Thermally induced mode coupling in rare-earth doped fiber amplifiers

We present a simple semianalytical model of thermally induced mode coupling in multimode rare-earth doped fiber amplifiers. The model predicts that power can be transferred from the fundamental mode to a higher-order mode when the operating power exceeds a certain threshold, and thus provides an explanation of recently reported mode instability in such fiber amplifiers under high average-power operation. We apply our model to a simple step-index fiber design, and investigate how the power threshold depends on various design parameters of the fiber.     

Analytical solutions to rate equations including losses describing threshold pumped fiber lasers

An exact analytical expression to the threshold pump power has been deduced for rate equations including loss coefficients applicable to fiber lasers doped with quasi two-energy-level ions. Following the derivation of a closed-form expression for the variation of the pump power along the fiber, together with analytical solutions to the position dependent atom population density and laser power in terms of the pump power, we have analytically and fully solved rate equations describing threshold pumped fiber lasers. A comparison has also been made between the exact analytical result with the previous reported results, which indicates that various approximation have underestimated the threshold pump powers.     

熔锥型侧面泵浦耦合器的研究

 现在高功率光纤激光器和光纤放大器采用的双包层掺杂光纤,相对于从半导体泵浦激光器发射出的多模泵浦光束的大发散角,其内包层的直径很小,因此把泵浦光有效地耦合到双包层掺杂光纤的内包层是一个急需解决的难题。研制一种熔锥型侧面泵浦耦合器,可以大幅度提高泵浦光功率,实现增益光纤的多点泵浦,在双包层光纤放大器中使用良好,安全稳定,实现了较高的耦合效率,达到了70%,信号光通过率98%,信号输入与泵浦输入的隔离度大于50 dB,泵浦输入对输出端反向传输光的隔离度27 dB。通过对比结构紧凑性、耦合效率、系统稳定性等相关指标发现,熔锥型侧面泵浦耦合器完全可以满足高功率光纤激光器和光纤放大器的使用要求。     

Compact in-fiber mode adapter based on double-cladding fiber for multimode fiber access networks

A simple method for coupling light from a laser diode (LD) to multimode fiber (MMF) by using a compact in-fiber mode adapter, which is constructed with double-cladding fiber is presented, for the first time. Strong cladding-mode resonance across the thin-thickness inner cladding is used to excite the cladding modes. Principle of proposed mode adapter is theoretically investigated and its performances are experimentally verified by measurement results. By comparing the direct connection between LD and MMF, the coupling efficient of transmission power is improved by using our proposed adapter.     

Spliced-fiber mode filter for 1060-nm single-mode transmission

We present a novel mode filter operating for the 1060-nm band, which selectively removes the power of the high-order mode (HOM) from a conventional single-mode fiber (C-SMF) that supports two modes at the short-wavelength band. Our mode filter is fabricated very easily by fusion-splicing a short section of short-wavelength single-mode fiber in the middle of the C-SMF link. By using our spliced-fiber mode filter (SF-MF), a high HOM suppression performance of > 18 dB has been achieved with a low insertion loss of < 0.3 dB over the full band of optical communications from 1050 nm to 1650 nm. We have also developed a new mode power measurement scheme that takes advantage of the bending sensitivity of the HOM guidance. This measurement scheme enabled us to evaluate accurately the performance factors of the fabricated mode filter.     

An efficient shooting method for fiber amplifiers and lasers

A simple shooting method is proposed for the design of distributed multi-pumped Raman fiber amplifiers (RFAs) and Yb-doped double-clad fiber lasers (DCFLs). Using the proposed method a distributed RFA with 10 pump sources and 1700 mW total input pump power is simulated and high-power Yb-doped DCFL rate equations are solved numerically. The numerical simulation results show that the proposed method has good convergence in the condition of increasing numbers and power of input pump sources.     

Peak-power limits on fiber amplifiers imposed by self-focusing

We have numerically investigated the behavior of the fundamental mode of a step-index, multimode (MM) fiber as the optical power approaches the self-focusing limit (P(crit)). The analysis includes the effects of gain and bending (applicable to coiled fiber amplifiers). We find power-dependent, stationary solutions that propagate essentially without change at beam powers approaching P(crit) in straight and bent fibers. We show that in a MM fiber amplifier seeded with its fundamental eigenmode at powers 相似文献   

占空比对光子晶体光纤激光器性能的影响

 在传统光纤激光器工作原理的基础上,考虑光子晶体光纤(PCF)模场分布特征,给出了连续泵浦情况下单模PCF激光器的速率方程和功率传输方程。利用该方程对掺镱单模PCF激光器的性能进行了数值模拟研究。结果表明：虽然空气占空比大小对PCF激光器的输出功率、泵浦阈值和斜率效率等影响不显著,但对拉曼非线性阈值影响却很大。当泵浦功率小于拉曼非线性阈值时,激光器主要输出信号激光;当超过拉曼阈值且在较宽的范围内,激光器同时输出功率相近的信号激光和拉曼光。基于这种效应,提出一种由泵浦功率控制的双波长光纤激光器的新思路。考虑到PCF非线性系数的可调控特性,采用不同光纤有可能在较宽的功率范围获得双波长激光振荡。     

三能级光纤激光器速率方程组的阈值解析解

 在考虑了泵浦损耗及激光损耗的情况下，解析求解了阈值泵浦下的三能级光纤激光器速率方程组，获得了泵浦功率阈值的显函数解析表达式，泵浦功率沿光纤变化的隐函数表达式，以及用功率变化表示的各个能级的粒子数密度随位置变化的显函数表达式。并利用这些表达式对光纤激光器的阈值特性进行了研究，研究表明：泵浦功率阈值随泵浦损耗系数增大而增大；激光上能级粒子数密度随归一化位置呈下降趋势，而下能级粒子数密度的变化与此相反；泵浦功率阈值越大(光纤长度越长),净增益系数随归一位置下降就越快。所获得的结果适用于单包层和双包层光纤激光器。     

LD泵浦掺镱双包层光纤激光器的理论研究

对线形腔LD泵浦掺镱的双包层光纤激光器进行研究,通过数值模拟,分析了不同泵浦方式下的泵浦光、激光输出功率和增益特性在光纤中的分布。结果表明,单端后向泵浦输出功率率较高,对于小功率光纤激光器则是最佳选择。进一步又研究了单端后向对称泵浦输出功率与光纤长度及腔镜反射率的影响,为提高光纤激光器的输出功率提供了理论和实验依据。     

976 nm激光抽运二氧化硅微球级联拉曼散射激光的研究

利用电极放电产生的电弧高温熔融二氧化硅单锥细纤, 熔融的二氧化硅在表面张力作用下形成表面光滑的微球, 完成高品质因子微球腔的制备. 将976 nm激光通过锥光纤以倏逝场方式高效耦合入微球, 研究具有高能量密度回廊模的微球腔中的三阶非线性现象——受激拉曼散射现象. 在实验中测得了六级级联的拉曼散射激光, 各级拉曼散射激光分别测得单纵模或多纵模; 在抽运光功率不少于582.6 μW时, 测得位于1200 nm附近的拉曼散射激光; 当抽运光功率为3.014 mW时, 测得位于1287.04 nm附近的第六级拉曼散射激光. 关键词： 微球腔 锥光纤 高品质因子 拉曼散射激光     

掺铒光纤激光器输出特性的解析研究

从描述掺铒光纤激光器的速率方程组出发，对９８０ｎｍ和１４８０ｎｍ波段泵浦下掺铒光纤激光器的输出特性进行了解析研究，得到了这两个波段泵浦下下输出功率，斜效率等重要参烽的隐式或显示解析表达式。     

A Theory of the Multimode Resonant Raman Scattering Compared with the Experiment

The dynamics of the Resonant Raman Scattering (RRS) of multimode broadband lasers is described and resolved without neglecting the phase and cavity effects. The multimode pump structure leads to an equivalent Raman structure by mixing interaction. When the stokes and the pump modes have the same phase, the forward multimodal Raman scattering shows a gain equivalent to the gain of a single mode pump with an equivalent mean power, so that in a Raman resonator the Raman modes can be synchronously amplified to the saturated power until the de phasing destroys the Raman conversion. All these effects have been experimentally observed. Besides an incoherent scattering process is always present in competition with the coherent one.     

High-power multi-mode laser to single-mode pump conversion

A novel pump-sharing module for multi-channel amplifiers based on integration of high-power multimode semiconductor lasers and planar waveguide circuits is proposed. The feedback-free modules are designed for optimum coupling, throughput and power uniformity on silicon using BPM method and fabricated via the sol-gel process of photo patternable precursors. Modal properties of the multimode lasers are considered by studying spectrum and spatial distribution of laser output power at different temperatures. Employing an 1500 mW 980 nm multimode laser (TE polarized), via lens and Butt coupling up to 1250 mW of laser output is coupled into the multimode channel waveguides, which are tapered and branched to four single mode waveguides. The measured pump power from splitter outputs, randomly polarized, exceeds 600 mW. At constant temperatures ranging from 22 °C to 30 °C, the pump-sharing modules exhibit good stability with a power uniformity of <0.5 dB over hours.     

一维随机激光器中准态模的饱和特性研究

针对随机激光器的半经典理论是应用电磁场时域有限差分法数值求解半经典随机激光模型方程组，基于半经典理论数值研究了一维随机激光器中准态模式的饱和特性，获得了不同准态模的空间分布和频谱分布图。计算结果分析显示：准态模式的某些特征参数如局域程度将会影响系统的饱和特性。利用这一结果，可以通过单频抽运方法选择具有低阈值、高饱和强度的准态模式作为整个激光系统的稳态输出模式。     

Efficient single-mode operation of a cladding-pumped ytterbium-doped helical-core fiber laser

A novel approach to achieving robust single-spatial-mode operation of cladding-pumped fiber lasers with multimode cores is reported. The approach is based on the use of a fiber geometry in which the core has a helical trajectory within the inner cladding to suppress laser oscillation on higher-order modes. In a preliminary proof-of-principle study, efficient single-mode operation of a cladding-pumped ytterbium-doped helical-core fiber laser with a 30 microm diameter core and a numerical aperture of 0.087 has been demonstrated. The laser yielded 60.4 W of output at 1043 nm in a beam with M2 < 1.4 for 92.6 W launched pump power from a diode stack at 976 nm. The slope efficiency at pump powers well above threshold was approximately 84%, which compares favorably with the slope efficiencies achievable with conventional straight-core Yb-doped double-clad fiber lasers.     

Multimode fiber laser beam cleanup based on stochastic parallel gradient descent algorithm

We present experimental research on multimode fiber laser beam cleanup based on a stochastic parallel gradient descent (SPGD) algorithm. The multimode laser is obtained by injecting a 1064 nm central wavelength single mode fiber laser into a multimode fiber and the system is setup by using phase only liquid crystal spatial light modulators (LC-SLM). The quality evaluation function is increased by a factor of 10.5 and 65% of the laser energy is encircled in the central lobe when the system evolves from open-loop into close-loop state. Experimental results indicate the feasibility of the multimode fiber laser beam cleanup by adaptive optics (AO).     

LD泵浦掺铥(Tm3+)光纤激光器的数值分析

首先从掺铥光纤激光器的速率方程和光传输方程出发,建立数学模型,通过Matlab软件进行数值计算,分析了泵浦光和激光沿光纤的分布以及各能级离子数的变化.在不同掺杂浓度下,研究了小信号增益与入纤泵浦功率的关系以及泵浦光和激光功率与增益介质长度的关系.在不同泵浦功率下,研究了输出功率与输出耦合镜反射率的关系.进一步对不同泵浦吸收系数,研究了斜率效率和泵浦阈值与光纤长度的关系.分析结果表明存在最佳光纤长度和最佳耦合输出透过率,使得激光输出功率达到最佳值.     

Global rate equation description of a laser

The global integro-differential rate equations describing a multimode laser are analyzed. Expressions for the relaxation oscillation frequencies and their damping rates in the single-mode and two-mode regimes are obtained without specifying either the cavity geometry or the longitudinal pump profile. On the same level of generality, we prove the existence of universal relations relating the peaks of the power spectra in the two-mode regime. For a Fabry-Perot with arbitrary longitudinal pump profile, series expansions of all the physical functions are derived in powers of the pump moments. These moments are averages of the pump profile over cavity modes at linear combinations of the lasing frequencies and their harmonics. These results apply to end-pumped and/or partially filled lasers. For a single mode Fabry-Perot laser, we prove that the contribution to the steady state intensity from the lasing mode varies from 75% close to the lasing threshold to zero at high intensity. The remainder comes from the harmonics of the lasing mode. Analyzing the steady state single mode intensity equation in terms of the pump gratings, we prove that close to the lasing threshold only the space average of the pump and its grating oscillating at twice the lasing wave number do not vanish. This provides a hint towards the justification of the usual modal rate equations which retain only these two functions in the dynamical evolution of a laser. For a Fabry-Perot with constant pump profile, an exact expression for the upper boundary of the stable single mode regime is derived. In that two-mode regime, we prove that there is a critical value of the pump at which the ratio of the two relaxation oscillation frequencies is 2, leading to an internal resonance.     

强泵浦下掺Yb3+双包层光纤激光器输出特性数值分析和实验研究

对强泵浦下线形腔掺Yb3+双包层光纤激光器输出特性进行了理论和实验研究。通过数值模拟,分析了泵浦光及激光在光纤中的分布、输出功率与泵浦功率的关系、光纤长度及腔镜反射率对激光输出功率的影响。在实验中,利用D型掺Yb3+双包层光纤获得了输出功率10 6W的光纤激光输出,斜率效率达86%。测量了在不同输出耦合条件下的输出功率、阈值泵浦功率和斜率效率,理论分析与实验结果基本一致,为进一步提高光纤激光器功率提供了理论和实验依据。