Unexpected H2O-induced Ar-X activation with trifluoromethylpalladium(II) aryls

A series of new complexes [(L-L)Pd(Ar)(CF3)] (L-L = dppe, dppp, tmeda; Ar = Ph, p-Tol, C6D5) have been synthesized and fully characterized in solution and in the solid state. Remarkable Ph-X activation (X = I, Cl) by [(dppe)Pd(Ph)(CF3)] (1) has been found to come about to cleanly produce biphenyl and [(dppe)Pd(Ph)(X)]. This reaction does not take place under rigorously anhydrous conditions but in the presence of traces of water it readily occurs, exhibiting an induction period and being zero order in PhI. As shown by mechanistic studies, the role of water is to promote reduction of small quantities of the Pd(II) complex to Pd(0) which activates the Ph-X bond. Subsequent transmetalation to give diphenyl Pd complexes, followed by Ph-Ph reductive elimination give rise to the observed products. The water-induced reduction to catalytically active Pd(0) has been demonstrated to proceed via both the Pd(II)/P(III) to Pd(0)/P(V) redox mechanism and alpha-F transfer, followed by facile hydrolysis of the difluorocarbene to carbonyl, migratory insertion, and reductive elimination of PhC(X)O (X = F, OH, or OOCPh). In the absence of H2O and ArX, the diphosphine-stabilized trifluoromethyl Pd phenyl complexes undergo slow Ph-CF3 reductive elimination under reinforcing conditions (xylenes, 145 degrees C).     

Synthetic and computational studies of the palladium(iv) system Pd(alkyl)(aryl)(alkynyl)(bidentate)(triflate) exhibiting selectivity in C-C reductive elimination

Synthetic routes to methyl(aryl)alkynylpalladium(iv) motifs are presented, together with studies of selectivity in carbon-carbon coupling by reductive elimination from Pd(IV) centres. The iodonium reagents IPh(C[triple bond, length as m-dash]CR)(OTf) (R = SiMe(3), Bu(t), OTf = O(3)SCF(3)) oxidise Pd(II)Me(p-Tol)(L(2)) (1-3) [L(2) = 1,2-bis(dimethylphosphino)ethane (dmpe) (1), 2,2'-bipyridine (bpy) (2), 1,10-phenanthroline (phen) (3)] in acetone-d(6) or toluene-d(9) at -80 °C to form complexes Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CR)(L(2)) [R = SiMe(3), L(2) = dmpe (4), bpy (5), phen (6); R = Bu(t), L(2) = dmpe (7), bpy (8), phen (9)] which reductively eliminate predominantly (>90%) p-Tol-C[triple bond, length as m-dash]CR above ～-50 °C. NMR spectra show that isomeric mixtures are present for the Pd(IV) complexes: three for dmpe complexes (4, 7), and two for bpy and phen complexes (5, 6, 8, 9), with reversible reduction in the number of isomers to two occurring between -80 °C and -60 °C observed for the dmpe complex 4 in toluene-d(8). Kinetic data for reductive elimination from Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CSiMe(3))(dmpe) (4) yield similar activation parameters in acetone-d(6) (66 ± 2 kJ mol(-1), ΔH(?) 64 ± 2 kJ mol(-1), ΔS(?)-67 ± 2 J K(-1) mol(-1)) and toluene-d(8) (E(a) 68 ± 3 kJ mol(-1), ΔH(?) 66 ± 3 kJ mol(-1), ΔS(?)-74 ± 3 J K(-1) mol(-1)). The reaction rate in acetone-d(6) is unaffected by addition of sodium triflate, indicative of reductive elimination without prior dissociation of triflate. DFT computational studies at the B97-D level show that the energy difference between the three isomers of 4 is small (12.6 kJ mol(-1)), and is similar to the energy difference encompassing the six potential transition state structures from these isomers leading to three feasible C-C coupling products (13.0 kJ mol(-1)). The calculations are supportive of reductive elimination occurring directly from two of the three NMR observed isomers of 4, involving lower activation energies to form p-TolC[triple bond, length as m-dash]CSiMe(3) and earlier transition states than for other products, and involving coupling of carbon atoms with higher s character of σ-bonds (sp(2) for p-Tol, sp for C[triple bond, length as m-dash]C-SiMe(3)) to form the product with the strongest C-C bond energy of the potential coupling products. Reductive elimination occurs predominantly from the isomer with Me(3)SiC[triple bond, length as m-dash]C trans to OTf. Crystal structure analyses are presented for Pd(II)Me(p-Tol)(dmpe) (1), Pd(II)Me(p-Tol)(bpy) (2), and the acetonyl complex Pd(II)Me(CH(2)COMe)(bpy) (11).     

New progress in theoretical studies on palladium-catalyzed C−C bond-forming reaction mechanisms

This review reports a series of mechanistic studies on Pd-catalyzed C-C cross-coupling reactions via density functional theory(DFT) calculations.A brief introduction of fundamental steps involved in these reactions is given,including oxidative addition,transmetallation and reductive elimination.We aim to provide an important review of recent progress on theoretical studies of palladium-catalyzed carbon-carbon cross-coupling reactions,including the C-C bond formation via C-H bond activation,decarboxylation,Pd(Ⅱ)/Pd(Ⅳ) catalytic cycle and double palladiums catalysis.     

Mechanistic studies of Wacker-type intramolecular aerobic oxidative amination of alkenes catalyzed by Pd(OAc)2/pyridine

Wacker-type oxidative cyclization reactions have been the subject of extensive research for several decades, but few systematic mechanistic studies of these reactions have been reported. The present study features experimental and DFT computational studies of Pd(OAc)(2)/pyridine-catalyzed intramolecular aerobic oxidative amination of alkenes. The data support a stepwise catalytic mechanism that consists of (1) steady-state formation of a Pd(II)-amidate-alkene chelate with release of 1 equiv of pyridine and AcOH from the catalyst center, (2) alkene insertion into a Pd-N bond, (3) reversible β-hydride elimination, (4) irreversible reductive elimination of AcOH, and (5) aerobic oxidation of palladium(0) to regenerate the active trans-Pd(OAc)(2)(py)(2) catalyst. Evidence is obtained for two energetically viable pathways for the key C-N bond-forming step, featuring a pyridine-ligated and a pyridine-dissociated Pd(II) species. Analysis of natural charges and bond lengths of the alkene-insertion transition state suggest that this reaction is best described as an intramolecular nucleophilic attack of the amidate ligand on the coordinated alkene.     

Structural and mechanistic investigations of the oxidation of dimethylplatinum(II) complexes by dioxygen

The oxidation of (tmeda)Pt(II)(CH(3))(2) (1, tmeda = N,N,N',N'-tetramethylethylenediamine) to (tmeda)Pt(IV)(OH)(OCH(3))(CH(3))(2) (3) by dioxygen in methanol proceeds via a two-step mechanism. The initial reaction between (tmeda)Pt(CH(3))(2) and dioxygen yields a hydroperoxoplatinum(IV) intermediate, (tmeda)Pt(OOH)(OCH(3))(CH(3))(2) (2), which reacts with a second equivalent of (tmeda)Pt(CH(3))(2) to afford the final product 3. Both 2 and 3 have been fully characterized, including X-ray crystallographic structure determinations. The effect of ligand variation on the oxidation of several dimethylplatinum(II) complexes by 2 as well as by dioxygen has been examined.     

Different rotamer states of cytosine nucleobases in heteronuclear PtPd-, PtPd2, and Pt2Pd2Ag complexes derived from [Pt(2,2'-bpy)(1-MeC-N3)2]2+ (1-MeC = 1-methylcytosine): first examples of species with head-head oriented 1-MeC(-) ligands

[Pt(2,2'-bpy)(1-MeC-N3)(2)](NO(3))(2) (1) (2,2'-bpy = 2,2'-bipyridine; 1-MeC = 1-methylcytosine) exists in water in an equilibrium of head-tail and head-head rotamers, with the former exceeding the latter by a factor of ca. 20 at room temperature. Nevertheless, 1 reacts with (en)Pd(II) (en = ethylenediamine) to give preferentially the dinuclear complex [Pt(2,2'-bpy)(1-MeC(-)-N3,N4)(2)Pd(en)](NO(3))(2)·5H(2)O (2) with head-head arranged 1-methylctosinato (1-MeC(-)) ligands and Pd being coordinated to two exocyclic N4H(-) positions. Addition of AgNO(3) to a solution of 2 leads to formation of a pentanuclear chain compound [{Pt(2,2'-bpy)(1-MeC(-))(2)Pd(en)}(2)Ag](NO(3))(5)·14H(2)O (5) in which Ag(+) cross-links two cations of 2 via the four available O2 sites of the 1-MeC(-) ligands. 2 and 5 appear to be the first X-ray structurally characterized examples of di- and multinuclear complexes derived from a Pt(II) species with two cis-positioned cytosinato ligands adopting a head-head arrangement. (tmeda)Pd(II) (tmeda = N,N,N',N'-tetramethylethylenediamine) and (2,2'-bpy)Pd(II) behave differently toward 1 in that in their derivatives the head-tail orientation of the 1-MeC(-) nucleobases is retained. In [Pt(2,2'-bpy)(1-MeC(-))(2){Pd(2,2'-bpy)}(2)](NO(3))(4)·10H(2)O (4), both (2,2'-bpy)Pd(II) entities are pairwise bonded to N4H(-) and O2 sites of the two 1-MeC(-) rings, whereas in [Pt(2,2'-bpy)(1-MeC(-))(2){Pd(tmeda)}(2)(NO(3))](NO(3))(3)·5H(2)O (3) only one of the two (tmeda)Pd(II) units is chelated to N4H(-) and O2. The second (tmeda)Pd(II) is monofunctionally attached to a single N4H(-) site. On the basis of these established binding patterns, ways to the formation of mixed Pt/Pd complexes and possible intermediates are proposed. The methylene protons of the en ligand in 2 are special in that they display two multiplets separated by 0.64 ppm in the (1)H NMR spectrum.     

Mechanisms of C-C and C-H alkane reductive eliminations from octahedral Pt(IV): reaction via five-coordinate intermediates or direct elimination?

The Pt(IV) complexes P(2)PtMe(3)R [P(2) = dppe (PPh(2)(CH(2))(2)PPh(2)), dppbz (o-PPh(2)(C(6)H(4))PPh(2)); R = Me, H] undergo reductive elimination reactions to form carbon-carbon or carbon-hydrogen bonds. Mechanistic studies have been carried out for both C-C and C-H coupling reactions and the reductive elimination reactions to form ethane and methane are directly compared. For C-C reductive elimination, the evidence supports a mechanism of initial phosphine chelate opening followed by C-C coupling from the resulting five-coordinate intermediate. In contrast, mechanistic studies on C-H reductive elimination support an unusual pathway at Pt(IV) of direct coupling without preliminary ligand loss. The complexes fac- P(2)PtMe(3)R (P(2) = dppe, R = Me, H; P(2) = dppbz, R = Me) have been characterized crystallographically. The Pt(IV) hydrides, fac-P(2)PtMe(3)H (P(2) = dppe, dppbz), are rare examples of stable phosphine ligated Pt(IV) alkyl hydride complexes.     

Aryl-fluoride reductive elimination from Pd(II): feasibility assessment from theory and experiment

DFT methods were used to elucidate features of coordination environment of Pd(II) that could enable Ar-F reductive elimination as an elementary C-F bond-forming reaction potentially amenable to integration into catalytic cycles for synthesis of organofluorine compounds with benign stoichiometric sources of F(-). Three-coordinate T-shaped geometry of Pd(II)Ar(F)L (L = NHC, PR(3)) was shown to offer kinetics and thermodynamics of Ar-F elimination largely compatible with synthetic applications, whereas coordination of strong fourth ligands to Pd or association of hydrogen bond donors with F each caused pronounced stabilization of Pd(II) reactant and increased activation barrier beyond the practical range. Decreasing donor ability of L promotes elimination kinetics via increasing driving force and para-substituents on Ar exert a sizable SNAr-type TS effect. Synthesis and characterization of the novel [Pd(C(6)H(4)-4-NO(2))ArL(mu-F)](2) (L = P(o-Tolyl)(3), 17; P(t-Bu)(3), 18) revealed stability of the fluoride-bridged dimer forms of the requisite Pd(II)Ar(F)L as the key remaining obstacle to Ar-F reductive elimination in practice. Interligand steric repulsion with P(t-Bu)(3) served to destabilize dimer 18 by 20 kcal/mol, estimated with DFT relative to PMe(3) analog, yet was insufficient to enable formation of greater than trace quantities of Ar-F; C-H activation of P(t-Bu)(3) followed by isobutylene elimination was the major degradation pathway of 18 while Ar/F- scrambling and Ar-Ar reductive elimination dominated thermal decomposition of 17. However, use of Buchwald's L = P(C(6)H(4)-2-Trip)(t-Bu)(2) provided the additional steric pressure on the [PdArL(mu-F)](2) core needed to enable formation of aryl-fluoride net reductive elimination product in quantifiable yields (10%) in reactions with both 17 and 18 at 60 degrees over 22 h.     

Ni(0)L]-catalyzed cyclodimerization of 1,3-butadiene: a density functional investigation of the influence of electronic and steric factors on the regulation of the selectivity

We present a comprehensive theoretical investigation of the influence of the ligand L on the regulation of the product selectivity for the [Ni(0)L]-catalyzed cyclodimerization of 1,3-butadiene. The investigation was based on density functional theory (DFT) and a combined DFT and molecular mechanics (QM/MM) approach for the real [bis(butadiene)Ni(0)L] catalysts with L = PMe(3), I; PPh(3), II; P((i)Pr)(3), III; and P(OPh)(3), IV. The role of electronic and steric effects has been elucidated for all crucial elementary steps of the entire catalytic cycle. Allylic isomerization, allylic enantioface conversion, as well as oxidative coupling are shown to be influenced to a minor extent by electronic and steric effects. In contrast, the ligand's properties have a distinct influence on the preestablished equilibrium between the eta(3),eta(1)(C(1)) and bis-eta(3) forms 2 and 4, respectively, of the [(octadienediyl)Ni(II)L] complex and on the rate-determining reductive elimination following competing routes for generation of either VCH, cis-1,2-DVCB, or cis,cis-COD. Electronic factors are shown to predominantly determine the position of the kinetically mobile 2 right harpoon over left harpoon 4 equilibrium. 4 is the prevailing species for ligands L that are pi-acceptors (L = P(OPh)(3)) or weak sigma-donors (L = PPh(3)), while stronger sigma-donors (L = PMe(3), P((i)Pr)(3)) displace the equilibrium to the left. Steric bulk on the ligand as well as its pi-acceptor ability act to facilitate the reductive elimination, while sigma-donor abilities serve to retard this process. Electronic and steric factors are found to not influence uniformly the reductive elimination routes with either 2 or 4 involved. The regulation of the product selectivity is elucidated on the basis of both thermodynamic and kinetic considerations.     

Mechanism of the mild functionalization of arenes by diboron reagents catalyzed by iridium complexes. Intermediacy and chemistry of bipyridine-ligated iridium trisboryl complexes

This paper describes mechanistic studies on the functionalization of arenes with the diboron reagent B(2)pin(2) (bis-pinacolato diborane(4)) catalyzed by the combination of 4,4'-di-tert-butylbipyridine (dtbpy) and olefin-ligated iridium halide or olefin-ligated iridium alkoxide complexes. This work identifies the catalyst resting state as [Ir(dtbpy)(COE)(Bpin)(3)] (COE = cyclooctene, Bpin = 4,4,5,5-tetramethyl-1,3,2-dioxaborolanyl). [Ir(dtbpy)(COE)(Bpin)(3)] was prepared by independent synthesis in high yield from [Ir(COD)(OMe)](2), dtbpy, COE, and HBpin. This complex is formed in low yield from [Ir(COD)(OMe)](2), dtbpy, COE, and B(2)pin(2). Kinetic studies show that this complex reacts with arenes after reversible dissociation of COE. An alternative mechanism in which the arene reacts with the Ir(I) complex [Ir(dtbpy)Bpin] after dissociation of COE and reductive elimination of B(2)pin(2) does not occur to a measurable extent. The reaction of [Ir(dtbpy)(COE)(Bpin)(3)] with arenes and the catalytic reaction of B(2)pin(2) with arenes catalyzed by [Ir(COD)(OMe)](2) and dtbpy occur faster with electron-poor arenes than with electron-rich arenes. However, both the stoichiometric and catalytic reactions also occur faster with the electron-rich heteroarenes thiophene and furan than with arenes, perhaps because eta(2)-heteroarene complexes are more stable than the eta(2)-arene complexes and the eta(2)-heteroarene or arene complexes are intermediates that precede oxidative addition. Kinetic studies on the catalytic reaction show that [Ir(dtbpy)(COE)(Bpin)(3)] enters the catalytic cycle by dissociation of COE, and a comparison of the kinetic isotope effects of the catalytic and stoichiometric reactions shows that the reactive intermediate [Ir(dtbpy)(Bpin)(3)] cleaves the arene C-H bond. The barriers for ligand exchange and C-H activation allow an experimental assessment of several conclusions drawn from computational work. Most generally, our results corroborate the conclusion that C-H bond cleavage is turnover-limiting, but the experimental barrier for this bond cleavage is much lower than the calculated barrier.     

The rich chemistry of [Zn2Cp*2]: trapping three different types of zinc ligands in the PdZn7 complex [Pd(ZnCp*)4(ZnMe)2{Zn(tmeda)}

The synthesis, structural characterization, and bonding situation analysis of a novel, all-zinc, hepta-coordinated palladium complex [Pd(ZnCp*)(4)(ZnMe)(2){Zn(tmeda)}] (1) is reported. The reaction of the substitution labile d(10) metal starting complex [Pd(CH(3))(2)(tmeda)] (tmeda = N,N,N',N'-tetramethyl-ethane-1,2-diamine) with stoichiometric amounts of [Zn(2)Cp*(2)] (Cp* = pentamethylcyclopentadienyl) results in the formation of [Pd(ZnCp*)(4)(ZnMe)(2){Zn(tmeda)}] (1) in 35% yield. Compound 1 has been fully characterized by single-crystal X-ray diffraction, (1)H and (13)C NMR spectroscopy, IR spectroscopy, and liquid injection field desorption ionization mass spectrometry. It consists of an unusual [PdZn(7)] metal core and exhibits a terminal {Zn(tmeda)} unit. The bonding situation of 1 with respect to the properties of the three different types of Zn ligands Zn(R,L) (R = CH(3), Cp*; L = tmeda) bonded to the Pd center was studied by density functional theory quantum chemical calculations. The results of energy decomposition and atoms in molecules analysis clearly point out significant differences according to R vs L. While Zn(CH(3)) and ZnCp* can be viewed as 1e donor Zn(I) ligands, {Zn(tmeda)} is best described as a strong 2e Zn(0) donor ligand. Thus, the 18 valence electron complex 1 nicely fits to the family of metal-rich molecules of the general formula [M(ZnR)(a)(GaR)(b)] (a + 2b = n ≥ 8; M = Mo, Ru, Rh; Ni, Pd, Pt; R = Me, Et, Cp*).     

Studies of reductive elimination reactions to form carbon-oxygen bonds from Pt(IV) complexes.

The platinum(IV) complexes fac-L(2)PtMe(3)(OR) (L(2) = bis(diphenylphosphino)ethane, o-bis(diphenylphosphino)benzene, R = carboxyl, aryl; L = PMe(3), R = aryl) undergo reductive elimination reactions to form carbon-oxygen bonds and/or carbon-carbon bonds. The carbon-oxygen reductive elimination reaction produces either methyl esters or methyl aryl ethers (anisoles) and L(2)PtMe(2), while the carbon-carbon reductive elimination reaction affords ethane and L(2)PtMe(OR). Choice of reaction conditions allows the selection of either type of coupling over the other. A detailed mechanistic study of the reductive elimination reactions supports dissociation of the OR(-) ligand as the initial step for the C-O bond formation reaction. This is followed by a nucleophilic attack of OR(-) upon a methyl group bound to the Pt(IV) cation to produce the products MeOR and L(2)PtMe(2). C-C reductive elimination proceeds from L(2)PtMe(3)(OR) by initial L (L = PMe(3)) or OR(-) (L(2) = dppe, dppbz) dissociation, followed by C-C coupling from the resulting five-coordinate intermediate. Our studies demonstrate that both C-C and C-O reductive elimination reactions from Pt(IV) are more facile in polar solvents, in the presence of Lewis acids, and for OR(-) groups that contain electron withdrawing substituents.     

Palladium-catalyzed oxidative aryltrifluoromethylation of activated alkenes at room temperature

A palladium-catalyzed intramolecular oxidative aryltrifluoromethylation reaction of activated alkenes has been explored. The reaction allows for an efficient synthesis of a variety of CF(3)-containing oxindoles. Preliminary mechanistic study indicated that the reaction involves a C(sp(3))-Pd(IV)(CF(3)) intermediate, which undergoes reductive elimination to afford a C(sp(3))-CF(3) bond.     

Competitive aryl-iodide vs aryl-aryl reductive elimination reactions in Pt(IV) complexes: experimental and theoretical studies

The platinum(IV) complex trans-(dmpe)Pt(IV)(Ar)2I2 (2, dmpe = 1,2-dimethylphosphinoethane, Ar = 4-FC6H4) rapidly reacts, upon moderate heating in solution under ambient light, via two distinct pathways: isomerization to the corresponding cis-isomer (3) and Ar-I reductive elimination to give (dmpe)Pt(II)(Ar)I (4). Complex 3 undergoes, upon prolonged heating at high temperatures, an exclusive Ar-Ar reductive elimination reaction to give (dmpe)Pt(II)I2. Experimental and DFT studies showed that the 2-to-3 isomerization proceeds via three pathways: photochemical or thermal phosphine chelate opening and a mechanism involving cleavage of the Pt-I bond. The isomerization reaction is significantly slowed down but not stopped in the absence of light or in the presence of an excess of tetra-n-butylammonium iodide. On the other hand, the Ar-I reductive elimination from 2 proceeds via the Pt(delta+)-I(delta-) ion pairlike transition state. Use of the rigid dmpe analogue 1,2-dimethylphosphinobenzene (dmpbz) as the ligand shuts down the chelate ring-opening isomerization pathway and enables faster Ar-I reductive elimination thus making the latter reaction the major reaction route for the dmpbz supported trans-diiodo Pt(IV) complex 8.     

Solvent/base effects in the selective domino synthesis of phenanthridinones that involves high-valent palladium species: experimental and theoretical studies

The domino reaction of o-bromobenzamides 1a-m in the presence of K(2)CO(3) and the [PdCl(2)(PPh(3))(2)] catalyst granted a selective access to phenanthridinones 2 or to the new 1-carboxamide phenanthridinones 3 depending on the solvent, DMF or 1,4-dioxane, respectively. Investigations of the reaction parameters provided the first example of a direct correlation between the base dissociation and the solvent polarity on the selectivity observed. Moreover, mechanistic studies (NMR spectroscopy and ESI-MS monitoring) allowed us to characterize Pd(II) palladacycle 4 and biaryl species as common intermediates for these two domino processes. On that basis, C(sp(2))-C(sp(2)) bond formation is envisaged by generation of a Pd(IV) complex after oxidative addition of 1 into Pd(II) palladacycle 4, a rationale that is supported by DFT calculations. A general catalytic cycle is proposed to account for these observations.     

Isocytosine as a hydrogen-bonding partner and as a ligand in metal complexes

Isocytosine (ICH; 1) exists in solution in an equilibrium of tautomers 1a and 1b with the N1 and N3 positions carrying the acidic proton, respectively. In the solid state, both tautomers coexist in a 1:1 ratio. As we show, the N3H tautomer 1b can selectively be crystallized in the presence of the model nucleobase 1-methylcytosine (1-MeC). The complex 1b x (1-MeC)2 x H2O (2) forms pairs through three hydrogen bonds between the components; hydrogen bonds between identical molecules are also formed, leading to an infinite tape structure. On the other hand, the N1H tautomer 1a co-crystallizes with protonated ICH to give [1a x ICH2]NO3 (3), again with three hydrogen bonds between the partners, yet the acidic proton is disordered over the two entities. With M(II)(dien) (M=Pt, Pd; dien=diethylenetriamine) preferential coordination of tautomer 1a through the N3 position is observed. DFT calculations, which were also extended to Pt(II)(tmeda) linkage isomers (tmeda=N,N,N',N'-tetramethylethylenediamine), suggest that intramolecular hydrogen bonding between the ICH tautomers and the co-ligands at M, while adding to the preference for N3 coordination, is not the major determining factor. Rather it is the inherently stronger Pt-N3 bond which favors complexation of 1a. With an excess of M(II)(dien), dinuclear species [M2(dien)2(IC-N1,N3)]3+ (M=Pd(II), 4 and Pt(II), 5) also form and were isolated as their ClO4(-) salts and structurally characterized. In strongly acidic medium 5 is converted to [Pt(dien)(ICH-N1)]2+ (6), that is, to the Pt(II) complex of tautomer 1b.     

Pd2Ag triangle supported by two micro3-amidopyridine ligands

[Pd(tmeda)(Hampy-N1)(H2O)]2+ (tmeda=N,N,N',N'-tetramethylethylenediamine; Hampy=2-aminopyridine) forms in the presence of Ag+ at pH 8-9 a triangular Pd2Ag complex containing two deprotonated ampy- ligands. It has been crystallized and structurally characterized with nitrate anions and a second co-crystallized AgNO3, [{Pd(ampy)(tmeda)}2Ag(micro-NO3)2Ag(NO3)2]. The two amidopyridine ligands are triply bridging, binding to Ag+ in a monodentate fashion viaN1, and to two PdII centres in a micro2-bridging fashion via the monodeprotonated N2 position. The resulting four-membered Pd(ampy)2Pd metallacycle is syn-planar with Pd[dot dot dot]Pd separations of 3.0878(13) A. The Pd...Ag distances are 3.0879(14) A in (isosceles triangle). In solution (D2O), the two ampy- ligand in are non-equivalent as concluded from a detailed 1H NMR spectroscopic study and confirmed by a 13C NMR spectrum. Removal of Ag+ from, as achieved by addition of Cl-, causes cluster degradation and linkage isomerization of PdII(tmeda) from the exocyclic N2 to the endocyclic N1 position.     

Chemistry of Bis(aryloxo)palladium(II) Complexes with N-Donor Ligands: Structural Features of the Palladium-to-Oxygen Bond and Formation of O-H.O Bonds

Reaction of palladium acetate with 2 equiv of sodium phenoxide in the presence of a chelate diamine ligand affords the complexes [Pd(OPh)(2)(N approximately N)] (N approximately N = bpy (1), tmeda (2), teeda (3), dpe (4), dmap (5)). These yellow to orange bis(phenoxo)palladium(II) complexes are thermally stable at room temperature in the solid state as well as in solution. Addition of an excess of pentafluorophenol to 1, 2, 4, and 5 affords crystalline complexes [Pd(OC(6)F(5))(2)(N approximately N)] (N approximately N = bpy (6), tmeda (7), dpe (8), dmap (9)). Crystals of 1 and 6 have been subjected to X-ray diffraction studies. Crystals of 1 are orthorhombic, space group P2(1)2(1)2(1) (no. 19), with a = 6.7655(6) ?, b = 16.0585(10) ?, c = 16.7275(13) ?, and Z = 4. Crystals of 6 are triclinic, space group P&onemacr; (no. 2), with a = 7.567(4) ?, b = 12.708(3) ?, c = 12.912(5) ?, alpha = 61.51(3) degrees, beta = 74.74(4) degrees, gamma = 88.78(4) degrees, and Z = 2. The molecular structures of 1 and 6 show them to be square-planar complexes, and the main structural difference between these complexes is the orientation of the aromatic rings. In 6 the OC(6)F(5) ligands are almost parallel in a face-to-face orientation (pi-pi stacking interactions), whereas in 1 the OC(6)H(5) units are skewed away from each other. An unexpected "mixed" alkoxo(aryloxo) complex [Pd(OCH(CF(3))(2))(OPh)(bpy)].HOPh (10) is formed when 1 is reacted with 1,1,1,3,3,3-hexafluoro-2-propanol. The molecular structure of 10 shows O-H.O hydrogen bonding (O.O = 2.642(8) ?) between the hydroxyl hydrogen of phenol and the oxygen atom of the phenoxide ligand as well as an additional C-H.O contact (C.O) = 2.95(1) ?), which can be regarded as the initial stage of a base-assisted beta-hydrogen elimination. Crystals of 10 are monoclinic, space group P2(1)/c, with a = 8.3241(14) ?, b = 11.0316(17) ?, c = 26.376(3) ?, alpha = 93.01(1) degrees, Z = 4. Spectroscopic data of complexes 1-10 indicate that the oxygen atom of the aryloxide or alkoxide ligand is extremely electron-rich, leading to high polarization of the palladium-to-oxygen bond. The bis(phenoxide) complexes 1, 2, and 4 associate with two molecules of phenol through O-H.O hydrogen bonds to form adducts [Pd(OPh)(2)(N approximately N)].2HOPh (N approximately N = bpy (11), tmeda (12), dpe (13)). The palladium complexes 6-9 with OC(6)F(5) groups show no tendency to form adducts with alcohols.     

Through-space intramolecular palladium rearrangement in substituted aryl complexes: theoretical study of the aryl to alkylpalladium migration process

DFT/B3LYP calculations have been carried out to study intramolecular 1,n palladium shifts (n = 3-5) between sp2 and sp3 carbon atoms in alkylarylpalladium systems. Such shifts, which also involve a concomitant exchange with a hydrogen atom of the alkylaryl ligand, are quite often a pivotal step of several organic transformations mediated by palladium complexes. We show that the intimate mechanism for the 1,3 shift corresponds to a Pd(IV) pathway, whereas a Pd(II) pathway is favored in the case of 1,5 migrations. In the case of 1,4 migrations, both mechanisms are competitive. The Pd(IV) pathway can involve either a true Pd(IV) intermediate (oxidative addition/reductive elimination mechanism) or a Pd(IV) transition state (oxidative hydrogen migration mechanism). The energy barrier is very high for the 1,3 palladium shift, making this process very unlikely, in contrast to the other ones which have enthalpy barriers ranging between 22.8 kcal mol-1 (for the 1,5 shift) and 31.9 kcal mol-1 (for the least favorable 1,4 shift studied here). All of these results are in line with our previous results for palladium shifts between two sp2 carbon atoms. In addition, the sp2 to sp3 shifts have been found to be rather exothermic owing to the possibility for the alkylaryl ligand in the product to achieve a eta3 coordination mode. This eta3 coordination mode results either from the shift itself (1,3 case) or from a subsequent rearrangement that comprises a chain-running mechanism within the alkyl chain bound to the metal (for n > 3).     

Zinc chalcogenolate complexes as precursors to ZnE and Mn/ZnE (E = S, Se) clusters

The ternary clusters (tmeda)(6)Zn(14-x)Mn(x)S(13)Cl(2) (1a-d) and (tmeda)(6)Zn(14-x)Mn(x)Se(13)Cl(2) (2a-d), (tmeda = N,N,N',N'-tetramethylethylenediamine; x ≈ 2-8) and the binary clusters (tmeda)(6)Zn(14)E(13)Cl(2) (E = S, 3; Se, 4;) have been isolated by reacting (tmeda)Zn(ESiMe(3))(2) with Mn(II) and Zn(II) salts. Single crystal X-ray analysis of the complexes confirms the presence of the six "(tmeda)ZnE(2)" units as capping ligands that stabilize the clusters, and distorted tetrahedral geometry around the metal centers. Mn(II) is incorporated into the ZnE framework by substitution of Zn(II) ions in the cluster. The polynuclear complexes (tmeda)(6)Zn(12.3)Mn(1.7)S(13)Cl(2)1a, (tmeda)(6)Zn(12.0)Mn(2.0)Se(13)Cl(2)2a, and (tmeda)(6)Zn(8.4)Mn(5.6)Se(13)Cl(2)2d represent the first examples of "Mn/ZnE" clusters with structural characterization and indications of the local chemical environment of the Mn(II) ions. The incorporation of higher amounts of Mn into 1d and 2d has been confirmed by elemental analysis. Density functional theory (DFT) calculations indicate that replacement of Zn with Mn is perfectly feasible and at least partly allows for the identification of some sites preferred by the Mn(II) metals. These calculations, combined with luminescence studies, suggest a distribution of the Mn(II) in the clusters. The room temperature emission spectra of clusters 1c-d display a significant red shift relative to the all zinc cluster 3, with a peak maximum centered at 730 nm. Clusters 2c-d display a peak maximum at 640 nm in their emission spectra.