Scope and limitations of Pd2(dba)3/P(i-BuNCH2CH2)3N-catalyzed Buchwald-Hartwig amination reactions of aryl chlorides

Proazaphosphatrane ligands in combination with Pd(2)(dba)(3) generate highly active catalysts for Buchwald-Hartwig amination of aryl chlorides. In particular, commercially available P(i-BuNCH(2)CH(2))(3)N is a highly general and efficient ligand, allowing the coupling of an electronically diverse set of aryl chlorides, including chloropyridines, with a wide variety of amines using 1 mol % of Pd at 100 degrees C. Either a 1:1 or 2:1 ratio of ligand to Pd was found to be effective. This catalyst system performs exceptionally well for sterically hindered substrates, even with only 0.25 mol % of Pd. It is shown that NaOH can also be used as the base (instead of NaO-t-Bu) allowing functionalized substrates to participate in these reactions.     

Highly enantioselective borane reduction of heteroaryl and heterocyclic ketoxime ethers catalyzed by novel spiroborate ester derived from diphenylvalinol: application to the synthesis of nicotine analogues

An asymmetric synthesis for the preparation of nonracemic amines bearing heterocyclic and heteroaromatic rings is described. A variety of important enantiopure thionyl and arylalkyl primary amines were afforded by the borane-mediated enantioselective reduction of O-benzyl ketoximes using 10% of catalyst 10 derived from ( S)-diphenylvalinol and ethylene glycol with excellent enantioselectivity, in up to 99% ee. The optimal condition for the first asymmetric reduction of 3- and 4-pyridyl-derived O-benzyl ketoxime ethers was achieved using 30% of catalytic loading in dioxane at 10 degrees C. ( S)- N-ethylnornicotine ( 3) was also successfully synthesized from the TIPS-protected ( S)-2-amino-2-pyridylethanol in 97% ee.     

Effects of amine nature and nonleaving group substituents on rate and mechanism in aminolyses of 2,4-dinitrophenyl X-substituted benzoates

Second-order rate constants have been measured for the reactions of 2,4-dinitrophenyl X-substituted benzoates (1a-f) with a series of primary amines in 80 mol % H(2)O/20 mol % DMSO at 25.0 +/- 0.1 degrees C. The Br?nsted-type plot for the reactions of 1d with primary amines is biphasic with slopes beta(1) = 0.36 at the high pK(a) region and beta(2) = 0.78 at the low pK(a) region and the curvature center at pK(a) degrees = 9.2, indicating that the reaction proceeds through an addition intermediate with a change in the rate-determining step as the basicity of amines increases. The corresponding Br?nsted-type plot for the reactions with secondary amines is also biphasic with beta(1) = 0.34, beta(2) = 0.74, and pK(a) degrees = 9.1, indicating that the effect of amine nature on the reaction mechanism and pK(a) degrees is insignificant. However, primary amines have been found to be less reactive than isobasic secondary amines. The microscopic rate constants associated with the aminolysis have revealed that the smaller k(1) for the reactions with primary amines is fully responsible for their lower reactivity. The electron-donating substituent in the nonleaving group exhibits a negative deviation from the Hammett plots for the reactions of 1a-f with primary and secondary amines, while the corresponding Yukawa-Tsuno plots are linear. The negative deviation has been ascribed to stabilization of the ground state of the substrate through resonance interaction between the electron-donating substituent and the carbonyl functionality.     

P(MeNCH2CH2)3N: an efficient catalyst for the desilylation of tert-butyldimethylsilyl ethers

tert-Butyldimethylsilyl (TBDMS) ethers of primary, secondary, and tertiary alcohols and phenolic TBDMS ethers are desilylated to their corresponding alcohols and phenols, respectively, in DMSO, at 80 degrees C, in 68-94% yield in the presence of 0.2-0.4 equiv of P(MeNCH2CH2)3N. Using P(i-PrNCH2-CH2)3N as the catalyst, 85-97% yields of desilylated alcohols were obtained from TBDMS ethers of 1-octanol, 2-phenoxyethanol, and racemic alpha-phenyl ethanol. These are the first examples of desilylations of silyl ethers catalyzed by nonionic bases. Both catalysts were much less effective for the desilylation of tert-butyldiphenylsilyl (TBDPS) ethers (22-45% yield) under the same conditions as used for TBDMS ethers. Possible pathways involving nucleophilic attack of the anion of the solvent molecule (generated by the catalyst) at the Si-O bond of silyl ether or a prior activation of the silyl ether by the catalyst via a P-Si interaction followed by nucleophilic attack of the solvent anion are proposed on the basis of 1H and 31P NMR experimental data.     

Synthesis of allenes via palladium-catalyzed hydrogen-transfer reactions: propargylic amines as an allenyl anion equivalent

Synthesis of allenes has been achieved by using palladium-catalyzed hydrogen-transfer reactions. Various propargylic amines, which were readily prepapred from iodobenzenes and propargylic amines by Sonogashira coupling reaction, underwent the hydrogen-transfer reaction in the presence of Pd2dba3.CHCl3/(C6F5)3P catalyst at 100 degrees C in dioxane for 24 h, giving the corresponding allenes in 43-99% yields. Various propargylic alcohols containing a propargylic aminomethyl group, synthesized by the addition of lithium acetylides of N,N-diisopropylprop-2-ynylamine to aldehydes and a ketone, also underwent the hydrogen-transfer reaction in the presence of Pd2dba3.CHCl3 catalyst and (C6F5)3P at 80 degrees C in dioxane, giving the corresponding allenes in 56-92% yields. In the current transformation, propargylic amines can be handled as an allenyl anion equivalent and introduced into various electrophiles to be transformed into allenes under palladium-catalyzed conditions.     

Utilisation de techniques d'amination réductrice pour la synthèse d'amino-sucres de différents types. Communication préliminaire

Synthesis of amino-sugars using reductive amination reactions. Preliminary communication Treatment of aldehydo- or keto-sugars with primary or secondary amines and hydrogen in the presence of a catalyst (Pd/C) gave with good to excellent yields (67–96%) the expected secondary or tertiary amines. Primary amines can be obtained by using benzylamine, a hydrogenolysis taking place during the reaction.     

Insights into the oxidation and decomposition of CO on Au/alpha-Fe2O3 and on alpha-Fe2O3 by coupled TG-FTIR

CO oxidation and decomposition behaviors over nanosized 3% Au/alpha-Fe2O3 catalyst and over the alpha-Fe2O3 support were studied in situ via thermogravimetry coupled to on-line FTIR spectroscopy (TG-FTIR), which was used to obtain temperature-programmed reduction (TPR) curves and evolved gas analysis. The catalyst was prepared by a sonication-assisted Au colloid based method and had a Au particle size in the range of 2-5 nm. Carburization studies of H 2-prereduced samples were also made in CO gas. According to gravimetry, for the 3% Au/alpha-Fe2O3 catalyst, there were three distinct stages of CO interaction with the Au catalyst but only two stages for the catalyst support. At low temperatures (相似文献   

Non-nanogold catalyzed aerobic oxidation of secondary amines to imines

Bulk gold powder (approximately 10(3) nm particle size) is a highly active catalyst for the oxidative dehydrogenation of secondary amines to imines under the mild conditions of 1 atm O2 and 60-100 degrees C.     

The effect of medium on rate and mechanism: aminolysis of O-4-nitrophenyl thionobenzoate in MeCN and H2O

Pseudo-first-order rate constants (kobs) have been measured spectrophotometrically for reactions of O-4-nitrophenyl thionobenzoate (1) with a series of alicyclic secondary amines in MeCN and H2O at 25.0 +/- 0.1 degrees C. The plot of kobs vs amine concentration exhibits an upward curvature in all cases, indicating that the reactions proceed through two tetrahedral intermediates (a zwitterionic T(+/-) and its deprotonated anionic T-) regardless of the amine basicity and the nature of the reaction medium. However, all the amines investigated have been found to be much less reactive in MeCN than in H2O, although the amines are more basic in the former medium by 7-9 pKa units.     

Restructuring and redispersion of silver on SiO2 under oxidizing/reducing atmospheres and its activity toward CO oxidation

The effects of oxygen-hydrogen pretreatments of nanosilver catalysts in cycle mode on the structure and particle size of silver particles, and subsequently the activity of the catalyst toward CO oxidation (or CO selective oxidation in the presence of H2), are reported in this paper. Ag/SiO2 catalyst with silver particle sizes of ca. 6 approximately 8 nm shows relatively high activity in the present reaction system. The adopting of a cycle of oxidation/reduction pretreatment has a marked influence on the activity of the catalyst. Oxygen pretreatment at 500 degrees C results in the formation of subsurface oxygen and activates the catalyst. As evidenced by in-situ XRD and TEM, the following H2 treatment at low temperatures (100 approximately 300 degrees C) causes surface faceting and redispersing of the silver particles without destroying the subsurface oxygen species. The subsequent in-situ FTIR and catalytic reaction results show that CO oxidation occurs at -75 degrees C and complete CO conversion can be obtained at 40 degrees C over such a nanosilver catalyst pretreated with oxygen at 500 degrees C followed by H2 at 100 degrees C. However, prolonged hydrogen treatment at high temperatures (>300 degrees C) after oxygen pretreatment at 500 degrees C induces the aggregation of silver particles and also depletes so much subsurface oxygen species that the pathway of CO oxidation by the subsurface oxygen species is inhibited. Meanwhile, the ability of the catalyst to adsorb reactants is greatly depressed, resulting in a 20 approximately 30% decrease in the activity toward CO oxidation. However, the activity of the catalyst pretreated with oxygen at 500 degrees C followed by hydrogen treatment at high temperatures (>300 degrees C) is still higher than that directly pretreated with H2. This kind of catalytic behavior of silver catalyst is associated with physical changes in the silver crystallites because of surface restructuring and crystallite redispersion during the course of oxygen-hydrogen pretreatment steps.     

Catalytic reductive alkylation of secondary amine with aldehyde and silane by an iridium compound

[reaction: see text] An efficient methodology for the reductive alkylation of secondary amine with aldehyde and Et(3)SiH using an iridium complex as a catalyst has been developed. For example, treatment of dibutylamine with butyraldehyde and Et(3)SiH (a 1:1:1 molar amount of amine, aldehyde, and silane) in 1,4-dioxane at 75 degrees C under the influence of a catalytic amount of [IrCl(cod)](2) gave tributylamine in quantitative yield. In this reaction, no reduction of aldehyde took place. It was found that IrCl(3), which is a starting material for preparation of iridium complexes such as [IrCl(cod)](2), acts as an efficient catalyst for the present reductive alkylation of amine. In addition, a cheaper, easy-to-handle, and environmentally friendly reducing reagent such as polymethylhydrosiloxane (PMHS) in place of Et(3)SiH was also useful. Thus, a variety of secondary amines could be alkylated by allowing them to react with aldehydes and PMHS in the presence of an iridium catalyst to afford the corresponding tertiary amines in good to excellent yields. From the deuterium label experiments, it was revealed that silane and water, generated during the formation of enamine by the reaction of amine and aldehyde, seem to behave as a hydrogen source. The catalytic cycle was discussed.     

Synthesis of o-sulfamidotriazobenzenes from 1,1'-sulfonylbis(benzotriazole)

Easily accessible 1,1'-sulfonylbis(benzotriazole) (Bt2SO2, 1) reacts with secondary amines at room temperature to afford (i) the corresponding o-sulfamidotriazobenzenes 2a-d (53-75%) via concurrent substitution of the first and ring opening of the second benzotriazolyl group and (ii) N-sulfonylbenzotriazoles 3b,c,e,f (7-73%). 1-(Morpholine-4-sulfonyl)-1H-benzotriazole 3c reacts with piperidine, pyrolidine, and N-methylpiperazine under microwave irradiation (120 W) at 120 degrees C for 10 min to give the unsymmetrical sulfamides 4a-c (80-90%).     

Iridium-catalyzed reduction of secondary amides to secondary amines and imines by diethylsilane

Catalytic reduction of secondary amides to imines and secondary amines has been achieved using readily available iridium catalysts such as [Ir(COE)(2)Cl](2) with diethylsilane as reductant. The stepwise reduction to secondary amine proceeds through an imine intermediate that can be isolated when only 2 equiv of silane is used. This system requires low catalyst loading and shows high efficiency (up to 1000 turnovers at room temperature with 99% conversion have been attained) and an appreciable level of functional group tolerance.     

Simple, efficient catalyst system for the palladium-catalyzed amination of aryl chlorides, bromides, and triflates

Palladium complexes supported by (o-biphenyl)P(t-Bu)(2) (3) or (o-biphenyl)PCy(2) (4) are efficient catalysts for the catalytic amination of a wide variety of aryl halides and triflates. Use of ligand 3 allows for the room-temperature catalytic amination of many aryl chloride, bromide, and triflate substrates, while ligand 4 is effective for the amination of functionalized substrates or reactions of acyclic secondary amines. The catalysts perform well for a large number of different substrate combinations at 80-110 degrees C, including chloropyridines and functionalized aryl halides and triflates using 0.5-1.0 mol % Pd; some reactions proceed efficiently at low catalyst levels (0.05 mol % Pd). These ligands are effective for almost all substrate combinations that have been previously reported with various other ligands, and they represent the most generally effective catalyst system reported to date. Ligands 3 and 4 are air-stable, crystalline solids that are commercially available. Their effectiveness is believed to be due to a combination of steric and electronic properties that promote oxidative addition, Pd-N bond formation, and reductive elimination.     

Enantioselective synthesis of cyclic secondary amines through Mo-catalyzed asymmetric ring-closing metathesis (ARCM)

Carbocyclic amines are synthesized efficiently in up to 93% ee by asymmetric ring-closing metathesis (ARCM) with 2-5 mol % chiral Mo complexes. An example is provided where the catalyst is prepared in situ (catalyst isolation not needed) to afford secondary amines that cannot be prepared by alternative methods. [reaction: see text]     

Palladium-catalyzed synthesis of 2-(aminomethyl)indoles from ethyl 3-(o-trifluoroacetamidophenyl)-1-propargyl carbonate

[reaction: see text] The palladium-catalyzed reaction of ethyl 3-(o-trifluoroacetamidophenyl)-1-propargyl carbonate with piperazines in the presence of Pd(PPh(3))(4) in THF at 80 degrees C affords 2-(piperazin-1-ylmethyl)indoles in excellent yields. Good to excellent yields are also obtained with other secondary amines.     

WO3/CeO2-ZrO2, a promising catalyst for selective catalytic reduction (SCR) of NOx with NH3 in diesel exhaust

A WO3/CeO2-ZrO2 catalyst system was discovered for selective catalytic reduction of NOx with NH3; the catalyst (10 wt% WO3 loading) showed nearly 100% NOx conversion in a temperature range of 200-500 degrees C, at a space velocity of 90 000 h(-1) in a simulated diesel exhaust containing 550 ppm NOx (NO : NO2 feed ratio at 1.0), 10 vol% H2O and 10 vol% CO2; the catalyst also exhibited high temperature stability.     

丹酰氯柱前衍生仲胺的高效液相色谱-电化学检测方法的研究

立了一种灵敏检测仲胺的新方法。首次以丹酰氯作为仲胺的电化学检测衍生试剂,对分离检测条件、仲胺的衍生条件及电化学定量检测条件作了详细的研究。以甲醇－２０ｍｍｏｌ／Ｌ的邻苯二甲酸氢钾缓冲液（７０∶３０,ｐＨ３．３）为淋洗液,采用安培检测器在Ｅ＝＋１．１Ｖ电压条件下,在ＰＥＲＫＩＮ－ＥＬＭＥＲ／ＨＳ－３Ｃ１８（８３ｍｍ×４．６ｍｍｉ．ｄ．,３μｍ）柱上实现了二甲胺、二乙胺和哌啶的良好反相分离和灵敏检测,线性范围超过两个数量级。二甲胺、二乙胺和哌啶的检出限分别为０．０２４,０．６０,０．０９０ｐｇ。     

Catalyst-free microwave-assisted amination of 2-chloro-5-nitrobenzoic acid

The synthesis of N-substituted 5-nitroanthranilic acid derivatives 3a-w was achieved by a new, mild, microwave-assisted, regioselective amination reaction of 5-nitro-2-chlorobenzoic acid (1a) with a diverse range of aliphatic and aromatic amines 2a-w without added solvent or catalyst. Up to >99% isolated yield was obtained within 5-30 min at 80-120 degrees C. The reaction, which is suitable for upscaling, yielded new compounds that are of considerable interest as useful building blocks and as potential drugs.     

In situ X-ray diffraction and solid-state NMR study of the fluorination of gamma-Al(2)O(3) with HCF(2)Cl.

In situ X-ray diffraction (XRD) and NMR methods were used to follow the structural changes that occur during the dismutation reaction of hydrochlorofluorocarbon-22 (CHClF(2)) over gamma-alumina. Use of a flow cell allowed diffraction patterns to be recorded, while the reaction products were simultaneously monitored downstream of the catalyst bed, by gas chromatography. No visible structural changes of gamma-Al(2)O(3) were observed at 300 degrees C, the temperature at which this material becomes active for catalysis. A new phase began to form at 360 degrees C, which by 500 degrees C completely dominated the XRD powder pattern. (19)F/(27)Al cross-polarization (CP) experiments of gamma-Al(2)O(3) activated at 300 degrees C showed that AlF(3) had already begun to form at this temperature. By 400 degrees C, resonances from a phase that resembles alpha-AlF(3) dominate both the (19)F and (27)Al NMR spectra of the used catalyst. In situ XRD experiments of the catalytically inactive alpha-AlF(3) phase were performed to investigate the structural changes of this material, associated with the extent of tilting of the AlF(6) octahedra in this ReO(3)-related structure, as a function of temperature. Structural refinements of this sample, and the catalytically active phase that grows over gamma-Al(2)O(3), demonstrate that the catalyst is structurally similar to the rhombohedral form of alpha-AlF(3). Differences between the two phases are ascribed to defects in the catalyst, which limit the flexibility of the structure; these may also be responsible for the differences in the catalytic behavior of the two materials.