Terahertz generation and amplification in graphene nanoribbons in multi-frequency electric fields

We study theoretically a multi-frequency response of electrons in confined graphene subject to DC–AC driven fields. We explore the possibility for using graphene nanoribbons (GNRs) to generate and amplify terahertz (THz) radiations in electric field domainless regime. We discover two main important schemes of generation; when the frequencies are commensurate, THz generation is due to wave mixing and when they are non-commensurate, a single strong field suppresses space charge instability and any weak signals can get amplified.     

First principles calculations of armchair graphene nanoribbons interacting with Cu atoms

We have investigated the electronic properties of bare, H-terminated, Cu-terminated and Cu-doped armchair graphene nanoribbons (AGNRs) using ab-initio approach. We found that H-termination enhances the stability and band gap whereas H extraction introduces dangling bands and lowers the band gap making bare ribbons indirect band gap semiconductors. The calculations revealed that strong hybridization between Cu atoms and AGNRs, lessen the band gap for Cu-terminated ribbons and gives rise to metallicity in Cu-doped AGNRs irrespective of their widths. Formation energy of considered ribbons yield that H-terminated AGNRs with lowest formation energy are most energetically favored, next are one edge Cu-terminated ribbons followed by bare ones whereas both edges Cu-doped ribbons are least energetically plausible. We predict that presence of Cu atoms in GNRs, significantly alter the band gap and can be used in band gap engineering of nanoribbons.     

介质填充浅槽周期结构表面上的太赫兹表面等离子体激元

通过在金属表面刻成浅的垂直凹槽,并在槽内填充不同的介质,对金属表面浅槽周期结构上传播的表面等离子体激元的色散特性与填充介质的关系进行了研究.研究表明通过在周期凹槽内填充介质可以有效降低人工表面等离子体激元的渐近频率,并增强金属表面对电磁场的约束.分析了太赫兹波段金属的吸收损耗对人工表面等离子体激元特性的影响,结果显示基于填充介质的浅槽周期表面结构可以获得长距离传输以及场的亚波长约束.通过对波传输的数值仿真,验证了该表面结构在太赫兹波段良好的导波能力.这种表面结构对太赫兹波段新型集成导波器件的设计具有参考价值.     

介质填充浅槽周期结构表面上的太赫兹表面等离子体激元

通过在金属表面刻成浅的垂直凹槽,并在槽内填充不同的介质,对金属表面浅槽周期结构上传播的表面等离子体激元的色散特性与填充介质的关系进行了研究.研究表明通过在周期凹槽内填充介质可以有效降低人工表面等离子体激元的渐近频率,并增强金属表面对电磁场的约束.分析了太赫兹波段金属的吸收损耗对人工表面等离子体激元特性的影响,结果显示基于填充介质的浅槽周期表面结构可以获得长距离传输以及场的亚波长约束.通过对波传输的数值仿真,验证了该表面结构在太赫兹波段良好的导波能力.这种表面结构对太赫兹波段新型集成导波器件的设计具有参考价值.     

基于石墨烯编码超构材料的太赫兹波束多功能动态调控

提出了一种基于石墨烯带的太赫兹波段的1 bit编码超构材料,可以实现太赫兹波束的数目、频率、幅度等参数多功能动态调控.该结构由金属薄膜、聚酰亚胺、硅、二氧化硅、石墨烯带组成.通过对石墨烯带施加两种不同的电压,可以实现一定频率范围内相位差接近180?的"0"和"1"数字编码单元,进而构成1 bit动态可控的编码超构材料.全波仿真结果表明,不同序列的编码超构材料能够实现波束数目从单波束、双波束、多波束到宽波束的调控.相同序列的编码超构材料,通过施加石墨烯带的不同电压能够实现宽频段波束频率的偏移.对于000000或者111111周期序列的编码超构材料,通过施加石墨烯带的不同电压还能够实现波束幅度的调控.因此这种基于石墨烯带的编码超构材料为灵活调控太赫兹波提供了一种新的途径,将在雷达隐身、成像、宽带通信等方面具有重要的意义.     

Design of Tunable Devices at Terahertz Frequencies Based on Quasi-Photonic Crystals Incorporated with Graphene

In this study, we present a new theoretical model including Thue-Morse and double-period sequences as quasi-photonic crystals are incorporation with graphene and investigate the transmission properties of the THz waves in both structures using a straightforward computational method. We also consider properties of nonlinear conductivity in addition to surface linear conductivity for graphene. We observe the sharp peaks and proper forbidden bands are created in the range of $0.3$ THz to $30$ THz. In addition, we find that by considering the nonlinear term of graphene and engineering the structural parameters such as the chemical potential of graphene, number of layers and the incidence wave angle, transmission levels of peaks enhance scientifically and quality factor improve considerably. These results show that it would be possible to design of high-Q tunable filters with multi-stop bands in the THz regime which can reduce the noise associated with THz frequency peaks and increase the number of sharp frequency peaks.     

Electrically tunable polarizer based on anisotropic absorption of graphene ribbons

We theoretically demonstrate that an electrically tunable polarizer can be obtained using a periodic array of graphene ribbons supported on a dielectric film on top of a thick piece of metal. The polarizing mechanism originates from anisotropic absorption of the graphene ribbons. The results of fullwave numerical simulations reveal that absorption of 0.0075 for one polarization and 0.9986 for another polarization can be obtained at normal incidence in the THz range. For circular incidence polarization, the corresponding polarizing extinction ratio increases to 65 dB.     

Electric field effect in ultrathin zigzag graphene nanoribbons

The electric field effect in ultrathin zigzag graphene nanoribbons containing only three or four zigzag carbon chains is studied by first-principles calculations, and the change of conducting mechanism is observed with increasing in-plane electric field perpendicular to the ribbon. Wider zigzag graphene nanoribbons have been predicted to be spin-splitted for both valence band maximum(VBM) and conduction band minimum(CBM) with an applied electric field and become half-metal due to the vanishing band gap of one spin with increasing applied field. The change of VBM for the ultrathin zigzag graphene nanoribbons is similar to that for the wider ones when an electric field is applied. However, in the ultrathin zigzag graphene nanoribbons, there are two kinds of CBMs, one is spin-degenerate and the other is spin-splitted, and both are tunable by the electric field. Moreover, the two CBMs are spatially separated in momentum space. The conducting mechanism changes from spin-degenerate CBM to spin-splitted CBM with increasing applied electric field. Our results are confirmed by density functional calculations with both LDA and GGA functionals, in which the LDA always underestimates the band gap while the GGA normally produces a bigger band gap than the LDA.     

单空位缺陷对石墨纳米带电子结构和输运性质的影响

基于第一性原理电子结构和输运性质计算,研究了单空位缺陷对单层石墨纳米带(包括zigzag型和armchair型带)电子性质的影响.研究发现,单空位缺陷使石墨纳米带在费米面上出现一平直的缺陷态能带;单空位缺陷的引入使zigzag型半导体性的石墨纳米带变为金属性,这在能带工程中有重要的应用价值;奇数宽度的armchair型石墨纳米带表现出金属特性,有着很好的导电性能,同时,偶数宽度的armchair型石墨带虽有金属性的能带结构,但却有类似半导体的伏安特性;单空位缺陷使得奇数宽度的armchair石墨纳米带导电 关键词： 石墨纳米带 单空位缺陷 电子结构 输运性质     

Coupled THz Waveguide Utilizing Surface Plasmon Polaritons on Thin Dielectric Slab Sandwiched between Two Corrugated Metallic Claddings

We present a comprehensive experimental study of terahertz （THz） wave propagation utilizing surface plasmon polaritons （SPPs） on the interfaces of a thin dielectric core layer sandwiched between two corrugated metallic claddings. THz wave impinges on the structured surfaces at normal incidence. Long-lasting oscillation propagation features are observed in the temporal waveform after traveling through the periodic arrays. The enhanced THz transmission can be achieved due to the coupling between incident waves to SPPs at the bottom and top interfaces. The finite element method is used to simulate the field distribution and the transmission mode in the waveguide. The hybrid waveguide with low absorption has great potential applications in THz integrated devices.     

金属导线偶合THz表面等离子体波

利用THz时域光谱技术,研究了具有不同排列参数的金属导线阵列的透射特性,分析了金属导线半径,排列间隔以及入射电场的偏振方向对表面等离子体波产生和传播的影响.在具有等间隔缝隙的金属导线中,当电场偏振方向垂直金属导线时,透射信号受等离子模式和谐振腔模式的共振效应的影响;而当电场偏振平行金属导线时,只存在谐振腔模式的共振. 关键词： THz 时域光谱 铜导线 表面等离子体     

Cavity plasmon polaritons in monolayer graphene

Plasmon polaritons in a new system, a monolayer doped graphene embedded in optical microcavity, are studied here. The dispersion law for lower and upper cavity plasmon polaritons is obtained. Peculiarities of Rabi splitting for the system are analyzed; particularly, role of Dirac-like spinor (envelope) wave functions in graphene and corresponding angle factors are considered. Typical Rabi frequencies for maximal (acceptable for Dirac-like electron spectra) Fermi energy and frequencies of polaritons near polariton gap are estimated. The plasmon polaritons in considered system can be used for high-speed information transfer in the THz region.     

次近邻跃迁对石墨烯纳米带输运性质的影响

根据紧束缚模型,利用格林函数的方法,将次近邻跃迁考虑在内,研究了扶手椅型石墨烯纳米带的输运性质.通过数值计算,给出了不同尺寸和不同次近邻跃迁能下系统的能量-电导和电流-电压特征曲线.结果表明,次近邻跃迁对扶手椅型石墨烯纳米带的输运性质有显著的影响.它破坏了电导共振峰关于能量的对称分布,增强了系统的导电性,减小了电子导电偏压阈值,加速了系统输运性能由半导体向导体转变. 次近邻跃迁能和石墨烯纳米带的尺寸越大,这种影响越明显     

Optical response of tunable terahertz plasmon in a grating-gated graphene transistor

Tunable terahertz plasmon in a graphene-based device with a grating serving as a top gate is studied. Transmission spectra exhibit a distinct peak in the terahertz region when the terahertz electric field is perpendicular to the grating fingers.Our results show that the extinction in the transmission of single-layer graphene shields beyond 80%. Electronic results further show that the graphene plasmon can be weakly adjusted by tuning the gate voltage. Theoretical calculation also implies that the plasmon frequency of graphene can fall into the terahertz region of 1–2 THz by improving the sustaining ability and capacitance of the top gate.     

Energy gaps in graphene nanoribbons

Based on a first-principles approach, we present scaling rules for the band gaps of graphene nanoribbons (GNRs) as a function of their widths. The GNRs considered have either armchair or zigzag shaped edges on both sides with hydrogen passivation. Both varieties of ribbons are shown to have band gaps. This differs from the results of simple tight-binding calculations or solutions of the Dirac's equation based on them. Our ab initio calculations show that the origin of energy gaps for GNRs with armchair shaped edges arises from both quantum confinement and the crucial effect of the edges. For GNRs with zigzag shaped edges, gaps appear because of a staggered sublattice potential on the hexagonal lattice due to edge magnetization. The rich gap structure for ribbons with armchair shaped edges is further obtained analytically including edge effects. These results reproduce our ab initio calculation results very well.     

Dynamically Tunable and High-Contrast Graphene-Based Terahertz Electro-Optic Modulator

We propose and discuss terahertz(THz) electro-optic modulator induced by periodically patterned graphene microcavity. Due to the joint effect of graphene plasmon resonances and Fabry-Perot(F-P) oscillations, plasmon-induced transparency(PIT) effect is achieved and the operation frequency can be dynamically tuned by graphene Fermi energies and structural parameters. The results reveal that modulation depth(MD) larger than 80% is obtained across a wide frequency range from 4.2 THz to 9.4 THz, and the largest MD and Q factor reaches 95% and 15.8, respectively. In addition, operation frequency range and MD can also be tuned by optimizing the structure parameters. This investigation promises the development of high-performance widely tunable THz modulator in chip integrated photonic circuits.     

Quasiparticle energies and band gaps in graphene nanoribbons

We present calculations of the quasiparticle energies and band gaps of graphene nanoribbons (GNRs) carried out using a first-principles many-electron Green's function approach within the GW approximation. Because of the quasi-one-dimensional nature of a GNR, electron-electron interaction effects due to the enhanced screened Coulomb interaction and confinement geometry greatly influence the quasiparticle band gap. Compared with previous tight-binding and density functional theory studies, our calculated quasiparticle band gaps show significant self-energy corrections for both armchair and zigzag GNRs, in the range of 0.5-3.0 eV for ribbons of width 2.4-0.4 nm. The quasiparticle band gaps found here suggest that use of GNRs for electronic device components in ambient conditions may be viable.     

Anomalous transmission of terahertz wave through one-dimensional lamellar metallic grating

The anomalous transmission through one-dimensional lamellar metallic gratings was investigated in terahertz (THz) regime. The extraordinary optical transmission (EOT) is identified to originate from two possible ways: coupling of incident light with waveguide resonances and coupling of surface plasmon polaritons (SPPs) at the upper and lower interfaces of metal grating. The dual effects of SPPs have been clarified in this study: (i) the excitation of SPP modes at each individual interface results in the weakness of the THz wave transmission; and (ii) the coupling of SPP modes at two interfaces of metal grating is attributed to enhancement of THz wave transmission. The enhanced transmission is dominated by the coupling of incident light with transverse waveguide resonances. Numerical simulation based on finite-difference time-domain (FDTD) agrees well with experimental results.     

Electronic and transport properties of boron-doped graphene nanoribbons

We report a spin polarized density functional theory study of the electronic and transport properties of graphene nanoribbons doped with boron atoms. We considered hydrogen terminated graphene (nano)ribbons with width up to 3.2 nm. The substitutional boron atoms at the nanoribbon edges (sites of lower energy) suppress the metallic bands near the Fermi level, giving rise to a semiconducting system. These substitutional boron atoms act as scattering centers for the electronic transport along the nanoribbons. We find that the electronic scattering process is spin-anisotropic; namely, the spin-down (up) transmittance channels are weakly (strongly) reduced by the presence of boron atoms. Such anisotropic character can be controlled by the width of the nanoribbon; thus, the spin-up and spin-down transmittance can be tuned along the boron-doped nanoribbons.     

Negative differential resistance behaviour in N-doped crossed graphene nanoribbons

By using first-principles calculations and nonequilibrium Green’s function technique, we study elastic transport properties of crossed graphene nanoribbons. The results show that the electronic transport properties of molecular junctions can be modulated by doped atoms. Negative differential resistance (NDR) behaviour can be observed in a certain bias region, when crossed graphene nanoribbons are doped with nitrogen atoms at the shoulder, but it cannot be observed for pristine crossed graphene nanoribbons at low biases. A mechanism for the negative differential resistance behaviour is suggested.