Comparative study of acetic acid, methanol, and water adsorbed on anatase TiO2 probed by sum frequency generation spectroscopy

Sum frequency generation (SFG) vibrational spectroscopy is used to investigate the surface adsorption of three probe molecules-acetic acid, methanol, and water--on a film composed of nanoscale anatase TiO(2) particles. On the TiO(2) surface, only one adsorption mode, chemisorption, is observed for acetic acid. This is evidenced by one sharp SFG peak in the C-H region, which is stable with time and robust both to evacuation and to the addition of water. A Langmuir constant of (9.21 +/- 0.71) x 10(3) is determined from the adsorption isotherm. In the case of methanol adsorption, however, there are two adsorption modes, molecular physisorption and dissociative chemisorption. The corresponding SFG signals are stable with time but diminished with addition of water. Changes in the SFG features for methanol and for the methoxy species with addition of water and subsequent evacuation provide the first experimental proof of reversible hydroxylation and dehydroxylation at the TiO(2) surface. For water adsorption, only one mode, physisorption, is observed on the hydroxylated TiO(2) surface. The water adlayer is mobile, as is evidenced by variation of the water H-bonded SFG signal with time. Competitive adsorption among the three molecular probes is clearly resolved by in situ SFG measurements. The adsorption strength follows the order acetic acid (strongest), methanol, water (weakest). The adsorption order as well as the difference in response of methanol versus acetic acid adsorption to addition of water has direct implications for understanding TiO(2) photocatalysis as well as the surface modifications involved in TiO(2) photoelectrochemical solar cells and processes in TiO(2) nanomaterial synthesis and assembly.     

Monolayer vibrational spectroscopy by infrared-visible sum generation at metal and semiconductor surfaces

IR-visible sum generation spectroscopy, an interface-selective probe of molecular vibrations, is used to obtain vibrational spectra of molecular monolayers on metal and semiconductor surfaces. The spectra obey electric dipole selection rules: vibrational modes must be both Raman and infrared active to show sum frequency resonances. The orientation of molecules at the interface can be determined by interference between the resonant molecular signal and a substrate background signal. Sum generation is also observed at a buried interface in the absence of a dielectric discontinuity, suggesting uses at buried molecular structures such as polymer-polymer interfaces.     

Contact of oil with solid surfaces in aqueous media probed using sum frequency generation spectroscopy

We have studied the interface between hexadecane droplets and sapphire substrates in water using infrared-visible sum frequency generation spectroscopy (SFG). At high pH and above the isoelectric point of the sapphire substrate, the hexadecane drop is repelled due to electrostatic forces. The SFG measurements are consistent with the observation that a thick layer of water is present between the oil and the sapphire substrate. Below the isoelectric point of the sapphire substrate, the hexadecane drops stick to the sapphire surface. Surprisingly, the SFG results show the presence of a thin layer of water between hexadecane drop and the sapphire substrate. At this contact interface, we observe contributions to the SFG signal from both the hexadecane/water and water/sapphire interfaces. The reasons for the presence of a thin water layer with adhesive contact can be explained due to weaker repulsive double layer and the attractive van der Waals interactions.     

Ordered adsorption of coagulation factor XII on negatively charged polymer surfaces probed by sum frequency generation vibrational spectroscopy

Electrostatic interactions between negatively charged polymer surfaces and factor XII (FXII), a blood coagulation factor, were investigated by sum frequency generation (SFG) vibrational spectroscopy, supplemented by several analytical techniques including attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), quartz crystal microbalance (QCM), ζ-potential measurement, and chromogenic assay. A series of sulfonated polystyrenes (sPS) with different sulfonation levels were synthesized as model surfaces with different surface charge densities. SFG spectra collected from FXII adsorbed onto PS and sPS surfaces with different surface charge densities showed remarkable differences in spectral features and especially in spectral intensity. Chromogenic assay experiments showed that highly charged sPS surfaces induced FXII autoactivation. ATR-FTIR and QCM results indicated that adsorption amounts on the PS and sPS surfaces were similar even though the surface charge densities were different. No significant conformational change was observed from FXII adsorbed onto surfaces studied. Using theoretical calculations, the possible contribution from the third-order nonlinear optical effect induced by the surface electric field was evaluated, and it was found to be unable to yield the SFG signal enhancement observed. Therefore it was concluded that the adsorbed FXII orientation and ordering were the main reasons for the remarkable SFG amide I signal increase on sPS surfaces. These investigations indicate that negatively charged surfaces facilitate or induce FXII autoactivation on the molecular level by imposing specific orientation and ordering on the adsorbed protein molecules. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Membrane orientation of MSI-78 measured by sum frequency generation vibrational spectroscopy

Antimicrobial peptides (AMPs) selectively disrupt bacterial cell membranes to kill bacteria whereas they either do not or weakly interact with mammalian cells. The orientations of AMPs in lipid bilayers mimicking bacterial and mammalian cell membranes are related to their antimicrobial activity and selectivity. To understand the role of AMP-lipid interactions in the functional properties of AMPs better, we determined the membrane orientation of an AMP (MSI-78 or pexiganan) in various model membranes using sum frequency generation (SFG) vibrational spectroscopy. A solid-supported single 1,2-dipalmitoyl-an-glycero-3-[phospho-rac-(1-glycerol)] (DPPG) bilayer or 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG) bilayer was used as a model bacterial cell membrane. A supported 1,2-dipalmitoyl-an-glycero-3-phosphocholine (DPPC) bilayer or a 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) bilayer was used as a model mammalian cell membrane. Our SFG results indicate that the helical MSI-78 molecules are associated with the bilayer surface with ～70° deviation from the bilayer normal in the negatively charged gel-phase DPPG bilayer at 400 nM peptide concentration. However, when the concentration was increased to 600 nM, MSI-78 molecules changed their orientation to make a 25° tilt from the lipid bilayer normal whereas multiple orientations were observed for an even higher peptide concentration in agreement with toroidal-type pore formation as reported in a previous solid-state NMR study. In contrary, no interaction between MSI-78 and a zwitterionic DPPC bilayer was observed even at a much higher peptide concentration (～12,000 nM). These results demonstrate that SFG can provide insights into the antibacterial activity and selectivity of MSI-78. Interestingly, the peptide exhibits a concentration-dependent membrane orientation in the lamellar-phase POPG bilayer and was also found to induce toroidal-type pore formation. The deduced lipid flip-flop from SFG signals observed from lipids also supports MSI-78-induced toroidal-type pore formation.     

Probing polymer surfaces and interfaces using sum frequency generation vibrational spectroscopy - a powerful nonlinear optical technique

Sum frequency generation (SFG) vibrational spectroscopy has been proved to be a powerful technique which substantially impacts on many research areas in surface and interfacial sciences. This paper reviews the recent progress of applying this nonlinear optical technique in the studies of polymer surfaces and interfaces. The theoretical background of SFG is introduced first. Current applications of SFG in polymer science are then described in more detail to demonstrate the significance of this technique. Finally, a short summary is presented on this relatively new but widely applicable spectroscopic technique.     

Adsorption of organic molecules on rutile TiO2 and anatase TiO2 single crystal surfaces

The interaction of organic molecules with titanium dioxide surfaces has been the subject of many studies over the last few decades. Numerous surface science techniques have been utilised to understand the often complex nature of these systems. The reasons for studying these systems are hugely diverse given that titanium dioxide has many technological and medical applications. Although surface science experiments investigating the adsorption of organic molecules on titanium dioxide surfaces is not a new area of research, the field continues to change and evolve as new potential applications are discovered and new techniques to study the systems are developed. This tutorial review aims to update previous reviews on the subject. It describes experimental and theoretical work on the adsorption of carboxylic acids, dye molecules, amino acids, alcohols, catechols and nitrogen containing compounds on single crystal TiO(2) surfaces.     

Aqueous ionic and complementary zwitterionic soluble surfactants: molecular dynamics simulations and sum frequency generation spectroscopy of the surfaces

An aqueous ionic surfactant, 1-dodecyl-4-(dimethylamino)pyridinium (DMP) bromide, and the corresponding zwitterion 2-[4-(dimethylamino)pyridinio]dodecanoate (DPN) were explored by means of molecular dynamics (MD) simulations and, for the ionic system, by infrared-visible sum frequency generation (IR-vis SFG). The molecular structure of the interfacial layer was investigated for the ionic and zwitterionic systems as a function of surfactant concentration, both in water and in salt (KF or KBr) solutions, by MD simulations in a slab geometry. The buildup of the surface monolayer and a sublayer was monitored, and density and orientational profiles of the surfactants were evaluated. The difference between the ionic and zwitterionic systems and the effect of the added salt were analyzed at the molecular level. The results of MD simulations were compared to those of nonlinear optical spectroscopy measurements. IR-vis SFG was employed to study the DMP ionic surfactant in water and upon addition of simple salts. The influence of added salts on the different molecular moieties at the interface was quantified in detail experimentally.     

Adsorption of SDS and PEG on calcium fluoride studied by sum frequency generation vibrational spectroscopy

The adsorption of sodium dodecyl sulfate (SDS) from aqueous solution onto a calcium fluoride substrate (CaF(2)), in the presence of polyethylene glycol (PEG) of different molecular weights, has been investigated using the interface specific nonlinear optical technique of sum frequency generation (SFG) vibrational spectroscopy. Spectra of adsorbed SDS (in the C-H stretching region) were recorded at the surface of a CaF(2) prism in contact with SDS solutions at concentrations up to the cmc (8 mM) of the pure surfactant and in contact with binary solutions containing SDS and PEG with molecular weights from 400 to 12 000. In contrast with SFG spectra from the same combinations of surfactant and polymer on a hydrophobic surface, there was no evidence of spectra arising from the actual polymer adsorbed on CaF(2) at any polymer molecular weight either in the absence or presence of surfactant. However, there was indirect evidence for the presence of adsorbed polymer from changes in the SDS SFG spectra in the presence of polymer compared with spectra when the polymer was absent. The SFG spectra of SDS at 0.8 mM were closely similar to each other at all polymer molecular weights and different from the spectra in the absence of the polymer. The spectral differences between the polymer present and polymer absent was much smaller when the solution concentration of surfactant was 8 mM.     

Molecular interactions of proteins and peptides at interfaces studied by sum frequency generation vibrational spectroscopy

Interfacial peptides and proteins are critical in many biological processes and thus are of interest to various research fields. To study these processes, surface sensitive techniques are required to completely describe different interfacial interactions intrinsic to many complicated processes. Sum frequency generation (SFG) spectroscopy has been developed into a powerful tool to investigate these interactions and mechanisms of a variety of interfacial peptides and proteins. It has been shown that SFG has intrinsic surface sensitivity and the ability to acquire conformation, orientation, and ordering information about these systems. This paper reviews recent studies on peptide/protein-substrate interactions, peptide/protein-membrane interactions, and protein complexes at interfaces and demonstrates the ability of SFG on unveiling the molecular pictures of complicated interfacial biological processes.     

Protein deformation of lipid hybrid bilayer membranes studied by sum frequency generation vibrational spectroscopy

Structural deformations of lipid hybrid bilayer membranes induced by signal peptideless (SPL) proteins have been studied for the first time using the inherently surface specific nonlinear optical technique of sum frequency generation vibrational spectroscopy. Specifically, deformations of 1,2-distearoylphosphatidylglycerol(DSPG) membranes induced by interaction with FGF-1, a SPL protein which is released asa function of cellular stress through a nonclassical pathway, have been investigated. FGF-1 was found to induce lipid alkyl chain deformations in previously highly ordered DSPG membranes at the extremely low concentration of 1 nM at 60 degrees C. The deformation process was shown to exhibit a degree of reversibility upon removal of the protein by rinsing with buffer solution.     

Structure of butanol and hexanol at aqueous, ammonium bisulfate, and sulfuric acid solution surfaces investigated by vibrational sum frequency generation spectroscopy

The organization of 1-butanol and 1-hexanol at the air-liquid interface of aqueous, aqueous ammonium bisulfate, and sulfuric acid solutions was investigated using vibrational broad bandwidth sum frequency generation spectroscopy. There is spectroscopic evidence supporting the formation of centrosymmetric structures at the surface of pure butanol and pure hexanol. At aqueous, ammonium bisulfate, and at most sulfuric acid solution surfaces, butanol molecules organize in all-trans conformations. This suggests that butanol self-aggregates. The spectrum for the 0.052 M butanol in 59.5 wt % sulfuric acid solution is different from the other butanol solution spectra, that is, the surface butanol molecules are observed to possess a significant number of gauche defects. Relative to surface butanol, surface hexanol chains are more disordered at the surface of their respective solutions. Statistically, an increase in the number of gauche defects is expected for hexanol relative to butanol, a six carbon chain vs a four carbon chain. Yet, self-aggregation of hexanol at its aqueous solution surfaces is not ruled out because the methylene spectral contribution is relatively small. The surface spectra for butanol and hexanol also show evidence for salting out from the ammonium bisulfate solutions.     

Measuring polymer surface ordering differences in air and water by sum frequency generation vibrational spectroscopy

Molecular structures of poly(n-butyl methacrylate) (PBMA) at the PBMA/air and PBMA/water interfaces have been studied by sum frequency generation (SFG) vibrational spectroscopy. PBMA surfaces in both air and water are dominated by the methyl groups of the ester side chains. The average orientation and orientation distribution of these methyl groups at the PBMA/air and PBMA/water interfaces are different, indicating that surface restructuring occurs when the PBMA sample contacts water. Analysis shows that the orientation distribution of side chain methyl groups on the PBMA surface is narrower in water than that in air, indicating that the PBMA surface can be more ordered in water. To our knowledge, this is the first time that quantitative comparisons between molecular surface structures of polymers in air and in water have been made. Two assumptions on the orientation distribution function, including a Gaussian distribution and a formula based on the maximum entropy approach, are used in the analysis. It has been found that the orientation angle distribution function deduced by the Gaussian distribution and the maximum entropy distribution are quite similar, showing that the Gaussian distribution is a good approximation for the angle distribution. The effect of experimental error on the deduced orientational distribution is also discussed.     

Molecular responses of proteins at different interfacial environments detected by sum frequency generation vibrational spectroscopy

Sum frequency generation (SFG) vibrational spectroscopy has been applied to investigate molecular responses of bovine serum albumin (BSA) molecules adsorbed at different interfacial environments. Molecular level and in situ SFG studies demonstrate that albumin molecules have different adsorption behaviors when contact with fused silica, polystyrene, and poly(methyl methacrylate). Adsorbed albumin molecules exhibit different structural changes when exposed to different chemical environments, including air, water, and hydrophobic solvents. This paper provides direct molecular insight into protein responses to different interfacial environments.     

Probing the spontaneous membrane insertion of a tail-anchored membrane protein by sum frequency generation spectroscopy

In addition to providing a semipermeable barrier that protects a cell from harmful stimuli, lipid membranes occupy a central role in hosting a variety of biological processes, including cellular communications and membrane protein functions. Most importantly, protein-membrane interactions are implicated in a variety of diseases and therefore many analytical techniques were developed to study the basis of these interactions and their influence on the molecular architecture of the cell membrane. In this study, sum frequency generation (SFG) vibrational spectroscopy is used to investigate the spontaneous membrane insertion process of cytochrome b(5) and its mutants. Experimental results show a significant difference in the membrane insertion and orientation properties of these proteins, which can be correlated with their functional differences. In particular, our results correlate the nonfunctional property of a mutant cytochrome b(5) with its inability to insert into the lipid bilayer. The approach reported in this study could be used as a potential rapid screening tool in measuring the topology of membrane proteins as well as interactions of biomolecules with lipid bilayers in situ.     

Detection and spectral analysis of trifluoromethyl groups at a surface by sum frequency generation vibrational spectroscopy

Sum frequency generation (SFG) vibrational spectroscopy was used to detect the presence of trifluoromethyl groups on the surface of 4-(trifluoromethyl)benzyl alcohol (TFMBA) in air. Supplementary data from infrared and Raman spectra were correlated to ab initio calculations by use of density functional theory (DFT) for TFMBA and three related compounds to reliably assign vibrational modes to the spectra. It was shown that strongly ordered CF3 groups dominate the surface of the TFMBA, and the vibrational modes of this functional group are strongly coupled to the benzene ring of the benzyl alcohol. This coupling, along with the SFG activity of the CF3 group, is removed with the insertion of an oxygen atom between the CF3 group and the benzene ring.     

Preparation of alkanethiol monolayers on mild steel surfaces studied with sum frequency generation and electrochemistry

An n-alkanethiol, octadecanethiol (ODT), monolayer was successfully prepared onto an oxide-free mild steel (MS) surface under cathodic polarization in a 0.1 M LiCl/CH(3)OH solution containing 1 mM ODT. Cyclic voltammetry (CV) and electrochemical impedance (EIS) and sum frequency generation (SFG) spectroscopy were applied to study and characterize the adsorption of ODT at a MS surface. In 0.1 M LiCl/CH(3)OH solution containing 1 mM ODT, CV of the MS electrode shows a dramatic decrease in charging current and a positive shift in oxidation potential when compared to a solution without ODT. The interfacial capacitance was obtained as 2.52 microF/cm(2) from the impedance data. An average chain tilt angle of 48 degrees for the ODT molecules was deduced from the comparison of the interfacial capacitances of the ODT/MS and ODT/Au monolayers. X-ray photoelectron spectroscopy confirmed the formation of the ODT monolayer on mild steel. The ppp SFG spectrum of the ODT-modified MS features three strong methyl vibrational modes at 2877, 2943, and 2967 cm(-1), indicating the formation of the oriented and densely packed ODT monolayer. However, the appearance of the two weak CH(2) groups' vibrational modes at 2850 and 2914 cm(-1) implies the presence of defects in the ODT monolayer. ODT/Au films were prepared to compare with the ODT/MS films. Orientation analysis of the air/solid interface suggests that the methyl group of ODT/Au films has a tilt angle of 30 degrees , while the methyl group of ODT/MS films has a tilt angle of 23 degrees . Water was found to have an impact on the shape of the SFG spectra of ODT/MS. This suggests that the solution penetrated through the defects to reach the MS surface.     

Adsorption of ions on smooth and roughened silver surfaces: A comparative study by optical second harmonic generation

Optical second harmonic generation on silver electrode surfaces is shown to be highly sensitive to surface morphology at potentials within the double layer charging region. Slight alterations in the surface structure result in the appearance of a strong potential-dependent SH signal at biases negative to the potential of zero charge. As observed in previous studies on smooth silver electrodes, this signal is strongly affected by anion adsorption on the surface.     

Crystal-face dependence and photoetching-induced increases of dye-sensitized photocurrents at single-crystal rutile TiO2 surfaces

Dye-sensitized photocurrents at (100)-, (001)-, and (110)-cut TiO(2) rutile surfaces were increased by photoetching of TiO(2), but the increasing ratio strongly depended on the cut crystal faces and the illumination intensity for the photoetching. For the (110)-cut surface, the photocurrent increase was moderately large and in proportion to the increase in the surface area of TiO(2) induced by the photoetching, irrespective of the illumination intensity for the photoetching. On the other hand, the photocurrent increases for the (001)- and (100)-cut surfaces, especially that for the (001)-cut surface, were prominent and largely exceeded the increases in the surface area. The results were explained by taking into account the following factors: (1) The (001)- and (100)-cut surfaces were thermodynamically unstable in contrast to the (110)-cut surface and had thicker inactive surface layers (or higher densities of surface defects), produced by surface reconstruction during heat treatment of TiO(2) at 550 degrees C in a hydrogen atmosphere for getting n-type semiconductivity. (2) Photoetching not only increased the surface area through formation of nanoholes and grooves at the surface but also effectively removed the thin inactive surface layers (or surface defects).     

A combined vibrational sum frequency generation spectroscopy and atomic force microscopy study of sphingomyelin-cholesterol monolayers

A combination of vibrational sum frequency generation spectroscopy and atomic force microscopy is used to study the changes in morphology and conformational order in monolayers prepared from three natural sphingomyelin (SM) mixtures as a function of surface pressure and cholesterol concentration. The most homogeneous SM gave monolayers with well-ordered acyl chains and few gauche defects with relatively small effects of either increasing surface pressure or cholesterol addition. Heterogeneous SM mixtures with a mixture of acyl chain lengths or with significant fractions of unsaturated acyl chains had much larger contributions from gauche defects at low surface pressure and gave increasingly well-ordered monolayers as the surface pressure increased. They also showed substantial increases in lipid chain order after cholesterol addition. Overall, these results are consistent with the strong hydrogen bonding capacity of SM leading to well-ordered monolayers over a range of surface pressures. The changes in acyl chain order for natural SMs as a function of cholesterol are relevant to formation of sphingolipid-cholesterol enriched domains in cell membranes.