Sulfide oxygenation by tert-butyl hydroperoxide with mononuclear (Me3TACN)Mn catalysts

Mononuclear (Me₃TACN)MnX₃ compounds, where X is Cl⁻, Br⁻, or N₃⁻, and Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane, have been tested for catalyzing both sulfide oxygenation and styrene epoxidation by tert-butyl hydroperoxide (TBHP) and display turnover frequencies (TOF) up to 200 h⁻¹ at room temperature. Sulfoxides or sulfones may be produced selectively by varying reaction conditions. Product distribution from the oxygenation reactions of ethyl phenyl sulfide, 2-chloroethyl phenyl sulfide, and styrene is consistent with a mechanism involving an early single-electron transfer (SET) step.     

Study of diffusion-controlled and activation-diffusion-controlled electron-transfer processes from quenching measurements

The diffusion-controlled rate constants, k_d, of various quenching reactions, [Ru(L)₃]^2+∗ (L = bpy, phen and 4,7-(CH₃)₂phen) + [Fe(CN)₆]³⁻, were measured through fluorescence measurements. From them, the effective values of viscosity coefficients for several methanol + water mixtures were calculated. These coefficients were checked through calculations of the rate constants of the reaction [IrCl₆]²⁻ + [Ru(bpy)₃]^2+∗, which were also obtained by fluorescence quenching measurements. The agreement between the two sets of data (experimental and predicted) is excellent. Besides, the trends of association, k_d, and dissociation, k_−d, rate constants for 2+/3−, 2+/2− and 2+/2+ reactions in methanol-water mixtures are discussed. The use of effective diffusion coefficients for estimating k_d and k_−d allowed us to obtain the intrinsic electron transfer rate constant, k_et, for the activation-diffusion-controlled process between [Ru(bpy)₃]^2+∗ and [Co(NH₃)₅Cl]²⁺ complexes from the observed (quenching) rate constant. The influence of methanol-water mixtures on k_et was rationalized by using the Marcus electron-transfer treatment.     

Kinetic study of the oxidative addition reaction between methyl iodide and [Rh(FcCOCHCOCF3)(CO)(PPh3)]: Structure of [Rh(FcCOCHCOCF3)(CO)(PPh3)(CH3)(I)]

The kinetics of oxidative addition of CH₃I to [Rh(FcCOCHCOCF₃)(CO)(PPh₃)], where Fc = ferrocenyl and (FcCOCHCOCF₃)⁻ = fctfa = ferrocenoylacetonato, have been studied utilizing UV/Vis, IR, ¹H and ³¹P NMR techniques. Three definite sets of reactions involving isomers of at least two distinctly different classes of Rh^III-alkyl and two different classes of Rh^III-acyl species were observed. Rate constants for this reaction in CHCl₃ at 25 °C, applicable to the reaction sequence below, were determined as k₁ = 0.00611(1) dm³ mol⁻¹ s⁻¹, k₋₁ = 0.0005(1) s⁻¹, k₃ = 0.00017(2) s⁻¹ and k₄ = 0.0000044(1) s⁻¹ while k₋₃ ? k₃ and k₋₄ ? k₄ but both ≠0. The indeterminable equilibrium K₂ was fast enough to be maintained during Rh^I depletion in the first set of reactions and during the Rh^IIIalkyl2 formation in the second set of reactions. From a ¹H and ³¹P NMR study in CDCl₃, K_c1 was found to be 0.68, K_c2 = 2.57, K_c3 = 1.00, K_c4 = 4.56 and K_c5 = 1.65.     

Efficient nucleophilic substitution reactions of highly functionalized allyl halides in ionic liquid media

Nucleophilic substitution reactions of highly functionalized allyl halides with three anions, N₃⁻, AcO⁻, and PhSO₂⁻, in ionic liquid media were conducted. The ionic liquid, [Bmim][BF₄], was found to be superior to classical organic solvents to give higher yields and faster reaction rates. The resulting products belong to multifunctionalized trisubstituted α,β-unsaturated ketones, which are useful building blocks for organic synthesis.     

Tutorial review: Bohr circular orbit diagrams for some fluorine-containing molecules

Examples are provided of Bohr circular orbit diagrams to represent the electronic structures of some fluorine-containing molecules. The orbit diagrams are constructed from a 2n × n factorisation of the atomic shell-structure formula 2n², with n = 1, 2, 3, … Particular attention is given to orbit diagrams and the associated valence bond structures for the hypercoordinate molecules and ions PF₅ and NF₅, F₃⁻ and XeF₂, IF₅ and XeF₅⁺, XeF₅⁻, IF₈⁻, XeF₈²⁻, ReF₈⁻ and TaF₈³⁻, ZrF₈⁴⁻, ZrF₇³⁻, Re₂F₈²⁻, and high-spin CoF₆³⁻.Aspects of the electronic structures of D_3h-symmetry PF₅ and NF₅ are contrasted via the use of orbital valence bond considerations, and the results of STO-3G valence bond calculations are reported for these species.     

Kinetics and mechanism of hydroboration reactions of HBBr2 · SMe2 and HBCl2 · SMe2 - Application of B NMR spectroscopy

The kinetics and mechanism of the hydroboration reactions of 1-octene with HBBr₂ · SMe₂ and HBCl₂ · SMe₂, in CH₂Cl₂ as a solvent, were studied. Rates of hydroboration were monitored using ¹¹B NMR spectroscopy. The reactions exhibited simple second-order kinetics of the form . The HBCl₂ · SMe₂ was found to be 20 times more reactive than the HBBr₂ · SMe₂. The overall activation parameters (ΔH^≠, ΔS^≠) for the reaction of HBBr₂ · SMe₂ with 1-octene were found to be 82 ± 1 kJ mol⁻¹, −18 ± 4 J K⁻¹ mol⁻¹ and with 1-hexyne were 78 ± 4 kJ mol⁻¹ −34 ± 12 J K⁻¹ mol⁻¹. For the reaction of HBCl₂ · SMe₂ with 1-octene, ΔH^≠ and ΔS^≠ were 104 ± 5 kJ mol⁻¹ and 43 ± 16 J K⁻¹ mol⁻¹, respectively. The activation parameters (ΔH^≠, ΔS^≠) for the dissociation of Me₂S from HBBr₂ · SMe₂ were found to be 104 ± 2 kJ mol⁻¹, +33 ± 8 J K⁻¹ mol⁻¹, respectively. Based on the activation parameters, it was concluded that the detaching of Me₂S from the boron centre follows a dissociative mechanism, while the hydroboration process follows an associative pathway. It was also concluded that the dissociation of Me₂S from the boron centre is the rate determining step.     

A novel dichromate-sensitive fluorescent nano-chemosensor using new functionalized SBA-15

A novel fluorescence nano-chemosensor for Cr₂O₇²⁻ anion has been developed by assembly of fluorescent aluminum complex of 8-hydroxyquinoline (AlQ_x) within the channels of modified SBA-15. SBA-SPS-AlQ_x shows a fluorescence emission at 486 nm. The observed remarkable fluorescence of SBA-SPS-AlQ_x quenches in presence of Cr₂O₇²⁻ anion. The results showed that this fluorescent nano-material can be a useful chemo-sensor for determination of dichromate anions in aqueous solutions. The linear detecting range of fluorescent nano-chemosensor for Cr₂O₇²⁻ anion was 0.16–2.9 μmol L⁻¹. The lowest limit of detection (LDL) was also found to be 0.2 ng mL⁻¹ in aqueous solutions. SBA-SPS-AlQ_x showed selectively and sensitively fluorescent quenching response toward Cr₂O₇²⁻ ion in comparison with I₃⁻, NO₃⁻, CN⁻, CO₃²⁻, Br⁻, Cl⁻, F⁻, H₂PO₄⁻ and SO₄²⁻ ions, which was because of the higher stability of its inorganic complex with dichromate ion.     

Electrochemical behavior of hexafluoroniobate, heptafluorotungstate, and oxotetrafluorovanadate anions in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide room temperature ionic liquid

Electrochemical behavior of hexafluoroniobate (Nb(V)F₆⁻), heptafluorotungstate (W(VI)F₇⁻), and oxotetrafluorovanadate (V(V)OF₄⁻) anions has been investigated in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (BMPyrTFSA) ionic liquid at 298 K by means of cyclic voltammetry and chronoamperometry. Cyclic voltammograms at a Pt electrode showed that Nb(V)F₆⁻ anion is reduced to Nb(IV)F₆²⁻ by a one-electron reversible reaction. Electrochemical reductions of W(VI)F₇⁻ and V(V)OF₄⁻ anions at a Pt electrode are quasi-reversible and irreversible reactions, respectively, according to cyclic voltammetry. The diffusion coefficients of Nb(V)F₆⁻, W(VI)F₇⁻ and V(V)OF₄⁻ determined by chronoamperometry are 1.34 × 10⁻⁷, 7.45 × 10⁻⁸ and 2.49 × 10⁻⁷ cm² s⁻¹, respectively. The Stokes radii of Nb(V)F₆⁻, W(VI)F₇⁻, and V(V)OF₄⁻ in BMPyrTFSA have been calculated to be 0.23, 0.38, and 0.12 nm, from the diffusion coefficients and viscosities obtained.     

Synthesis and Crystal Structure of M11X10 Compounds, M=Sr, Ba and X=Bi, Sb. Electronic Requirements and Chemical Bonding

The intermetallic compounds Sr₁₁Bi₁₀, Ba₁₁Bi₁₀, and (Sr₅Ba₆)Sb₁₀ have been obtained from melts of mixtures of the elements. They crystallize in the tetragonal system, space group I4/mmm, Ho₁₁Ge₁₀ structure type, tI84 Pearson symbol, Z=4, with cell parameters a=12.765(3), 13.230(3), 12.748(2) Å and c=18.407(3), 19.365(3), 18.761(2) Å, respectively. The structures were solved from single-crystal X-ray data and refined by full-matrix least-squares to R1=6.71, 5.44, and 5.73%. The structure of M₁₁X₁₀ contains three discrete anionic moieties: square rings X⁴⁻₄, dumbbells X⁴⁻₂, and isolated X³⁻. Using formal charges the unit cell of M₁₁X₁₀ may be described as containing 44 M²⁺, 2X⁴⁻₄, 8X⁴⁻₂, and 16X³⁻ ions. This structure is discussed in comparison with other Bi or Sb pnictide compounds. Bonding is analyzed therein using molecular orbital (EHMO) calculations for the anions (dumbbell and square units) and also the periodic tight-binding method. Lone pair repulsions inside and between the anionic units are evidenced; they are compensated by strong bonding cation-to-anion interactions. Interatomic distances along the series appear to be more dependent on packing than on electronic effects.     

Nucleophilic substitution of (sulfonyloxymethyl)aziridines: an asymmetric synthesis of both isomers of mexiletine

The nucleophilic substitution reactions of 1-[1′(R)-α-methylbenzyl]-(2R)- and (2S)-(sulfonyloxymethyl)aziridines were carried out with various nucleophiles including N₃⁻, MeO⁻, CN⁻, SCN⁻, and diarylcuprates. The reaction pathway is influenced by the stereochemistry of the substrates, nucleophiles, and also the structure of the leaving groups. When the reaction site is less sterically hindered for the reactive nucleophiles to approach to the substrate 1-[1′(R)-α-methylbenzyl]-(2S)-(p-toluenesulfonyloxymethyl)aziridines, product is obtained as a single isomer while all the other starting materials afford a mixture of two isomers from two different reaction pathways. Application of this method enabled us to prepare both isomers of orally effective antiarrhythmic agent mexiletine.     

The enthalpies of formation of XeF6(c), XeF4(c), XeF2(c), and PF3(g)

The energies of reaction of XeF₆(c), XeF₄(c), and XeF₂(c) with PF₃(g) were measured in a bomb calorimeter. These results were combined with the enthalpy of fluorination of PF₃(g), which was redetermined to be −(151.98 ± 0.07) kcal_th mol⁻¹, to derive (at 298.15 K) ΔH_f^o(XeF₆, c, I) = −(80.82 ± 0.53) kcal_th mol⁻¹, ΔH_f^o(XeF₄, c) = −(63.84 ± 0.21) kcal_th mol⁻¹, and ΔH_f^o(XeF₂, c) = −(38.90 ± 0.21) kcal_th mol⁻¹. The enthalpies of formation of the solid xenon fluorides were combined with reported enthalpies of sublimation to derive (at 298.15 K) ΔH_f^o(XeF₆, g) = −(66.69 ± 0.61) kcal_th mol⁻¹, ΔH_f^o(XeF₄, g) = −(49.28 ± 0.22) kcal_th mol⁻¹, and ΔH_f^o(XeF₂, g) = −(25.58 ± 0.21) kcal_th mol⁻¹. The average bond dissociation enthalpies,〈D^o〉(XeF, 298.15 K), are (29.94 ± 0.16), (31.15 ± 0.13), and (31.62 ± 0.16) kcal_th mol⁻¹ in XeF₆(g), XeF₄(g), and XeF₂(g), respectively. The enthalpy of formation of PF₃(g) was determined to be −(228.8 ± 0.3) kcal_th mol⁻¹.     

Change in mechanistic pathway of hydroboration: A detailed kinetic study of H2BBr·SMe2 and HBBr2·SMe2

Hydroboration reactions of 1-octene and 1-hexyne with H₂BBr·SMe₂ in CH₂Cl₂ were studied as a function of concentration and temperature, using ¹¹B NMR spectroscopy. The reactions exhibited saturation kinetics. The rate of dissociation of dimethyl sulfide from boron at 25 °C was found to be (7.36 ± 0.59 and 7.32 ± 0.90) × 10⁻³ s⁻¹ for 1-octene and 1-hexyne, respectively. The second order rate constants, k₂, for hydroboration worked out to be 7.00 ± 0.81 M s⁻¹ and 7.03 ± 0.70 M s⁻¹, while the overall composite second order rate constants, k K, were (3.30 ± 0.43 and 3.10 ± 0.37) × 10⁻² M s⁻¹, respectively at 25 °C. The entropy and enthalpy values were found to be large and positive for k₁, whilst for k₂ these were large and negative, with small values for enthalpies. This is indicative of a limiting dissociative (D) for the dissociation of Me₂S and associative mechanism (A) for the hydroboration process. The overall activation parameters, ΔH^≠ and ΔS^≠, were found to be 98 ± 2 kJ mol⁻¹ and +56 ± 7 J K⁻¹ mol⁻¹ for 1-octene whilst, in the case of 1-hexyne these were found out to be 117 ± 7 kJ mol⁻¹ and +119 ± 24 J K⁻¹ mol⁻¹, respectively. When comparing the kinetic data between H₂BBr·SMe₂ and HBBr₂·SMe₂, the results showed that the rate of dissociation of Me₂S from H₂BBr·SMe₂ is on average 34 times faster than it is in the case of HBBr₂·SMe₂. Similarly, the rate of hydroboration with H₂BBr·SMe₂ was found to be on average 11 times faster than it is with HBBr₂·SMe₂. It is also clear that by replacing a hydrogen substituent with a bromine atom in the case of H₂BBr·SMe₂ the mechanism for the overall process changes from limiting dissociative (D) to interchange associative (I_a).     

Synthesis, properties, and oxidizing function of 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates

Uracil-annulated heteroazulenes, 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates 7a,b·BF₄⁻, which are the isoelectronic compounds of 5-dezazaflavin, were synthesized. X-Ray crystal analysis and MO calculations were carried out to clarify the structural characteristics of 7a,b·BF₄⁻. The stability of cations 7a,b is expressed by the pK_R+ values which were determined spectrophotometrically to be 10.9 and 11.2, respectively. The electrochemical reduction of 7a,b exhibited high reduction potentials at −0.84 and −0.87 (V vs Ag/AgNO₃) upon cyclic voltammetry (CV). A good linear correlation between the pK_R+ values and reduction potentials (E1_red) of 7a,b·BF₄⁻ and reference compounds 4·BF₄⁻ and 5·BF₄⁻ was obtained. In a search of the reactivity, reactions of 7a,b·BF₄⁻ with some nucleophiles, hydride and diethylamine, were carried out to clarify that the introduction of nucleophiles to give regio-isomers is dependent on the nucleophile. The photo-induced oxidation reactions of 7a,b·BF₄⁻ toward some alcohols under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compounds 7a,b·BF₄⁻], suggesting the oxidizing function of 7a,b·BF₄⁻ toward alcohols in the autorecycling process.     

Reverse atom transfer radical polymerisation (RATRP) of methacrylates using copper(I)/pyridinimine catalysts in conjunction with AIBN

N-n-Propyl-2-pyridylmethanimine, 1, N-n-octyl-2-pyridylmethanimine, 2, N-n-lauryl-2-pyridylmethanimine, 3, and N-n-octadecyl-2-pyridylmethanimine, 4 have been used in conjunction with copper(II) bromide and azo initiators for the reverse atom transfer radical polymerisation of a range of methacrylates. AIBN to Cu^IIBr₂ ratios of 0.5:1, 0.75:1 and 1:1 give PMMA with M_n 11 500 g mol⁻¹ (PDi = 1.24) (at 22% conversion), 12 500 g mol⁻¹ (PDi = 1.06) (at 83% conversion) and 10 900 g mol⁻¹ (PDi = 1.11) (at 84% conversion), respectively. A Cu^IIBr₂ complex is demonstrated to be needed at the start of the reaction for good control over molecular weight and polydispersity as reactions using Cu(I)Br as catalyst yielded PMMA of M_n 31 000 g mol⁻¹ (PDi = 2.90), reactions with no copper yield PMMA of M_n 33 000 g mol⁻¹ (PDi = 2.95). The RATRP of styrene was carried out using Cu^IIBr₂ as catalyst. AIBN to Cu^IIBr₂ ratio of 0.5:1, 0.75:1 and 1:1 gave PS with M_n = 12 400 g mol⁻¹ (PDi = 1.27) at low conversion, M_n = 15 500 g mol⁻¹ (PDi = 1.11) and 12 400 g mol⁻¹ (PDi = 1.38), respectively at ∼85% conversion. A series of block copolymers of MMA with BMA, BzMA and DMEAMA (15 600 g mol⁻¹ (PDi = 1.18), 13 300 g mol⁻¹ (PDi = 1.14) 15 300 g mol⁻¹ (PDi) = 1.16), using a PMMA macroinitiator were prepared. Emulsion polymerisation of MMA using [initiator]:[Cu^(II)Br₂] ratio = 0.5:1 with Brij surfactant gave a linear increase of M_n with respect to conversion, final M_n = 112 800 g mol⁻¹ (PDi = 1.42). Further reactions were carried out with [initiator]:[Cu^(II)Br₂] ratio = 0.75:1 and 1:1. Both giving PMMA with M_n ∼ 32 000 g mol⁻¹ (PDi ∼ 2.4). These reactions exhibit no control, this is because the azo initiator is present in excess and all of the monomer is consumed by a free radical polymerisation as opposed to a controlled reaction. Particle size analysis (DLS) showed the particle size between 160 and170 nm in all cases.     

Crystal structure and magnetic properties of Na2Ni(HPO3)2

Na₂Ni(HPO₃)₂, obtained as light yellow-green crystals under mild hydrothermal conditions, crystallizes in the orthorhombic Pnma space-group with lattice parameters: a=11.9886(3), b=5.3671(2), c=9.0764(3) Å, V=584.01 Å³, Z=4. The structure consists of zig-zag chains of NiO₆ octahedra bridged by two HPO₃²⁻ and the chains are further connected through HPO₃²⁻ to four nearest chains to form a three dimensional framework, delimiting intersecting tunnels in which the sodium ions are located. The Na cations reside in the irregular Na(1)O₅, Na-O of 2.276-2.745 Å, and Na(2)O₉, Na-O of 2.342-2.376 Å, environments. The presence of the phosphite monoanion has been further confirmed by IR spectroscopy. Due to the 3D framework of Ni connected by O-P-O bridges, the magnetic susceptibility behaves as a paramagnet above 100 K (C=1.49(2) emu K mol⁻¹, μ_eff=3.45 μ_B, Θ=−39(2) K) and below 6 K, it orders antiferromagnetically as confirmed the sharp drop and the non-Brillouin behavior of the isothermal magnetization at 2 K.     

Enhancement of hydrolysis through the formation of mixed hetero-metal species

In order to analyze the formation of hetero-metal polynuclear hydrolytic species, in this paper, we reported some results of an investigation (at I = 0.16 mol L⁻¹ in NaNO₃, at t = 25 °C by potentiometry, ISE-H⁺, glass electrode) on the hydrolysis of several mixtures (in different ratios) of two couples of cations: dioxouranium(VI)/copper(II) and dioxouranium(VI)/diethyltin(IV). The elevated total concentrations of cations 0.005 ≤ ΣC_M mol L⁻¹ ≤ 0.05) adopted in these measurements induced us to study again the hydrolysis of uranyl, for which no suitable literature data are available in these particular experimental conditions. All measurements were performed by two different operators, using completely independent instruments and reagents. Many different speciation models were considered in the calculations, including the simultaneous refinement of homo- and hetero-metal species, and a statistical analysis of obtained results was proposed too. Main results can be summarized as follows: UO₂²⁺ and Cu²⁺ form three hetero-metal polynuclear hydrolytic species [(UO₂)Cu(OH)³⁺, (UO₂)Cu₂(OH)²⁺ and (UO₂)₂Cu₄(OH)²⁺, with log β_pqr = −2.93 ± 0.01, −7.34 ± 0.03 and −13.78 ± 0.03, respectively], all those common to their simple speciation without the other cation; UO₂²⁺ and (C₂H₅)₂Sn²⁺ form seven mixed hydrolytic species [(UO₂)(DET)(OH)³⁺, (UO₂)(DET)₂(OH)²⁺, (UO₂)₂(DET)₄(OH)²⁺, (UO₂)(DET)₂₄(OH)²⁺, (UO₂)₂(DET)⁺₅(OH), (UO₂)(DET)₂⁺₅(OH) and (UO₂)₂(DET)⁻₇(OH), with log β_pqr = −2.5 ± 0.2, −4.74 ± 0.02, −10.70 ± 0.06, −10.34 ± 0.03, −15.70 ± 0.06, −15.58 ± 0.06 and −27.9 ± 0.1, respectively] that are of the same kind of those formed by uranyl; formation of mixed hydrolytic species causes a significant enhancement of the percentage of hydrolyzed metal cations, modifying the solubility and, therefore, the bioavailability of these cations. We also determined, for dioxouranium(VI)/copper(II) system, the corresponding complex formation enthalpies and entropies by direct calorimetric measurements. We obtained ΔH₁₁₂ = 47.9 ± 0.6 and ΔH₂₁₄ = 92.9 ± 0.5 kJ mol⁻¹, TΔS₁₁₂ = 6 ± 1 and TΔS₂₁₄ = 14 ± 1 kJ mol⁻¹ (±S.D.), respectively, for the formation of (UO₂)(Cu)₂(OH)²⁺ and (UO₂)₂(Cu)₄(OH)²⁺ species (according to reaction 2). We also calculated the single enthalpic and entropic contributes to the extra-stability that these species show with respect to the corresponding homo polynuclear ones.     

New members of ternary rare-earth metal boride carbides containing finite boron-carbon chains: RE25B14C26 (RE=Pr, Nd) and Nd25B12C28

New ternary rare-earth metal boride carbides RE₂₅B₁₄C₂₆ (RE=Pr, Nd) and Nd₂₅B₁₂C₂₈ were synthesized by co-melting the elements. Nd₂₅B₁₂C₂₈ is stable up to 1440 K. RE₂₅B₁₄C₂₆ (RE=Pr, Nd) exist above 1270 K. The crystal structures were investigated by means of single-crystal X-ray diffraction. Nd₂₅B₁₂C₂₈: space group P, a=8.3209(7) Å, b=8.3231(6) Å, c=29.888(2) Å, α=83.730(9)°, β=83.294(9)°, γ=89.764(9)°. Pr₂₅B₁₄C₂₆: space group P2₁/c, a=8.4243(5) Å, b=8.4095(6) Å, c=30.828(1) Å, β=105.879(4)°, V=2100.6(2) Å³, (R1=0.048 (wR2=0.088) from 2961 reflections with I_o>2σ(I_o)); for Nd₂₅B₁₄C₂₆ space group P2₁/c, Z=2, a=8.3404(6) Å, b=8.3096(6) Å, c=30.599(2) Å, β=106.065(1)°. Their structures consist of a three-dimensional framework of rare-earth metal atoms resulting from the stacking of slightly corrugated and distorted square nets, leading to cavities filled with cumulene-like molecules [B₂C₄]⁶⁻ and [B₃C₃]⁷⁻, nearly linear [BC₂]⁵⁻ and bent [BC₂]⁷⁻ units and isolated carbon atoms. Structural and theoretical analysis suggests the ionic formulation for RE₂₅B₁₄C₂₆: (RE³⁺)₂₅[B₂C₄]⁶⁻([B₃C₃]⁷⁻)₂([BC₂]⁵⁻)₄([BC₂]⁷⁻)₂(C⁴⁻)₄·5e⁻ and for Nd₂₅B₁₂C₂₈: (Nd³⁺)₂₅([B₂C₄]⁶⁻)₃([BC₂]⁵⁻)₄([BC₂]⁷⁻)₂(C⁴⁻)₄·7e⁻. Accordingly, extended Hückel tight-binding calculations indicate that the compounds are metallic in character.     

Versatility of an intramolecularly hydrogen-bonded 4-(N,N-dimethylamino)benzoate group as a signaling subunit for anion recognition

The versatility of the 4-(N,N-dimethylamino)benzoate (DMAB) group embedded in host 1 as a signaling subunit for anion recognition was elucidated in terms of ¹H NMR, CD, and fluorescence studies. Host 1 showed 1:1 complexation with monovalent anions and stepwise 1:1 and 2:1 (host 1: anion) complexation with divalent phosphate anions. The binding constants between host 1 and anions were determined by means of ¹H NMR titrations in CD₃CN (HPO₄²⁻: log K_1:1=6.2, log K_2:1=4.9; H₂P₂O₇²⁻: log K_1:1=4.4, log K_2:1=1.8; AMP²⁻: log K_1:1>7, log K_2:1>5) and the affinity of host 1 toward divalent anions, HPO₄²⁻, H₂P₂O₇²⁻, and AMP²⁻, is stronger than that toward monovalent anions, NO₃⁻, BF₄⁻, ClO₄⁻, HSO₄⁻, and PF₆⁻. The CD exciton chirality studies of host 1 with divalent anions, HPO₄²⁻ and AMP²⁻, revealed that the two DMAB groups in the 2:1 complexes were arranged with negative chirality (counterclockwise). The dual fluorescence behavior of the DMAB group demonstrated not only the complexation stoichiometry but also the role(s) of the lipophilic countercation such as tetrabutylammonium and/or the hydrophilic residue in AMP during anion recognition.     

Synthesis, optical and electrochemical properties of new receptors and sensors containing anthraquinone and benzimidazole units

Novel anion receptors and sensors, HBIMANQ and BIMANQ fabricated from the imidazolole unit and anthraquinone moieties were synthesized. ¹H NMR spectroscopy and UV-vis titrations in DMSO-d₆ and DMSO, respectively, showed that both receptors underwent deprotonation at the NH- moiety of the amide-anthraquinone unit in the presence of basic anions such as F⁻ and AcO⁻. These phenomena gave a dramatic color change due to charge transfer transition corresponding to the shift of λ_max from 371 nm to 489 nm. Redox chemistry of HBIMANQ and BIMANQ in the presence of anions (F⁻, Cl⁻, AcO⁻, BzO⁻, and H₂PO₄⁻) using cyclic voltammetry showed the different CV responses upon addition of various anions. In the case of HBIMANQ with various anions, the CV changes are dependent on the basic strength of anions in order of F⁻>AcO⁻, BzO⁻>H₂PO₄⁻>Cl⁻, Br⁻. Interestingly, the CV responses of BIMANQ with H₂PO₄⁻ exhibited the most significant changes. BIMANQ, thus, has an excellent electrochemical selectivity toward H₂PO₄⁻.     

Energetics of cobalt phosphate frameworks: α, β, and red NaCoPO4

Thermal behavior, relative stability, and enthalpy of formation of α (pink phase), β (blue phase), and red NaCoPO₄ are studied by differential scanning calorimetry, X-ray diffraction, and high-temperature oxide melt drop solution calorimetry. Red NaCoPO₄ with cobalt in trigonal bipyramidal coordination is metastable, irreversibly changing to α NaCoPO₄ at 827 K with an enthalpy of phase transition of −17.4±6.9 kJ mol⁻¹. α NaCoPO₄ with cobalt in octahedral coordination is the most stable phase at room temperature. It undergoes a reversible phase transition to the β phase (cobalt in tetrahedra) at 1006 K with an enthalpy of phase transition of 17.6±1.3 kJ mol⁻¹. Enthalpy of formation from oxides of α, β, and red NaCoPO₄ are −349.7±2.3, −332.1±2.5, and −332.3±7.2 kJ mol⁻¹; standard enthalpy of formation of α, β, and red NaCoPO₄ are −1547.5±2.7, −1529.9±2.8, and −1530.0±7.3 kJ mol⁻¹, respectively. The more exothermic enthalpy of formation from oxides of β NaCoPO₄ compared to a structurally related aluminosilicate, NaAlSiO₄ nepheline, results from the stronger acid-base interaction of oxides in β NaCoPO₄ (Na₂O, CoO, P₂O₅) than in NaAlSiO₄ nepheline (Na₂O, Al₂O₃, SiO₂).