Copper-catalyzed Z-selective semihydrogenation of alkynes with hydrosilane: a convenient approach to cis-alkenes

A copper catalyst generated in situ from widely available copper salt and imidazolium salt in the presence of t-BuOK showed high efficiency for the semihydrogenation of a wide range of internal and terminal alkynes to their corresponding alkenes without obvious over-reduction. Functional groups, such as hydroxyl, nitro, halides, and amino, etc. were tolerated. The Z/E ratios of the obtained alkenes were generally >99%. Finally, semireduction of bulky alkynes also went smoothly.     

Highly stereoselective one-pot procedure to prepare bis- and tris-chalcogenide alkenes via addition of disulfides and diselenides to terminal alkynes

We present here the reaction of diorganoyl dichalcogenides with terminal alkynes under catalyst-free conditions, by a one-pot procedure, to prepare bis- and tris-chalcogenide alkenes selectively, avoiding the previous preparation of chalcogen alkynes. The reaction proceeded cleanly under mild reaction conditions, and the addition of dichalcogenides to alkynes occurred stereoselectively to give exclusively the corresponding Z isomers. We observed that the selectivity control was governed by the effective participation of the hydroxyl group from propargyl alcohols. In addition, the bis-chalcogenide alkenes were exclusively obtained with propargyl alcohol having the acidic hydroxyl group proton. Conversely, the alkynes with no potentially acidic hydroxyl group proton, at propargyl positions, gave exclusively the tris-chalcogenide alkenes.     

Indium(III) chloride-catalyzed oxidative cleavage of carbon-carbon multiple bonds by tert-butyl hydroperoxide in water—a safer alternative to ozonolysis

An efficient and general method for the oxidative cleavage of alkenes and alkynes using tert-butyl hydroperoxide and indium(III) chloride as catalyst in water to give the corresponding carboxylic acids or ketones has been achieved. The reaction conditions are compatible with sensitive moieties such as peptide bonds, tert-butyl carboxylic esters and N-Boc-protected tryptophan. The catalyst could be recycled.     

Synthesis of (Z)-1-bromo-1-alkenes and terminal alkynes from anti-2,3-dibromoalkanoic acids by microwave-induced reaction

(Z)-1-Bromo-1-alkenes were stereoselectively prepared in high yields in a short reaction time by microwave irradiation of the corresponding anti-2,3-dibromoalkanoic acids in a Et₃N/DMF system. A one-pot synthesis of terminal alkynes and enynes from 2,3-dibromoalkanoic acids were also developed by microwave-induced reaction.     

A regioselective Ru-catalyzed alkene-alkyne coupling

[reaction: see text] The reaction of silylalkynes and terminal alkenes proceeds with complete control of regioselectivity by the silyl substituent to give geometrically defined vinylsilanes. Since terminal alkynes normally give mixtures, protodesilylation of these adducts then constitutes a regioselective addition of terminal alkynes to terminal alkenes.     

Rhodium-catalyzed addition of arylboronic acids to alkynyl aza-heteroaromatic compounds in water

Alkynyl heteroaromatic compounds reacted with arylboronic acids to give addition products in the presence of a rhodium catalyst. The best results were obtained when a novel pyridine-substituted water-soluble phosphine ligand was used. The reactions proceed to give trisubstituted alkenes from various arylboronic acids and alkynyl heteroaromatic compounds with high regioselectivity. Only alkynes with a nitrogen atom in proximity to the triple bond were converted to the corresponding alkenes, as expected for a chelation-controlled addition.     

Rh-catalyzed addition of boronic acids to alkynes for the synthesis of trisubstituted alkenes in a biphasic system - Mechanistic study and recycling of the Rh/m-TPPTC catalyst

The versatile preparation of trisubstituted alkenes via selective Rh-catalyzed arylation of alkynes is described in water and in a water/toluene biphasic system. For hydrophobic alkyl alkynes, the reaction afforded either alkenes or dienes depending on the temperature and the solvent conditions. Aryl, heteroaryl, silylated and alkyl substituted alkynes reacted equally well with various boronic acids, leading regioselectively to functionalized alkenyl derivatives in high yields (65-99%). The mechanism was investigated in toluene/water mixture or water and involves a vinylrhodium complex. The efficient recycling of the Rh/m-TPPTC system is disclosed with excellent yield (92-96%) and purity of the alkene.     

Synthesis of trans‐Disubstituted Alkenes by Cobalt‐Catalyzed Reductive Coupling of Terminal Alkynes with Activated Alkenes

A cobalt‐catalyzed reductive coupling of terminal alkynes, RC?CH, with activated alkenes, R′CH?CH₂, in the presence of zinc and water to give functionalized trans‐disubstituted alkenes, RCH?CHCH₂CH₂R′, is described. A variety of aromatic terminal alkynes underwent reductive coupling with activated alkenes including enones, acrylates, acrylonitrile, and vinyl sulfones in the presence of a CoCl₂/P(OMe)₃/Zn catalyst system to afford 1,2‐trans‐disubstituted alkenes with high regio‐ and stereoselectivity. Similarly, aliphatic terminal alkynes also efficiently participated in the coupling reaction with acrylates, enones, and vinyl sulfone, in the presence of the CoCl₂/P(OPh)₃/Zn system providing a mixture of 1,2‐trans‐ and 1,1‐disubstituted functionalized terminal alkene products in high yields. The scope of the reaction was also extended by the coupling of 1,3‐enynes and acetylene gas with alkenes. Furthermore, a phosphine‐free cobalt‐catalyzed reductive coupling of terminal alkynes with enones, affording 1,2‐trans‐disubstituted alkenes as the major products in a high regioisomeric ratio, is demonstrated. In the reactions, less expensive and air‐stable cobalt complexes, a mild reducing agent (Zn) and a simple hydrogen source (water) were used. A possible reaction mechanism involving a cobaltacyclopentene as the key intermediate is proposed.     

Synthesis of trans-Disubstituted Alkenes by Cobalt-Catalyzed Reductive Coupling of Terminal Alkynes with Activated Alkenes

A cobalt-catalyzed reductive coupling of terminal alkynes, RC?CH, with activated alkenes, R'CH?CH(2) , in the presence of zinc and water to give functionalized trans-disubstituted alkenes, RCH?CHCH(2) CH(2) R', is described. A variety of aromatic terminal alkynes underwent reductive coupling with activated alkenes including enones, acrylates, acrylonitrile, and vinyl sulfones in the presence of a CoCl(2) /P(OMe)(3) /Zn catalyst system to afford 1,2-trans-disubstituted alkenes with high regio- and stereoselectivity. Similarly, aliphatic terminal alkynes also efficiently participated in the coupling reaction with acrylates, enones, and vinyl sulfone, in the presence of the CoCl(2) /P(OPh)(3) /Zn system providing a mixture of 1,2-trans- and 1,1-disubstituted functionalized terminal alkene products in high yields. The scope of the reaction was also extended by the coupling of 1,3-enynes and acetylene gas with alkenes. Furthermore, a phosphine-free cobalt-catalyzed reductive coupling of terminal alkynes with enones, affording 1,2-trans-disubstituted alkenes as the major products in a high regioisomeric ratio, is demonstrated. In the reactions, less expensive and air-stable cobalt complexes, a mild reducing agent (Zn) and a simple hydrogen source (water) were used. A possible reaction mechanism involving a cobaltacyclopentene as the key intermediate is proposed.     

Practical synthesis of functionalized terminal alkynes, 3,3,3-triethoxypropyne and ketal protected prop-2-ynones

Practical and economical synthesis of synthetically valuable 3,3,3-triethoxypropyne, ketal protected phenyl and methyl substituents prop-2-ynones is described. Bromination and subsequent 18-crown-6 catalyzed elimination of triethylorthoacrylate and ketal protected terminal alkenes with methyl and phenyl substituent which are inturn readily available from triethylorthopropionate, 3-chlorobutan-2-one and propiophenone afforded multigram quantities (>10?g) of corresponding functionalized terminal alkynes. Exploration of the synthetic utility of these alkynes is also demonstrated by the acetylenic substitution of the phenylalaninol derived 1,2-cyclic sulfamidate to deliver chiral alkynylated amines.     

CuI/glycerol mediated stereoselective synthesis of 1,2-bis-chalcogen alkenes from terminal alkynes: synthesis of new antioxidants

(E)-1,2-Bis-chalcogen alkenes were stereoselectively prepared in good yields by the addition of diorganyl dichalcogenides to terminal alkynes using CuI/Zn/glycerol as a recyclable catalytic system. The antioxidant activity in vitro of four (E)-1,2-bis-chalcogen alkenes synthesized was evaluated and (E)-1,2-bis-(4-methoxyphenylselanyl)styrene 3b presented excellent activity. The catalytic system used in the synthesis was recovered and used directly up to 5 cycles without loss of activity.     

Synthesis of beta,beta-disubstituted vinyl boronates via the ruthenium-catalyzed Alder ene reaction of borylated alkynes and alkenes

Ruthenium-catalyzed Alder ene reactions between borylated alkynes and terminal alkenes give the corresponding beta,beta-disubstituted vinyl boronates with high selectivity for the branched isomer. The stereochemistry of the vinyl boronate moiety was the result of a formal trans addition of the ene subunit across the alkyne, which is the opposite stereochemical outcome observed for other internal alkynes.     

Highly selective hydrogenation of multiple carbon-carbon bonds promoted by nickel(0) nanoparticles

A new method for the highly stereoselective cis semihydrogenation of internal alkynes, semihydrogenation of terminal alkynes, reduction of dienes to alkenes, and reduction of alkynes and alkenes to alkanes is described based on in situ generated both Ni(0) nanoparticles and molecular hydrogen.     

Palladium-Catalysed Couplings of Halofurans with Activated Alkenes and Terminal Alkynes. A Short Synthesis of Dihydrowyerone

The palladium-catalysed coupling of bromofurans with activated alkenes and of furanoyl chlorides with either terminal alkynes or alkynyl stannanes gave good yields of the corresponding vinyl furans and alkynyl ketones. These studies culminated in a short synthesis of the antifungal agent dihydrowyerone.     

Palladium(II) acetate in pyridine as an effective catalyst for highly regioselective hydroselenation of alkynes

A highly regioselective hydroselenation of terminal alkynes with benzeneselenol can be achieved by the combination of palladium acetate and pyridine, providing the corresponding terminal alkenes, (i.e., 2-phenylseleno-1-alkenes) as a sole product. In this hydroselenation, pyridine may act as a suitable ligand for active palladium intermediates.     

Migratory Hydrogenation of Terminal Alkynes by Base/Cobalt Relay Catalysis

Migratory functionalization of alkenes has emerged as a powerful strategy to achieve functionalization at a distal position to the original reactive site on a hydrocarbon chain. However, an analogous protocol for alkyne substrates is yet to be developed. Herein, a base and cobalt relay catalytic process for the selective synthesis of (Z)‐2‐alkenes and conjugated E alkenes by migratory hydrogenation of terminal alkynes is disclosed. Mechanistic studies support a relay catalytic process involving a sequential base‐catalyzed isomerization of terminal alkynes and cobalt‐catalyzed hydrogenation of either 2‐alkynes or conjugated diene intermediates. Notably, this practical non‐noble metal catalytic system enables efficient control of the chemo‐, regio‐, and stereoselectivity of this transformation.     

Hydroarylation of terminal alkynes with arylboronic acids catalyzed by low loadings of palladium

The hydroarylation reaction of terminal alkynes with arylboronic acids catalyzed by low(400 ppm) loadings of palladium has been developed. The reaction is broad in scope and high-yielding, even on multigram scale. It is suitable for the synthesis of alkenes labeled with deuterium, and for the late-stage modification of bioactive molecules.     

A simple, two-step, site-specific preparation of fluorinated naphthalene and phenanthrene derivatives from fluorobromo-substituted alkenes

A facile two-step procedure for the site-specific preparation of fluorinated naphthalene and phenanthrene derivatives is described. The Sonogashira reaction of bromofluoro-substituted alkenes with terminal alkynes, followed by base-catalyzed cyclization in refluxing N-methyl-2-pyrrolidinone (NMP), affords the corresponding fluorinated naphthalene and phenanthrene derivatives in good yields.     

Chemoselective hydrogenation using molecular sieves-supported Pd catalysts: Pd/MS3A and Pd/MS5A

Palladium catalysts embedded on molecular sieves (MS3A and MS5A) were prepared by the adsorption of Pd(OAc)₂ onto molecular sieves with its in situ reduction to Pd⁰ by MeOH as a reducing agent and solvent. 0.5% Pd/MS3A and 0.5% Pd/MS5A catalyzed the hydrogenation of alkynes, alkenes, and azides with a variety of coexisting reducible functionalities, such as nitro group, intact. It is noteworthy that terminal alkenes of styrene derivatives possessing electron-donating functionalities on the benzene nucleus were never hydrogenated under 0.5% Pd/MS5A-catalyzed conditions, while internal alkenes of 1-propenylbenzene derivatives were readily reduced to the corresponding alkanes.     

Isomerization of Secondary Phosphirane into Terminal Phosphinidene Complexes: An Analogy between Monovalent Phosphorus and Transition Metals

Secondary phosphirane complexes isomerize above 100 °C to give the corresponding terminal phosphinidene complexes, which can be trapped by alkenes and alkynes. This reaction is a rare instance of the isomerization of a P^III derivative into a P^I derivative. It appears to mimic the reductive elimination of alkanes from transition‐alkylmetal hydrides.