Nucleation and aggregative growth process of platinum nanoparticles studied by in situ quick XAFS spectroscopy

The early stage in the nucleation and subsequent aggregative particle growth of the colloidal platinum (Pt) dispersions produced by photoreduction in an aqueous ethanol solution of poly(N-vinyl-2-pyrrolidone) (PVP) was quantitatively investigated by means of in situ quick XAFS (QXAFS) measurements. The stages of the reduction-nucleation and the association process (aggregative particle growth and Ostwald ripening) of Pt atoms to produce Pt nanoparticles was successfully discriminated in course of the photoreduction time. The present QXAFS analysis indicated that Pt nuclei (i.e., (Pt(0))(m) nucleates approximately m = 4) were continuously produced in the reduction-nucleation process at the early time, followed by the aggregative particle growth with the autocatalytic reduction of Pt ionic species on the surface of Pt nuclei to produce Pt nanoparticles. Subsequently the particle growth proceeded via Ostwald ripening, resulting in the production of larger Pt nanoparticles at a later time. It was also found that the aggregative particle growth follows a sigmoidal profile well described either by the solid-state kinetic model or by the chemical-mechanism-based kinetic model, specifically the Avrami-Erofe'ev or Finke-Watzky models. The difference in terms of the formation mechanism was observed between the reduction of Pt(IV)Cl(6)(2-) and Pt(II)Cl(4)(2-) as a source material. Also presented is that the addition of the photoactivator such as benzoin, benzophenone, and acetophenone in the system is very effective to enhance the rate for the formation of Pt nanoparticles.     

In Situ Monitoring of Pt Nanoparticle Formation in Ethylene Glycol Solution by SAXS-Influence of the NaOH to Pt Ratio

The temporal evolution of Pt nanoparticle formation in ethylene glycol solution from H(2)PtCl(6)·6H(2)O at 90 °C for different molar ratios of NaOH to Pt (84, 6.5, and 2) in the presence or absence of poly(N-vinyl-2-pyrrolidone) (PVP) as protecting agent was followed in situ by small-angle X-ray scattering (SAXS). The SAXS profiles were analyzed regarding particle size and size distribution using the Guinier approximation and the indirect Fourier transform technique (IFT). The NaOH to Pt ratio has an influence on the integral nanoparticle formation rate as well as on the metal reduction rate and the ratio of nucleation to growth reactions. The fastest nanoparticle formation rate was observed for the NaOH/Pt ratio of 6.5. The obtained results indicate that the differences in the particle formation rate might be due to differences in the reduction rate of the formed Pt complexes. In alkaline reaction media (NaOH/Pt = 84 or 6.5), small nanoparticles with a relatively narrow size distribution were formed. Therefore, it is assumed that for these NaOH/Pt ratios the particle formation is dominated by nucleation reactions. Additionally, the in situ studies point out that nanoparticles prepared at the NaOH/Pt ratio of 84 do not grow further after attaining a certain particle size. For a NaOH to Pt ratio of 2, that means in acidic medium, particle formation should be dominated by growing processes and, therefore, larger particles are formed accompanied by a broader particle size distribution. The influence of PVP on the nanoparticle formation rate is relatively low. However, in acidic medium, the presence of PVP is necessary in order to protect the formed nanoparticles from irreversible aggregation reactions.     

Size-controlled synthesis of colloidal platinum nanoparticles and their activity for the electrocatalytic oxidation of carbon monoxide

Using polyvinylpyrrolidone (PVP) as a stabilizing agent, stable colloidal solutions of platinum nanoparticles of different size distributions have been prepared by reducing H2PtCl6 with hydrogen. The UV-vis adsorption peaks at 258 nm due to the adsorption of Pt(IV) species disappear completely, indicating that the Pt(IV) species has been used up and colloidal Pt has been formed. The electrodes have been prepared from aqueous Pt colloids and glassy carbon (GC). The effect of platinum particle size of Pt/GC catalyst electrode on the electrocatalytic oxidation of carbon monoxide has been investigated. The voltammetry shows that a higher potential is needed for the oxidation of absorbed carbon monoxide with a decrease of the platinum particle size for particle sizes larger than 1 nm. But for particle sizes smaller than 1 nm, the potential remains constant while the activity decreases with decreasing the size. The snowlike, well-dispersed, and highly ordered platinum nanoparticles demonstrate high activity in the oxidation reaction of carbon monoxide. The reason may be due to the geometric structure of platinum nanoparticles.     

Palladium(II) and platinum(II) complexes of 6-methyl-2-acetylpyridine 3-hexamethyleneiminylthiosemicarbazones: A structural and spectral study

The reaction of 6-methyl-2-acetylpyridine 3-hexamethyleneiminyl-thiosemicarbazone, H6MAchexim, with potassium tetrachloropalladate(II) and tetrachloroplantinate(II) in methanol afforded the complexes [Pd(6MAchexim)Cl] and [Pt(6MAchexim)Cl], respectively. The X-ray crystal structure determination of both shows that anions of H6MAchexim coordinate in a planar conformation to the central palladium(II) or platinum(II) via the pyridyl nitrogen, azomethine nitrogen and thiolato sulfur atoms. The complexes have also been characterized by spectroscopic techniques (IR, UV–VIS and ¹H NMR).     

Raman studies on the interaction of the reactants with the platinum nanoparticle surface during the nanocatalyzed electron transfer reaction

Raman studies are conducted to understand the specific interactions between the individual reactants and the platinum nanoparticle surface during the nanocatalyzed electron transfer reaction between hexacyanoferrate (III) ions and thiosulfate ions. When Pt nanoparticles are added to the thiosulfate ion solution, a shift in the symmetric SS stretching mode is observed compared to the frequency observed for the free thiosulfate ions in solution, suggesting that binding to the Pt nanoparticle surface occurs via the S- ion. It is also observed that there are no shifts in the symmetric and asymmetric OSO bending or SO stretching frequencies. This suggests that the thiosulfate ions do not bind to the nanoparticle surface via the O- ion. When platinum nanoparticles are added to the hexacyanoferrate(III) ion solution, evidence is found for both adsorbed hexacyanoferrate(III) ions and a platinum cyanide complex. For adsorbed hexacyanoferrate(III) ions, the CN stretching frequency is observed at 2101 cm(-1) and the Fe-C stretching frequency is found at 368 cm(-1). The observed CN stretching frequencies located at 2147 and 2167 cm(-1) provide strong evidence that there is a Pt(CN)4(2-) platinum cyanide complex formed. In addition, the Pt-CN band is also observed at 2054 cm(-1). These observed bands provide spectroscopic evidence that the hexacyanoferrate(III) ions dissolve by forming a complex with the surface platinum atoms of the nanoparticles. Raman spectra of the product mixtures are obtained after the completion of the reaction when carried out with higher reactant concentrations to observe the Raman spectra, but with a similar 10:1 ratio of thiosulfate to hexacyanoferrate(III) ions as used previously, with and without PVP-Pt nanoparticles at a correspondingly higher concentration. It is observed that there are no shifts in the characteristic Raman bands associated with hexacyanoferrate(II) ions and no evidence for the formation of adsorbed hexacyanoferrate(II) species or platinum cyanide complexes in the presence of the platinum nanoparticles. In addition, there is evidence for the shifted symmetric SS stretching mode, suggesting that some of the unreacted thiosulfate (present in large excess) is bound to the Pt nanoparticle surface. Thus, under the actual reaction conditions, the hexacyanoferrate(III) ions preferentially react with adsorbed thiosulfate ions to form the reaction products, and this supports the surface catalytic mechanism we proposed previously.     

Efficiency enhancement of methanol/ethanol oxidation reactions on Pt nanoparticles prepared using a new surfactant, 1,1-dimethyl heptanethiol

In this study, carbon-supported platinum nanoparticle catalysts were prepared using PtCl(4) and H(2)PtCl(6) as starting materials and 1-heptanethiol, 1,1-dimethyl heptanethiol, 1-hexadecanethiol and 1-octadecanethiol as surfactants. These nanoparticles can be used as catalysts for methanol and ethanol oxidation reactions in methanol and ethanol fuel cells. 1,1-Dimethyl heptanethiol was used for the first time in this type of synthesis; other surfactants were used to synthesize nanoparticles for comparison of the catalyst's performance. Cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM) were used to characterize the catalysts. It should also be stressed that AFM was employed for the first time in determining the surface topography of these catalysts. XRD, TEM and AFM height results indicate that the platinum crystallizes into a face-centered cubic structure and the surfactant plays an important role in determining the size of the platinum nanoparticles. XPS data revealed that the platinum was found in two different oxidation states, Pt(0) and Pt(IV) with a ratio of about 7.5:2.5, respectively. Electrochemical studies showed catalyst IIa to be the most active sample towards methanol/ethanol oxidation reactions (～342 A g(-1) Pt at 0.612 V for methanol (4.6 times more active than the commercial catalyst), ～309 A g(-1) Pt at 0.66 V for ethanol, (15.4 times more active than the commercial catalyst)).     

Platinum(IV) complexes with dipeptide. X-ray crystal structure, 195Pt NMR spectra, and their inhibitory glucose metabolism activity in Candida albicans

Three dipeptide complexes of the form K[Pt(IV)(dipep)Cl3] and two complexes of the form K[Pt(IV)(Hdipep)Cl4] were newly prepared and isolated. The platinum(IV) complexes containing the dipeptide were obtained directly by adding KI to H2[PtCl6] solution. The reaction using KI was rapidly completed and provided analytically pure yellow products in the form of K[Pt(dipeptide)Cl3] for H2digly, H2gly(alpha)-ala, H2alpha-alagly and H2di(alpha)-ala. The K[Pt(IV)(digly)Cl3] complex crystallizes in the monoclinic space group P2(1)/c with unit cell dimensions a = 10.540(3) A, b = 13.835(3) A, c = 8.123(3) A, beta = 97.01(2) degrees, Z = 4. The crystal data represented the first report of a Pt(IV) complex with a deprotonated peptide, and this complex has the rare iminol type diglycine(2-) coordinating to Pt(IV) with the bond lengths of the C2-N1 (amide) bond (1.285(13) A). The 195Pt NMR peaks of the K[Pt(IV)(dipep)Cl3] and the K[Pt(IV)(Hdipep)Cl4] complexes appeared at about 270 ppm and at about -130 ppm, respectively, and were predicted for a given set of ligand atoms. While the K[Pt(IV)(x-gly)Cl3] complexes, where x denotes the glycine or alpha-alanine moieties, were easily reduced to the corresponding platinum(II) complexes, the K[Pt(IV)(x-alpha-ala)Cl3] complexes were not reduced, but the Cl- ion was substituted for OH- ion in the reaction solution. The K[Pt(digly)Cl3] and K[Pt(gly-L-alpha-ala)Cl3] complexes inhibited the growth of Candida albicans, and the antifungal activities were 3- to 4-fold higher than those of cisplatin. The metabolism of glucose in C. albicans was strongly inhibited by K[Pt(digly)Cl3] and K[Pt(gly-L-alpha-ala)Cl3] but not by the antifungal agent fluconazole.     

Formation mechanism of Pt particles by photoreduction of Pt ions in polymer solutions

The formation mechanisms of metal particles (platinum (Pt) particles) in an aqueous ethanol solution of poly(N-vinyl-2-pyrrolidone) (PVP) by the photoreduction method have been studied by transmission electron microscopy (TEM) and in situ and ex situ X-ray absorption fine structure (XAFS) analysis. The average diameter of the dilute and concentrated Pt particles in the PVP solution is estimated from TEM to be 2.0 and 2.5 nm, respectively. XAFS analysis was performed for the reduction process of Pt4+ ions to metallic Pt particles for the Pt L3 edge of the colloidal dispersions of the concentrated Pt solutions. The photoreduction process proceeds by the following steps: (1) reduction of PtCl6(2-) to PtCl4(2-), (2) dissociation of Cl from PtCl4(2-), followed by reduction of Pt2+ ionic species to Pt0, (3) formation of a Pt0-Pt0 bond and particle growth by the association of Pt0-Pt0. The reduction of PtCl4(2-) to Pt0 is a slower process, compared with the reduction of PtCl6(2-) to PtCl4(2-). There is a delay between the disappearance of PtCl4(2-) and the formation of Pt0-Pt0 clusters.     

Single-crystal nanowires of platinum can be synthesized by controlling the reaction rate of a polyol process

Platinum nanowires of approximately 100 nm in length and approximately 5 nm in diameter have been synthesized by reducing H(2)PtCl(6) with ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP) and a trace amount of Fe(3+) or Fe(2+). The wires were generated at the final stage of the synthesis, which involved the formation of several intermediate species. The Fe(3+) or Fe(2+) ions had dual functions in the synthesis: they induced aggregation of Pt nanoparticles into larger structures that served as the nucleation sites, and they greatly reduced the reaction rate and supersaturation level to induce anisotropic growth. The reaction mechanism was studied by X-ray photoelectron spectroscopy (XPS) and UV-vis spectral analysis. The Pt nanowires could be readily separated from the surfaces of the agglomerates by sonication and obtained as pure samples by centrifugation.     

Furfuraldehyde hydrogenation on titanium oxide-supported platinum nanoparticles studied by sum frequency generation vibrational spectroscopy: Acid-base catalysis explains the molecular origin of strong metal-support interactions

This work describes a molecular-level investigation of strong metal-support interactions (SMSI) in Pt/TiO(2) catalysts using sum frequency generation (SFG) vibrational spectroscopy. This is the first time that SFG has been used to probe the highly selective oxide-metal interface during catalytic reaction, and the results demonstrate that charge transfer from TiO(2) on a Pt/TiO(2) catalyst controls the product distribution of furfuraldehyde hydrogenation by an acid-base mechanism. Pt nanoparticles supported on TiO(2) and SiO(2) are used as catalysts for furfuraldehyde hydrogenation. As synthesized, the Pt nanoparticles are encapsulated in a layer of poly(vinylpyrrolidone) (PVP). The presence of PVP prevents interaction of the Pt nanoparticles with their support, so identical turnover rates and reaction selectivity is observed regardless of the supporting oxide. However, removal of the PVP with UV light results in a 50-fold enhancement in the formation of furfuryl alcohol by Pt supported on TiO(2), while no change is observed for the kinetics of Pt supported on SiO(2). SFG vibrational spectroscopy reveals that a furfuryl-oxy intermediate forms on TiO(2) as a result of a charge transfer interaction. This furfuryl-oxy intermediate is a highly active and selective precursor to furfuryl alcohol, and spectral analysis shows that the Pt/TiO(2) interface is required primarily for H spillover. Density functional calculations predict that O-vacancies on the TiO(2) surface activate the formation of the furfuryl-oxy intermediate via an electron transfer to furfuraldehyde, drawing a strong analogy between SMSI and acid-base catalysis.     

Importance of platinum(II)-assisted platinum(IV) substitution for the oxidation of guanosine derivatives by platinum(IV) complexes

Guanosine derivatives with a nucleophilic group at the 5' position (G-5') are oxidized by the Pt (IV) complex Pt( d, l)(1,2-(NH 2) 2C 6H 10)Cl 4 ([Pt (IV)(dach)Cl 4]). The overall redox reaction is autocatalytic, consisting of the Pt (II)-catalyzed Pt (IV) substitution and two-electron transfer between Pt (IV) and the bound G-5'. In this paper, we extend the study to improve understanding of the redox reaction, particularly the substitution step. The [Pt (II)(NH 3) 2(CBDCA-O,O')] (CBDCA = cyclobutane-1,1-dicarboxylate) complex effectively accelerates the reactions of [Pt (IV)(dach)Cl 4] with 5'-dGMP and with cGMP, indicating that the Pt (II) complex does not need to be a Pt (IV) analogue to accelerate the substitution. Liquid chromatography/mass spectroscopy (LC/MS) analysis showed that the [Pt (IV)(dach)Cl 4]/[Pt (II)(NH 3) 2(CBDCA-O,O')]/cGMP reaction mixture contained two Pt (IV)cGMP adducts, [Pt (IV)(NH 3) 2(cGMP)(Cl)(CBDCA-O,O')] and [Pt (IV)(dach)(cGMP)Cl 3]. The LC/MS studies also indicated that the trans, cis-[Pt (IV)(dach)( (37)Cl) 2( (35)Cl) 2]/[Pt (II)(en)( (35)Cl) 2]/9-EtG mixture contained two Pt (IV)-9-EtG adducts, [Pt (IV)(en)(9-EtG)( (37)Cl)( (35)Cl) 2] and [Pt (IV)(dach)(9-EtG)( (37)Cl)( (35)Cl) 2]. These Pt (IV)G products are predicted by the Basolo-Pearson (BP) Pt (II)-catalyzed Pt (IV)-substitution scheme. The substitution can be envisioned as an oxidative addition reaction of the planar Pt (II) complex where the entering ligand G and the chloro ligand from the axial position of the Pt (IV) complex are added to Pt (II) in the axial positions. From the point of view of reactant Pt (IV), an axial chloro ligand is thought to be substituted by the entering ligand G. The Pt (IV) complexes without halo axial ligands such as trans, cis-[Pt(en)(OH) 2Cl 2], trans, cis-[Pt(en)(OCOCF 3) 2Cl 2], and cis, trans, cis-[Pt(NH 3)(C 6H 11NH 2)(OCOCH 3) 2Cl 2] ([Pt (IV)(a,cha)(OCOCH 3) 2Cl 2], satraplatin) did not react with 5'-dGMP. The bromo complex, [Pt (IV)(en)Br 4], showed a significantly faster substitution rate than the chloro complexes, [Pt (IV)(en)Cl 4] and [Pt (IV)(dach)Cl 4]. The results indicate that the axial halo ligands are essential for substitution and the Pt (IV) complexes with larger axial halo ligands have faster rates. When the Pt (IV) complexes with different carrier ligands were compared, the substitution rates increased in the order [Pt (IV)(dach)Cl 4] < [Pt (IV)(en)Cl 4] < [Pt (IV)(NH 3) 2Cl 4], which is in reverse order to the carrier ligand size. These axial and carrier ligand effects on the substitution rates are consistent with the BP mechanism. Larger axial halo ligands can form a better bridging ligand, which facilitates the electron-transfer process from the Pt (II) to Pt (IV) center. Smaller carrier ligands exert less steric hindrance for the bridge formation.     

Oxidation of dimethyldi(2-pyridyl)borato Pt(II)Me(n) complexes, n = 1, 0, with H2O2: tandem B-to-Pt methyl group migration and formation of C-O bond

New dimethyldi(2-pyridyl)borato (dmdpb) platinum(II) complexes, (dmdpb)Pt(II)Me(SMe(2)) (1), (dmdpb)Pt(II)(L)(SMe(2))(+), L = MeOH (2), MeCN (3), supported by dimethylsulfide ligand and featuring one (1) or no hydrocarbyls at the metal (2, 3) were prepared and their oxidation with hydrogen peroxide was studied. Both complex 1 bearing the formal charge of +1 on the metal and the methanol complex 2 capable of losing the proton of the methanol ligand to form the methoxide derivative 4 charged similarly to 1, are reactive towards H(2)O(2). However, the cationic complex 3 with a formal charge of +2 on the metal does not react with H(2)O(2). The oxidation of the monomethyl platinum(II) complex 1 leads to the B-to-Pt methyl transfer and formation of a robust dimethyl Pt(IV) species 5 which does not undergo C-O reductive elimination up to 100 °C. By contrast, oxidation of 2 in methanol-d(4) leads to quantitative formation of dimethyl ether-d(3), CD(3)OCH(3). It was presumed that the latter reaction involves the B-to-Pt methyl transfer and formation of a highly reactive cationic monomethyl Pt(IV) species whose methyl group carbon atom can accept nucleophilic attack by the methanol-d(4) solvent to form dimethyl ether-d(3).     

Initial nucleation of platinum clusters after reduction of K(2)PtCl(4) in aqueous solution: a first principles study

The initial nucleation of platinum clusters after the reduction of K(2)PtCl(4) in aqueous solution is studied by means of first principles molecular dynamics simulations. A reaction mechanism leading to a Pt dimer is revealed both by gas-phase simulations and by simulations which model the solution environment. The key step of the observed reaction process is the formation of a Pt-Pt bond between a Pt(I) complex and an unreduced Pt(II) complex. In light of this result, we discuss the reduction process leading to the formation of platinum nanoparticles. In the generally accepted model, the nucleation of Pt particles starts only when a critical concentration of Pt(0) atoms is reached. Here, we discuss a complementary mechanism where metal-metal bonds form between Pt complexes in higher oxidation states. This is consistent with a number of experimental results which show that a high concentration of zerovalent atoms is not necessary to start the nucleation.     

Novel synthetic approach to creating PtCo alloy nanoparticles by reduction of metal coordination nano-polymers

PtCo alloy nanoparticles with different metal elemental ratios (Pt/Co = 0.9, 1.6, 2.9, and 3.6) were prepared by a novel synthetic approach, using the transformation reaction of platinum(IV)/cobalt tetracyanoplatinate metal coordination nano-polymers (Pt(II)-CN-Pt(IV)/Co)via a H2 gas-phase reduction.     

Polymeric anionic networks using dibromine as a crosslinker; the preparation and crystal structure of [(C4H9)4N]2[Pt2Br10].(Br2)7 and [(C4H9)4N]2[PtBr4Cl2].(Br2)6

The reaction of M[PtX3(CO)] (M+ = [(C4H9)4N]+, X = Br, Cl) with an excess of Br2 gives the new platinum(IV) salts, [(C4H9)4N]2[Pt2Br10].(Br2)7, 1, and [(C4H9)4N]2[PtBr4Cl2].(Br2)6, 2, which, in the solid state, contain strong Br Br interactions resulting in the formation of polymeric networks; they could provide useful solid storage reservoirs for elemental bromine.     

Morphology of nanostructured platinum in mesoporous materials-effect of solvent and intrachannel surface

An intrachannel surface of host silica was functionalized through the reaction of surface silanol groups with silanes to generate a monolayer of positively charged groups, and together with the strongly adsorbed and negatively charged PtCl6(2-), resulting in nanostructured platinum-mesoporous silica composites. The highly dispersed Pt nanoparticles and nanonetworks are fabricated from (CH3O)3Si(CH2)3N(CH3)3+Cl- functionalized mesoporous silica MCM-48 with H2PtCl6 in ethanol and water solvent, and characterized by PXRD, XAS, TEM, and N2 adsorption. The solvent of H2PtCl6 solution is found to affect the mobility of Pt precursors and the resulting morphology of nanostructured metallic Pt. The effect of the intrachannel surface properties on the incorporation and the morphology of nanostructured Pt on the deposition of Pt(NH3)4Cl2 and H2PtCl6 on Al-doped or C-coated mesoporous silica MCM-41 is also studied relative to that on pure silica MCM-41.     

Towards a better understanding of the cisplatin mode of action

We have studied how platinum(II) complexes [Pt(dien)Cl]Cl, [Pt(en)Cl2] and cisplatin react with hybrid molecules that contain sulfur and nitrogen ligands, in particular Phac-Met-linker-p5'dG (Phac = phenylacetyl), Phac-His-linker-p5'dG, Phac-His-Met-linker-p5'dG and Phac-His-Gly-Met-linker-p5'dCATGGCT. The progress of the reactions was monitored by HPLC, and by [1H,15N]-HSQC NMR when 15N-cisplatin was used. The products were isolated and characterised by using enzymatic and chemical reactions and spectroscopic techniques (UV and/or NMR spectroscopy, electrospray or MALDI-TOF mass spectrometry). The combined use of digestion with proteases and reaction with hydrogen peroxide followed by mass spectrometric analysis indicated the platinum coordination positions on the peptide moiety of the largest hybrid. Monofunctional Pt-S adducts were transformed into Pt-N complexes in which Pt-N7 bonds were formed preferentially. Most of the chelates isolated had Pt-S bonds, and, in the case of cisplatin complexes, loss of the ammine trans to sulfur gave rise to the formation of tricoordinate species with platinum-mediated peptide-nucleotide cross-links. 1,2-Intrachain platinum GpG adducts were only obtained in very small amounts (1-4%).     

Probing the interaction of poly(vinylpyrrolidone) with platinum nanocrystals by UV-Raman and FTIR

The vibrational spectra of platinum nanoparticles (2.4-9 nm) capped with poly(N-vinylpyrrolidone) (PVP) were investigated by deep UV-Raman and FTIR spectroscopy and compared with those of pure PVP. Raman spectra of PVP/Pt show selective enhancement of C=O, C-N, and CH2 vibrational modes attributed to the pyrrolidone ring. Selective enhancement of ring vibrations is attributed both to the resonance Raman effect and SERS chemical enhancement. A red shift of the PVP carbonyl frequency on the order of 60 cm-1 indicates the formation of strong >C=O-Pt bonds. It is concluded that PVP adheres to the nanoparticles through a charge-transfer interaction between the pyrrolidone rings and surface Pt atoms. Heating the Pt nanoparticles under reducing conditions initiates the decomposition of the capping agent, PVP, at a temperature 100 degrees C below that of pure PVP. Under oxidizing conditions, both PVP/Pt and PVP degrade to form amorphous carbon.     

Preparation of platinum nanoparticles using star-block copolymer with a carboxylic core

Well-defined star polymers containing a functionalized core supply a molecular nanocavity and may be used to control formation of inorganic nanoparticles. Herein, platinum (Pt) nanoparticles of 2-4 nm were prepared by using (poly(acrylic acid)-b-polystyrene)6 (PAA-b-PS)6 amphiphilic star block copolymer as a novel single molecular stabilizer. This PAA core functionalized star polymer was obtained by hydrolysis of (poly(tert-butyl acrylate)-b-polystyrene)6 (PtBA-b-PS)6, which was synthesized by sequential atom transfer radical polymerization (ATRP) of tert-butyl acrylate and styrene with an initiator bearing six 2-bromoisobutyloxyl groups. Pt(IV) ions were loaded by ion exchange to the core of the star polymer and Pt nanoparticle stabilized by single star polymer was produced by a reduction with NaBH4.     

Synthesis of platinum nanoparticles by reaction of filamentous cyanobacteria with platinum(IV)-chloride complex

Interaction of cyanobacteria (Plectonema boryanum UTEX 485) with aqueous platinum(IV)-chloride (PtCl(4) degrees ) has been investigated at 25-100 degrees C for up to 28 days, and 180 degrees C for 1 day. The addition of PtCl(4) degrees to the cyanobacteria culture initially promoted the precipitation of Pt(II)-organic material as amorphous spherical nanoparticles (< or =0.3 microm) in solutions and dispersed nanoparticles within bacterial cells. The spherical Pt(II)-organic nanoparticles were connected into long beadlike chains by a continuous coating of organic material derived from the cyanobacterial cells, and aged to nanoparticles of crystalline platinum metal with increase in temperature and reaction time. The stepwise reduction for the formation of platinum nanoparticles in the presence of cyanobacteria was deduced to be Pt(IV) [PtCl(4) degrees ] --> Pt(II) [Pt(II)-organics] --> Pt(0). Spherical platinum-bearing nanoparticles were not present in abiotic PtCl(4) degrees experiments conducted under similar conditions and duration.