Optical and electrical properties of swift heavy ion beam-irradiated polycarbonate/polystyrene bilayer films

Polycarbonate/polystyrene bilayer films prepared by solvent-casting method were irradiated with 55 MeV carbon ion beam at different fluences ranging from 1×10¹¹ to 1×10¹³ ions cm^?2. The structural, optical, surface morphology and dielectric properties of these films were investigated by X-ray diffraction (XRD), UV–visible spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, optical microscopy and dielectric measurements. The XRD pattern shows that the percentage of crystallinity decreases while inter-chain separations increase with ion fluence. UV–visible spectroscopy shows that the energy band gap decreases and the number of carbon atoms in nanoclusters increase with the increase in ion fluences. The refractive index is also found to decrease with the increase in the ion fluence. Optical microscopy shows that after irradiation polymeric bilayer films color changes with ion fluences. The FTIR spectra evidenced a very small change in cross-linking and chain scissoring at high fluence. Dielectric constant decreases while dielectric loss and AC conductivity increase with ion fluences.     

Opto-chemical response of Makrofol-KG to swift heavy ion irradiation

In the present study, the effects of swift heavy ion beam irradiation on the structural, chemical and optical properties of Makrofol solid-state nuclear track detector (SSNTD) were investigated. Makrofol-KG films of 40 μm thickness were irradiated with oxygen beam (O^8 +) with fluences ranging between 10¹⁰ ion/cm² and 10¹² ion/cm². Structural, chemical and optical properties were investigated using X-ray diffraction, FTIR spectroscopy and UV–visible spectroscopy methods. It is observed that the direct and indirect band gaps of Makrofol-KG decrease after the irradiation. The XRD study shows that the crystalline size in the films decreases at higher fluences. The intensity plots of FTIR measurements indicate the degradation of Makrofol at higher fluences. Roughness of the surface increases at higher fluence.     

Effect of swift heavy ion irradiation on photoluminescence properties of ZnO/PMMA nanocomposite films

We report a study on the SHI induced modifications on structural and optical properties of ZnO/PMMA nanocomposite films. The ZnO nanoparticles were synthesized by the chemical route using 2-mercaptoethanol as a capping agent. The structure of ZnO nanoparticles was confirmed by XRD, SEM and TEM. These ZnO nanoparticles were dispersed in the PMMA matrix to form ZnO/PMMA nanocomposite films by the solution cast method. These ZnO/PMMA nanocomposite films were then irradiated by swift heavy ion irradiation (Ni⁸⁺ ion beam, 100 MeV) at a fluence of 1×10¹¹ ions/cm². The nanocomposite films were then characterized by XRD, UV-vis absorption spectroscopy and photoluminescence spectroscopy. As revealed from the absorption spectra, absorption edge is not changed by the irradiation but the optical absorption is increased. Enhanced green luminescence at about 527 nm and a less intense blue emission peak around 460 nm were observed after irradiation with respect to the pristine ZnO/PMMA nanocomposite film.     

Structural modification of fullerene thin films by highly charged iron ions

In this paper, the results of structural modification of fullerene thin films bombarded by highly charged iron ions (Fe⁶⁺) are presented. The properties of as-deposited and irradiated fullerene thin films have been investigated by Raman spectroscopy, UV/Vis spectrophotometry and atomic force microscopy (AFM). The results of Raman spectroscopy have indicated structural changes of irradiated thin films depending on fluences. It was found that iron doped fullerene films are dominated by sp³ rather than sp² after bombardment which might be due to formation of nanodiamond structures. AFM analysis showed that the ion beam had destroyed the surface ordering. The optical band gap was found to be in the range of 0.6 to 1.4 eV for irradiated films by Fe⁶⁺ ions at the highest fluences. PACS 61.48.+c; 78.30.-j; 79.20.Rf     

Synthesis of amorphous boron carbide by single and multiple charged boron ions bombardment of fullerene thin films

In this paper, results of structural modification of fullerene thin films by single and multiple charged boron ions (B⁺, B³⁺) are presented. The applied ion energies were in the range of 15-45 keV. The characterization of as-deposited and irradiated specimens has been performed by atomic force microscopy, Raman and Fourier transform infrared spectroscopy and UV/vis spectrophotometry. The results of Raman analysis have shown the formation of amorphous layer after irradiation of fullerene thin films. Fourier transform infrared spectroscopy has confirmed the formation of new B-C bonds in irradiated films at higher fluences (2 × 10¹⁶ cm⁻²). The morphology of bombarded films has been changed significantly. The optical band gap was found to be reduced from 1.7 to 1.06 eV for irradiated films by B³⁺ ions and 0.7 eV for irradiated films by B⁺ ions.     

Effects of high-energy ion-beam irradiation on structural and optical properties of (Mg0.95Co0.05)TiO3 thin films

We report the structural and optical properties of high-energy ion-beam irradiated Co-doped magnesium titanate thin films. (Mg_0.95Co_0.05)TiO₃ (MCT) thin films were deposited on quartz substrates using radio frequency magnetron sputtering. Subsequently, the films were annealed for crystallinity and were irradiated with 100?MeV Ag ions by varying the ion fluence. The X-ray diffraction patterns of the films before and after the irradiation were refined using the Rietveld refinement and the variations in the lattice parameters were correlated with the ion fluence. Although, annealing of thin films results in an enhancement in refractive index and optical bandgap, the ion fluence induces significant changes in the refractive index and optical bandgap. Atomic force microscopy is employed to study the surface morphology of the films. The impact of ion fluence on structural and optical properties of MCT thin films has been investigated.     

Structural,optical and electrical properties of 60 MeV C5+ ion-irradiated poly(3-methylthiophene) films

The structural, optical and electrical properties of 60 MeV C⁵⁺ ion-irradiated poly(3-methylthiophene) (P3MT) synthesized by the chemical oxidation polymerization method have been studied. The P3MT powder was dissolved in chloroform (CHCl₃), and thin films of thickness 2 μm were prepared on glass and Si substrates. The polymerization was confirmed by the FTIR spectrum. Then films were irradiated by 60 MeV C⁵⁺ ions at different fluences. FTIR spectra show methyl group evolution after irradiation. The optical band gap decreases slightly after irradiation and the DC conductivity increases by about one order of magnitude after irradiation at the highest fluence. The role of S _e has also been discussed when compared with 60 MeV Si⁵⁺ ion irradiation of P3MT. The morphological changes are observed using SEM.     

Effects of electron irradiation on the properties of GZO films deposited with RF magnetron sputtering

Transparent conductive GZO films were deposited on polycarbonate substrates by electron beam assisted radio frequency (RF) magnetron sputtering and then the influence of electron irradiation on the structural, optical and electrical properties of GZO films was investigated by using X-ray diffractometry, UV-vis spectrophotometry, four point probes, atomic force microscopy and UV photoelectron spectroscopy. Sputtering power was kept constant at 3 W/cm² during deposition, while electron irradiation energy varied from 450 to 900 eV.Electron irradiated GZO films show larger grain sizes than those of films prepared without electron irradiation, and films irradiated at 900 eV show higher optical transmittance in the visible wavelength region and lower sheet resistance (120 Ω/□) than other films. The work-function is also increased with electron irradiation energy. The highest work-function of 4.4 eV was observed in films that were electron irradiated at 900 eV.     

Transparent conductive ZnO:Ga films prepared by DC reactive magnetron sputtering at low temperature

Ga-doped ZnO (ZnO:Ga) transparent conductive films were deposited on glass substrates by DC reactive magnetron sputtering. The structural, electrical, and optical properties of ZnO:Ga films were investigated in a wide temperature range from room temperature up to 400 °C. The crystallinity and surface morphology of the films are strongly dependent on the growth temperatures, which in turn exert an influence on the electrical and optical properties of the ZnO:Ga films. The film deposited at 350 °C exhibited the relatively well crystallinity and the lowest resistivity of 3.4 × 10⁻⁴ Ω cm. More importantly, the low-resistance and high-transmittance ZnO:Ga films were also obtained at a low temperature of 150 °C by changing the sputtering powers, having acceptable properties for application as transparent conductive electrodes in LCDs and solar cells.     

Influence of 120 MeV Si9+ ion irradiation on ZnTe semiconductor thin films

ABSTRACT

ZnTe (Zinc Telluride) is a potential semiconducting material for many optoelectronic devices like solar cells and back contact material for CdTe-based solar cells. In the present study, ZnTe thin films were prepared by thermal evaporation technique and then irradiated with 120?MeV Si⁹⁺ ions at different fluences. These films are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV–Visible spectroscopy techniques. XRD study confirms increased crystallinity and grain growth for post-irradiated ZnTe thin films for fluences, up to 1?×?10¹¹ ions cm^?2. However, the grain size and crystallinity decreased for higher fluence-exposed samples. SEM images confirm the observed structural properties. Modification of the surface morphology of the film due to the ion irradiation with different fluences is studied. Optical band gap of film is decreased from 2.31?eV (pristine) to 2.17?eV after irradiation of Si⁹⁺ ions.     

High-energy heavy-ion induced physical and surface-chemical modifications in polycrystalline cadmium sulfide thin films

The effect of high electronic energy deposition on the structure, surface topography, optical properties, and electronic structure of cadmium sulfide (CdS) thin films have been investigated by irradiating the films with 100 MeV Ag⁺⁷ ions at different ion fluences in the range of 10¹²–10¹³ ions/cm². The CdS films were deposited on glass substrate by thermal evaporation, and the films studied in the present work are polycrystalline with crystallites preferentially oriented along (002)-H direction. It is shown that swift heavy ion (SHI) irradiation leads to grain agglomeration and hence an increase in the grain size at low ion fluences. The observed lattice compaction was related to irradiation induced polygonization. The optical band gap energy decreased after irradiation, possibly due to the combined effect of change in the grain size and in the creation of intermediate energy levels. Enhanced nonradiative recombination via additional deep levels, introduced by SHI irradiation was noticed from photoluminescence (PL) analysis. A shift in the core levels associated with the change in Fermi level position was realized from XPS analysis. The chemistry of CdS film surface was studied which showed profound chemisorption of oxygen on the surface of CdS.     

Structural phase diagram for ZnS nanocrystalline thin films under swift heavy ion irradiation

The synthesis of nanocrystalline ZnS thin films by pulsed laser deposition and their modification by swift heavy ions are presented. The irradiations with 150 MeV Ni ions at fluences of 1×10¹¹, 1×10¹² and 1×10¹³ ions/cm² have been used for these studies. Irradiation results in structural phase transformation and bandgap modification of these films are investigated by using X-ray diffraction and UV-visible absorption measurements, respectively. Since stoichiometry changes induced by irradiation can contribute to the modification of these properties, elastic recoil detection analysis has been performed on pristine and 150 MeV Ni ions irradiated ZnS thin films using a 120 MeV Ag ion beam. The stoichiometry of the films has been found to be similar for pristine and ion irradiated samples. A structural phase diagram based on thermal and pressure spikes has been constructed to explain the structural phase transformation.     

Effect of 100 MeV O7+ ions irradiation on ethanol sensing response of nanostructures of ZnO and SnO2

Tin dioxide nanoparticles and zinc oxide nanorods were synthesized chemically and thick film gas sensors on alumina substrates were fabricated of these materials. Morphology and crystallite size of synthesized powders were investigated by TEM. The fabricated sensors were irradiated with 100 MeV O⁷⁺ ions at fluences of 1×10¹¹, 1×10¹² and 1×10¹³ ions/cm². The X-ray diffraction analysis of the samples before and after ion bombardment was performed for structural characterization. The sensing response to ethanol before and after irradiation was carried out for each fabricated sensor. Investigation revealed that irradiated SnO₂ based sensor’s response and response time increased significantly. Results show that ZnO based sensor exhibit strong resistance to damage caused by ion irradiation which might be due to defects annihilation.     

Defects mediated diffusion in Pt/Co/Pt multilayers induced by dense electronic excitations

Present study compares the effects of 200 MeV Ag¹⁵⁺ and 100 MeV O⁷⁺ ion irradiations on the structural, interfacial mixing and magnetic properties of annealed Pt/Co/Pt layers fabricated by DC magnetron sputtering. X-ray diffraction analysis shows that ion irradiations coupled with post annealing results in the formation of the face centred tetragonal L1₀ CoPt phase. Irradiation using 200 MeV Ag¹⁵⁺ ions having higher ionizing energy transfer to the film was found to be more efficient in causing structural phase transition as compared with that using 100 MeV energy O⁷⁺ ions having lower ionizing energy transfer at similar fluence. Rutherford back scattering analysis reveals the role of defect mediated inter-atomic diffusion in tailoring the alloy composition of the film irradiated by different energetic ions. A broad magnetic switching field distribution for O⁷⁺ ion irradiated films compared to Ag¹⁵⁺ ion irradiation was evident from the magnetic measurements. The contribution of alloy composition to switching field distribution has been discussed in details. Above results showed that the electronic energy loss and fluence dependent defects, generated by irradiation, played an important role in tuning the structural, atomic diffusion and magnetic reversal properties of Pt/Co/Pt.     

Structural phase transformation in ZnS nanocrystalline thin films by swift heavy ion irradiation

Zinc sulfide (ZnS) thin films in zinc-blende (ZB) and wurtzite (W) phases have been fabricated by pulsed laser deposition. 150 MeV Ni ion beam irradiation has been carried out at different fluences ranging from 10¹¹ to 10¹³ ions/cm² at room temperature for ion induced modifications. Structural phase transformation in ZnS from W to ZB phase is observed after high energy ion irradiation which leads to the decrease in bandgap. Generation of high pressure and temperature by thermal spike during MeV ion irradiation along the ion trajectory in the films is responsible for the structural phase transformation.     

Xenon-ion Induced Magnetic and Structural Modifications of Ferromagnetic Alloys

Thin polycrystalline films of permalloy (Ni₇₉Fe₂₁) and permendur (Co₅₀Fe₅₀) have been irradiated with Xe-ions to fluences of 10¹⁴–10¹⁶ ions/cm². Ion-induced structural and magnetic modifications have been measured by grazing angle X-ray diffraction, Rutherford backscattering and magneto-optical Kerr effect. In the case of permendur, the Xe-ion implantation first reduced the coercivity, because of stress relaxation, while higher ion fluences increased the coercivity due to pinning centers generated in the film. The ion irradiation aligned the in-plane easy axis of the magnetization along the direction of the external magnetic field during implantation. Phase shifts obtained from magnetic force microscopy confirmed these modifications. The effects of Xe-ion irradiation in permalloy films are much weaker and underline the importance of magnetostriction in the variation of the coercivity and anisotropy.     

Effect of 160 MeV Ni ion irradiation on PbS quantum dots

PbS quantum dots of average size 10 nm are encapsulated in a matrix (polyvinyl alcohol (PVA)) following chemical route. They are irradiated with 160 MeV Ni¹²⁺ ion beam with fluences 10¹²-10¹³ ions/cm². Red shift in the absorption response in the optical absorption spectra reveal size enhancement of the quantum dots after irradiation and was confirmed by transmission electron microscopy (TEM). Photoluminescence (PL) study was carried out with excitation wavelength 325 nm on both unirradiated and irradiated samples at different fluences and fluence-dependent surface states and excitonic emission is observed in the PL study. The Huang-Rhys coupling constant decreases significantly after swift heavy ion (SHI) irradiation and shows a decreasing trend with increase in ion fluence.     

125 MeV Si ion irradiation of calcium phosphate thin film coated by rf-magnetron sputtering technique

Titanium substrate was coated with hydroxyapatite by radiofrequency magnetron sputtering (rf-magnetron sputtering) technique and subjected to swift heavy ion (SHI) irradiation of 125 MeV with Si⁹⁺ at fluences of 1 × 10¹⁰, 1 × 10¹¹ and 1 × 10¹² ions/cm². The glancing incidence X-ray diffraction (GIXRD) analysis confirmed the HAp phase of the irradiated film. There was a considerable decrease in crystallinity and particle size after irradiation. In addition, DRS-UV reflectance spectra revealed a decrease in optical band gap (E_g) from 5.2 to 4.6 eV. Wettability of biocompatible materials plays an important role in biological cells proliferation for tissue engineering, drug delivery, gene transfer and bone growth. HAp thin films irradiated with 1 × 10¹¹ ions/cm² fluence showed significant increase in wettability. While the SHI irradiated samples exhibited enhanced bioactivity, there was no significant variation in cell viability. Surface roughness, pores and average particle size were analyzed by atomic force microscopy (AFM).     

Structural and optical properties of Au-implanted ZnO films

The structural and luminescence related optical behaviours of Au ion implanted ZnO films grown by magnetic sputtering and their post implantation annealing behaviours in the temperature range of 100-700 °C have been investigated. Optical absorption and transmittance spectra of the films indicate that band edge of Au-implanted ZnO has shifted to high energy range and optical band gap has increased, because the sharp difference of thermal expansion induces the lattice mismatch between ZnO and SiO₂. PL spectra reveal that UV and visible luminescence bands of ZnO films can be improved after thermal annealing due to recovery of defects and Au ions incorporation. Importantly, green luminescence band of 530 nm has been only observed in the Au-implanted and subsequently annealed ZnO films and it enhances with the increasing annealing temperature, which can be related to Au atoms or clusters in ZnO films. Furthermore, X-ray photoelectron spectroscopy measurements reveal that the Au⁰ is dominant state in Au implanted and annealed ZnO films. Possible mechanisms, such as optical transitions of Au atoms or clusters and deep level luminescence of ZnO, have been proposed for green emission.     

Effect of 100 MeV O7+ ion beam irradiation on structural,optical and electronic properties of SnO2 thin films

In this paper, we present the impact of swift heavy ion beam irradiation on the structural, optical and electronic properties of SnO₂ thin films. Thin films were deposited using the pulsed laser deposition technique on Al₂O₃ substrates. Atomic force microscopy, X-ray diffraction, UV–visible absorption and temperature-dependent resistivity measurements were performed to explore the morphological, structural, optical and electronic properties of the as-deposited and irradiated samples. The peak intensity of the (200) peak was found to decrease monotonously with increasing irradiation fluence. The band gap energy of the 1×10¹¹ ion/cm² irradiated sample was found to increase. The electrical resistivity of the samples showed a continuous increase with the irradiation fluence.