Novel and efficient approach to (Z)-4-trifluoroethylidene-1,3-dioxolane derivatives via (trifluoromethyl)ethynylation of ketones and aldehydes

Perfluoroalkylated 4-trifluoroethylidene-1,3-dioxolanes 2a-p were prepared in quantitative yields from the reaction of new stable (trifluoromethyl)ethynylation reagent 1a with TBAF at −15 °C for 10 min, followed by treatment with phenyl perfluoroalkylated ketones at room temperature. The use of aldehydes under the same reaction condition afforded 1,3-dioxolanes 2q-r in good yields. The reaction of 1a with TBAF, followed by treatment with aldehydes or ketones at −15 °C for 10 min and then with trifluoroacetophenone at room temperature provided 1,3-dioxolane derivatives 2s-t in good yields. Tetrabutylammonium trifluoropropynylide [II] was treated with benzaldehyde derivatives at −15 °C for 10 min, followed by treatment with trifluoroacetophenone, to give the corresponding 1,3-dioxolanes 2u-z and 1,3-dioxines 3u-z with different reaction condition.     

Novel photoinitiated cationic copolymerizations of 4-methylene-2-phenyl-1,3-dioxolane

Photoinitiated polymerization of 4-methylene-2-phenyl-1,3-dioxolane ( 1 ) was carried out using either tris (4-methylphenyl) sulfonium hexafluoroantimonate or 4-decyloxyphenyl phenyliodonium hexafluoroantimonate as initiators. ¹H-NMR analyses confirmed exclusive ring-opening while DSC and SEC were used to determine the glass transition temperatures (T_gs) and molecular weights, respectively. Photoinitiated cationic copolymerizations of 1 were investigated with several acyclic and cyclic monomers. Copolymerization of 1 with vinyl ethers and a spiroorthoester resulted in copolymers whose thermal properties were dependent on comonomer ratios. Copolymers of 1 and dihydrofuran or dihydropyran afforded soluble polymers with T_gs significantly higher than the homopolymer of 1 . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2207–2219, 1997     

Cationic ring-opening polymerization of 2-isopropenyl-4-methylene-1,3-dioxolane

Preparation and cationic ring-opening polymerization of 2-isopropenyl-4-methylene-1,3-dioxolane ( VI ) was performed. Unsaturated cyclic acetal VI was prepared by dehydrochlorination of 2-isopropenyl-4-chloromethyl-1,3-dioxolane, which was easily obtained from methacrolein and epichlorohydrin, with sodium methoxide at ambient temperature. The cationic polymerization of VI with BF₃OEt₂ or CF₃SO₃H at ?78°C afforded only crosslinked polymers, whereas the polymerization by CH₃SO₃H gave soluble poly(keto-ether) which consisted of units VII containing an isopropenyl group in the side chain and units VIII containing a carbon-carbon double bond in the main chain. The reaction of VI with ethanethiol in the presence of protic acid was also carried out as a model reaction of the polymerization. The reaction initiated by the addition of proton to the 4-methylene group of VI , and quantitative ring-opening isomerization followed by the addition of ethanethiol afforded acyclic ketone IX and X . On the basis of the model reaction, the polymerization mechanism is also discussed. © 1993 John Wiley & Sons, Inc.     

Remarkable effect of metal fluoride catalyst on reaction of hexafluoropropene, sulfur and vinyl ethers. Convenient synthesis of 2,2-bis(trifluoromethyl)-4-R-thietanes, 3,3-bis(trifluoromethyl)-5-R-1,2-dithiolanes and 2,2-bis(trifluoromethyl)-4-R-1,3-dithiolanes

It was demonstrated that the outcome of the reaction of hexafluoropropene, sulfur and vinyl ether strongly depends on the catalyst and reaction conditions. The reaction of HFP and S_x leading to the formation of 2,2,4,4-tetrakis(trifluoromethyl)-1,3-dithietane (1) when it is catalyzed by CsF, proceeds under milder conditions and is easier to control compared to KF catalyzed process. The order of addition of reagents plays a crucial role on the outcome of the reaction. For example, the addition of vinyl ether to pregenerated solution of 1 in DMF solvent results in slow reaction, leading to the corresponding 2,2-bis(trifluoromethyl)-4-R-thietanes in 8-91% yield, and it is catalyzed by either by KF or CsF. The addition of second mole of sulfur to the solution of 2,2-bis(trifluoromethyl)-4-R-thietanes in the presence MF catalyst leads to insertion of sulfur into thietane ring with the formation of the corresponding cyclic disulfides—3,3-bis(trifluoromethyl)-5-R-1,2-dithietanes. On the other hand, the addition of second mole of sulfur to the solution of 1 in DMF in the presence of CsF catalyst, followed by addition of vinyl ether results in exothermic reaction, and it produces the corresponding 2,2-bis(trifluoromethyl)-4-alkoxy-1,3-dithiolanes in good yield.It was also demonstrated that 2,2-bis(trifluoromethyl)-4-R-thietanes can undergo disproportionation under action of fluoride anion, producing a mixture of the corresponding 1,2-dithiolane and CF₂C(CF₃)CH₂CFHOR. The nucleophilic attack of fluoride anion in this case proceeds selectively on the carbon of the thietane ring, bearing alkoxy group.The structure of 2,2-bis(trifluoromethyl)-4-R-thietanes forming as the result of 2 + 2 cycloaddition reaction between hexafluorothioacetone generated “in situ” from dimer 1 and vinyl ether was firmly supported by single crystal X-ray diffraction data, obtained for thietane bearing t-BuO-group.     

Reactions of tetrakis(trifluoromethyl) diphosphine and bis(trifluoromethyl) phosphine with ruthenium carbonyl clusters; X-ray structure of tetraruthenium carbonyl cluster derivatives

Reaction of [Ru₃(CO)₁₂ with (CF₃)₂P---P(CF₃)₂ in p-xylene at 140°C yielded the compounds [Ru₄(CO)₁₃{μ-P(CF₃)₂}₂] (1), [Ru₄(CO)₁₄{μ-P(CF₃)₂}₂] (2) and [Ru₄(CO)₁₁{μ-P(CF₃)₂}₄] (3). Reaction with [(μ-H)₄Ru₄(CO)₁₂] under similar conditions yielded [(μ-H)₃Ru₄(CO)₁₂{μ-P(CF₃)₂}] (4). All four compounds have been characterised by X-ray crystallography. The fluxional behaviour of the hydrides in 4 has also been studied by variable-temperature NMR spectroscopy. Compounds 1, 2 and 4 were also obtained from the reactions of Ru₃(CO)₁₂ with (CF₃)₂PH in dichloromethane at 80°C.     

Study on copolymerization behavior of 2-substituted 4-methylene-1,3-dioxolane with maleic anhydride and acrylonitrile

Copolymerizations of 4-methylene-2-styryl-1,3-dioxolane ( 1 ) and 4-methylene-2-methyl-2-styryl-1,3-dioxolane ( 2 ) with electron-deficient monomers, such as maleic anhydride (MA) and acrylonitrile (AN) were investigated. Only homopolymer of 1 was obtained from the copolymerization of 1 with MA in the presence or absence of AIBN. The copolymerization of 1 and AN with AIBN as initiator gave a copolymer consisting of three kinds of repeating units. Reaction of 2 with MA gave a crystalline product with and without AIBN present. A nine-membered ring structure is proposed for this product based on its IR, UV, proton and ¹³C-NMR spectra, as well as elemental analysis. No polymer was obtained from the copolymerization of 2 and AN with or without AIBN initiator. Based on the structures of the products obtained from the copolymerization, a number of polymerization mechanisms are proposed. © 1996 John Wiley & Sons, Inc.     

First example of regioselective nucleophilic 1,6-addition of trimethyl(trifluoromethyl)silane to 4H-chromene derivatives

Condensation of 2-trifluoromethylchromone with diethyl malonate, ethyl cyanoacetate, and Meldrum’s acid gave the corresponding methylidene derivatives of 2-trifluoromethyl-4H-chromene. Nucleophilic 1,6-addition of an excess of Me₃SiCF₃ in the presence of Me₄NF to those obtained from the former two compounds afforded 4-substituted 2,2-bis(trifluoromethyl)-2H-chromenes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1628–1630, September, 2006.     

Synthesis of new 1,3-bis（phenylethynyl）disilazanes

Three new 1,3-bis(phenylethynyl)disilazanes were synthesized from the reaction of 1,3-dichlorodisilazanes with (phenylethy- nyl)lithium,and characterized by infrared (IR) spectra,nuclear magnetic resonance (NMR) and mass spectrometry (MS).     

Electron ionization-induced fragmentation of some new dibenzo(d, f)(1,3)dioxepine derivatives

The mass spectrometric behaviour of a series of 6,6-disubstituted dibenzo(d,f)(1,3)dioxepine derivatives have been studied. The fragmentation patterns were described and discussed in detail with the aid of labelled compounds, accurate mass measurements and collisionally induced dissociation experiments performed using an ion trap.     

Lithiation of 2-(chloroaryl)-2-methyl-1,3-dioxolanes and application in synthesis of new ortho-functionalized acetophenone derivatives

2-(4-Chlorophenyl)-2-methyl-1,3-dioxolane 2a was lithiated ortho to the ketal group by treatment with butyllithium in THF at 0°C. Related 2-aryl-2-methyl-1,3-dioxolanes possessing a chlorine substituent at the meta position of the aryl group 2b,c were lithiated with butyllithium in THF at −78°C at the position between the two directing groups. The lithio species thus generated were treated with various electrophiles to give ortho-functionalized acetophenone derivatives.     

Acetals and ethers,XVII. One- or two-step syntheses of 2-(2-alkoxyethyl)-1,3-dioxacyclanes

2-(2-Alkoxyethyl)-1,3-dioxanes (1) were prepared by ap-toluenesulfonic acid-catalyzed, one-step reaction of propenal with a mixture of aliphatic alcohol and trimethylene glycol in good yields. The transacetalization reaction of 1,1,3-trialkoxypropanes (3) with ethylene glycol or propylene-(1,2)glycol afforded good yields of pure 2-(2-alkoxyethyl)-1,3-dioxolanes (5 or6), respectively. This reaction proceeds through an intermediate 1,3-dialkoxy-1-(2-hydroxyalkoxy)-propane.

---

Ein- oder Zweistufensynthese von 2-(2-Alkoxyethyl)-1,3-dioxacyclanen

Zusammenfassung In der durchp-Toluolsulfonsäure — katalysierten, direkten Reaktion von Propenal mit einem Gemisch von aliphatischem Alkohol und Trimethylenglykol wurden die entsprechenden 2-(2-Alkoxyethyl)-1,3-dioxane (1) in guten Ausbeuten erhalten. Die Umacetalisierung von 1,1,3-Trialkoxypropanen (3) mit Ethylenglykol oder 1,2-Propylenglykol lieferte 2-(2-Alkoxyethyl)-1,3-dioxolane (5 oder6) in guten Ausbeuten. Die Umacetalisierungsreaktion von 1,1,3-Trialkoxypropanen verläuft über 1,3-Dialkoxy-1-(2-hydroxyalkoxy)-propane als Zwischenprodukte.

     

Heterocyclization of 1,1-dicyano-2-(trifluoromethyl)ethylenes with 1,3,3-trimethyl-3,4-dihydroisoquinoline and its derivatives

1,3,3-Trimethyl-3,4-dihydroisoquinolines react with 1,1-dicyano-2,2-bis(trifluoromethyl)ethylene to give 4-amino-6,6-dimethyl-2,2-bis(trifluoromethyl)-3-cyano-6,7-dihydro-2H-benzo[a]quinolizines. The reaction of 3,3-dimethyl-1-cyanomethylidene-1,2,3,4-tetrahydroisoquinoline and the methyl ester of 3,3-dicyano-2-(trifluoromethyl)acrylic acid leads to 5,5-dimethyl-3-oxo-2-(trifluoromethyl)-2-(dicyanomethyl)-2,3,5,6-tetrahydropyrrolo[2,1-a]isoquinoline.A. N. Nesmeyanov Institute of Heteroorganic Compounds, Russian Academy of Sciences, 117813 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1888–1892, August, 1992.     

Mechanism of the interaction of color reagent 1, 3-N, N'-bis-4-(4'-nitro benzenediazo) phenyl squaraine with oxoacid anions

By AM1 method, the interactions between 1, 3-N, N′-Bis-4-(4′-nitro benzenediazo) phenyl squaraine (BNBPS) and several oxoacid anions have been studied on the basis of the proposed model. The mechanism of the color reactions is suggested and the answers to the question of whether or not BNBPS colorates with HCO_3~-, CO_3~(2-), NO_2~(-), NO_3~-, etc. are given. It is theoretically predicted that BNBPS might be used as the color reagent for SO_4~(2-).     

固载杂多酸催化合成2,4-二甲基-2-(4-甲基-3-戊烯基)-1,3-二氧五环

环缩酮类香料化合物[1 3]是在催化剂存在下由相应的酮和多元醇经缩合反应而制得。已报道的催化剂有质子酸[1]、固体酸[2,3]和某些金属盐类[4～7]等。本文以大孔阳离子交换树脂固载磷钨酸催化6 甲基 5 庚烯 2 酮与1,2 丙二醇的缩合反应,催化剂活性高,且可重复使用,后处理简便。1　实验1 1　仪器和试剂ＷＹＡ 1Ｓ阿贝折光仪;ＰＥ 2400ＣＨＮ元素分析仪;ＰＥ 783红外光谱仪。6 甲基 5 庚烯 2 酮、1,2 丙二醇、钨酸钠、磷酸氢二钠、盐酸等均为分析纯;大孔阳离子交换树脂(Ｄ001 ＣＣ型)。1 2　制备1 2 1　催化剂　以二水钨酸钠和十二水磷酸氢…     

Reactions of polyfluorinated thietanes: Selective synthesis of 4-R-2,2-bis(trifluoromethyl)thietane-1-S-oxides and 2-substituted 5-fluoro-4-(trifluoromethyl)-2,3-dihydrothiophenes

Oxidation of 4-substituted 2,2-bis(trifluoromethyl)thietanes by m-chloroperoxybenzoic acid results in selective formation of the corresponding S-oxides in 65-86% yield. Oxidation of 4-C₂H₅S-2,2-bis(trifluoromethyl)thietane under mild conditions led to selective formation of 4-C₂H₅SO₂-2,2-bis(trifluoromethyl)thietane, which under more rigorous conditions was selectively converted into trans-4-C₂H₅SO₂-2,2-bis(trifluoromethyl)thietane-1-S-oxide. Reaction of 4-substituted 2,2-bis(trifluoromethyl)thietanes with activated aluminum powder results in a highly selective ring expansion process, producing the corresponding 5-fluoro-4-(trifluoromethyl)-2,3-dihydro-2-alkoxythiophenes in 58-93% yield. These compounds were also prepared in 61-85% yield using a “one-pot” procedure, starting from sulfur, hexafluoropropene and the corresponding vinyl ether without isolation of any intermediates. Both 2-i-C₃H₇O- and 2-t-C₄H₉O- 5-fluoro-4-(trifluoromethyl)-2,3-dihydrothiophenes were converted into 2-fluoro-3-trifluormethylthiophene by reaction with P₂O₅.     

Kristall- und Molekülstruktur von Bis(pyridin)bis(trifluoromethyl)zink

Crystal and Molecular Structure of Bis(pyridine)bis(trifluoromethyl)zinc Bis(pyridin)bis(trifluoromethyl)zinc 1 has been isolated and characterized by means of single-crystal X-ray diffraction techniques. The title compound represents the first structure determination of a fully fluorinated alkylzinc compound (monoclinic, space group P2₁/c, Z = 4, a = 8.856(3), b = 18.158(3), c = 8.979(3) Å, β = 98.14(2)°, R = 0.054, R_w = 0.035). The zinc atom is in a distorted tetrahedral environment. The molecular structure of [ClZn(CCl₂CF₃) η₂O]₂ 2 was solved, but is not included in a structural comparison due to crystallographic disorder.