An efficient phosphine-free palladium coupling for the synthesis of new 2-arylbenzo[b]thiophenes

Straightforward and rapid access to 2-arylbenzo[b]thiophenes has been developed. It involved a catalytic coupling of 3-activated benzo[b]thiophenes with several aryl halides in the presence of a phosphine-free palladium system. In case of fragile functional groups such as aldehydes, a quaternary ammonium was used as an additive as with the other substrates, the coupling performed better and faster in the presence of a crown ether, the best one being DCH-18-C-6, with good yields and low reaction times. This method would provide a direct access to novel structures of biological interest.     

An efficient approach to construct 2-arylbenzo[b]furans from 2-methoxychalcone epoxides

An efficient and practical method for construction of 2-arylbenzo[b]furans from 2-methoxychalcone epoxides has been reported. Catalyzed by 2 mol % of BF₃·Et₂O, 2-methoxychalcone epoxides went through the Meerwein rearrangement, followed by deformylation in one-pot to successfully afforded 2-methoxydeoxybenzoins. Afterward, 2-arylbenzo[b]furans were obtained in high yields (87%–100%) via intermolecular cyclodehydration of 2-methoxydeoxybenzoins with 48% HBr. By utilization of this approach, the natural product stemofuran A and the key intermediate of eupomatenoid 6 have been synthesized conveniently.     

A novel efficient protocol for preparation of 3-formyl-2-arylbenzo[b]furan derivatives

An efficient method for preparation of 3-formyl-2-arylbenzo[b]furan derivatives 4 from 3-chloro-2-(2-methoxyaryl)-1-arylprop-2-en-1-one 2 was developed, and the desired product was obtained in good to excellent yields. By converting 2-(2-methoxyphenyl)-3-oxo-3-phenylpropanal 1 to 2, the regioselectivity problem occurring in the reaction when using 1 as the starting material was successfully avoided. Furthermore, a one-pot procedure for the successive demethylation, cyclization, and hydrolysis was evolved, although the intermediate 3-(dibromomethyl)-2-phenylbenzo[b]furan 3a could be isolated. A plausible mechanism was proposed based on some in situ investigations.     

An efficient one-pot three-component synthesis and antimicrobial evaluation of tetra substituted thiophene derivatives

A convenient one-pot three-component method for the preparation of tetra-substituted thiophene derivatives has been developed. Reaction of acetyl acetone 1, phenyl isothiocynate 2 and 2-chloromethyl derivatives 3a–3c in the presence of potassium carbonate afforded the target compounds, namely ethyl2-(4-acetyl-3-methyl-5-(phenylamino)thiophen-2-yl)-2-oxoacetate derivatives 4a–4e, ethyl 3-(4-acetyl-3-methyl-5-(phenylamino)thiophen-2-yl)-3-oxopropanoate derivatives 4f–4i, di((4-acetyl-3-methyl-5-phenylamino)thiophen-2-yl)ketone derivatives 4j–4n in reasonable overall yields. The synthesized compounds were screened for antimicrobial activity. The detailed synthesis, spectroscopic data and antimicrobial activities of synthesized compounds were reported.     

Synthesis of 1,3-disubstituted benzo[c]thiophene analogs containing benzo[b]thiophene/benzo[b]pyrrole

The synthesis of 1,3-disubstituted benzo[c]thiophene analogs incorporating benzo[b]thiophene/benzo[b]pyrrole units is described.     

Multibromo-N-alkylcarbazoles: synthesis, characterization, and their benzo[b]thiophene derivatives

We present an efficient method for the selective bromination of N-alkylcarbazoles using N-bromosuccinimide (NBS) in THF. Four brominated N-alkylcarbazoles including 3-bromo-, 3,6-dibromo-, 1,3,6-tribromo- and 1,3,6,8-tetrabromo-carbazoles were prepared and identified by ¹H NMR spectroscopy. Subsequent cross-coupling of these carbazoles with benzo[b]thien-2-ylboronic acid gave the corresponding benzo[b]thien-2-yl functionalized carbazoles in good yields.     

An improved synthesis of substituted benzo[b]thiophenes using microwave irradiation

An easy and high-yielding method for the synthesis of substituted benzo[b]thiophenes using microwave irradiation is described.     

Photochromic properties of diarylethene derivatives having chryso[b]thiophene rings

Diarylethene derivatives having one or two chryso[b]thiophene ring(s) have been synthesized. In solution the derivatives underwent photochromism and the derivative with one chryso[b]thiophene ring exhibited photochromism even in the single crystalline phase. The color of the UV irradiated single crystal changed from blue to green by rotation the sample under polarized light.     

Synthesis and characterization of benzo[c]thiophene analogs incorporating benzo[b]thiophene/1-hexylindole/benzo[b]furan

Synthesis of 1,3-disubstituted benzo[c]thiophene analogs incorporating heterocycles such as benzo[b]thiophene/1-hexylindole/benzo[b]furan and thiophene units is described. Optical and electrochemical studies of the benzo[c]thiophene analogs are also reported.     

Benzo[b]thiophene as a template for substituted quinolines and tetrahydroquinolines

An original methodology starting from 3-aroyl-2-(2′-nitro-4′-methoxyphenyl)-benzo[b]thiophene allows the synthesis of unusual fused heterocycles. Direct hydrogenation with nickel catalysts followed by desulfurisation led to 2,3-diarylquinolines or 2,3-diaryltetrahydroquinolines.     

Electrogenerated base-promoted synthesis of tetrahydrobenzo[b]pyran derivatives

An efficient and convenient synthesis of tetrahydrobenzo[b]pyrans is described, using an electrogenerated base of the anion of malononitrile in a one-pot, three component condensation of an aromatic aldehyde, an active methylene compound and dimedone. The reaction is carried out at room temperature in acetonitrile with the use of a sacrificial magnesium anode in a single-compartment cell.     

An efficient and facile synthesis of substituted cinnoline and benzo[h]cinnoline derivatives

New substituted 3-amino-5,7,8-trihalo-6-hydroxycinnoline-4-carbonitriles 7 and 8 and the 3-amino-5-chloro-6-hydroxy-benzo[h]cinnoline-4-carbonitrile 9 were synthesized in two-steps starting from tetrahalo-1,4-benzoquinones or dichloro-1,4-naphthoquinones, malononitrile and hydrazine.     

An unexpected route toward the synthesis of spiro-benzo[b]acridine-furan derivatives

A facile and straightforward procedure for the synthesis of spiro-benzo[b]acridine-6,2′-furan derivatives via the reaction between benzo[b]acridine-6,11-dione, electron-deficient acetylenic compounds, and an isocyanide is described. The benzo[b]acridine-6,11-dione is obtained from the reaction between 2-(aminomethyl)aniline and 2-hydroxynaphthalene-1,4-dione via an unexpected reaction pathway. The products are synthesized in medium to high yields and no complicated purification is required.     

An efficient and regioselective one-pot multi-component synthesis of pyrimido[4,5-d]pyrimidine derivatives in water

Pyrimido[4,5-d]pyrimidine derivatives 4 have been prepared in an efficient and regioselective manner in water via multi-component reaction of isothiocyanate 1, aromatic aldehyde 2, N,N-dimethyl-6-amino uracil 3 in the presence of p-toluenesulfonic acid (p-TSA) as a Lewis acid catalyst.     

One-pot synthesis of 5,6-dihydroxylated benzo[b]furan derivatives

In the presence of sodium iodate and pyridine, several 5,6-dihydroxylated benzo[b]furan derivatives were synthesized via oxidation-Michael addition of β-dicarbonyl compounds with catechols in a one-pot procedure. The final products were confirmed by ESMS, NMR, and single-crystal X-ray diffraction study. The mechanism different from that of electrochemical methods was proposed based on DFT calculation.     

Stereodefined ring contraction-rearrangement of thiocoumarins to new fused benzo[b]thiophene derivatives

Mesoionic 1,3-oxazolium-5-olates (münchnones) react with thiocoumarins having an electron-withdrawing group at the 3-position to afford stereodefined fused polycyclic thienopyrroles. The reaction sequence seems to be triggered by a regiospecific dipolar cycloaddition followed by ring opening of the initial 1:1 cycloadduct and intramolecular rearrangement with an unusual ring contraction.     

An efficient synthesis of spiro[dibenzo[b,i]xanthene-13,3′-indoline]-pentaones and 5H-dibenzo[b,i]xanthene-tetraones

Spiro[dibenzo[b,i]xanthene-13,3′-indoline]-pentaones and 5H-dibenzo[b,i]xanthene-tetraones are synthesized from the condensation of 2-hydroxynaphthalene-1,4-dione with isatins or aldehydes.     

Application of directed metalation in synthesis. Part 4: Expedient synthesis of substituted benzo[b]thiophene and naphthothiophene

A short, simple and inexpensive synthesis of several diversely substituted benzo[b]thiophenes and one naphthothiophene is described. The method involves introduction of methylsulfanyl group ortho- to the amide function of readily available N,N-diethylamides of aryl carboxylic acid by directed metalation. Thioindoxyls, obtained in high yields through side-chain deprotonation and cyclisation in one pot, are reduced to benzo[b]thiophene or napthothiophene.     

A one-pot synthesis of substituted pyrido[2,3-b]indolizines

An efficient and novel approach to the synthesis of substituted pyrido[2,3-b]indolizine-10-carbonitriles was developed. These structures are practically unavailable through previously described methods. The cascade transformation involves the reaction of α,β-unsaturated carbonyl compounds with a stable dimer prepared from 1-(cyanomethyl)pyridinium chloride. The reaction was performed under reflux conditions in ethanol/water and in the presence of sodium acetate. This procedure represents a eco-friendly regioselective approach to the pyrido[2,3-b]indolizine core structure.     

An efficient route for the construction of cyclopenta[b]quinoline derivatives via intramolecular cyclopropanation

A one-pot process to introduce diazoacetoacetate functionality into quinoline was identified with excellent yield and regioselectivity. An intramolecular cyclopropanation of the resulting adducts gave tetracyclic cyclopenta[b]quinoline derivatives in nearly quantitative yields. A synthetic utility of the tetracyclic derivatives was examined by a simple ring opening reaction to afford cyclopenta[b]quinoline in a good yield.