Surface interaction of ethylene glycol with silver

Interaction of ethylene glycol with clean and oxidized surfaces of an Ag catalyst has been studied under pre-catalysis conditions. On a clean surface, ethylene glycol was reversibly adsorbed with the formation of a multilayer coverage. Adsorbed ethylene glycol weakly bonded to the oxidized silver surface leads to the selective formation of glyoxalvia two parallel routes: dehydrogenation and oxidation. Dissociative interaction of ethylene glycol with Ag led to the appearance of formaldehyde and carbon dioxide by-products.     

纤维二糖与葡萄糖催化转化制备乙二醇(英文)

选用纤维二糖作为探针分子,探索纤维素催化转化制备乙二醇过程的反应路径.分别考察了纤维二糖和葡萄糖在双组分催化剂H2WO4和Ru/C下的催化反应活性.结果表明,乙二醇不仅来自于纤维二糖水解产物葡萄糖的逆羟醛缩合作用,同时也可以来自于纤维二糖的直接逆羟醛缩合过程.而且,纤维二糖的直接逆羟醛缩合作用对糖苷键的水解也有一定的促进作用.比较发现,钨基催化剂作用下纤维二糖的逆羟醛缩合反应活性比葡萄糖要低,因此乙醇醛可以缓慢产生并在Ru/C催化剂上迅速加氢生成乙二醇.使得以纤维二糖作为原料比以葡萄糖作为原料时获得更高的乙二醇收率.     

The thermal conductivity of alumina nanoparticles dispersed in ethylene glycol

The thermal conductivities of several nanofluids (dispersions of alumina nanoparticles in ethylene glycol) were measured at temperatures ranging from 298 to 411 K using a liquid metal transient hot wire apparatus. Our measurements span the widest range of temperatures that have been investigated to date for any nanofluid. A maximum in the thermal conductivity versus temperature behavior was observed at all mass fractions of nanoparticles, closely following the behavior of the base fluid (ethylene glycol). Our results confirm that additional temperature contributions inherent in Brownian motion models are not necessary to describe the temperature dependence of the thermal conductivity of nanofluids. Our results also show that the effect of mass or volume fraction of nanoparticles on the thermal conductivity of nanofluids can be correlated using the Hamilton and Crosser or Yu and Choi models with one adjustable parameter (the shape factor in the Hamilton and Crosser model, or the ordered liquid layer thickness in the Yu and Choi model).     

氧化锆负载Pd-Cu双金属催化剂上山梨醇选择性氢解合成乙二醇和丙二醇

山梨醇和木糖醇等多元醇是可再生生物质转化合成液体燃料和化学品的重要平台分子,其中,可通过选择氢解反应一步制备乙二醇和丙二醇等重要化工原料,有望代替从乙烯和丙烯制备二元醇的传统石油化工工艺.目前文献中多元醇氢解反应主要使用Ru基和Ni基催化剂等,但是不可避免地生成C?C键非选择性断裂的副产物甲烷等.与之相比,非贵金属Cu基催化剂往往具有较优异的选择性,但其活性较低和水热稳定性较差.因此,到目前为止研制具有高活性和选择性、以及良好水热稳定性的Cu基催化剂用于生物质基多元醇氢解反应仍然存在挑战.在本文中,我们采用贵金属修饰的方法提高Cu基催化剂在山梨醇选择氢解反应中的活性和水热稳定性.通过分步浸渍法合成了1%Pd-3%Cu/ZrO2、1%Pt-3%Cu/ZrO2和1%Ru-3%Cu/ZrO2双金属催化剂,并比较了它们在山梨醇氢解反应中的催化性能.在相同的反应条件下,上述催化剂中1%Pd-3%Cu/ZrO2(Cu/Pd =5)具有最优的活性及乙二醇、丙二醇和甘油的总选择性.以固体碱La(OH)3为助剂,1%Pd-3%Cu/ZrO2的山梨醇氢解活性高达20.3 h-1,是单金属1%Pd/ZrO2(8.7 h-1)和3%Cu/ZrO2(6.5 h-1)催化剂活性的2-3倍,也高于含有相同Pd、Cu含量的1%Pd/ZrO2和3%Cu/ZrO2机械混合体系的活性(12.2 h-1).而且, Pd-Cu/ZrO2双金属催化剂对C2-C3低碳多元醇的选择性也明显优于Pd/ZrO2和Cu/ZrO2以及二者的机械混合体系.这些结果说明Pd对Cu/ZrO2的促进作用不仅仅需要Pd与Cu两种金属的共同存在,还需要它们两者之间的相互作用.进一步发现, Pd-Cu/ZrO2双金属催化剂在Cu/Pd比为1.5-10.0的较宽范围内都表现出了较高的反应活性(17.8-20.3 h-1)以及乙二醇、丙二醇和甘油的总选择性(57.3%-62.8%),说明较低含量Pd的存在就能够有效地改善Cu催化剂的催化性能.在493 K和5.0 MPa H2的反应条件下,以1%Pd-3%Cu/ZrO2为催化剂,在山梨醇接近完全转化时,获得了61.7%的乙二醇、丙二醇和甘油的总选择性.同时, Pd的加入还能有效地抑制水热反应条件下Cu粒子的团聚,使得Pd-Cu/ZrO2催化剂在山梨醇氢解反应中具有优良的水热稳定性和循环使用性能.在5次循环实验中1%Pd-3%Cu/ZrO2的活性和选择性基本保持不变; X-射线粉末衍射结果表明,反应后的催化剂上未观察到Cu的特征衍射峰, Cu粒子仍然保持良好的分散状态.而对于没有Pd修饰的单金属3%Cu/ZrO2催化剂,经5次循环使用后山梨醇氢解反应的活性则下降了42%;在循环反应中Cu粒子显著地聚集而长大到~30 nm. CO吸附漫反射红外光谱结果揭示了Cu粒子倾向于在Pd粒子表面沉积,随着Cu/Pd原子比的增大, Cu粒子逐渐稀释并覆盖Pd的表面位点,说明Pd与Cu粒子之间存在紧密的接触.氢气程序升温还原结果表明,可能与氢溢流有关, Pd的加入促进了CuO的还原.然而,不同于Pd/ZrO2和Cu/ZrO2机械混合样品的TPR图谱,其显示PdO和CuO各自的还原峰, Pd-Cu双金属催化剂则只存在一个宽化的还原峰,这说明了Pd-Cu之间结构上的紧密接触使得两种金属之间存在强相互作用,其中可能存在从Pd向Cu的电子转移.综合这些结构和电子效应,可以推测Pd的存在促进了Cu粒子对山梨醇的脱氢能力和不饱和中间体的加氢能力,进而提高了Cu基催化剂在山梨醇氢解反应中的活性及目标产物的选择性.同时Pd-Cu之间的强相互作用和氢溢流效应抑制了Cu粒子在水热反应条件下的聚集,提高了催化剂的稳定性.这些结果和认识有助于指导人们为多元醇氢解和其它生物质基化学品的转化反应设计具有更高效率和水热稳定性的新型Cu基催化剂.     

Gas chromatography with mass spectrometry for the quantification of ethylene glycol ethers in different household cleaning products

A rapid and simple procedure is reported for the determination of six ethylene glycol ethers in cleaning products and detergents using gas chromatography with mass spectrometry. The analytes were extracted from 2.0 g samples in acetonitrile (3 mL) and the extract was submitted to a clean‐up step by QuEChERS method, using a mixture containing 0.3 g magnesium sulfate, 0.15 g primary/secondary amine, and 0.05 g C₁₈. The clean acetonitrile extract (1 μL) was injected into the chromatographic system. No matrix effect was observed, so the quantification of the samples was carried out against external standards. Detection limits were in the range 3.0–27 ng/g for the six ethylene glycol ethers. The recoveries obtained, using the optimized procedure, were in the 89.4–118% range, with relative standard deviations lower than 14%. Twenty‐three different household cleaning products, including glass cleaner, degreaser, floor, softeners, and clothes and dishwashing detergents, were analyzed. Large interindividual variations were observed between samples and compounds.     

碳酸乙烯酯选择加氢合成甲醇与乙二醇高效稳定Cu/SiO2催化剂研究

CO2作为重要的碳氧资源, 具有来源丰富、价格低廉、安全等突出优点. 近年来, 由于蕴含的巨大利用潜力,CO2间接利用制备基础化学品、能源燃料对于可持续制备大宗化工品中具有重要研究意义, 日益受到研究者和工业界的广泛重视.甲醇与乙二醇是化学工业中的两种重要大宗原料. 甲醇不仅是重要的有机化工原料、清洁环保的液体燃料, 同时也是氢气和能量储存的良好载体. 乙二醇作为一种重要的有机化工原料, 在聚酯等领域具有广泛应用.CO2经碳酸乙烯酯氢解制备甲醇/乙二醇是典型的原子经济反应, 对资源、能源和环境的可持续发展具有重要意义. 需要指出的是,CO2与环氧乙烷环加成制备碳酸乙烯酯已具备成熟的工业化技术. 因此, 该路线研究重点在于发展碳酸乙烯酯选择加氢联产甲醇和乙二醇高效稳定的催化体系. 近年来, 铜基多相催化剂催化碳酸乙烯酯加氢联产甲醇乙二醇得到了广泛重视. 由于铜基催化剂存在活性较低、高温易失活等问题, 开发高效且具有良好稳定性的铜基催化剂是目前碳酸乙烯酯加氢研究重点.本文针对碳酸乙烯酯选择氢解合成甲醇乙二醇新型铜基催化体系构建和构效关系研究, 采用硅溶胶蒸氨法制备高分散 Cu/SiO2过程中引入多羟基β-环糊精修饰催化剂前驱体的合成策略, 并通过惰性气体中煅烧后的积碳有效抑制活性铜物种的团聚, 获得了β-环糊精改性的 Cu/SiO2催化剂. 通过 N2吸脱附、XRD、N2O 滴定、H2-TPR、TEM 和 XPS 等系统表征,发现β-环糊精可有效调控催化剂结构和表面不同价态活性铜物种分布. 碳酸乙烯酯加氢性能评价结果表明引入适量β-环糊精的 5β-25%Cu/SiO2具有较优催化活性, 乙二醇选择性 98.8% 和甲醇选择性 71.6%, 且相应的催化活性可达 1178 mgEC gcat-1h-1. 高活性的原因很可能归因于不同价态 Cu0与 Cu+物种协同催化作用及适宜的 Cu+/(Cu0+Cu+) 比例. 结合密度泛函理论模拟计算, 我们提出了 Cu0促进氢气解离、Cu+吸附活化碳酸乙烯酯分子中酯羰基的反应机理. 催化剂重复使用和表征结果表明, 5β-25%Cu/SiO2具有良好的稳定性, 使用前后铜粒子大小和铜物种分布几乎未发生明显变化. 本文为解决铜基催化剂高温易烧结等难题提供了简单有效的活性铜物种稳定化方法, 并为CO2经碳酸乙烯酯绿色合成甲醇、乙二醇高效稳定铜基催化新体系的构筑提供了有益借鉴.     

Plasma-induced graft-polymerisation of ethylene glycol methacrylate phosphate on polyethylene films

A detailed study of argon plasma-induced graft-polymerisation of ethylene glycol methacrylate phosphate (EGMP) on polyethylene (PE) substrates is presented. The process consists of four steps: (a) plasma pre-activation of the PE substrates; (b) immersion in an EGMP solution; (c) argon plasma-induced graft-polymerisation; (d) washing and drying of the samples. Influence of the solution and plasma parameters on the process efficiency, evaluated in terms of amount of grafted polymer and coverage uniformity, is investigated. The plasma-induced graft-polymerisation of EGMP is then followed by sample weighting, contact angle measurements, attenuated total reflection infrared (ATR-IR) spectroscopy and X-ray photoelectron spectroscopic (XPS) analysis. Finally, flame-retardant properties of modified PE substrates are evaluated by limiting oxygen index (LOI) measurements.     

Vapor–liquid equilibrium in the system ethane + ethylene glycol

The solubility of ethane in ethylene glycol (EG) has been determined at temperatures in the range 298–398 K at pressures up to 20 MPa. The experimental results were correlated by the Peng–Robinson equation of state, and interaction parameters have been obtained for this system. The parameters in the Krichevsky–Ilinskaya equation were calculated from these interaction parameters.     

Binary vapor–liquid equilibrium of methyl glycolate and ethylene glycol

Vapor pressure of methyl glycolate and the binary isothermal vapor–liquid equilibrium of ethylene glycol and methyl glycolate were measured by using static method. The experimental data was correlated with the Wilson and NRTL activity coefficient models. Good agreement between the experimental data and model is achieved.     

Glass transition and enthalpy relaxation of ethylene glycol and its aqueous solution

Differential scanning calorimetry (DSC) and cryomicroscopy were employed to investigate the glass transition and enthalpy relaxation behaviors of ethylene glycol (EG) and its aqueous solution (50% EG) with different crystallization percent. Isothermal crystallization method was used in devitrification region to get different crystallinity after samples quenched below glass transition temperature. The DSC thermograms upon warming showed that the pure EG has a single glass transition, while the 50% EG solution has two if the solution crystallized partially. It is believed that the lower temperature transition represents the glass transition of bulk amorphous phase of EG aqueous solution glass state, while the higher one is related to ice inclusions, whose mobility is restricted by ice crystal. Cryomicroscopic observation indicated that the EG crystal has regular shape while the ice crystal in 50% EG aqueous solution glass matrix has no regular surface. Isothermal annealing experiments at temperatures lower than T_g were also conducted on these amorphous samples in DSC, and the results showed that both the two amorphous phases presented in 50% EG experience enthalpy relaxation. The relaxation process of restricted amorphous phase is more sensitive to annealing temperature.     

Determination of ethylene glycol dinitrate in dynamites using HPLC: application to the plastic explosive Goma-2 ECO

In this study, a sequential extraction method using water and methanol to recover ethylene glycol dinitrate or nitroglycol (EGDN) contained in Goma-2 ECO dynamite was developed. After, an HPLC method was used for the determination of EGDN in the two extracted phases. The analytical method was validated by evaluating its selectivity, sensitivity, linearity, and linear working concentration range, limit of detection and quantitation, precision (as repeatability and intermediate precision), accuracy, and robustness, providing appropriate values (i.e. RSD values for precision about 6% and accuracy about 100%). Finally, the EGDN content of a sample of the Goma-2-ECO dynamite was determined obtaining a concentration of 30.29%, which is in accordance with the manufacturer's specifications for this dynamite (25.7-31.4%).     

聚二甲基丙烯酸乙二醇酯壁材微胶囊的制备及其表征

采用界面自由基聚合的方法,制备了以聚二甲基丙烯酸乙二醇酯(PEGDMA)为壁材,薄荷素油(DPO)与石蜡或者三辛癸酸甘油酯(GTCC)的混合物为芯材的微胶囊.微胶囊壁材是二甲基丙烯酸乙二醇酯(EGDMA)单体通过界面自由基聚合形成的高聚物PEGDMA.提出了该界面自由基聚合形成PEGDMA的机理过程.利用光学显微镜和扫描电镜探究了乳化剂类型、芯材组成和固化温度对微胶囊形貌的影响.用傅里叶红外光谱对微胶囊的化学结构进行了表征.利用紫外分光光度计测出了未被微胶囊包埋的芯材占总芯材的百分比(free oil).并用热重分析仪分析了微胶囊的热稳定性能,讨论了固化时间对微胶囊热性能的影响.结果表明,采用阿拉伯树胶为乳化剂,芯材组成为质量比M_(DPO)/M_(GTCC)=1∶1,在60℃下固化1 h,制备出的微胶囊为饱满的球形状,表面光滑.同时测得该体系中芯材的free oil为26.5 wt%.PEGDMA微胶囊在60℃固化温度下反应3 h,具有很好热稳定性,且固化温度升高能提高微胶囊的热稳定性.所制备的微胶囊无毒,在个人护理品和医药领域具有广泛的应用前景.     

Polycaprolactone–poly(ethylene glycol) block copolymer,I: synthesis and degradability in vitro

A new type of biodegradable polymer material, poly(caprolactone)–poly(ethylene glycol) block copolymer (PCL-b-PEG), was synthesized by means of direct copolycondensation of ε-caprolactone with poly(ethylene glycol) in the presence of a Ti(OBu)₄ catalyst. The degradability of the polycaprolactone was improved by introducing a PEG component into it. The degradation of PCL-b-PEG copolymer increase with a decreasing crystallinity of the copolymer, and can be controlled by adjusting the component ratio of the copolymer.     

Nonswellable and swellable ethylene glycol dimethacrylate-acrylic acid copolymer microspheres

In this study, nonswellable and swellable poly(ethylene glycol dimethacrylate/acrylic acid) copolymer microspheres, in the size range of 50–150 μm, were produced by conventional and modified suspension copolymerizations of the respective monomers, i.e., ethyleneglycol dimethacrylate (EGDMA) and acrylic acid (AA) in aqueous media. Poly(vinyl alcohol) and benzoyl peroxide were used as the stabilizer and the initiator. The diluent, i.e., toluene was included in the polymerization recipe of the modified suspension polymerization. The microspheres were characterized by optical microscopy, FTIR, and FTIR-DRS, and potentiometric titrations. Highly crosslinked, transparent, and nonswellable poly(EGDMA/AA) microspheres were obtained with the conventional suspension polymerization procedure. The modified suspension polymerization provided swellable, opaque, and crosslinked copolymer microspheres. Acrylic acid incorporation into the copolymeric microspheres were significantly higher in the modified procedure, relative to the conventional procedure. © 1996 John Wiley & Sons, Inc.     

Determination of trace ethylene glycol in industrial solvents and lubricants using phenyl boronic acid derivatization and multidimensional gas chromatography

A practical gas chromatographic approach is introduced for the characterization of trace ethylene glycol in industrial solvents and lubricants. The analytical approach employs single step derivatization technique that effectively converts ethylene glycol to the cyclic boronate ester (2-phenyl-1,3,2-dioxaborolane), using phenyl boronic acid as a derivatizing reagent. The separation of the derivatized product was achieved by using multidimensional gas chromatography. Heavy lubricant matrices like engine crankcase oil were back-flushed to improve sample throughput and system cleanliness. Detection and quantitation of 2-phenyl-1,3,2-dioxaborolane was conducted with mass spectrometry in selected ion monitoring mode.     

New Method for Determining the Degree of Cellulose I Crystallinity by Means of FT Raman Spectroscopy

A Raman crystallinity index – Xc_Raman – characterizing the degree of crystallinity of partially crystalline cellulose I samples was created, utilizing the crystallinity dependence of CH₂ bending modes. For calibration, physical mixtures containing different mass fractions of crystalline cellulose I and its amorphous form were prepared. Crystallinities from 0 to 60% were generated. Relative intensity ratios of the Raman lines I and I characterizing crystalline and amorphous parts of cellulose I correlated linearly with the mass fraction of crystalline cellulose I of the mixtures. Xc_Raman values of microcrystalline celluloses of different origins and varying degree of crystallinity correlated reasonably with results obtained from NMR spectroscopy (Xc_NMR values).     

Dechlorination of poly(vinyl chloride) using NaOH in ethylene glycol under atmospheric pressure

A solution of NaOH dissolved in ethylene glycol (EG) was effective in the dechlorination of poly(vinyl chloride) (PVC) at atmospheric pressure. The degree of dechlorination increased with increasing temperature, reaching a maximum of 97.8% at 190 °C. The dechlorination proceeded under chemical control and exhibited first-order kinetics with an apparent activation energy of 170 kJ mol⁻¹. The apparent rate constant for dechlorination in 1.0 M NaOH/EG was approximately 150 times greater than that in 1.0 M NaOH/H₂O. In addition, dechlorination was faster at atmospheric pressure in NaOH/EG than under high pressure in NaOH/H₂O. The dechlorination reaction occurs via a combination of E2 and S_N2 mechanisms.     

Ab initio study of the conformational equilibrium of ethylene glycol

Summary The conformational equilibrium of ethylene glycol (CH₂OHCH₂OH) has been examined by performing geometry optimizations at the 6-31G*, MP2/6-31G* and 6-31G** levels. Final energies have been calculated at the MP3 level with the optimized geometries. The two most stable conformers are atGg andgGg but it is verified that the inclusion of electronic correlations reduces their energy difference of 0.6 kcal/mol at the HF level to less than 0.2 kcal/mol. The possible coexistence of the two most stable conformers is in agreement with some previous studies of Frei et al. For thetXg conformer a detailed analysis of the intramolecular potential as a function of rotation around the C-C bond is also reported.     

Synthesis of 2-methylpyrazine from cyclocondensation of ethylene diamine and propylene glycol over promoted copper catalyst

The 2-methylpyrazine was synthesized by catalytic reaction of ethylene diamine and propylene glycol at 380 ℃. The alumina supported copper catalysts with promoter were prepared by impregnation method, characterized by ICP-AES, BET and TPR. The results demonstrated that the dehydrogenation was improved by addition of chromium promoter. The selectivity of 2-methylpyrazine reached 84.75%, while the conversions of reactants were also enhanced.