Prediction of 3-hydroxypyridin-4-one (HPO) log K(1) values for Fe(iii)

As a means to aid in the design of 3-hydroxypyridin-4-ones (HPOs) intended for use as therapeutic Fe(3+) chelating agents, a novel methodology has been developed using quantum mechanical (QM) calculations for predicting the iron binding affinities of the compounds (more specifically, their log K(1) values). The reported/measured HPO log K(1) values were verified through their correlation with the corresponding sum of the compounds' ligating group pK(a) values. Using a training set of eleven HPOs with known log K(1) values, reliable predictions are shown to be obtained with QM calculations using the B3LYP/6-31+G(d)/CPCM model chemistry (with Bondi radii, and water as solvent). With this methodology, the observed log K(1) values for the training set compounds are closely matched by the predicted values, with the correlation between the observed and predicted values giving r(2) = 0.9. Predictions subsequently made by this method for a test set of 42 HPOs of known log K(1) values gave predicted values accurate to within ±0.32 log units. In order to further investigate the predictive power of the method, four novel HPOs were synthesised and their log K(1) values were determined experimentally. Comparison of these predicted log K(1) values against the measured values gave absolute deviations of 0.22 (13.87 vs. 14.09), 0.02 (14.31 vs. 14.29), 0.12 (14.62 vs. 14.50), and 0.13 (15.04 vs. 15.17). The prediction methodology reported here is the first to be provided for predicting the absolute log K(1) values of iron-chelating agents in the absence of pK(a) values.     

Design and characterisation of novel hexadentate 3-hydroxypyridin-4-one ligands

Two novel hexadentate 3-hydroxypyridin-4-one ligands have been designed and synthesised. The physico-chemical properties of one of the hexadentate ligands have been determined and the results indicate that the hexadentate ligand possesses high affinity for iron(III).     

Prediction of 3-hydroxypyridin-4-one (HPO) hydroxyl pKa values

As an aid in optimising the design of 3-hydroxypyridin-4-ones (HPOs) intended for use as therapeutic Fe(3+) chelating agents, various quantum mechanical (QM) and semi-empirical (QSAR) methods have been explored for predicting the pK(a) values of the hydroxyl groups in these compounds. Using a training set of 15 HPOs with known hydroxyl pK(a) values, reliable predictions are shown to be obtained with QM calculations using the B3LYP/6-31+G(d)/CPCM model chemistry (with Pauling radii, and water as solvent). With this methodology, the observed hydroxyl pK(a) values for the training set compound are closely matched by the predicted pK(a) values, with the correlation between the observed and predicted values giving r(2) = 0.98. Predictions subsequently made by this method for a test set of 48 HPOs of known hydroxyl pK(a) values (11 of which were determined experimentally in this study), gave predicted pK(a) values accurate to within ±0.2 log units. In order to further investigate the predictive power of the method, two novel HPOs were synthesised and their hydroxyl pK(a) values were determined experimentally. Comparison of these predicted pK(a) values against the measured values gave absolute deviations of 0.13 (10.18 vs. 10.31) and 0.43 (5.58 vs. 5.15).     

Luminescense properties of new complexes of Eu(III) and Tb(III) with heterotopic ligands

As a result of coordination between ligands L and L' and europium(III) and terbium(III) ions, the new architectures were formed. The formulae of the complexes have been assigned on the basis of the spectroscopic data in solution and microanalyses. The europium complexes show excellent luminescence properties with high quantum yield (1b-Eu(3)L(2)) and effective intramolecular energy transfer from the ligand to the Eu(III) ions.     

Lanthanide compounds with fluorinated OC6F5 ligands: homo- and heterovalent complexes of Eu(II) and Eu(III)

The fluorinated phenoxide OC6F5 forms the stable Eu(II) and Eu(III) derivatives (DME)2Eu(mu-OC6F5)3Eu(mu-OC6F5)3Eu(DME)2 and (DME)2Eu(OC6F5)3, as well as the heterovalent product (DME)2Eu(mu-OC6F5)3Eu(DME)(OC6F5)2, in redox reactions of Eu with HOC6F5 or in proton-transfer reactions of HOC6F5 with Eu(SPh)2. The divalent complex crystallizes as a trimer with three bridging phenoxides bridging each pair of metals, with the terminal metals coordinating DME and the central metal ion encapsulated totally by O(C6F5) and dative fluoride interactions. The trivalent compound is monomeric with terminal phenoxide ligands and no Eu-F interactions. The heterovalent compound has clearly localized metal valence states and coordination features that mimic the homovalent species with the terminal OC6F5 bound to the Eu(III) ion, three bridging OR ligands spanning the Eu(II) and Eu(III) ions, and dative Eu(II)-F bonds. At elevated temperatures, these compounds decompose to give a mixture of solid-state fluoride phases.     

Density functional study on Am(III)/Eu(III) selectivity using crown ether type ligands

Journal of Radioanalytical and Nuclear Chemistry - Density functional theory calculations were applied to understand the selectivity between Am3+ and Eu3+ ions with the crown ethers type ligands....     

Enhanced lasing properties of dissymmetric Eu(III) complex with bidentate phosphine ligands

The luminescent and lasing properties of Eu(III) complexes were enhanced by using an dissymmetric Eu(III) complex. The photophysical properties (the emission spectral shapes, the emission lifetimes, the emission quantum yields, and the stimulated emission cross section (SEC)) were found to be dependent on the geometrical structures of Eu(III) complexes. The geometrical structures of Eu(III) complexes were determined by X-ray single crystal analyses. The symmetrical group of Eu(hfa)3(BIPHEPO) (tris(hexafluoroacetylacetonato)europium(III) 1,1'-biphenyl-2,2'-diylbis(diphenylphosphine oxide)) was found to be C1, which was more dissymmetric than Eu(hfa)3(TPPO)2 (tris(hexafluoroacetylacetonato)europium(III) 1,2-phenylenebis(diphenylphosphine oxide): C2 symmetry) and Eu(hfa)3(OPPO)2 (tris(hexafluoroacetylacetonato)europium(III) 1,2-phenylenebis(diphenylphosphine oxide): C2 symmetry). The analytical data were supported by Judd-Ofelt analysis. The most dissymmetrical Eu(III) complex, Eu(hfa)3(BIPHEPO), showed large electron transition probability and large SEC (4.64 x 10(-20) cm2). The SEC of Eu(hfa)3(BIPHEPO) was superior to even the values of Nd-glass laser for practical use (1.6-4.5 x 10(-20) cm2). The lasing properties of Eu(III) complexes in polymer thin film were measured by photopumping of a Nd:YAG laser (355 nm). The threshold energy of lasing oscillation was found to be 0.05 mJ. The increasing rate of the lasing intensity of Eu(hfa)3(BIPHEPO) as a function of the excitation energy was much larger than that of Eu(hfa)3(TPPO)2 and Eu(hfa)3(OPPO)2. The dissymmetrical structure of Eu(hfa)3(BIPHEPO) promoted the enhancement of the lasing property.     

Density functional theory insight into Eu(III) and Am(III) complexes with two 2,6-dicarboxypyridine diamide-type ligands

Extraction complexes of Eu(III) and Am(III) with two 2,6-dicarboxypyridine diamide-type ligands L–A and L–B (Fig. 1) are studied by density functional theory (DFT). At both B3LYP/6-31G(d)/RECP and MP2/6-31G(d)/RECP levels of theory, the geometrical optimizations of the structures of the complexes can achieve the same accuracy and obtain the same geometrical configuration. At the B3LYP/6-311G(d,p)/RECP level of theory Eu³⁺ and Am³⁺ prefer to form [ML]³⁺ complexes under the solvation conditions, and the Am(III) complexes with L–A are more stable than the corresponding Eu(III) complexes. In the system with the ligand L–B, both [ML]³⁺ and [ML(NO₃)₃] species are very unstable.     

Direct access to terpyridine-containing polyazamacrocycles as photosensitizing ligands for Eu(III) luminescence in aqueous media

[reaction: see text] The synthesis of new 18-membered hexaazamacrocycles containing a functionalized 2,2':6',2' '-terpyridine moiety as part of the cyclic backbone and three acetate pendant arms is described. The reported synthetic procedure is based on the use of an efficient metal template ion effect which controls the macrocyclization step. This procedure is compatible with some functional groups present in the macrocyclic structure. The photophysical properties of the Eu(III) complexes derived from these ligands were examined in aqueous solutions. Their luminescence lifetimes (tau approximately 1 ms) and quantum yields (13% < Phi < 18%) on one hand, their high kinetic inertness on the other hand, and the presence of additional functionality allowing their covalent conjugation to biomolecules seriously nominate these complexes as very promising candidates for luminescent labeling of biological materials.     

Polarographic study of Eu(III)-succinate-ethylenediamine and Eu(III)-malonate-ethylenediamine mixed systems

The mixed complexes of Eu(III) with succinate (succ^2?) and malonate (mal^2?) and ethylenediamine (en) have been studied polarographically at 25°C and at constant ionic strength, μ = 0.1 (NaNO₃) and pH 6. The reduction of the complexes in each case is quasi-reversible and diffusion-controlled. In each system three mixed complexes are formed, viz. [Eu(succ)(en)]⁺, [Eu(succ)(en)2]⁺ and [Eu(succ)₂(en)]^? with stability constants log β₁₁ = 9.2, log β₁₂ = 17.5 and log β₂₁ = 11.7; and [Eu(mal)(en)]⁺, [Eu(mal)₂(en)₂]^? and [Eu(mal)₃(en)]^3? with stability constants log β₁₁ = 11.4, log β₂₂ = 19.08 and log β₃₁ = 13.5 respectively.     

Lanthanide directed self-assembly formations of Tb(III) and Eu(III) luminescent complexes from tryptophan based pyridyl amide ligands

The formation of self-assembly complexes between the ligands 1 (SS) and 2 (RR) and terbium or europium was undertaken and shown (using various spectroscopic titrations) to give rise to the exclusive formation of 2:1 (L:Ln) stoichiometry and not the anticipated 3:1 stoichiometry.     

Sparkle model for the calculation of lanthanide complexes: AM1 parameters for Eu(III), Gd(III), and Tb(III)

Our previously defined Sparkle model (Inorg. Chem. 2004, 43, 2346) has been reparameterized for Eu(III) as well as newly parameterized for Gd(III) and Tb(III). The parameterizations have been carried out in a much more extensive manner, aimed at producing a new, more accurate model called Sparkle/AM1, mainly for the vast majority of all Eu(III), Gd(III), and Tb(III) complexes, which possess oxygen or nitrogen as coordinating atoms. All such complexes, which comprise 80% of all geometries present in the Cambridge Structural Database for each of the three ions, were classified into seven groups. These were regarded as a "basis" of chemical ambiance around a lanthanide, which could span the various types of ligand environments the lanthanide ion could be subjected to in any arbitrary complex where the lanthanide ion is coordinated to nitrogen or oxygen atoms. From these seven groups, 15 complexes were selected, which were defined as the parameterization set and then were used with a numerical multidimensional nonlinear optimization to find the best parameter set for reproducing chemical properties. The new parameterizations yielded an unsigned mean error for all interatomic distances between the Eu(III) ion and the ligand atoms of the first sphere of coordination (for the 96 complexes considered in the present paper) of 0.09 A, an improvement over the value of 0.28 A for the previous model and the value of 0.68 A for the first model (Chem. Phys. Lett. 1994, 227, 349). Similar accuracies have been achieved for Gd(III) (0.07 A, 70 complexes) and Tb(III) (0.07 A, 42 complexes). Qualitative improvements have been obtained as well; nitrates now coordinate correctly as bidentate ligands. The results, therefore, indicate that Eu(III), Gd(III), and Tb(III) Sparkle/AM1 calculations possess geometry prediction accuracies for lanthanide complexes with oxygen or nitrogen atoms in the coordination polyhedron that are competitive with present day ab initio/effective core potential calculations, while being hundreds of times faster.     

Synergic extraction of Eu(III) and Tb(III) by 2-thenoyltrifluoroacetone and tribenzylamine

Synergic extraction of Eu(III) and Tb(III) with 2-thenoyltrifluoroacetone (HTTA) and tribenzylamine (TBA) as neutral donor ligand has been studied in chloroform from perchlorate media at lower pH range. The stoichiometric composition of the adduct was established as M(TTA)₃ · 3TBA for both the elements, having a coordination number 9. The formation constants K_3,0 and K_3,3 and stability constant _3,3 of the organic phase reaction have been calculated. The effect of temperature on the extraction has also been studied. The adducts are stabilized by the large exothermic enthalpy change. The calculated thermodynamic functions such as H, S and G were used to elucidate the mechanism of synergism in which the coordination numbers of the lanthanide ions increased.     

Antimicrobial,antioxidant and antitumor activities of Nano-Structure Eu (III) and La (III) complexes with nitrogen donor tridentate ligands

Nano structure metal complexes of Eu (III) and La (III) with two different nitrogen donor tridentate ligands: N-(2-Aminoethyl)-1,3-propanediamine “AEPD = L1” and 1-(2-Aminoethyl)piperazine “AEPz = L2” , were prepared. All synthesized compounds were identified and confirmed by elemental analyses, molar conductivity and spectral analyses (UV–Visible, IR and mass). Conductance measurement indicates that all the complexes are non-electrolytic in nature and the complexes were isolated in 1:1 molar ratio (metal: ligand). Thermal decomposition profiles were consistent with the proposed formulations. The ligands behave as a tridentate ligand through three nitrogen centers of donation. The nano-size was investigated by using transmission electron microscopy (TEM). The geometric structure properties were analyzed using density functional theory (DFT) for ligands and their Lanthanum (III) complexes. The complexes were screened against some bacteria strains, hepatocellular cell line and diphenylhydrazine free radical. The molecular docking active sites interactions were evaluated.     

High-performance liquid chromatographic determination of 1,2-diethyl-3-hydroxypyridin-4-one and its 2-(1-hydroxyethyl) metabolite in rat blood.

A sensitive and selective high-performance liquid chromatographic (HPLC) method for the analysis of 1,2-diethyl-3-hydroxypyridin-4-one (CP94, I) and its 2-(1-hydroxyethyl) metabolite (II) in rat blood is described. I, II and the internal standard, 1-propyl-2-ethyl-3-hydroxypyridin-4-one (CP95, III) were extracted into dichloromethane (3 x 5 ml, with the addition of 1 g of sodium chloride) from blood (0.25 ml plus 0.75 ml of pH 7.0 morpholinopropanesulphonic acid buffer). Extractability approached 100% for I and III, and approximately 65% for II under these conditions. Chromatographic analysis was carried out using a Hypercarb porous graphitised carbon HPLC column (10 cm x 0.46 cm). The mobile phase was 14:86 (v/v) acetonitrile-NaH2PO4 buffer (10 mM, containing 2 mM EDTA, pH adjusted to 3 with phosphoric acid) and detection was by ultraviolet at 280 nm. Calibration curves were linear (correlation coefficient greater than 0.99) and reproducible over the concentration range 0-80 micrograms/ml and the coefficient of variation was less than 16% even at low (1 microgram/ml) concentrations. The minimum quantifiable level was 0.5 microgram/ml for both I and II.     

Chromium(III): Extra nonlability of its 1:1 chelates of polycarbonylic ligands

Decomplexation rates of chromium(III) chelates of dicarbonylic and tricarbonylic ligands in aqueous solution have been evaluated. Results show an extreme nonlability of these metal complexes that does not depend on the chelating ligand structure. A more extensive analysis including structurally similar complexes of first‐row transition metal ions [Ni(II), Co(II), and Cu(II)] shows decomplexation rate values at least 10⁴ times higher than the rate constants of previously mentioned chromium metal complexes. Correlations between the decomplexation rate constants and the deprotonation capability of the enol tautomer suggest that the decomplexation rates of a structurally similar 1:1 chelate of quoted metal ions may be predicted from the ligand dissociation constant. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 178–183, 2000     

An oxazoline derivatized Pybox ligand for Eu(III) and Tb(III) sensitization

A new Tb(III) dimer with an oxazoline-derivatized pyridine ligand, dimethyl-2,2′-(pyridine-2,6-diyl)bis(4,5-dihydrooxazole-4-carboxylate), has been isolated. This complex is highly luminescent and crystallizes in the triclinic P-1 space group with parameters a = 9.6167(2) Å, b = 11.6786(2) Å, c = 12.7548(3) Å, α = 70.026(1)°, β = 83.219(1)°, γ = 81.973(1)° and V = 1329.31(51)ų. Solution speciation studies showed the formation of monomeric species with 1:1 and 2:1 ligand-to-metal ion stoichiometries with log β₁₁ = 3.66 ± 0.41 and log β₂₁ = 6.16 ± 0.37 for Eu(III) and log β₁₁ = 3.56 ± 0.41 and log β₂₁ = 6.21 ± 0.38 for Tb(III). The quantum yields of emission Φ and luminescence lifetimes τ of solutions with 2:1 stoichiometry were 26.4 ± 0.5% and 1.47 ± 0.06 ms for Eu(III) and 41.0 ± 1.3% and 1.87 ± 0.06 ms for Tb(III).     

Synthesis of 3,4-Dihydrophthalazin-1(2H)-one by Zinc Reduction of Phthalazin-1(2H)-one

3,4-Dihydrophthalazin-1(2H)-one (II) was first prepared by H.Sund ¹⁾, by electrochemical reduction of phthalazin-1(2H)-one (I) (phthalazone). In the recent years we have described new syntheses of II, through easily hydrolyzable mono- or diacetyl- derivatives, namely condensation of 2-bromomethylbenzoylchloride with N,N'-diacetylhydrazine ²⁾ catalytic reduction of I in acetic acid ²⁾ or of 2-acetylphthalazone in acetic anhydride ³⁾ The reduction of I with zinc is known to proceed with ring contraction and formation of N-aminophthalimidine (III)⁴⁾ (zinc and sodium hydroxide at about 100[ddot]C) or of phthalimidine (IV) ⁵⁾ (zinc and hydrochloric acid under unspecified conditions).

Having observed that II is transformed into N-aminophthalimidine when heated with hydrazine hydrate ⁶⁾ or sodium hydroxide ²⁾, the zinc reduction of I was reinvestigated with the aim to find out in which cases the intermediate formation of II can be dem-onstratedo