Synthesis of B-trisubstituted borazines via the rhodium-catalyzed hydroboration of alkenes with N,N′,N″-trimethyl or N,N′,N″-triethylborazine

Hydroboration of terminal and internal alkenes with N,N′,N″-trimethyl- and N,N′,N″-triethylborazine was carried out at 50 °C in the presence of a rhodium(I) catalyst. Addition of dppb or DPEphos (1 equiv.) to RhH(CO)(PPh₃)₃ gave the best catalyst for hydroboration of ethylene at 50 °C, resulting in a quantitative yield of B,B′,B″-triethyl-N,N′,N″-trimethylborazine. On the other hand, a complex prepared from (t-Bu)₃P (4 equiv.) and [Rh(coe)₂Cl]₂ gave the best yield for hydroboration of terminal or internal alkenes.     

Catalytic photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine and carbon dioxide

Photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine (TMB) in MeCN under bubbling of CO₂ proceeded with high catalytic efficiency, giving 3,3-diphenylacrylic acid (DPA) and 3-hydroxy-3,3-diphenylpropionic acid (20). The turnover number (TON=(DPA+20)/TMB) reached 17. Similarly, 1-phenyl-1-cyclohexene yielded cis-2-acetamido-2-phenylcyclohexanecarboxylic acid with TON 5.9. As compared with related N,N-dimethylaniline derivatives, TMB is more resistant to photodecomposition, has the much larger absorbance in the S₀→S₁ transition, and has the lower quenching efficiency by CO₂. Probably these factors are partly responsible for the high TON observed for TMB.     

Copper(I) catalysis: Synthesis of N,N′-diarylated and N-aryl,N′-formylated chiral C2-symmetric diamines

Chiral N,N′-diaryl C₂-symmetric diamines and N-aryl,N′-formyl-trans-(1R,2R)-diaminocyclohexane are readily accessed by copper catalyzed N,N′-diarylation and N-aryl,N′-formylation of trans-(1R,2R)-diaminocyclohexane with aryl bromides. N,N′-diarylation using (R)-1,1′-binaphthyl-2,2′-diamine and iodobenzene gave the corresponding (R)-N,N′-diphenyl-1,1′-binaphthyl-2,2′-diamine derivative in 83% yield.     

Efficient synthesis of N,N′-dialkyl-N″-dialkylaminocarbothioyl thioureas from cyclic secondary amines, CS2, and N,N′-dialkyl carbodiimides in water

A mild, convenient, and practical one-pot procedure for direct synthesis of N,N′-dialkyl-N″-dialkylaminocarbothioyl thioureas is described via three-component reaction of cyclic secondary amines, CS₂, and N,N′-dialkyl carbodiimides in water at room temperature.     

Synthesis of N,N′-bis and N,N,N′,N′-tetra-[(3,5-di-substituted-1-pyrazolyl)methyl]para-phenylenediamines: new candidate ligands for metal complex wires

A series of tridentate ligands N,N-bis-[(di-substituted-1-pyrazolyl)methyl]arylamines 2-3a,b and benzylamine 4a,b, tetradentate N,N′-bis-[(di-substituted-1-pyrazolyl)methyl]para-phenylenediamines 7a,b and hexadentate N,N,N′,N′-tetra-[(di-substituted-1-pyrazolyl)methyl]para-phenylenediamines 8a,b has been prepared in good yield by condensation of arylamines, benzylamine or para-phenylenediamine with N-hydroxymethyl disubstituted pyrazoles 1a,b. The synthesis and characterisation of these various polydentate ligands are described.     

Mild and regioselective iodination of aromatic compounds with N,N′-diiodo-N,N′-1,2-ethanediylbis(p-toluenesulphonamide)

N,N′-Diiodo-N,N′-1,2-ethanediylbis(p-tolouenesulphonamide) [NIBTS] and catalytic trifluoroacetic acid can be used for the regioselective iodination of aromatic compounds in acetonitrile under mild conditions in excellent yields.     

Poly(N-bromobenzene-1,3-disulfonamide) and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide as novel catalytic reagents for silylation of alcohols, phenols, and thiols using hexamethyldisilazane

Poly(N-bromobenzene-1,3-disulfonamide) [PBBS] and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide [TBBDA] are effective catalysts for the silylation of alcohols, phenols, and thiols in the presence of hexamethyldisilazane with, or without solvent, and also under microwave irradiation.     

A concise synthesis of asymmetrical N,N′-disubstituted guanidines

We present a new and concise method for the preparation of asymmetrical N,N′-disubstituted guanidines starting from thiourea via the reaction of N-Boc-protected N′-alkyl/aryl substituted thioureas with an amine in the presence of mercury(II) chloride and triethylamine.     

Influence of N,N,N′,N′-tetraalkyl terephthalamide on isothermal crystallization kinetics and morphology evolution of polypropylene

The influence of N,N,N′,N′-tetraalkyl terephthalamide (TATA) on the isothermal crystallization kinetics of polypropylene (PP) was studied using differential scanning calorimetry (DSC). It was found that TATA shows a heterogeneous nucleation effect and leads to the formation of β-PP. TATA can not only shorten the crystallization time but also heighten the crystallization temperature of PP. The crystallization rate constant of PP containing TATA is larger than that of pure PP. The evolution of crystalline morphology of PP was investigated on a polarized optical microscopy (POM) equipped with a hot stage and the results showed that the introduction of TATA into PP can quicken the crystallization of PP, which is consistent with DSC results. TATA also leads to a substantial decrease in the spherulite size of PP and the boundaries of spherulites are hardly distinguished.     

Helicity of N,N′-diaryl-trans-1,2-diaminocyclohexane derivatives. Implications for molecular helicity manipulations

Derivatives of trans-1,2-diaminocyclohexane (DACH), useful as chiral ligands, scaffolds and building blocks, differ in their conformation. The conformation of N,N′-diaryl-DACH derivatives was studied by the semiempirical and DFT computational methods and by exciton-coupled circular dichroism. It was found that, contrary to M-helical N,N′-diimine, N,N′-diimide and N,N′-diamide derivatives, the aromatic residues in N,N′-diphenyl derivatives are oriented to form a P-helix for the (R,R)-DACH absolute configuration. The helicity of the bis-aryl system is modified in the case of 1-naphthyl or 2-naphthyl derivatives. Further switching of helicity has been demonstrated by either protonation or mono-N-acetylation of N,N′-diaryl DACH derivatives.     

Controlling electron delocalisation in constrained N,N′-dimethyl-4,4′-bipyridinium dications

The synthesis is described of two N,N′-dimethyl-4,4′-bipyridinium salts for which the two pyridinium rings are connected via varying length alkoxy chains attached at the 3,3′-locations.     

An N,N′-diaryl urea based conjugated polymer model system

An N,N′-diphenyl urea was designed as a model system for aggregation phenomenon in poly(phenyleneethynylenes) (PPEs). The unmethylated N,N′-diphenyl urea adopts an open, unfolded conformation in which the two diphenyl acetylene fluorophores are far enough away, mimicking the unaggregated state. Dimethylation forces the aromatic surfaces together into π-π contact, mimicking the aggregated state of PPEs. Analogous to bulk PPEs, this model system shows dramatic differences in quantum yield between the folded and unfolded states, with the unfolded urea having greater than 400-fold higher fluorescence quantum yield than its folded equivalent.     

DFT study of the reaction sites of N,N′-substituted p-phenylenediamine antioxidants

The geometry of N,N′-diphenyl-p-phenylenediamine (DPPD), N-phenyl-N′-(1′-methylbenzyl)-p-phenylenediamine (SPPD), N-phenyl-N′-(1,3-dimethyl-butyl)-p-phenylenediamine (6PPD), N-phenyl-N′-isopropyl-p-phenylenediamine (IPPD), and N-(1-methyl-1-phenylethyl)-N′-phenyl-p-phenylenediamine (CPPD) as well as of their dehydrogenation products has been optimized at B3LYP/6-31G^∗ level of theory. Our results support the idea of formation of stable ketimine Ph-NC structures (instead of quinonediimine structures) during consecutive dehydrogenation of SPPD, 6PPD, and IPPD antioxidants despite the formation of tertiary carbon-centered radicals in the first dehydrogenation step is energetically preferred for SPPD only.     

Synthesis and derivatisation of N,N′-trisubstituted 1,2-diamines derived from (1R,2R)-1,2-diaminocyclohexane

The synthesis of N,N′-trisubstituted 1,2-diamines can be achieved by simple reduction of an aminal derived from (1R,2R)-diaminocyclohexane. We comment on the scope and limitation of this reduction and discuss its application towards the synthesis of unsymmetrical N,N′-tetrasubstituted 1,2-diamines.     

Synthesis and properties of N,N,N′,N′-tetrasubstituted 1,3-bis(5-aminothien-2-yl)azulenes and their application as a hole-injecting material in organic light-emitting devices

Two title compounds, N,N,N′,N′-tetraphenyl-1,3-bis(5-aminothien-2-yl)azulene (3a) and 1,3-bis{5-(9-carbazolyl)thien-2-yl}azulene (3b), were synthesized from 1,3-di(2-thienyl)azulene (4) by a two-step sequence involving bromination and subsequent Pd-catalyzed amination. These compounds were characterized by spectroscopic analyses and the structure of 3a was determined by X-ray crystallographic analysis. Their HOMO energy levels were estimated using their electrochemical oxidation potentials, and these compounds were used as a hole-injecting material in organic light-emitting devices. The device with 3a showed greater durability than that with copper phthalocyanine.     

On the interactions of N,N′-bismesitylimidazolin-2-yl and alcohols

The interaction of N,N′-bismesitylimidazolin-2-yl (IMes) with alcohols is discussed. NMR spectroscopy and X-ray crystallography were used to examine the influence of solvent and alcohol on this interaction. The stabilizing effect of these interactions may be used for the storage of nitrogen-heterocyclic carbenes (NHCs) since removal of the volatiles liberates the NHC.     

Lithiation of 2-(chloroaryl)-2-aryl-1,3-dioxolanes with butyllithium activated by N,N,N′,N″,N″-pentamethyldiethylenetriamine

Intramolecular competition of variously substituted phenyl rings of benzophenone ketals in lithiation reactions proved to be a useful tool to study both ortho-directing ability and long-range effects of the substituents. The regioselectivities observed in the reaction of benzophenone ketals having one or two chloro substituents in one of the aryl rings with butyllithium complexed to N,N,N′,N″,N″-pentamethyldiethylenetriamine demonstrate the significance of both ortho- and meta-acidifying effect of the chloro substituents. The lithio species thus generated were carboxylated resulting in new polysubstituted benzoic acids.     

N,N′,N″-Tri-Boc-guanidine (TBG): a common starting material for both N-alkyl guanidines and amidinoureas

In this Letter, we describe the unexpected reaction pattern of N,N′N″-tri-Boc-guanidine (TBG) with amines at room temperature and under reflux conditions affording N-substituted guanidines and amidinoureas, potentially important compounds with extensive applications in medicinal chemistry. This investigation shows that TBG is an excellent, readily available common starting material for the synthesis of various N-alkyl guanidines as well as N-alkyl-N′-substituted amidinoureas by simply manipulating the reaction conditions.     

Synthesis of N,N′-disubstituted cyclic 1,2-diamines derived from (1R,2R)-1,2-diaminocyclohexane

The synthesis of N,N′-unsymmetrically tetrasubstituted cyclic 1,2-diamines derived from (1R,2R)-diaminocyclohexane is reported. We comment on the structural nature of these cyclic 1,2-diamines and discuss their characteristic features.