Selective recognition of organic pollutants in aqueous solutions with composite imprinted membranes

In this work, thin-layer composite membranes imprinted with desmetryn or ibuprofen were prepared and studied for selective recognition of the template compounds in aqueous solutions. The imprinted membranes were developed using photoinitiated copolymerization of 2-acrylamido-2-methyl-1-propane sulphonic acid and N,N'-methylene-bis-acrylamide, in the presence of desmetryn or via copolymerization of dimethylaminoethyl methacrylate, and trimethylopropane trimethacrylate, in the presence of ibuprofen, followed by deposition of the imprinted layers on the surface of porous microfiltration supports of various chemical nature. Atomic force microscopy was used to study the surface morphological characteristics of the developed membranes. Molecularly recognition properties of imprinted membranes were evaluated by measuring their capability to bind the template molecules from polycomponent aqueous solutions. It was shown that obtained membranes may be used as selective recognising elements of portative differential capacitor sensor device for express monitoring of the target molecules in water. The sensor performance is based on registration of the alteration of dielectric permeability of composite imprinted membrane at selective binding of template molecules, when the analyzed feed solution is filtered through the membrane sample.     

Preparation and characterization of mono-valent ion selective polypyrrole composite ion-exchange membranes

Polypyrrole composite cation- and anion-exchange membranes (CEM and AEM), in which polypyrrole (PPY) coated on one surface of the membrane as a thin layer, were prepared by chemical polymerization of pyrrole in the presence of high oxidant concentration (Na₂S₂O₈). Existence of polypyrrole layer on the both types of ion-exchange membranes were confirmed by recording their coating density, SEM images and conductivity. These membranes were extensively characterized by recording their properties such as water uptake, ion-exchange capacity, contact angle, permselectivity and membrane conductivity as a function of polymerization time such as. It was observed that due to coating of PPY for 2 h, membrane permselectivity of CEM for NaCl (0.907) was reduced to 0.873, while it was increased from 0.747 to 0.889 in the case of AEM. Similar behaviors were also obtained for bi-valent electrolytes. Electrodialysis experiments were also conducted with polypyrrole composite ion-exchange membranes using mixed electrolytic systems. Relative dialytic rates for NaCl with respect to other bi-valent electrolyte were varied in between 5 and 8 (depending on bi-valent electrolyte), which suggested the feasible and efficient separation of mono-valent from bi-valent electrolyte. Slower electro-migration of bi-valent electrolyte (CaCl₂, MgCl₂ and CuCl₂) in comparison to NaCl was explained on the basis of synergetic effect of sieving of bulkier bi-valent cations by tight and rigid polypyrrole layer and the difference in electrostatic and hydrophobic–hydrophilic repulsion force between bi-valent cations and mono-valent cation. It was concluded that these composite membranes are suitable for the efficient separation of same type of charged ions by electro-driven separation techniques.     

Molecularly imprinted poly (methacrylamide-co-methacrylic acid) composite membranes for recognition of curcumin

In this study, molecularly imprinted poly (methacrylamide-co-methacrylic acid) composite membranes with different ratio of methacrylamide (MAM) versus methacrylic acid (MAA) were prepared via UV initiated photo-copolymerization on the commercial filter paper. Curcumin was chosen as the template molecule. Infra-red (IR) spectroscopy was used to study the binding mechanism between the imprinted sites and the templates. The morphology of the resultant membranes was visualized by scanning electron microscopy (SEM). Static equilibrium binding and recognition properties of the imprinted composite membranes to curcumin (cur-I) and its analogues demethoxycurcumin (cur-II) or bisdemethoxycurcumin (cur-III) were tested. The results showed that curcumin-imprinted membranes had the best recognition ability to curcumin compared to its analogues. From the results, the biggest selectivity factor of α_cur-I/cur-II and α_{cur-I/cur-III} were 1.50 and 5.94, and they were obtained from the composite membranes in which MAM/MAA were 1:4 and 0:1, respectively. The results of this study implied that the molecularly imprinted composite membranes could be used as separation membranes for curcumin enrichment.     

Evaluation of selective composite cryogel for bromate removal from drinking water

Bromate, which is a potential carcinogen, should be removed from drinking water to levels of less than 10 μg/L. A chitosan‐based molecularly imprinted polymer (MIP) and a sol–gel ion‐exchange double hydrous oxide (Fe₂O₃·Al₂O₃·xH₂O) adsorbent (inorganic adsorbent) were prepared for this purpose. The sorption behavior of each adsorbent including sorption kinetics, isotherms, effect of pH and selective sorption were investigated in detail. Sorption experimental results showed that the MIP adsorbents had better selectivity for bromate, even in the presence of high concentrations of nitrate, as compared to the inorganic adsorbent. It was found that pH does not affect the adsorption of bromate when using the inorganic adsorbent. Additionally, both adsorbents were immobilized in a polymeric cryogel inside plastic carriers to make them more practical for using in larger scale. Regeneration of the cryogels either containing MIP or inorganic adsorbents were carried out by 0.1 M NaOH and 0.1 M NaCl, respectively. It was found that the regenerated MIP and inorganic adsorbents could be used at least three and five times, respectively, without any loss in their sorption capacity.     

Gas transport properties of polypropylene/clay composite membranes

Polypropylene membranes modified with natural and organically modified montmorillonite clays were prepared. The permeability, diffusivity and solubility of helium, oxygen and nitrogen were determined for the unfilled and filled membranes over the temperature range 25-65 °C. Physical properties of polypropylene membranes were investigated using X-ray diffraction, thermogravimetric analyser, tensile testing and differential scanning calorimetry. The results showed that the filled membranes exhibit lower gas permeability compared to the unfilled polypropylene membrane. For helium, a reduced diffusivity is mainly responsible for the reduction in the permeability, in contrast, for nitrogen and oxygen, both diffusivity and solubility were reduced by the presence of fillers. The X-ray diffraction spectra showed that the incorporation of the unmodified and modified clay did not affect the crystallographic nature of polypropylene.     

Daidzein-imprinted membranes using co-functional monomers

Daidzein-imprinted poly(methacrylamide-co-acrylic acid) composite membranes with different ratios of methacrylamide (MAM) versus acrylic acid (AA) were prepared via UV initiated photo-copolymerization on the commercial filter paper with ethylene glycol dimethacrylate (EGDMA) as cross-linker and mixed cellulose ester as agglutinant. Infra-red (IR) spectroscopy and scanning electron microscope (SEM) were used to visualize the surface of the membranes. Binding and recognising properties of the imprinted composite membranes to daidzein and its analogues genistein were evaluated by static adsorption experiment. It was found that the daidzein-imprinted membranes showed high selectivity to daidzein, with the highest selectivity when the composite membrane with the ratio of MAM vs AA as 4:1. The results suggested that the molecularly imprinted composite membranes were potentially useful for daidzein enrichment.     

Novel composite membranes embedded with molecularly imprinted porous polymeric nanospheres for targeted phenol

In the present research, novel hybrid molecularly imprinted polymer (HMIP) membranes were synthesized for selective adsorption and separation of phenol toxic molecules from aqueous solutions. Molecularly imprinted polymer (MIP) nanospheres for targeted phenol were successfully prepared using precipitation polymerization of methacrylic acid, trimethylolpropane trimethacrylate, and ethylene glycol dimethacrylate, followed by integrating into polysulfone matrix to create the HMIP membranes via a phase inversion method. The fabricated materials were characterized from the viewpoints of spectroscopic analysis, structural and surface morphological properties, porosimetry, and batch rebinding assays. The imprinted polymeric nanospheres with mean diameter value ranging from 210 to 250 nm and average pore diameter of 8 nm were obtained according to the morphological and Brunauer–Emmett–Teller analysis, respectively. Scanning electron microscopy pictures demonstrated that the MIP spheres were uniformly distributed on the surface and in the bulk polymer phase of the hybrid membrane. The surface roughness, porosity, and permeate flux of membrane were significantly augmented by addition of the imprinted polymer particles in the dope solution. HMIP‐2 membrane containing 10 wt% of MIP showed the highest binding capacity and an excellent molecular recognition for phenol with respect to the correlative blank membrane. The selective recognition of phenol on the HMIP‐2 membrane was 3.5 times larger than the analogous compound (i.e. catechol). Moreover, the maximum separation factor of phenol was obtained as 2.19 relative to catechol through selective permeation studies, which was also observed for HMIP‐2 membrane. Copyright © 2015 John Wiley & Sons, Ltd.     

Fabrication and evaluation of molecularly imprinted regenerated cellulose composite membranes via atom transfer radical polymerization

A simple and effective method for surface molecularly imprinted composite membranes （MICMs） for artemisinin （Ars） based on regenerated cellulose membranes was first prepared through surface- initiated atom transfer radical polymerization （ATRP）, and the as-prepared MICMs were then evaluated as adsorbents for selective recognition and separation of Ars molecules. Batch rebinding studies were conducted to determine the specific adsorption equilibrium, kinetics and selective permeation performance. The adsorption capacity of MICMs toward Ars by the Langmuir isotherm model was 2.008 mgg-1, which was nearly 5.0 times higher than non-molecularly imprinted composite membranes （NICMs）. The kinetic property of MICMs was well-fitted by the pseudo-second-order rate equation. The selective permeation experiments were successfully investigated to prove the excellent selective permeation performance for Ars than the competitive analog （artemether）.     

尼卡地平分子聚合物的制备及识别性能研究

采用分子印迹技术合成了以尼卡地平为模板分子,甲基丙烯酸为功能单体的分子印迹聚合物(MIP).运用平衡结合实验研究了聚合物的吸附特性和选择识别能力.通过Scatchard方程分析,结合位点的离解常数Kd=1.03 mmol·L-1,最大表观结合常数Qmax=18.76 μmol·g-1.结果表明,分子印迹聚合物对尼卡地平呈现出较高的吸附性和选择识别性,对尼卡地平药物的分离富集和检测具有实际临床意义.     

A composite metal-organic framework material with high selective adsorption for dibenzothiophene

A composite metal-organic framework material Ag⁺/MOF-101 was synthesized and applied to adsorb dibenzothiophene (DBT) from model oils. The loading of Ag⁺ enhanced the deep adsorptive desulfurization capacity for DBT and significantly weaken the adsorption competitiveness of toluene.     

Study on the variation of morphology and separation behavior of the stainless steel supported membranes at high temperature

Palladium composite membranes were prepared on stainless steel (SUS) supports modified by nickel submicron powder and colloidal silica sols. Permeation tests of the palladium composite membranes were carried out at high temperature in order to observe the thermal stability of the membrane. The palladium composite membrane failed with formation of plenty of pinholes in the presence of hydrogen at high temperature. The failure of the composite membrane was verified by comparing the nitrogen permeance before hydrogen permeation test with that after hydrogen permeation test and comparing the H₂/N₂ selectivity for single gas permeation test with that for mixture gas permeation test. The variation of the membrane surface due to the failure of the membrane was characterized in scanning electron microscopy (SEM) and energy dispersive X-ray spectrometer (EDS) analyses. As a result, it can be concluded that reducible metal oxides can be attributed to the failure of the composite membranes resulting from reduction of the metal oxides by hydrogen whichever position in the membrane the metal oxides are layered.     

Selective extraction of triazine herbicides from food samples based on a combination of a liquid membrane and molecularly imprinted polymers

A selective extraction technique based on the combination of liquid membrane (microporous membrane liquid–liquid extraction) and molecularly imprinted polymers (MIP) was applied to triazines herbicides in food samples. Simazine, atrazine and propazine were extracted from aqueous food samples through the hydrophobic porous membrane that was impregnated with toluene, which also formed part of the acceptor phase. In the acceptor phase, the compounds were re-extracted onto MIP particles. The extraction technique was optimised for the amount of molecularly imprinted polymers particles in the organic acceptor phase, extraction time, and type of organic acceptor solvent and desorption solvent. An extraction time of 90 min and 50 mg of MIP were found to be optimum parameters. Toluene as the acceptor phase was found to give higher triazines binding onto MIP particles compared to hexane and combinations of diethyl ether and hexane. 90% methanol in water was found to be the best desorption solvent compared to acetonitrile, methanol and water. The selectivity of the technique was demonstrated by extracting spiked lettuce and apple extracts where clean chromatograms were obtained compared to liquid membrane extraction alone or to the microporous membrane liquid–liquid extraction – non-imprinted polymer combination. The MIP showed a certain degree of group specificity and the extraction efficiency in lettuce extract was 79% (0.72) for simazine, 98% (1.55) for atrazine and 86% (3.08) for propazine.     

儿茶素活性成分分子印迹聚合物的固相萃取研究

以表没食子儿茶素没食子酸酯(Epigallocatechin-gallate,EGCG)为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在光冷引发条件下合成EGCG分子印迹聚合物,利用该聚合物制成分子印迹固相萃取柱,用于固相萃取茶叶提取物茶多酚,对萃取柱中的清洗液、洗脱剂、上载量等进行了选择.结果表明,在萃取柱上载样品之后,先用V(甲醇):V(水)＝1:9溶液进行清洗,再用V(甲醇):V(乙酸)＝9:1混合液进行目标分子的洗脱,可以得到比较纯的目标物质EGCG(色谱峰相对峰面积达92.4%),萃取柱在上载样品并进行清洗、洗脱之后,EGCG的回收率达69.3%.分子印迹柱具有较好的稳定性和耐用性能,使用20次后其选择性识别能力仍未降低,但空白印迹柱却没有这样的选择性识别能力.     

Preparation of mordenite composite membranes with seeding

Mordenite composite membranes were prepared by means of coating a porous α-alumina support with nanosized mordenite seeds followed by hydrothermal crystallization. A systematic investigation was performed on the influence of several factors such as ageing of the reaction mixture, alkalinity, salt addition and temperature on the formation of a mordenite membrane on the seeded support. The ageing of the reaction mixture reduces the growth rate of mordenite crystal along a-axis and b-axis but hardly influences the growth rate along c-axis. As a result, the boundaries between the surface crystals become a little larger with prolonging the period of ageing time. The growth rate of the mordenite crystal along individual axes increases first and then decreases with increasing concentration of sodium hydroxide. A higher alkalinity is unfavorable for the formation of a continuous mordenite membrane. The addition of salt in the reaction mixture has different effect on the growth rate of the mordenite crystal along each axis. With increasing the amount of salt, there was hardly influence on the growth rate along c-axis, whereas an obvious decline was observed in the growth rate along either a-axis or b-axis, which enlarges the boundaries between the surface crystals. The growth rate of the mordenite crystal increases more along c-axis than that along a-axis or b-axis with increasing temperature for hydrothermal crystallization. The use of a temperature as high as 473 K produces a membrane composed of bar-like crystals with larger boundaries. __________ Translated from Journal of Zhejiang University (Science Edition), 2005, 32(4) (in Chinese)     

Appealing sheath-core spun high-performance composite carbon molecular sieve membranes

Carbon molecular sieve (CMS) membranes are attractive candidates to meet requirements for challenging gas separations. The added ability to maintain such intrinsic properties in an asymmetric morphology with a structure that we term a “Pseudo Wheel+Hub & Spoke” asymmetric form offers new opportunities. For CMS membrane, specifically, the structure provides both selective layer support and low flow resistance even for high feed pressures and fluxes in CO₂ removal from natural gas. This capability is unavailable to even rigid glassy polymers due to the much higher modulus of CMS materials. Combining precursor asymmetric hollow fiber formation and optimized pyrolysis creates a defect free CMS proof-of-concept membrane for this application. Facile formation of the sheath-core spun precursor with a 6FDA-DAM sheath and Matrimid® core also avoids the need to seal defects before or after the carbonization of the precursors. The composite CMS membrane shows CO₂/CH₄ (50 : 50) mixed gas feed with an attractive CO₂/CH₄ selectivity of 64.3 and CO₂ permeance of 232 GPU at 35 °C. A key additional benefit of the approach is reduction in use of the more costly high performance 6FDA-DAM in a composite sheath-core CMS membrane with the “Pseudo Wheel+Hub & Spoke” structure.     

白藜芦醇分子印迹复合膜的制备及其选择性能

以反式白藜芦醇为模板分子,聚偏氟乙烯微孔滤膜为支撑膜,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸脂(EDMA)为交联剂,采用热引发原位聚合方法制备了白藜芦醇分子印迹聚合物膜。研究了分子印迹膜对白藜芦醇及其结构类似物(2-萘酚、白藜芦醇甙和双酚A)的结合和透过性,并用扫描电镜对膜形貌进行了表征。结果表明,印迹复合膜对模板分子白藜芦醇具有良好的吸附选择性,印迹膜对白藜芦醇的吸附量远远大于其它结构类似物,其饱和吸附量达1.72μmol/g,为非印迹膜的3倍;尺寸效应和印迹效应是影响物质在印迹膜上的透过量的两个重要因素,尺寸比模板分子小的2-萘酚最先透过,而相对于尺寸接近或大于模板分子的双酚A或白藜芦醇甙,模板分子优先透过。而且,模板分子在印迹膜上的透过量大于非印迹膜。     

Structure and electrochemical properties of polymeric composite membranes with a selective layer

The structure and electrochemical properties of polyethylene terephthalate track-etched membranes were studied. The membranes were covered with a solution of a styrene-butylmethacrylate copolymer on one side. The formation of a selective layer of copolymer in the pores of the starting membranes led to composite membranes characterized by asymmetric conductivity in electrolyte solutions—a rectification effect similar to the p-n transition in semiconductors. The asymmetry resulted from a considerable decrease in the pore diameter in the deposited copolymer layer, changing the pore geometry, and was also due to the existence of an interface in the pores between the starting membrane and the copolymer layer, having different levels of hydrophilicity.     

Molecularly imprinted polymers prepared in aqueous solution selective for [Sar,Ala]angiotensin II

Conventional molecular imprinting technology allows the synthesis in organic solvents of molecularly imprinted polymers (MIPs) selective toward relatively low molecular weight compounds. However, synthesis in aqueous media of chemically and mechanically stable MIPs that can recognize biomolecules such as peptides and proteins still is a great challenge. In this article, we report the successful synthesis of peptide-selective MIPs in aqueous solution. HPLC evaluation of these polymers with a water-based mobile phase showed their selectivity for the peptide, [Sar¹,Ala⁸]angiotensin II (SA), that had been used as the template, but not for its parent peptide angiotensin II (AII). The binding capacity and selectivity of our MIPs depended on the ratio of template to functional monomer in the polymerization mixture, as well as on the ionic strength and pH of the chromatographic mobile phase. These MIPs can be used for chromatographic detection of the octapeptide [Sar¹,Ala⁸]angiotensin II in aqueous solution, with a detection limit of 8 pmol and a response that is linear (r²>0.99) over the concentration range 0.4-20 μM.     

Development of polyelectrolyte multilayer-coated electrospun cellulose acetate fiber mat as composite membranes

Electrostatic multilayers of chitosan (CHI)/sodium alginate (SA) and CHI/poly(styrene sulfonate) sodium salt (PSS) were alternatively coated on electrospun cellulose acetate (CA) fiber mat. Morphologies of the composite membranes were characterized by scanning electron microscopy. The morphology of the CHI/SA-coated membrane was denser than the CHI/PSS-coated one. The top layers consisted of carboxyl and sulfonic functional groups for SA and PSS layers, respectively. Amino groups of CHI were only presented in slight quantity. X-ray photoelectron spectroscopy (XPS) confirmed the deposition of the amino groups of CHI on the multilayer membrane surface. These composite membranes were characterized for its water permeability where the water flux decreased with an increase in the number of the bilayers. The water flux was in the range of 60 and 40 L m⁻² h⁻¹ for 15 and 25 bilayered membranes, respectively. The sodium chloride (NaCl) solution flux was lower than the pure water flux due to the effect of osmotic pressure, and it decreased with an increase in the NaCl concentration. The rejection of NaCl increased substantially with the number of the bilayers of the polyelectrolytes multilayers. The level of NaCl rejection from this work was in the range of 6% and 15% for 15 and 25 bilayered membranes, respectively.     

药物头孢氨苄分子模板聚合物水中结合性质的研究

采用分子模板技术合成了以头孢氨苄为模板分子以三氟甲基丙烯酸和４－乙烯基吡啶同时为功能单体的分子模板聚合物。将得到的棒状聚合物研磨过筛后,运用平衡结合实验研究了头孢氨苄分子模板聚合物的结合性质,Ｓｃａｔｃｈａｒｄ分析表明,在所研究的浓度范围内,在聚合物中形成了两类不同的结合位点。头孢氨苄分子模板聚合物与其化学组成相同的非模板聚合物相比,有很高的结合容量。底物选择性实验表明,与其它结构相似的药物相比,