Two-photon absorption of photochromic diarylethene and its application to rewritable holographic recording

A new photochromic diarylethene (1a) has been prepared. Both its photochromic behavior and nonlinear optical properties are investigated. 1a shows excellent ring-opening (λ_max = 386 nm) and ring-closing (λ_max = 652 nm) photoisomerization with UV-Vis light irradiation. With 800 nm femtosecond pulsed laser irradiation, 1a shows two-photon-induced photoisomerization, and a two-photon absorption cross-section (σ = 423×10⁵⁰ cm⁴·s per photon) is obtained by using two-photon induced fluorescence method. The applications of two-photon absorption of 1a to holographic recording has been also investigated. A two-photon induced micro-pattern is recorded on the diarylethene 1a-PMMA film with an femtosecond laser of 800 nm, 100 fs, 1 kHz, 50 mW.     

A Combination of Selective Light Reflection and Fluorescence Modulation in a Cholesteric Polymer Matrix

Summary: The phase behavior and optical properties of a cholesteric ternary copolymer, containing nematogenic phenylbenzoate, cholesteric, and photochromic diarylethene side groups, and its mixture with 2 wt.‐% fluorescent dopant were studied. The investigation of the kinetics of a photochemical opening‐cycle process of the photochromic groups in the cholesteric mixture proved the energy transfer from the fluorescent dopant to the photochromic diarylethene groups. It was shown that the fluorescence intensity of the fluorescent dopant could be controlled by the portion of the “closed” form of the diarylethene groups. During the photocyclization of the photochromic groups a “degeneration” of the selective light reflection of the cholesteric matrix is observed.

Fluorescence‐resonance energy transfer makes possible the process of photosensitization of the back ring‐opening photoreaction of the photochromic diarylethene groups in the cholesteric polymer matrix.     

Construction of Highly Emissive Pt(II) Metallacycles upon Irradiation

Photoswitchable or photoactivatable fluorescent species have been found wide applications within supramolecular chemistry and materials science. In this study, we successfully constructed two highly emissive Pt(II) metallacycles from the diarylethene ligands via coordination‐driven self‐assembly. Different from the most known fluorescent metallacycles, the obtained metallacycles have displayed “turn‐on” fluorescence switching. They are non‐fluorescent in solution, but they emit highly yellow or orange fluorescence under ultraviolet irradiation. The metallacycles were well characterized by ¹H NMR, ³¹P NMR and ESI‐TOF‐MS. The photochromic properties of the resultant metallacycles were investigated by ¹H NMR, ³¹P NMR, UV/Vis spectrum and fluorescence spectrum. Notably, NMR studies revealed that these two metallacycles featured excellent cyclization efficiency (90% conversion efficiency). Moreover, the closed‐ring isomers of the metallacycles displayed relatively high quantum yield (Φ_F = 0.5). DFT simulations demonstrated that the antiparallel configuration of the diarylethene ligand had an angle closed to 120°, which was more stable in energy compared to the parallel configuration, thus allowing for the facile construction of highly emissive metallacycles. We believe that such highly emissive metallacycles which are in‐situ prepared upon irradiation can be used as new fluorescence materials for sensing and bioimaging in the future.     

DFT/TDDFT Investigation of the Modulation of Photochromic Properties in an Organoboron‐Based Diarylethene by Fluoride Ions

The diarylethene derivative 1,2‐bis‐(5′‐dimesitylboryl‐2′‐methylthieny‐3′‐yl)‐cyclopentene ( 1 ) containing dimesitylboryl groups is an interesting photochromic material. The dimesitylboryl groups can bind to F^?, which tunes the optical and electronic properties of the diarylethene compound. Hence, the diarylethene derivative 1 containing dimesitylboryl groups is sensitive to both light and F^?, and its photochromic properties can be tuned by a fluoride ion. Herein, we studied the substituent effect of dimesitylboron groups on the optical properties of both the closed‐ring and open‐ring isomers of the diarylethene molecule by DFT/TDDFT calculations and found that these methods are reliable for the determination of the lowest singlet excitation energies of diarylethene compounds. The introduction of dimesitylboron groups to the diarylethene compound can elongate its conjugation length and change the excited‐state properties from π→π* transition to a charge‐transfer state. This explains the modulation of photochromic properties through the introduction of dimesitylboron groups. Furthermore, the photochromic properties can be tuned through the binding of F^? to a boron center and the excited state of the diarylethene compound is changed from a charge‐transfer state to a π→π* transition. Hence, a subtle control of the photochromic spectroscopic properties was realized. In addition, the changes of electronic characteristics by the isomerization reaction of diarylethene compounds were also investigated with theoretical calculations. For the model compound 2 without dimesitylboryl groups, the closed‐ring isomer has better hole‐ and electron‐injection abilities, as well as higher charge‐transport rates, than the open‐ring isomer. The introduction of dimesitylboron groups to diarylethene can dramatically improve the charge‐injection and ‐transport abilities. The closed isomer of compound 1 ( 1 C ) has the best hole‐ and electron‐injection abilities, whereas the charge‐transport rates of the open isomer of compound 1 ( 1 O ) are higher than those of 1 C . Importantly, 1 O is an electron‐accepting and ‐transport material. These results show that the diarylethene compound containing dimesitylboryl groups has promising potential to be applied in optoelectronic devices and thus is worth to be further investigated.     

Synthesis of a new diarylethene diradical which has extended π-conjugated chains from the 2,5-position of one thiophene ring

A diarylethene diradical having a new switching unit for intramolecular magnetic interaction was synthesized. The photoswitching unit has an extended π-conjugated chain in one aryl unit, and two nitronyl nitroxide radical are placed at both ends of the π-conjugated chain. The diarylethene moiety is located in the middle of the chain. This diarylethene is designed to change the hybrid orbital from sp² to sp³ at the 2-position of the thiophene ring when this diarylethene undergoes a photochromic reaction. But the new diradical compound did not undergo photocyclic reaction upon irradiation with UV light. The photochemical behavior is perturbed by a resonant quinoid structure which stabilizes the open-ring isomer.     

Cholesteric mixture containing chiral‐photochromic and diarylethene dopants as novel material with dual photochromism

New cholesteric polymeric mixture containing nematic side‐chain homopolymer, 2 wt% of photochromic diarylethene dopant and 5 wt% of chiral‐photochromic dopant based on cinnamic acid and isosorbide was prepared. Upon UV irradiation of planarly‐oriented mixture films at room temperature, a transformation of open colorless form of diarylethene dopant into a closed colored form takes place, which is followed by the appearance of an intense absorption maximum in the visible spectral region and decreasing selective light reflection intensity. This process is photo‐ and thermo‐reversible and many cycles ‘recording‐erasing’ can be realized. UV irradiation and subsequent annealing of the films lead to untwisting of the cholesteric helix and cause an irreversible shift of selective light reflection to the long‐wavelength region. This process is explained by the E‐Z isomerization of chiral photochromic groups of the dopant relative to a C?C bond accompanied by a decrease in their twisting ability. It has been shown, that the use of the material prepared in this work provides an opportunity to record two images at the same time: one image is due to a change in the helical pitch and another (second) image is due to the photochromism of diarylethene dopant. It is pertinent to note that using the approach developed in this work allows one to widely vary the range of materials exhibiting dual photochromism. It was demonstrated that the mixture under study shows advantage as new photosensitive material for optics, optoelectronics and data recording. Copyright © 2002 John Wiley & Sons, Ltd.     

Thermodynamic Phase Transition Through Crystal‐to‐Crystal Process of Photochromic 1,2‐Bis(5‐phenyl‐2‐propyl‐3‐thienyl)perfluorocyclopentene

A photochromic diarylethene, 1,2‐bis(5‐phenyl‐2‐propyl‐3‐thienyl)perfluorocyclopentene ( 1a ), was found to have two polymorphic crystal forms, α‐ and β‐crystals. From X‐ray crystallographic analysis, the space groups of α‐ and β‐crystals were determined to be P2₁/c and C2/c, respectively. The difference between two crystal forms is ascribed to the orientation of two of four molecules in the unit cell. The thermodynamic phase transition from α‐ to β‐forms occurred via a crystal‐to‐crystal process, as confirmed by differential scanning calorimetry measurements, optical microscopic observations in the reflection mode and under crossed Nicols, and powder X‐ray diffraction measurements. The movement of the molecules in the crystal was evaluated by analyzing the change of face indices before and after the phase transition.     

Synthesis of photochromic diarylethene polymers for a write-by-light/erase-by-heat recording system

A functionalized styrene monomer (1a) having a photochromic diarylethene chromophore with functional properties of photocoloration, photostability of the colored state, and thermal erasion by heating was synthesized, and the polymer and copolymers of 1a were prepared by radical polymerization and copolymerization. Their polymers exhibited excellent photocoloration and rapid thermal bleaching above 150 °C in solution and in the solid state as well as the performance of the monomeric diarylethene chromophore. In addition, the colored state has a high photostability under visible room light. The diarylethene homopolymer had a glass transition temperature (T_g) as high as polystyrene. The copolymer of 1a with N-1-adamantylmaleimide exhibited extremely high T_g above 200 °C with keeping the photofunctional performance. Such photochromic polymer and copolymers with high T_g can be potentially applied to rewritable display materials and image recordings by a write-by-light/erase-by-heat system.     

Metal–Organic‐Framework‐Derived Hollow N‐Doped Porous Carbon with Ultrahigh Concentrations of Single Zn Atoms for Efficient Carbon Dioxide Conversion

The development of efficient and low energy‐consumption catalysts for CO₂ conversion is desired, yet remains a great challenge. Herein, a class of novel hollow porous carbons (HPC), featuring well dispersed dopants of nitrogen and single Zn atoms, have been fabricated, based on the templated growth of a hollow metal–organic framework precursor, followed by pyrolysis. The optimized HPC‐800 achieves efficient catalytic CO₂ cycloaddition with epoxides, under light irradiation, at ambient temperature, by taking advantage of an ultrahigh loading of (11.3 wt %) single‐atom Zn and uniform N active sites, high‐efficiency photothermal conversion as well as the hierarchical pores in the carbon shell. As far as we know, this is the first report on the integration of the photothermal effect of carbon‐based materials with single metal atoms for catalytic CO₂ fixation.     

Nonsymmetrical Dithienylethenes Bearing Dithieno[3,2‐b:2′,3′‐d]thiophene Units with Photochromic Performance in the Crystalline Phase

Four novel nonsymmetrical photochromic diarylethene compounds containing dithieno[3,2‐b:2′,3′‐d]thiophene units were designed and synthesized to investigate their photochromic properties. All these molecules adopt a photoactive antiparallel conformation in single crystals, as revealed by X‐ray crystallographic analysis, and exhibit excellent photochromism in solution as well as in the crystalline phase.     

Synthesis and photochromic reactivity of a new class of photochromic diarylethene dimer-containing dithieno[3,2-b:2′3′-d]thiophene

Novel photochromic diarylethene dimers containing dithieno[3,2-b:2′3′-d]thiophene were synthesized and their photochromic properties were studied in solution as well as in the crystalline phase. Only the isomer with the diarylethene units one in open-form and one in closed-form was produced upon irradiation with ultraviolet light because of the intramolecular excitation energy transfer in this isomer. Their electrochemical properties were also investigated associating with computational studies.     

Significant Enhancement of C2H2/C2H4 Separation by a Photochromic Diarylethene Unit: A Temperature‐ and Light‐Responsive Separation Switch

A dual temperature‐ and light‐responsive C₂H₂/C₂H₄ separation switch in a diarylethene metal–organic framework (MOF) is presented. At 195 K and 100 kPa this MOF shows ultrahigh C₂H₂/C₂H₄ selectivity of 47.1, which is almost 21.4 times larger than the corresponding value of 2.2 at 293 K and 100 kPa, or 15.7 times larger than the value of 3.0 for the material under UV at 195 K and 100 kPa. The origin of this unique control in C₂H₂/C₂H₄ selectivity, as unveiled by density functional calculations, is due to a guest discriminatory gate‐opening effect from the diarylethene unit.     

Studies on Photocatalytic CO2 Reduction over NH2‐Uio‐66(Zr) and Its Derivatives: Towards a Better Understanding of Photocatalysis on Metal–Organic Frameworks

Metal–organic framework (MOF) NH₂‐Uio‐66(Zr) exhibits photocatalytic activity for CO₂ reduction in the presence of triethanolamine as sacrificial agent under visible‐light irradiation. Photoinduced electron transfer from the excited 2‐aminoterephthalate (ATA) to Zr oxo clusters in NH₂‐Uio‐66(Zr) was for the first time revealed by photoluminescence studies. Generation of Zr^III and its involvement in photocatalytic CO₂ reduction was confirmed by ESR analysis. Moreover, NH₂‐Uio‐66(Zr) with mixed ATA and 2,5‐diaminoterephthalate (DTA) ligands was prepared and shown to exhibit higher performance for photocatalytic CO₂ reduction due to its enhanced light adsorption and increased adsorption of CO₂. This study provides a better understanding of photocatalytic CO₂ reduction over MOF‐based photocatalysts and also demonstrates the great potential of using MOFs as highly stable, molecularly tunable, and recyclable photocatalysts in CO₂ reduction.     

Photomobile Polymer Materials: Photoresponsive Behavior of Cross‐Linked Liquid‐Crystalline Polymers with Mesomorphic Diarylethenes

Cross‐linked liquid‐crystalline (LC) polymers with a mesomorphic diarylethene were prepared to demonstrate a versatile strategy for cross‐linked photochromic LC polymers as photomobile materials. Upon exposure to UV light to cause photocyclization of the diarylethene chromophore, the cross‐linked polymer films bend toward an actinic light source. By irradiation with visible light to cause a closed‐ring to open‐ring isomerization, the bent films revert to the initial flat state. Without visible‐light irradiation, the bent films remain bent even at 120 °C, indicating high thermal stability of the cross‐linked diarylethene LC polymers.     

Characterization and photophysical properties of sulfur-oxidized diarylethenes

Controlled oxidation of sulfur atoms in benzothiophene rings of a photochromic diarylethene, 1,2-bis(2-methyl-1-benzothiophene-3-yl)perfluorocyclopentene (BTF6) by 3-chloroperbenzoic acid afforded various oxidation products such as BTFO1, BTFO2, and BTFO4. Upon irradiation with UV light, colorless o-BTFO1 and o-BTFO2 turned to red color, whereas colorless o-BTFO4 turned to yellow color. Theoretical calculation was performed to understand the absorption spectra of closed-ring isomers. All of those compounds returned back to their open-ring isomers upon irradiation with visible light. The cyclization conversions of BTFOn (n=1, 2, and 4) at the photostationary state are higher than that of BTF6. Interestingly, in the case of BTFO1, because of the unsymmetrical environment around the sulfoxide subunit in the molecule, the diastereoselective photocyclization was observed in 25% de. In addition, c-BTFO2 and c-BTFO4 also exhibited a marked fatigue resistance and strong fluorescence, respectively. Oxidation state of sulfur atom in a diarylethene can play an important role in determining its photophysical and photochromic properties.     

Multicomponent Domino [4+1+1] Carbocyclization Providing an Efficient and Regioselective Strategy to Fluoren-9-ones

Concise and efficient three‐component domino [4+1+1] carbocyclization to highly substituted fluoren‐9‐one derivatives promoted by K₂CO₃ has been developed under microwave irradiation conditions. The direct bis‐cyanation and aryl amination residing in fluoren‐9‐one framework were achieved in a one‐pot operation. The reaction proceeds at fast rates and can be finished within 30 min, which makes workup convenient to give good to excellent chemical yields.     

Giant Hysteretic Sorption of CO2: In Situ Crystallographic Visualization of Guest Binding within a Breathing Framework at 298 K

A dynamic Zn^II‐MOF has been shown to exhibit extreme breathing behavior under gas pressure. The very narrow pore form of the activated framework opens up in the presence of carbon dioxide, thus making it a suitable material for CO₂ capture. Sorption of CO₂ at 298 K and relatively high pressure clearly shows a two‐step isotherm with giant hysteresis for the second step. In‐situ single‐crystal diffraction analysis was carried out under CO₂ gas pressure at 298 K using an environmental gas cell in order to visualize the interaction between CO₂ and the host framework. The results are well supported by pressure‐gradient differential scanning calorimetry (P‐DSC) and variable‐pressure powder X‐ray analysis. Theoretical calculations have been carried out in order to further back up the crystallographic data.     

Highly Selective Photoreduction of CO2 with Suppressing H2 Evolution over Monolayer Layered Double Hydroxide under Irradiation above 600 nm

Although progress has been made to improve photocatalytic CO₂ reduction under visible light (λ>400 nm), the development of photocatalysts that can work under a longer wavelength (λ>600 nm) remains a challenge. Now, a heterogeneous photocatalyst system consisting of a ruthenium complex and a monolayer nickel‐alumina layered double hydroxide (NiAl‐LDH), which act as light‐harvesting and catalytic units for selective photoreduction of CO₂ and H₂O into CH₄ and CO under irradiation with λ>400 nm. By precisely tuning the irradiation wavelength, the selectivity of CH₄ can be improved to 70.3 %, and the H₂ evolution reaction can be completely suppressed under irradiation with λ>600 nm. The photogenerated electrons matching the energy levels of photosensitizer and m‐NiAl‐LDH only localized at the defect state, providing a driving force of 0.313 eV to overcome the Gibbs free energy barrier of CO₂ reduction to CH₄ (0.127 eV), rather than that for H₂ evolution (0.425 eV).     

具有多个光致变色单元的二芳基乙烯分子光密度的增加

3,4-Diaryl-2,5-dihydropyrrole with multiphotochromophore units la was synthesized and its photochromic properties were investigated. It showed that all photochromophore units underwent reversible ring-opening （1a） and ring-closing （1b） photoisomerization reactions in both solution and polymer film with UV/Vis light irradiation, and photochromic properties of la were similar to those of photochromic diarylethene with monophotochromophore 2a. It was found that the optical density of lb was increased linearly with increase of the photochromophore units by comparison with that of 2b in the same condition. It was also found that no significant changes in absorption band and response time between diarylethenes with multiphotochromophores and monophotochromophore were detected in the same condition.     

The allomorphism of a photochromic diarylethene

The photochromic diarylethene, 1,2-bis(2-methyl-5-(2,2′-dicyanovinyl)-thien-3-yl)perfluorocyclopentene (1a), was synthesized by a novel method. Two kinds of single crystals of the compound were obtained depending on the different recrystallization conditions and their structures were determined by X-ray crystallographic analysis. Allomorphism of the photochromic diarylethene was discovered. The compound underwent a photochromic reaction both in solution and in the single crystalline phase of the anti-parallel conformer.