MP2 study of the proton-donating power of 100% fluorosulfonic and chlorosulfonic acids

The energies of gas-phase solvation of the FSO₃H ₂ ⁺ , and ClSO₃H ₂ ⁺ cations and FSO ₃ ^? , ClSO ₃ ^? anions by one molecule of the respective acid (FSO₃H or ClSO₃H) have been calculated by a quantum chemical method taking into account electron correlation in terms of MP2 theory with a 6-311++G(d,p) basis set. The energy of additional solvation of the resulting complexes by liquid acid has been estimated within the continuum model of solvation by the IPCM method, with the acid modeled as a continuum with a large dielectric constant. The calculated data have provided a quantitative estimate for the energy of self-ionization of liquid FSO₃H and ClSO₃H acids. The similarly calculated energy of solvation of protons in 100% fluorosulfonic and chlorosulfonic acids is lower than the heat of hydration of the proton in aqueous solution by 23.4 and 24.5 kcal/mol, respectively. These quantum chemical data explain why 100% liquid fluorosulfonic and chlorosulfonic acids exhibit the properties of a superacid.     

Preparation,Characterization and Anticoagulant Activity of Guar Gum Sulphate

Guar gum was chemically modified by sulphonation using chlorosulphonic acid (ClSO₃H) as a reagent. Effects of molar ratio of ClSO₃H to glucopyranosic unit (ClSO₃H/GU), reaction time and reaction temperature on the degree of sulphonation (DS) and molecular weight (Mw) of products were studied. The structures of guar gum sulphate were investigated by GPC, FT‐IR and UV‐Visible spectroscopy. Activated partial thromboplastin time (APTT) assay showed that the guar gum sulphate could inhibit the intrinsic coagulant pathway. The anticoagulant activity strongly depended on the DS and Mw of polysaccharides. DS>0.56 was essential for anticoagulant activity. The guar gum sulphate with the DS of 0.85 and the Mw of 3.40×10⁴ had the best blood anticoagulant activity.     

Initiating radical cyclizations by H transfer from transition metals

CpCr(CO)₃H and HV(CO)₄(P-P) (where P-P is a chelating diphosphine) can be used to initiate radical cyclizations by transferring H to activated terminal olefins. CpCr(CO)₃H can catalyze reductive cyclizations, with H₂ as the ultimate reductant. Appropriate substrates can be assembled by the Morita-Baylis-Hillman reaction of methyl acrylate with an aldehyde. Six- as well as five-membered rings can be formed, and a tandem cyclization to decalin can be effected.     

Gamma Radiation-Induced Graft Copolymerization of Styrene Onto Polyethyleneterephthalate Films: Application in Fuel Cell Technology as a Proton Exchange Membrane

Polyethyleneterephthalate (PET) based proton exchange membrane for using in fuel cells was successfully prepared by gamma radiation-induced graft copolymerization of styrene monomer onto PET film and the consequent selective sulfonation of the grafting chain in the film state using chlorosulfonic acid (ClSO₃H). The effects of grafting conditions (e.g., monomer concentration, irradiation dose) on the degree of grafting and sulfonation condition (e.g., optimum concentration of ClSO₃H) on the degree of sulfonation were studied. The degree of grafting, the degree of sulfonation and the physico-chemical properties (such as, water uptake, mechanical strength, thermal durability, hydrolytic stability, oxidative stability) of the gamma radiation-induced grafted membrane were found to be better when compared to those of the UV-radiation grafted membrane. The membrane shows higher ion exchange capacity (0.9 mmol g^?1) and higher proton conductivity (0.075 S cm^?1), similar to those of Nafion membrane.     

Triflic acid promoted synthesis of polycyclic aromatic compounds

The triflic acid (CF₃SO₃H) promoted cyclizations of 2-styrylbiaryls are found to be useful for the synthesis of polycyclic aromatic compounds, including functionalized derivatives of polycyclic aromatic compounds and heterocyclic systems. The reaction involves cationic cyclization followed by an elimination of benzene from the intermediate product.     

Nano‐Fe3O4@SiO2‐SO3H: A magnetic,reusable solid‐acid catalyst for solvent‐free reduction of oximes to amines with the NaBH3CN/ZrCl4 system

In this study, the immobilization of sulfonic acid on silica‐layered magnetite was carried out by the reaction of ClSO₃H with silica‐layered magnetite. The prepared magnetic nanoparticles of Fe₃O₄@SiO₂‐SO₃H were then characterized using scanning electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry, and transmission electron microscopy. The sulfonated nanocomposite exhibited excellent catalytic activity and reusability in the reduction of various aldoximes and ketoximes with NaBH₃CN in the presence of ZrCl₄. All reactions were carried out under solvent‐free conditions (r.t. or 75–80°C) within 3–70 min to afford amines in high to excellent yields.     

Stoichiometric and Catalytic C−C and C−H Bond Formation with B(C6F5)3 via Cationic Intermediates

This work showcases a new catalytic cyclization reaction using a highly Lewis acidic borane with concomitant C−H or C−C bond formation. The activation of alkyne‐containing substrates with B(C₆F₅)₃ enabled the first catalytic intramolecular cyclizations of carboxylic acid substrates using this Lewis acid. In addition, intramolecular cyclizations of esters enable C−C bond formation as catalytic B(C₆F₅)₃ can be used to effect formal 1,5‐alkyl migrations from the ester functional groups to unsaturated carbon–carbon frameworks. This metal‐free method was used for the catalytic formation of complex dihydropyrones and isocoumarins in very good yields under relatively mild conditions with excellent atom efficiency.     

Superacid-promoted synthesis of indolizidine derivatives

A series of amido-acetals were reacted with the Brønsted superacid, CF₃SO₃H, to provides indolizidine derives by a cyclization cascade. A mechanism is proposed involving formation of a vinylogous enol which undergoes a 6π-electrocyclization reaction with an adjacent N-acyl iminium ion group. With aryl substituents, there is a strong tendency for the N-acyl iminium ion group to undergo Friedel-Crafts type cyclizations with the aryl group. The synthetic methodology was used to prepare the alkaloid natural product, ipalbidine.     

Domino Friedel-Crafts-type cyclizations of difluoroalkenes promoted by the α-cation-stabilizing effect of fluorine: an efficient method for synthesizing angular PAHs

In order to synthesize polycyclic aromatic hydrocarbons with nonlinear arrangements (angular PAHs), acid‐promoted domino cyclizations of 1,1‐difluoroalk‐1‐enes and 1,1‐difluoroalka‐1,3‐dienes were studied. 1,1‐Difluoroalkenes, each bearing two aryl substituents, were regioselectively protonated with FSO₃H?SbF₅ to generate fluorine‐stabilized carbocations, which readily underwent domino Friedel–Crafts‐type cyclizations to give carbocycles based on 6/n/m/6 ring systems (n,m=5–7) in good to high yields. Protonation of 1,1‐difluoroalka‐1,3‐dienes took place at their electron‐rich methylene (CH₂) carbon atoms in the presence of milder acids such as camphorsulfonic acid and trifluoromethanesulfonic acid. Domino cyclizations of the resulting fluorine‐stabilized allylic carbocations afford carbocycles based on 6/6/6/6 or 6/6/5/6 ring systems in high yields.     

Optimization of the synthesis of phenanthrene-2- and -3-sulfonyl chlorides

Sulfonation of phenanthrene with sulfuric acid, followed by neutralization with sodium hydroxide, gave a mixture of isomeric sodium phenanthrenesulfonates in an overall yield of 83%. Sodium phenanthrene-2-, -3-, and -9-sulfonates were isolated in 17, 43, and 4% yield, respectively. Sulfonation of phenanthrene with ClSO₃H or SO₃ did not improve the yields of phenanthrene-2- and -3-sulfonic acids. Treatment of sodium phenanthrene-2- and -3-sulfonates with PCl₅-POCl₃ or SOCl₂-DMF afforded the corresponding sulfonyl chlorides in 89 and 87 or 69 and 70% yield, respectively. Pure phenanthrene-2- and -3-sulfonyl chlorides were also synthesized in 27 and 51% yield by reaction of a mixture of 2- and 3-sulfonates with PCl₅-POCl₃.     

UV radiation induced graft copolymerization of allyl acetate onto poly(ethylene terephthalate) (PET) films for fuel cell membranes

Ultraviolet（UV）-induced graft copolymerization of allyl acetate（AA） monomer onto polyethylene terephthalate) （PET） films and the subsequent sulfonation on the monomer units in the grafting chain using chlorosulfonic acid（ClSO₃H） were carried out to prepare proton exchange membranes（PEMs） for fuel cells.A maximum grafting value of 12.8%was found for 35 vol%allyl acetate after 3 h radiation time.Optimum concentration of C1SO₃H was selected for the sulfonation reaction to be 0.05 mol/L based on the degree of sulfonation and the tensile strength studies of the membrane.The degree of sulfonation increased as the sulfonation reaction temperature and sulfonation time were increasing.The radiation grafting and the sulfonation have been confirmed by titrimetric and gravimetric analyses as well as FTIR spectroscopy.The maximum ion exchange capacity（IEC） of 0.04125 mmol g^-1 was found at 12.1%degree of sulfonation and the maximum proton conductivity was found to be 0.035 S cm^-1 at 30℃and a relative humidity of 60%.The various physical and chemical properties of the PEMs such as water uptake,mechanical strength,thermal durability and oxidative stability were also studied.To investigate the suitability of the prepared membrane for fuel cell applications,its properties were compared with those of Nafion 117.     

Direct sulfation of bacterial cellulose with a ClSO3H/DMF complex and structure characterization of the sulfates

Bacterial cellulose (BC) is a form of cellulose synthesized by microorganisms, which has unique structure properties and differs from plant cellulose. Up to now, chemical modification of BC has not been studied widely. This paper aims to prepare sodium bacterial cellulose sulfate (SBS) in N,N‐dimethylformamide (DMF) with a ClSO₃H/DMF complex as the sulfating agent. SBSs with diverse degree of sulfation (DS, 0.04–0.86) were synthesized. The system could change from heterogeneous to homogeneous during the sulfation. Regarding to the DS, the optimal ClSO₃H amount and reaction time were 6 mol/mol anhydroglucose unit and 4 h, respectively. DS increased a little when increasing the temperature, while the yield decreased significantly. SBSs with DS > 0.24 were soluble in deionized water. Carbon nuclear magnetic resonance spectroscopy revealed that the sulfation prefers to take place in the order of C‐6 > C‐2 > C‐3. The X‐ray diffraction profiles indicated that the crystalline structure of BC was destroyed during sulfation. BC has better reactivity than microcrystalline cellulose in both sulfation and depolymerization processes. SBS is a potential biomaterial. However, BC depolymerized obviously in present sulfation, which forbids application of SBS in material. Moisture of the reaction mixture should be removed as completely as possible to guarantee efficient sulfation and decrease depolymerization. Copyright © 2013 John Wiley & Sons, Ltd.     

The Influence of the Counterions [AsF6]– and [GeF6]2– on the Structure of the [ClSO2NH3]+ Cation

Chlorosulfonamide reacts in the superacidic solutions HF/GeF₄ and HF/AsF₅ under the formation of ([ClSO₂NH₃]⁺)₂[GeF₆]^2– and [ClSO₂NH₃]⁺[AsF₆]^–, respectively. The chlorosulfonammonium salts were characterized by X‐ray single crystal structure analysis as well as vibrational spectroscopy and discussed together with quantum chemical calculations. ([ClSO₂NH₃]⁺)₂[GeF₆]^2– crystallizes in the triclinic space group P1 with one formula unit in the unit cell. [ClSO₂NH₃]⁺[AsF₆]^– crystallizes in the monoclinic space group P2₁/n with four formula units in the unit cell. Dependent on the counterion, [AsF₆]^– or [GeF₆]^2–, considerable structural differences of the [ClSO₂NH₃]⁺ cation are observed. Furthermore, the hitherto unknown X‐ray single crystal structure of chlorosulfonamide is determined in the course of this study. Chlorosulfonamide crystallizes in the orthorhombic space group Pmc2 with four formula units per unit cell.     

Pd-catalyzed asymmetric Wacker-type cyclization of o-trisubstituted allylphenols by use of tetraoxazoline ligands

Pd(II)-catalyzed intramolecular Wacker-type cyclizations of o-trisubstituted allylphenols were studied. The chelation-induced axially chiral catalytic system, Pd(CF₃COO)₂-8 (1:1 molar ratio), showed excellent catalytic activities and enantioselectivities in the Wacker-type cyclizations of o-trisubstituted allylphenols with up to 94% ee.     

Interaction of polynitro compounds with difluoroamine

Difluoroamine does not react with tetranitromethane and fluoro-, chloro-, and bromotrinitromethanes in DMF and in acidic media (CF₃COOH, ClSO₃H, FSO₃H, and oleum), but reacts with α-fluoro- and α-(difluoroamino)-α,α-dinitrotoluenes to give substitution products of the difluoroamino group for both the nitro groups,viz., PhC(NF₂)₂F and PhC(NF₂)₃, respectively. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1647–1649, August, 1998.     

Experimental and theoretical studies on the transannular cyclizations of 3,7-dimethylenebicyclo[3.3.1]nonane with polyfluoroalkyl radicals

Radical cyclizations of 3,7-dimethylenebicyclo[3.3.1]nonane with CF₃I, n-C₃F₇I, ICF₂COOEt and ICF₂PO(OEt)₂ selectively led to corresponding 3,7-noradamantanes, which were used for preparation of various polyfluoroalkyl substituted noradamantyl amines and carboxylates. DFT computations revealed that chemoselectivity of the radical cyclizations is realized due to the high electrophilicity of the CF₃ radical, as well as due to efficient trapping of intermediate noradamantylmethyl radicals by perfluoroiodoalkane.     

Pd- and Cu-catalyzed C–H arylation of indazoles

The palladium- and copper-catalyzed C–H arylation reactions of 1H- and 2H-indazoles with haloarenes are described. A PdCl₂/phen/Ag₂CO₃/K₃PO₄ catalytic system is effective for the C–H arylation of 1H- and 2H-indazoles with haloarenes, whereas a less expensive CuI/phen/LiOt-Bu catalytic system is applicable to the C–H coupling of substituted 2H-indazoles and iodoarenes. The utility of newly developed catalyst was demonstrated in the rapid synthesis of YC-1 (an antitumor agent) and YD-3 (platelet anti-aggregating agent). These new reactions represent important direct functionalization tools of indazoles, well-known bioisosteres of pharmaceutically important indole core.     

Characterization of a few Mexican clays

The characterization of a few Mexican clays with chemical treatmentfor possible application as catalysers is shown. The natural clays are treatedwith H₂ SO₄ , HF, F₃ CSO₃ H, ClSO₃ H, HClO₄ and their behavior in reactions with some alcoholswas recorded. The analysis were made before and after using the clays as catalysers.The clays were characterized by Mössbauer spectroscopy, X-ray diffraction,X-ray fluorescence analysis, and differential thermo analysis. The predominantmineral species are: montmorillonite, christobalite and quartz. The main elementsare: Si, Al, Fe, Ca, K, etc. The Mössbauer results show mainly a paramagneticdoublet of Fe₃₊ . The clays behave similarly as described in theliterature.     

Silicon-directed nazarov cyclizations VII: Linearly-fused tricyclics

A new modification of the silicon-directed Nazarov cyclization is described which involves the cyclization of divinyl ketones incorporating an allylsilane as the control unit. The cyclizations are extremely facile with FeCl₃ or BF₃·OEt₂ as the Lewis acid. Four permutations of five- and six-membered ring substrates have been examined. In all cases the reactions are regio- and stereoslective. In the 6-5-6 (6ba) and 5-5-6 (6ba) systems the major product has the trans-anti configuration. The ability to incorporate a methyl substituent on the double bond and in the ring has been addressed.     

FeCl3-NaI mediated reactions of aryl azides with 3,4-dihydro-2H-pyran: a convenient synthesis of pyranoquinolines

The tetrahydroquinoline moiety is an important structural component of a number of natural products. The reaction of aryl azides with 3,4-dihydro-2H-pyran in the presence of FeCl₃-NaI affords the corresponding tetrahydroquinoline derivatives in an efficient manner. Most of the cyclizations exhibited cis selectivity.