Gold and platinum catalyzed cascade reaction of propargyl acetates bearing terminal alkynes or methyl ketones

A gold (III)-catalyzed cascade reaction of propargyl acetates bearing an extra terminal alkyne (1) afforded γ-keto esters 3 and lactones 4. These products should be generated through allenyl ketone intermediate B via a 1,2-acyloxy cyclization/fragmentation/cycloisomerization/hydrolysis sequence. On the other hand, the cascade reaction of α-acetoxy ketones bearing terminal alkynes 5 afforded lactone 6 via allenyl ketone intermediate A. This reaction involves a [3,3]-sigmatropic acyloxy rearrangement/cycloisomerization/hydrolysis sequence.     

Understanding the effect of allylic methyls in olefin cross-metathesis

A series of NMR spectroscopy experiments have been conducted with both the model compound, 3-methyl-1-pentene and the corresponding ADMET monomer 3,6,9-trimethylundeca-1,10-diene (11) to better understand the effect of allylic methyls during olefin metathesis chemistry. Traditional ADMET catalysts such as Schrock’s molybdenum (1), and Grubbs’ ruthenium 1st and 2nd generation (2 and 3) were examined under cross-metathesis and ADMET conditions. Regardless of catalyst selection, 50% or less metathesis conversion was observed for all reactions, especially in the case of the more sterically encumbered diene. With Schrock’s molybdenum catalyst 1, the reaction leads to an accumulation of the non-productive metallacyclobutane, trapping the catalyst in an inactive form. With Grubbs’ ruthenium catalysts 2 and 3, the substrate coordinates to the metal center primarily to yield non-productive metathesis, which results in a build-up of the methylidene complex leading to catalyst decomposition. These results are directly correlated to the orientation of the substrate’s bulk during the metallacyclobutane formation, the alkyl branch being adjacent to the metal center in the case of the molybdenum catalyst 1, and opposite to it in the case of ruthenium catalyst 2 and 3.     

A highly efficient olefin metathesis initiator: improved synthesis and reactivity studies

The synthesis of ligand 8, required for the preparation of catalyst 4c has been optimised. Ligand exchange studies indicate that biphenyl-based alkylidene 4c initiates considerably faster than its unsubstituted analogue 4a. The performance of 4c in ring-opening cross metathesis reactions involving substrates containing unprotected chelating atoms is also reported.     

A convergent total synthesis of a new antiepileptic ceramide and its triacetyl derivative using olefin cross metathesis

A convergent total synthesis of a new antiepileptic ceramide 1b and its triacetyl derivative 1b′ was completed by using two important C-C bond forming reactions, Wittig methylenation and olefin cross metathesis as the key steps. The easily available 3,4,6-tri-O-benzyl-d-galactal was used as a chiral pool for the synthesis of highly functionalized amide 3 and the commercially available 1,12-dodecanediol for the long chain olefin counterpart 4. The long hydrocarbon chain of the new ceramide 1b was installed by using olefin cross metathesis between amide 3 and long chain terminal olefin 4 followed by hydrogenation.     

A new stable Hoveyda-Grubbs catalyst with mixed anionic ligands

The synthesis and characterisation of a new highly active Hoveyda-Grubbs 2nd generation type catalyst is described. Substitution of one chloride ligand with a partially fluorinated trialkoxysilyl substituted carboxylate leads to the stable monocarboxylate ruthenium catalyst (3). This catalyst represents the first example of a stable and isolable mono-chloride exchanged carboxylate complex suitable for both homogeneous and heterogeneous metathesis. The reactivity of the new catalyst was tested in representative metathesis reactions and offers an activity comparable to the parent dichloride system (1).     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

A general asymmetric route for the synthesis of the alexine and australine family of pyrrolizidine alkaloids. The first asymmetric synthesis of 1,2-diepi-alexine and 1,2,7-triepi-australine

The first asymmetric synthesis of 1,2-diepi-alexine and 1,2,7-triepi-australine (both are unknown at present) is described, which utilized the regioselective asymmetric aminohydroxylation (RAA) reaction of the achiral olefin VI, the cross metathesis (CM) reaction of the terminal olefin 8, and the formation and subsequent intramolecular double cyclization (DC) reactions of the epoxides 10 and 11. The C1 stereocenter was diastereoselectively introduced by the reaction of the aldehyde 7 with vinylmagnesium bromide.     

Hydrogen-bonding network in new scorpionate-type ligand composed of pyridine/pyrrole hybrid and anion-binding behavior of the corresponding rhodium complexes in alkyne cyclotrimerization reaction

New heteroscorpionate ligands (1 and 2) having a di(pyridin-2-yl)(1H-pyrrol-2-yl)methane substructure are synthesized. X-ray crystallographic analysis on 1 and 2 reveals that they form unique hydrogen bonding networks depending on the size of neighboring groups in solid states. 1 and 2 can form cationic rhodium(I) complexes, wherein the counter anions form hydrogen bondings with the pyrrolic NH moiety. In alkyne cyclotrimerization reactions using those complexes as catalyst, the catalytic activity is significantly enhanced when electron-donating counter anions is placed near the metal center.     

Latent ruthenium olefin metathesis catalysts featuring a phosphine or an N-heterocyclic carbene ligand

The synthesis and characterization of latent 18-electron ruthenium benzylidene complexes (PCy₃)((^κN,O)-picolinate)₂RuCHPh (5) and (H₂IMes)((^κN,O)-picolinate)₂RuCHPh (6) are described. Both complexes appear as two isomers. The ratio between the isomers is dependent on l-type ligand. The complexes are inactive in ring-closing metathesis and ring-opening metathesis polymerization reactions even at elevated temperatures in the absence of stimuli. Upon addition of HCl, complexes 5 and 6 become highly active in olefin metathesis reactions. The advantage of the latent catalysts is demonstrated in the ring-opening metathesis polymerization of dicyclopentadiene, where the latency of 6 assures adequate mixing of catalyst and monomer before initiation. Trapping experiments suggests that the acid converts the 18-electron complexes into their corresponding highly olefin metathesis active 14-electron benzylidenes.     

The second generation synthesis of (+)-pseudodeflectusin

The second generation synthesis of (+)-pseudodeflectusin (1), a potential antitumor agent, has been achieved. The key synthetic step is the cascade reaction involving Diels-Alder reaction, lactonization, and decarboxylation to give cycloadduct 6 with complete regioselectivity in good yield. We found that NaH is the best base to facilitate the Diels-Alder reaction of hydroxypyrone 7 with alkyne 8. The present synthetic route enables the total synthesis of (+)-1 in only five-steps from the known compounds 7 and 8.     

N-terminus to C-terminus metallacyclicpeptides employing tungsten-alkyne coordination

The capacity of using tungsten-alkyne coordination to form metallacyclicpeptides was examined. Dialkynyl species 1, 2 and 3 were prepared. 1 is a dialkyne derivative of ammonia, 2 is a dialkyne derivative of alanine, while 3 is a dialkyne derivative of the dipeptide alanylalanine. In 2 and 3 the two alkyne groups were appended at the N- and C-termini. The N-terminal alkyne was prepared by acylating the N-terminal amine with propargylchloroformate. The C-terminal alkyne was introduced by acylating the C-terminal carboxylic acid with propargylamine. Outcomes of metallacyclization reactions were assessed using ¹H NMR spectroscopy and electrospray positive ion mass spectrometry. Both 2 and 3 underwent successful cyclization to yield the metallacyclicpeptides 16 and 17, respectively. However, 1 did not cyclize; instead, it formed a variety of acyclic and cyclic oligomeric tungsten-bis(alkyne) species. The failure of 1 to cyclize is attributed to its inability to position its two alkyne groups parallel to each other and spaced 6.5 Å apart. The ¹H NMR spectra for 16 and 17 show that these metallacyclicpeptides exist as a complex mixture of isomers that differ in how the ligands are positioned around the tungsten center. At elevated temperatures metallcyclicpeptide 17 will rapidly interconvert between the various isomers. In contrast, 16 does not readily interconvert between isomers, even at elevated temperatures. That 16 does not rapidly interconvert between isomers, even at 90 °C, is attributed to the tight packing and limited conformational freedom of this metallacyclicpeptide.     

Hydroacylation of 2-butyne from the alcohol or aldehyde oxidation level via ruthenium catalyzed C-C bond forming transfer hydrogenation

Under the conditions of ruthenium catalyzed transfer hydrogenation, 2-butyne couples to alcohols 1a-1j to deliver α,β-unsaturated ketones 3a-3j in good to excellent isolated yields with complete E-stereoselectivity. Under identical conditions, aldehydes 2a-2j couple to 2-butyne to provide an identical set of α,β-unsaturated ketones 3a-3j in good to excellent isolated yields with complete E-stereoselectivity. Nonsymmetric alkyne 4a couples to alcohol 1d or aldehyde 2d in good yield to deliver enone 3k as a 5:1 mixture of regioisomers. Thus, intermolecular alkyne hydroacylation is achieved from the alcohol or aldehyde oxidation level. In earlier studies employing the same ruthenium catalyst under slightly different conditions, alkynes were coupled to carbonyl partners from the alcohol or aldehyde oxidation level to furnish allylic alcohols. Therefore, under the conditions of C-C bond forming transfer hydrogenation, all oxidation levels of substrate (alcohol or aldehyde) and product (allylic alcohol or α,β-unsaturated ketone) are accessible.     

Integrating chemosensors for amine-containing compounds into cross-linked dendritic hosts

Trifluoroacetylazo dye 1, a known chemosensor for amines, has been integrated into cross-linked dendrimer hosts. Thus, boronic acid 16 was linked to iododye 9 via a Suzuki coupling reaction. In situ deprotection and alkylation with dendrons 3 and 4, containing 8 homoallyl or allyl ether groups, respectively, afforded dendrons 18 and 19 with chemosensor units at their focal point. Conversion of 18 (19) to the bis-imine of butane 1,4-diamine, extensive cross-linking via the ring closing metathesis reaction with Grubbs catalyst 25, and hydrolysis produced dendrimer hosts 28 and 29. Host-guest studies with a small library of amines and alcohols showed 28 and 29 to selectively signal certain diamines but not due to template mediated imprinting.     

Ring-opening metathesis polymerization with [2+2]-crosslinking to create new materials

There are almost no examples of Grubbs’-type ring-opening metathesis polymers that have been [2+2]-crosslinked. Two new monomers, 6 and 10, were used to construct two novel linear soluble polymers 7 and 11, bearing photochemically labile moieties for [2+2]-cycloaddition reactions. These soft polymers were photocrosslinked into very hard polymers, 8 and 12. Potential advantages of these new bioinspired materials include: (1) ready processing into flat, round, and cylindrical shapes; (2) reasonably low toxicity due to trace amounts of catalyst needed; and (3) rapid rate of polymerization and crosslinking that avoids acids and bases.     

Preparation of some angularly substituted and highly functionalized quinolizidines as building blocks for the synthesis of various alkaloids and related scaffolds of medicinal interest

The epimeric forms of the angularly substituted quinolizidine 6, representing potentially useful building blocks for the synthesis of various alkaloids, have been prepared via a pathway involving two consecutive ring-closing metathesis reactions. Variously hydroxy-protected derivatives (21, 22, and 26-29) of these compounds have also been generated.     

Synthesis of covalently bonded nanostructure from two porphyrin molecular wires leading to a molecular tube

Molecular wire, diacetylene-linked porphyrin dimer 6 having terminal alkenes, was synthesized. Porphyrin dimer 6 formed the 1:1 double-stranded ladder complex with 1,4-diazabicyclo[2.2.2]octane (DABCO). The co-planar stacked two porphyrin molecular wires in the ladder complex were connected by olefin metathesis in the presence of the Grubbs catalyst in order to make a covalently bonded tubular nanostructure. The obtained molecular tube 7 was characterized by ¹H, ¹³C NMR spectroscopy, and MALDI-TOF MS spectrometry.     

Photoinduced cycloadditions of N-methyl-1,8-naphthalenedicarboximides with alkynes

Photoinduced cycloadditions of N-methyl-1,8-naphthalenedicarboximide 1 with phenylacetylenes 2a-2c, cyclopropylacetylene 2d, diphenylacetylenes 2e-2f and 1-phenylpropyne 2g were investigated. In the case of phenylacetylenes 2a, 2b and cyclopropylacetylene 2c, photoreaction with 1 takes place at the naphthalene C(1)C(2) bond to give the cyclobutene products. For 4-methoxyphenylacetylene 1c, the cyclobutene 3c is obtained together with the 4-benzo[a]thebenidinone 4c derived from a primary oxetene product formed by [2+2] addition of the imide carbonyl with the alkyne. Similar to 2c, photocycloaddition of 1 with 2e and 2f gave the cyclobutenes 7e, 7f, 8f and the 4-benzo[a]thebenidinone products 9e, 9f and 10f, respectively, derived from the corresponding oxetenes. Photoreaction of 1 with 2g gave cyclobutene 7g and benzo[a]thebenidinone 9g. Sensitization experiment and internal heavy atom effect study showed that these reactions proceed from the ππ* singlet excited state of 1. Estimation of the free energy change for electron transfer between ¹1* and the alkynes and the calculation of charge and spin density distribution in the anion radical of 1 and the cation radical of the alkynes suggested that the cyclobutene products are formed by direct [2+2] cycloaddition of ¹1* with the alkyne, while the formation of the oxetene products is the result of electron transfer interaction between ¹1* and the alkyne. The regioselectivity in the oxetene formation is accounted for by charge and spin density distribution in the anion radical of 1 and the cation radical of the alkyne.     

New reactivity patterns of copper(I) and other transition metal NHC complexes: application to ATRC and related reactions

Pre-formed transition metal-NHC complex is shown to be an effective catalyst for Atom Transfer Radical Cyclisation (ATRC) reactions.     

Studies directed towards the stereoselective total synthesis of ilexlactone via a tandem ring-closing enyne metathesis protocol

Studies directed towards the stereoselective total synthesis of ilexlactone resulted in the synthesis of bicyclic systems 1a, 1b and ent-1a through tandem ring-closing enyne metathesis using Grubbs’ catalyst. The structures of synthetic 1a, 1b and ent-1a revealed that the proposed structure for ilexlactone is incorrect.     

Domino intramolecular enyne metathesis/cross metathesis approach to the xanthanolides. Enantioselective synthesis of (+)-8-epi-xanthatin

The first total synthesis of (+)-8-epi-xanthatin (1) has been achieved in 14 steps starting from the commercially available ester 24, which was converted into aldehyde 23 in six steps. An enantioselective aldol reaction of 23 gave 30, which was transformed into triflate 22 in four steps, setting the stage for a palladium-catalyzed carbonylation reaction to form acrylate 34. Compound 34 was then subjected to a deprotection/lactonization sequence to furnish enyne 21, which underwent a domino enyne ring-closing metathesis/cross metathesis process to form a seven-membered carbocycle and (E)-conjugated dienone, thereby completing the synthesis of 1. This domino ruthenium-catalyzed metathesis reaction thus serves as an efficient method to construct the core of xanthanolide and other sesquiterpene lactones.