metal catalysts.