Amperometric biosensor based on immobilization of acetylcholinesterase via specific binding on biocompatible boronic acid-functionalized Fe@Au magnetic nanoparticles

A new method based on specific binding between glycoprotein acetylcholinesterase and boronic acid-functionalized Fe@Au magnetic nanoparticles was presented for the development of acetylcholinesterase biosensor. Alginate–graphene composite-modified electrode was firstly prepared as the substrate. Then, biocompatible boronic acid-functionalized Fe@Au magnetic nanoparticles were anchored by the covalence between the cis-diol of alginate and the boronic acid group on Fe@Au nanoparticles. Acetylcholinesterase was subsequently immobilized via the bonding between the glycosyl of acetylcholinesterase and the boronic acid group. The immobilized enzyme retained relatively high bioactivity and the fabricated biosensor exhibited high sensitivity and fast response to acetylthiocholine chloride. Based on enzyme inhibition, carbamate pesticide was detected using Furadan as a model compound. Two linear ranges of 0.05–15 and 15–400?ppb were obtained with a detection limit of 0.01?ppb. The biosensor also showed acceptable reproducibility and relatively good storage stability. Moreover, satisfactory results were obtained in the real sample analysis.     

Spectrophotometric and colorimetric determination of gallium (III) with p-aminohippuric acid-functionalized citrate capped gold nanoparticles

A new technique for sensing Ga(III) concentration based on polyvinyl alcohol-citrate capped gold nanoparticle– p- aminohippuric acid hybrid (or three-layer core-shell configurations) has been demonstrated. The p- aminohippuric acid capped citrate-gold nanoparticles were comfortably agglomerated in the presence of Ga(III), and the color of the reaction quickly turned from red to violet or blue. Under the detection conditions, a good linear relationship was ideally obtained between the ratio of the absorbance intensity at 620 nm to that at 520 nm (A₆₂₀/A₅₂₀). The linear response range, the detection, and quantification limit was 34.9–418.3 μg/L and 7.6 μg/L, and 25 μg/L, respectively. To reflect the accuracy, the developed sensing approach was evaluated against certified reference materials (TMDA 51.3 fortified water and TMDA 28.3 fortified water). This colorimetric strategy was displayed excellent selectivity for Ga(III) over other examined ions. Additionally, the colorimetric method was properly used to detect the concentrations of Ga in tap water and certified reference material samples with recoveries ranging from 95.4 to 102.0%, displaying that the colorimetric procedure could be safely used for a realistic application.     

Direct electrochemical detection of kanamycin based on peroxidase-like activity of gold nanoparticles

An enzyme-free, ultrasensitive electrochemical detection of kanamycin residue was achieved based on mimetic peroxidase activity of gold nanoparticles (AuNPs) and target-induced replacement of the aptamer. AuNPs which were synthesized using tyrosine as a reducing and capping agent, exhibited mimetic peroxidase activity. In the presence of kanamycin-specific aptamer, however, the single-stranded DNA (ssDNA) adsorbed on the surface of AuNPs via the interaction between the bases of ssDNA and AuNPs, and therefore blocked the catalytic site of AuNPs, and inhibited their peroxidase activity. While in the presence of target kanamycin, it bound with the adsorbed aptamer on AuNPs with high affinity, exposed the surface of AuNPs and recovered the peroxidase activity. Then AuNPs catalyzed the reaction between H₂O₂ and reduced thionine to produce oxidized thionine. The latter exhibited a distinct reduction peak on gold electrode in differential pulse voltammetry (DPV), and could be utilized to quantify the concentration of kanamycin. Under the optimized conditions, the proposed electrochemical assay showed an extremely high sensitivity towards kanamycin, with a linear relationship between the peak current and the concentration of kanamycin in the range of 0.1–60 nM, and a detection limit of 0.06 nM. Moreover, the established approach was successfully applied in the detection of kanamycin in honey samples. Therefore, the proposed electrochemical assay has great potential in the fields of food quality control and environmental monitoring.     

Colorimetric assay for mercury (II) based on mercury-specific deoxyribonucleic acid-functionalized gold nanoparticles

A colorimetric nanoprobe-mercury-specific DNA-functionalized gold nanoparticles (Au-MSD) was developed for sensing Hg(2+). The new mercury-sensing concept relies on measuring changes in the inhibition of "non-crosslinking" aggregation of Au-MSD-induced by the folding of mercury-specific DNA strand through the thymine-Hg(2+)-thymine (T-Hg(2+)-T) coordination. In the absence of Hg(2+), a high concentration of MgCl(2) (50 mM) results in a rapid aggregation of Au-MSD because of the removal of charge repulsion. When Hg(2+) is present, the particles remain stable due to the folding of MSD functionalized on the particle surface. The assay enables the colorimetric detection of Hg(2+) in the concentration range of 0.1-10 μM Hg(2+) ions with a detection limit of 60 nM, and allows for the selective discrimination of Hg(2+) ions from the other competitive metal ions. Toward the goal for practical applications, the sensor was further evaluated by monitoring Hg(2+) in fish tissue samples.     

Chemiluminescence detection of label-free C-reactive protein based on catalytic activity of gold nanoparticles

A novel, quantitative analytical method for measuring C-reactive protein (CRP) levels in human serum has been developed based on the catalytic activity of gold nanoparticles (GNPs) and luminol-H₂O₂ chemiluminescence (CL). The CL intensity in the presence of CRP and its ligand, O-phosphorylethanolamine (PEA), was greatly enhanced due to the aggregation of GNPs after the addition of 0.5 M NaCl. Any pretreatment steps, such as covalent functionalization of GNPs, addition of antibodies, or labeling of CRP, were not needed for CL detection. The CL enhancement was linearly proportional to CRP concentration in the range of 1.88 fM to 1.925 pM. The detection limit of CRP in serum samples was estimated to be as low as 1.88 fM. The detection sensitivity was increased more than 164 times of magnitude over that of the conventional, enzyme-linked immunosorbent assay (ELISA) method. This proposed GNP-based CL detection method offers the advantages of simplicity, rapidity, and sensitivity.     

Colorimetric detection of apoptosis based on caspase-3 activity assay using unmodified gold nanoparticles

A new label-free method for the detection of apoptosis was proposed based on colorimetric assay of caspase-3 activity using an unlabeled Asp-Glu-Val-Asp (DEVD)-containing peptide substrate and unmodified gold nanoparticles (AuNPs).     

Tunable inhibition and denaturation of alpha-chymotrypsin with amino acid-functionalized gold nanoparticles

Water-soluble gold nanoparticles bearing diverse l-amino acid terminals have been fabricated to probe the effect of receptor surface on protein surface binding. The interaction of these nanoparticles with alpha-chymotrypsin (ChT) was investigated by activity assay, gel electrophoresis, zeta-potential, circular dichroism, and fluorescence spectroscopy. The results show that both electrostatic and hydrophobic interactions between the hydrophobic patches of receptors and the protein contribute to the stability of the complex. The microscopic binding constants for these receptor-protein systems are 10(6)-10(7) M(-1), with the capacity of the nanoparticle receptors to bind proteins determined by both their surface area and their surface charge density. Furthermore, it is found that the hydrophilic side chains destabilize the ChT structure through either competitive hydrogen bonding or breakage of salt bridges, whereas denaturation was much slower with hydrophobic amino acid side chains. Significantly, correlation between the hydrophobicity index of amino acid side chains and the binding affinity and denaturation rates was observed.     

Colorimetric detection of sulfide based on target-induced shielding against the peroxidase-like activity of gold nanoparticles

Colorimetric recognition and sensing of sulfide with high sensitivity was proposed based on target-induced shielding against the peroxidase-like activity of bare gold nanoparticles. Significant features of the new assay system are its simplicity and cost-effectiveness. The recognition of sulfide by bare gold nanoparticles can be fulfilled in a few seconds and the assay can be accomplished in about 10 min. Furthermore, the new assay system does not require surface modification of GNPs to obtain the specificity for sulfide, and a salt-induced aggregation step is not needed. The detection limit of this method for sulfide was 80 nM. These features make this sensor a potentially powerful tool for the quantitative determination of sulfide in water samples.     

Phosphonic and sulfonic acid-functionalized gold nanoparticles: a solid-state NMR study

Gold nanoparticles capped with 11-mercaptoundecanylphosphonic acid (MUP) and sodium 10-mercaptodecanesulfonic acid (MDS) were characterized by a range of techniques which included solid-state 31P and 13C NMR spectroscopies. Despite similar core sizes and alkyl chain lengths, the conformational and dynamic properties of the capping ligands are very different for the two types of nanoparticles. Whereas MDS produces disordered monolayers on planar gold surfaces, the MDS-capped nanoparticles show a high degree of chain order with the onset of reversible chain disordering occurring just above room temperature. The alkyl chains of MUP adsorbed on the gold nanoparticles are more ordered and motionally restricted than the unbound solid surfactant due to strong intramonolayer and interparticle hydrogen bonds. This conformational order is thermally stable, and disordering only occurs upon decomposition and desorption of MUP from the gold core. Solid-state 31P NMR has been demonstrated to be a sensitive probe of the interactions of the PO3H2 terminal groups.     

Homogeneous immunoassay based on gold nanoparticles and visible absorption detection

A sensitive homogeneous immunoassay, using human serum albumin (HSA) as a model analyte coupled with simple visible absorption detection, has been developed. The new assay is based on the use of gold nanoparticles functionalized with the target protein, which compete with the analyte for the binding of a specific polyclonal antibody. The binding of antibodies to the functionalized nanoparticles determines a shift of the visible absorption maximum of the gold colloid, and quantification of the analyte could be obtained as the competitive inhibition of the binding of antibodies to the nanoparticles. The proposed immunoassay has been optimized and successfully applied to measuring HSA in human urine samples, in which results agreed well with those obtained by a nephelometric reference method.     

Colorimetric detection of D-amino acids based on anti-aggregation of gold nanoparticles

A new method has been proposed to realize the visual detection of D-amino acids(DAAs) via the antiaggregation of 4-mercaptobenzoic acid modified gold nanoparticles(AuNPs) in the presence of D-amino acid oxidase(DAAO). The negatively charged AuNPs were prepared using sodium citrate as a reducer and stabilizer. The presence of 4-mercaptobenzoic acid(4-MBA) and Cu2+induces the aggregation of AuNPs,resulting in a color change from ruby red to royal purple. However, DAAO could oxidize DAAs to generate H2O2. In the presence of H2O2, the mercapto(–SH) group in 4-mercaptobenzoic acid can be oxidized to form a disulfide(–S–S–) bond. Based on these facts, the pre-incubation of DAAs and 4-mercaptobenzoic acid with DAAO would significantly reduce the concentration of free 4-mercaptobenzoic acid molecules,thus the aggregation of AuNPs was interrupted since due to the lack of inducer. As the concentration of DAAs increases, the color of the AuNPs solution would progress from royal purple to ruby red.Consequently, DAAs could be monitored by the colorimetric response of AuNPs using a UV–vis spectrophotometer or even naked eyes. This DAAO mediated visual detection method could determine Dalanine(D-Ala) as a representative DAA with concentrations ranging from 1.5×10~(-7)mol L~(-1) to 3.0×10~(-5)mol L~(-1), and the detection limit was as low as 7.5×10~(-8)mol L~(-1). The proposed method is convenient, low-cost and free of complex equipment, making it feasible to analyze the concentration of D-Ala in real samples of b-amyloid peptide(Aβ1–42).     

Electrochemical impedance spectroscopy detection of lysozyme based on electrodeposited gold nanoparticles

A simple, highly sensitive, and label-free electrochemical impedance spectroscopy (EIS) aptasensor based on an anti-lysozyme-aptamer as a molecular recognition element, was developed for the detection of lysozyme. Improvement in sensitivity was achieved by utilizing gold nanoparticles (AuNPs), which were electrodeposited onto the surface of a gold electrode, as a platform for immobilization of the aptamer. To quantify the amount of lysozyme, changes in the interfacial electron transfer resistance (R_et) of the aptasensor were monitored using the redox couple of an [Fe(CN)₆]^3−/4− probe. The R_et increased with lysozyme concentration. The plot of R_et against the logarithm of lysozyme concentration is linear over the range from 0.1 pM to 500 pM with a detection limit of 0.01 pM. The aptasensor also showed good selectivity for lysozyme without being affected by the presence of other proteins.     

Colorimetric detection of DNA by modulation of thrombin activity on gold nanoparticles

A colorimetric, non-cross-linking aggregation-based gold-nanoparticle (AuNP) probe has been developed for the detection of DNA and the analysis of single-nucleotide polymorphism (SNP). The probe acts by modulating the enzyme activity of thrombin relative to fibrinogen. A thrombin-binding aptamer with a 29-base-long oligonucleotide (TBA(29)) assembled on the nanoparticles (TBA(29)-AuNPs) through sandwich DNA hybridization was found to possess ultra-high anticoagulant potency. The enzyme inhibition of thrombin was determined by thrombin-induced aggregation of fibrinogen-functionalized 56 nm AuNPs (Fib-AuNPs). The potency of the inhibition of TBA(29)-AuNPs relative to thrombin--and thus the degree of aggregation of the Fib-AuNPs--is highly dependent on the concentration of perfectly matched DNA (DNA(pm)). Under optimal conditions [Tris-HCl (20 mM, pH 7.4), KCl (5 mM), MgCl(2) (1 mM), CaCl(2) (1 mM), NaCl (150 mM), thrombin (10 pM), and TBA(29)-AuNPs (20 pM)], the new TBA(29)-AuNP/Fib-AuNP probe shows linear sensitivity to DNA(pm) in the concentration range 20-500 pM with a correlation coefficient of 0.96. The limit of detection for DNA(pm) was experimentally determined to be 12 pM, based on a signal-to-noise ratio (S/N) of 3. The new probe was successfully applied to the analysis of an SNP that is responsible for sickle cell anemia. Relative to conventional molecular-beacon-based probes, the new probe offers the advantages of higher sensitivity and selectivity towards DNA and lower cost, showing its great potential for practical studies of SNPs.     

金纳米粒子的表面等离子体共振吸收光度法研究和分析应用

在阴离子表面活性剂十二烷基苯磺酸钠存在下的水溶液中，基于金纳米粒子产生的表面等离子体共振吸收的原理，提出了一个分光光度方法。结果表明在524nm处的共振吸收强度与金质量浓度在2．4-120μg/mL范围内服从比尔定律。其线性回归方程为：c＝55．58A 0．78，相关系数为0．9998。方法适用于载金炭中的金分析。     

纳米金比色法测定多西环素和土霉素

采用柠檬酸钠还原法合成粒径约13nm的纳米金粒子.采用紫外-可见分光光度计、荧光分光光度计研究了纳米金粒子与多西环素/土霉素分子的相互作用;通过改变缓冲溶液、纳米金粒子用量、反应时间确定了比色法测定的最优反应条件.结果表明:在弱酸溶液中,多西环素/土霉素分子中的氨基官能团(-NH_2)得到电子成为带电基团(-NH_3~+)并通过静电引力与纳米金粒子结合,使得纳米金粒子发生聚集,导致纳米金吸收光谱发生红移和展宽,颜色由酒红色变成蓝色;在盐酸-柠檬酸钠的缓冲溶液中加入2mL纳米金,反应时间为10min的条件下测得多西环素和土霉素的线性范围分别为0.06~0.66mg·L~(-1)和0.59~8.85 mg·L~(-1),检出限(3σ)分别为0.008 6、0.083 8mg·L~(-1).该方法前处理简单、灵敏、可靠,有望应用于食品分析和临床分析等领域.     

A label-free electrochemical immunosensor based on gold nanoparticles for detection of paraoxon

An electrochemical immunosensor for the direct determination of paraoxon has been developed based on the biocomposites of gold nanoparticles loaded with paraoxon antibodies. The biocomposites are immobilized on the glassy carbon electrode (GCE) using Nafion membrane. On the immunosensor prepared paraoxon shows well-shaped CV with reduction and oxidation peaks located −0.08 and −0.03 mV versus SCE, respectively. The detection of paraoxon performed at −0.03 mV is beneficial for guaranteeing sufficient selectivity. The amount of the biocomposite consisting gold nanoparticles loaded with antibodies and the volume of Nafion solution used for fabricating the immunosensor have been studied to ensure sensitivity and conductivity of the immunosensor. The immunosensor has been employed for monitoring the concentrations of paraoxon in aqueous samples up to 1920 μg l⁻¹ with a detection limit of 12 μg l⁻¹.     

Sensitive detection of glucose based on gold nanoparticles assisted silver mirror reaction

We developed a simple, non-enzymatic approach for the colorimetric detection of glucose based on a gold nanoparticles (Au NPs) assisted silver mirror reaction (AuSMR). The linear range of the concentration of glucose is from 0.04 mM to 1 mM, and the lowest concentration that can be distinguished by the naked eye is 10 nM. This approach has been successfully used for detecting glucose in serum.     

Simple and sensitive colorimetric detection of cysteine based on ssDNA-stabilized gold nanoparticles

In this paper, we demonstrate a simple and sensitive colorimetric detection of cysteine based on the cysteine-mediated color change of ssDNA-stabilized gold nanoparticles (AuNPs). Cysteine is capable of absorbing onto AuNPs surfaces via the strong interaction between its thiol group and gold. ssDNA molecules which stabilize AuNPs against salt-induced aggregation are removed away by cysteine encapsulation on the AuNPs surfaces, resulting in a characteristic color change of AuNPs from red to blue as soon as salt is added. The ratio of absorptions at 640 to 525 nm (A ₆₄₀/A ₅₂₅) is linear dependent on the cysteine concentration in the range from 0.1 to 5 μM. Furthermore, amino acids other than cysteine cannot mediate the color change under the identical conditions due to the absence of thiol groups, suggesting the selectivity of the proposed method toward cysteine. The employment of complicated protocols and sophisticated processes such as the preparation of modified AuNPs are successfully avoided in design to realize the simple and low-cost cysteine detection; and the high sensitivity and low cost of the method is favorable for practical applications. Figure In the presence of cysteine, cysteine binds to the AuNPs surface via Au-S bond, spontaneously driving ssDNA molecules away from the nanoparticles, which leads to the AuNPs aggregation under the condition of NaCl introduction, and the corresponding color change from red to blue. However, the presence of other amino acids results in no color change due to the absence of thiol groups. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Iminodiacetic acid-functionalized gold nanoparticles for optical sensing of myoglobin via Cu2+ coordination

A novel gold nanoparticle (AuNP)-based optical sensing system has been developed for the detection of myoglobin (Mb), which is of significant importance for early disease diagnosis. Two thiol molecules containing an iminodiacetic acid moiety (IDA) were synthesized. This detection is based on the Mb-induced aggregation of IDA-functionalized AuNPs resulting from the structures of Mb sandwiched between the functionalized AuNPs via Cu(2+) bridges in the coordination interactions of IDA-Cu(2+)-histidine residues available on the Mb surface, which was confirmed by UV-vis spectroscopy, transmission electron microscopy, dynamic light scattering, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The induction aggregation resulted in a red shift in plasmon resonance band of the AuNPs concomitant with a change in solution color from red to purple. The qualitative and quantitative detections of Mb can be achieved by colorimetric observations and UV-vis spectral measurements, respectively. The selectivity of protein assay with the functionalized AuNPs was further investigated, and it is found that the optical sensing of histidine-rich proteins is closely related to number and distribution of surface histidine residues as well as size of proteins.     

Colorimetric detection of urea,urease, and urease inhibitor based on the peroxidase-like activity of gold nanoparticles

Herein, we reported for the first time that gold nanoparticles-catalyzed 3,3′,5,5′-tetramethylbenzidine-H₂O₂ system can serve as an ultrasensitive colorimetric pH indicator. Gold nanoparticles acted as a catalyst and imitated the function of horseradish peroxidase. The absorbance at 450 nm of the yellow-color product in the catalytic reaction exhibited a linear fashion over the pH range of 6.40–6.60. On the basis of this property, we constructed a novel sensing platform for the determination of urea, urease, and urease inhibitor. The limit of detection for urea and urease was 5 μM and 1.8 U/L, respectively. The half-maximal inhibition value IC₅₀ of acetohydroxamic acid was found to be 0.05 mM. Urea in human urine and urease in soil were detected with satisfied results.