Application of a CW chemical laser for remote pollution monitoring and process control

The measurement of the concentration of gaseous hydrogen fluoride in the exhaust of an aluminum plant by resonance absorption of the radiation of a cw chemical HF laser is reported. The HF concentration has been evaluated taking into account the simultaneous absorption of water vapor and carbon dioxide at the HF laser frequencies. The absorption cross sections for H₂O and CO₂ at the HF laser lines have been determined in laboratory experiments.     

Performance studies of a novel design atmospheric pressure pulsed HF/DF laser

Intense multi and single line laser operation is reported from TEA semiconductively preionised HF/DF lasers employing various discrete components or flat plate excitation circuits. The performance, the spectral and the beam characteristics of these lasers are given and are compared to the characteristics of previously described HF/DF lasers. Their improved performance parameters are explained in terms of the preionizing action of the semiconductors, the low inductance of the circuits employed and the good matching of the voltage and current waveforms of the excitation circuitry to their excitation. Finally, their potential in specific applications, like infrared vitreous surgery (HF) or atmospheric laser beam propagation (DF), is stressed.     

Confirmation of far infrared laser assignments from CH3-deformation and CH3-rocking states of optically pumped methanol

High-resolution Fourier transform spectroscopy has been applied to confirm previously proposed assignments for nine far infrared (FIR) laser lines from the CH₃-deformation state of CH₃OH and one line from the CH₃-rocking state. Accurate frequencies are deduced for the observed and other predicted FIR laser transitions. FIR torsional branch frequencies in the ground state which were used in the confirmation are presented. Comments are also made on the OH-bending mode of CH₃OH.     

Dispersion in a cw optically pumped FIR laser

Direct frequency measurements of a¹³CO₂/¹⁵NH₃ OPFIRL output show that laser pulling effects give shifts of a few MHz, which agree well with a density matrix calculation.     

Instability of laser cw oscillation in the presence of a passive medium

For a homogeneously broadened two-level ring laser model the stability of the cw laser oscillation in the presence of a passive medium is investigated. The passive material is treated similar to the active material, but without an external pumping mechanism. Stable and unstable regions are shown for various parameters. The stability region of the cw solution becomes extremly small for certain parameters.     

Astigmatically compensated cw dye laser resonators using lenses

The compensation of the astigmatism of Brewster-angled dye cells can be performed with lenses as well as with spherical mirrors. The advantages of cw dye laser resonators using lenses lie in the linear configuration of the optics and the convenient adjustability of astigmatism compensation. An output efficiency of 30% already at 1.6W pumping power has been observed. In addition, ring laser resonators with lenses have been investigated and they delivered up to 400 mW single mode power in travelling wave operation at less than 2 W pumping power.     

Study of simultaneous oscillation on several transitions in cw CO laser

Received: 13 September 1995/Revised version: 5 August 1996     

Ultra-sensitive mid-infrared cavity leak-out spectroscopy using a cw optical parametric oscillator

We report a portable, all-solid-state, mid-infrared spectrometer for trace-gas analysis. The light source is a continuous-wave optical parametric oscillator based on PPLN and pumped by a Nd:YAG laser at 1064 nm. The generated single-frequency idler output covers the wavelength region between 2.35 and 3.75 μm. With its narrow line width, this light source is suitable for precise trace-gas analysis with very high sensitivity. Using cavity leak-out spectroscopy we achieved a minimum detectable absorption coefficient of 1.2×10^-9 /cm (integration time: 16 s), corresponding, for example, to a detection limit of 300 parts per trillion ethane. This sensitivity and the compact design make this trace-gas analyzer a promising tool for various in situ environmental and medical applications. Received: 19 September 2002 / Published online: 15 November 2002 RID="*" ID="*"Corresponding author. Fax: +49-228/733-474, E-mail: frank.kuehnemann@iap.uni-bonn.de     

Characteristics of a hybridly mode-locked cw dye laser

We present experimental and theoretical results on the characteristics and random variations of subpicosecond pulses generated by a synchronously pumped cw dye laser with saturable absorber. The analysis of the power spectra indicates rapid fluctuations of the pulse duration of 40–50%, energy fluctuations of 3%, and a jitter of the repetition time of 0.1% corresponding to an absolute jitter of 12 ps. The latter is caused mainly by the temporal jitter of the pump laser. A mismatch of the lengths of the dye and the pump-laser cavity can result in a nonstationary mode-locking regime with a periodic change of the pulse parameters. The interpretation of the experimental results are supported by computer simulations of the pulse evolution process.     

Tunable simultaneous double-wavelength operation of a cw CO2 laser

Stable step-tunable simultaneous double-wavelength emission from any branch combination of the 9.6 and 10.6 μm bands of a cw CO₂ laser is reported in which the relative strengths of the two signals may be controlled.     

A broadly tunable IR waveguide Raman laser pumped by a dye laser

Design and performance characteristics of a tunable ir waveguide Raman laser pumped by a high power dye laser are described. Using SRS up to third Stokes order in compressed H₂, the wavelength range from 0.7 to 7 μm has been covered without gaps. Taking advantage of a waveguide structure in the scattering chamber, energy conversion efficiencies better than 1% with power levels in excess of 80 kW for the third Stokes component have been achieved. The experimental results support the theoretical predictions that a 4-wave parametric process is responsible for the production of the third Stokes component.     

On noise and fluctuations in a synchronously mode-locked cw laser system

A single-shot and synchronously-scanned streak camera, autocorrelation and noise spectrum analysing techniques are utilized to study the output characteristics of synchronously mode-locked cw lasers. Four main conclusions are drawn: (i) the pulse train from a synchronously-pumped dye laser reveals, besides phase jitter, considerable pulse shape fluctuations; (ii) autocorrelation measurements may be highly misleading when actual pulse shapes are considered; (iii) both the phase jitter and pulse shape fluctuations of the dye laser output are caused by the phase fluctuations of the pumping ion laser pulse train; (iv) the phase jitter of the ion laser proceeds from the fluctuations in the cavity roundtrip time with a characteristic time of about 5 s. Under optimum conditions the rms noise of the dye laser output was 2% and the phase jitter with respect to the rf sine drive of the acousto-optical mode-locker, 30 ps. A qualitative explanation fo the noise properties is given.     

A computer model of a transverse discharge cw CO laser

A kinetic model has been developed for the investigation of the novel performance of a CO laser, on which efficient extraction of laser power was obtained by exciting a subsonic gas mixture of CO/N₂/He/O₂ through transverse dc discharge. Kinetic equations for direct excitation by electron impact, V-V and V-R/T energy transfer, and stimulated emission are coupled with a semi-one-dimensional flow model. Careful consideration is devoted especially to the V-V transfer process of CO–N₂ and N₂–N₂. The laser power was calculated by a constant gain method. The laser output performance, examined as a function of gas mixture ratio, temperature, flow velocity, and discharge current, was in good agreement with the experiment.     

Experimental study of cw carbon monoxide flame chemical laser of the CS2/O2/CO2 type

The performance of a continuous-wave (cw) CO flame chemical laser (FCL) of the CS₂/O₂/CO₂ type is presented. The laser gives up to 0.7 W cw output power on a number ofP _v (J) lines corresponding to 1110, ..., 76 vibrational bands of CO molecule. The measured values of chemical efficiency based on the reaction O+CSCO^*(v)+S and the specific power are 0.1% and 0.7J/g, respectively. The spectral composition of the CO FCL of the CS₂/O₂/CO₂ type shows lasing in the region from 5.194 to 5.573 m. All experimental measurements are conducted with a nondispersive optical cavity.     

cw dual-wavelength operation of a diode-end-pumped Nd:YVO4 laser

A dual-wavelength continuous wave (cw) diode-end-pumped Nd:YVO₄ laser that generates simultaneous laser action at the wavelengths 1064 nm and 1342 nm is demonstrated. The optimum oscillation condition for the simultaneous dual-wavelength operation in a diode-end-pumped solid-state laser has been derived. The relationship between the laser cavity and the output stability is also studied. Experimental results show that the stability of the output power at the two wavelengths could be enhanced by use of a three-mirror cavity. Received: 26 August 1999 / Revised version: 11 October 1999 / Published online: 23 February 2000     

Efficient cw sodium dimer Raman laser operation in a high-temperature sapphire cell

cw Raman lasing of Na₂ molecules generated in a heated, sealed-off, all-sapphire cell is demonstrated. Being not damaged by highly corrosive alkaline vapours, this type of cell enables operation without buffer gas in contrast to the normal heatpipe operation of these lasers. This allows us to study Raman lasers in alkaline vapours in new regimes and under ideal conditions. With an argon ion pump laser at 488 nm, Raman laser operation at 525 nm with more than 10% efficiency and thresholds below 0.2 mW for a cell without buffer gas (length 9 cm) have been obtained so far. The low thresholds, being a factor of 10 less than for comparable heatpipe operation, gives us the chance to use low-power diode lasers as pump sources and to realize compact reliable Raman laser systems. Received: 17 May 1999 / Published online: 25 August 1999     

Application of a CW helium neon laser for measurement of gaseous hydrogen fluoride concentration

The concentration of gaseous hydrogen fluoride in air can be measured by the use of a close coincidence between the 3P ₄–2s ₂ cascade cw helium neon laser line and the 1R5 hydrogen fluoride absorption line. A nearby cw HeNe laser line (3p ₂–2s ₂) is not absorbed by hydrogen fluoride and may be used to compensate for transmission losses in a long-path measurement system. Most of the HFv=0 tov=1 absorption lines lie in a region in which there is strong attenuation caused by atmospheric water vapour, but the 1R5 line is almost free of interference from H₂O, CO₂ or CO.     

Spectral investigation of cw rf-pumped atomic Xe laser with a slab geometry

A radiofrequency excited atomic Xe slab laser with an active volume of 2 × 10 × 300 mm³ using a quartz envelope containing the laser-gas mixture shows a stable cw performance with an output power of almost 1 W. The free-running system oscillates, depending on gas composition and density, on several lines between 1.73 and 3.51 m. Line competition phenomena are observed. Single-line oscillation yields more than 500 mW.     

Intracavity second-harmonic generation of chemical oxygen-iodine laser emission using a LBO crystal

Intracavity second-harmonic generation of continuous-wave chemical oxygen-iodine laser emission has been studied. A chemical oxygen-iodine laser with a maximum fundamental-wave output power of about 10 W in a concentric cavity was used. Experiments were performed for three types of optical cavities using an 1 cm LBO crystal. Second-harmonic output of 12.4 W, 6.2 W, and 5.2 W, effective extraction efficiencies of 155.0% 65.9%. and 55.3%, and single-pass conversion efficiencies of 0.615%, 0.685%, and 0.655% were obtained for the respective cavities. A comparison of these results of coupling by frequency doubling with the results of fundamental-wave output coupling of this system is also presented.     

Photophysical properties and laser performance of rubrene

The potential of rubrene as a laser dye was investigated in deaerated solutions with a XeCl excimer laser as pump source. Laser tuning range, quantum efficiency and photostability as well as excited singlet state absorption (ESA) spectra were measured. The (S₁-S₂) absorption band strongly overlaps with the fluorescence spectrum and thus ESA constitutes an important loss factor in the lasing process while triplet absorption can be neglected in the wavelength region of interest. Laser performance of rubrene is superior compared to other polycyclic aromatic hydrocarbons which can be considered as model compounds of the lasing process in organic dyes.