A new family of dinuclear rhodium complexes containing tertiary phosphanes in a semibridging or doubly bridging bonding mode

The reactions of [Rh(2)Cl(kappa(2)-acac)(mu-CPh(2))(2)(mu-SbiPr(3))] (3) and [Rh(2)(kappa(2)-acac)(2)(mu-CPh(2))(2)(mu-SbiPr(3))] (4) with PMe(3) lead to exchange of the bridging ligand and afford the novel PMe(3)-bridged counterparts 5 and 6, in which the phosphane occupies a semibridging (5) or a doubly bridging (6) position. In both cases, the bonding mode was confirmed crystallographically. Treatment of 6 with CO causes a shift of PMe(3) from a bridging to a terminal position and gives the unsymmetrical complex [(kappa(2)-acac)Rh(mu-CPh(2))(2)(mu-CO)Rh(PMe(3))(kappa(2)-acac)] (7). Similarly to 5 and 6, the related compounds 10 and 11 with one or two acac-f(3) ligands were prepared. While both PEt(3) and PnBu(3) react with 3 by exchange of the bridging stibane for phosphane to give compounds 12 and 13, the reactions of 4 with PMePh(2) and PnBu(3) afford the mixed-valent Rh(0)Rh(II) complexes [(PR(3))Rh(mu-CPh(2))(2)Rh(kappa(2)-acac)(2)] (17, 18) in high yields. In contrast, treatment of 4 with PEt(3) and PMe(2)Ph generates the phosphane-bridged compounds [Rh(2)(kappa(2)-acac)(2)(mu-CPh(2))(2)(mu-PR(3))] (14, 15) exclusively. Stirring a solution of 14 (R=Et) in benzene for 15 h at room temperature leads to complete conversion to the mixed-valent isomer 16. The reaction of 6 with an equimolar amount of CR(3)CO(2)H (R=F, H) or phenol in the molar ratio of 1:10 results in substitution of one acac by one trifluoracetate, acetate, or phenolate ligand without disturbing the [Rh(2)(mu-CPh(2))(2)(mu-PR(3))] core. From 6 and an excess of CR(3)CO(2)H, the symmetrical bis(trifluoracetato) and bis(acetate) derivatives [Rh(2)(kappa(2)-O(2)CCR(3))(2)(mu-CPh(2))(2)(mu-PMe(3))] (21, 22) were obtained.     

A new family of mixed-valence dinuclear rhodium complexes containing the two metal centers in different stereochemical environments

A series of dinuclear chelate complexes of the general composition [Rh2(kappa2-L)2(mu-CR2)2(mu-SbiPr3)] (R = Ph, p-Tol; L = CF3CO2-, acac-, acac-f3-) and [Rh2Cl(kappa2-L)(mu-CR2)2(mu-SbiPr3)] (R = Ph, p-Tol; L = acac-, acac-f3-) has been prepared by replacement of the chloro ligands in the precursors [Rh2Cl2(mu-CR2)2(mu-SbiPr3)] by anionic chelates. The lability of the SbiPr3 bridge in the rhodium dimers is illustrated by the reactions of [Rh2(kappa2-acac)2(mu-CR2)2(mu-SbiPr3)] (7, 8) with Lewis bases such as CO, CNtBu, and SbEt3 which lead to the formation of the substitution products [Rh2(kappa2-acac)2(mu-CR2)2(mu-L')] (13-16) in excellent yields. Treatment of 7 and 8 with sterically demanding tertiary phosphanes PR3 (R3 = iPr3, iPr2Ph, iPrPh2, Ph3) affords the mixed-valence Rh0-RhII complexes [(kappa2-acac)2Rh(mu-CPh2)2Rh(PR3)] (21-24) and [(kappa2-acac)2Rh(mu-C(p-Tol)2]2Rh(PiPr3)] (25) for which there is no precedence. The terminal PiPr3 ligand of 21 is easily displaced by alkynes, CNtBu, and CO to give, by preserving the [(kappa2-acac)2Rh(mu-CPh2)2Rh] molecular core, the related dinuclear compounds 26-31 in which the coordination number of the Rh0 center is 3, 4, or 5. The molecular structures of [Rh2Cl(kappa2-acac)(mu-CPh2)2(mu-SbiPr3)] (5), [Rh2(kappa2-acac)2(mu-CPh2)2(mu-CO)] (13), [(kappa2-acac)2Rh(mu-CPh2)2Rh(PiPr3)] (21), and [(kappa2-acac)2Rh(mu-CPh2)2Rh(CNtBu)2] (30) have been determined crystallographically.     

Bis-phosphites and bis-phosphinites based on distally-functionalised calix[4]arenes: coordination chemistry and use in rhodium-catalysed, low-pressure olefin hydroformylation

Six calix[4]arenes each bearing two non-cyclic PR2 units attached at distal phenolic oxygen atoms, p-Bu t-calix[4]arene-25,27-(OPR2)2-26,28-(OR')2(R = OPh; R'= Prn, L1; R = OPh; R'= CH2CO2Et, L2; R= OPh; R'= CO2 cholesteryl, L3; R = Ph; R'= Prn, 4; R = Ph; R'= CH2CO2Et, L5; R = Ph; R'= CO2cholesteryl, L6) have been synthesized and their coordinative properties investigated. The diphosphites L1-L3, where the P centres are separated by 12 bonds, readily form chelate complexes provided the complexation reaction is achieved either by using a starting complex that possesses good leaving groups or by operating under high dilution in order to avoid oligomer formation. Thus, the cationic complexes [Rh(COD)L1]BF4 and [Rh(COD)L3]BF4 were both formed in high yield by reacting the appropriate diphosphite with either [Rh(COD)(THF)2]BF4 or [Rh(COD)2]BF4. At high dilution, reaction of L3 with the neutral complex [PdCl2(COD)] afforded the chelate complex [PdCl2L3] in 90% yield. The reaction of one equiv. of L1 with [Rh(acac)(CO)2] resulted in the formation of [Rh(acac)L1] without requiring high dilution conditions. When the latter reaction was carried out with 0.5 equiv. of L1, the bimetallic complex [{Rh(acac)(CO)}2(eta]1-P,eta1-P'-L1)] was formed instead. Reaction at high dilution of with the cyclometallated complex [Pd(o-C6H4CH2NMe2)(THF)2]BF4 gave the expected chelate complex [Pd(o-C6H4CH2NMe2)]BF4. The latter slowly converts in solution to an oligomer in which the ligand behaves as a (eta1-P,eta1-P') bridging ligand, thus leading to a less strained structure. All six ligands, when mixed with [Rh(acac)CO2], effectively catalyse the hydroformylation of octene and styrene. In the hydroformylation of octene, the linear aldehyde selectivities observed with L2 and L3 are significantly higher (linear : branched =ca. 10) than those obtained with the other 4 ligands of this study and also with respect to PPh3. Molecular modelling shows that the lower rim substituents of and form tighter pockets about the metal centre than do the other ligands and so sterically favour the formation of Rh(n-alkyl) intermediates over that of Rh(i-alkyl) ones. In styrene hydroformylation, all ligands result in the formation of unusually high amounts of the linear aldehyde, the b : l ratios being all close to 65 : 35. The highest activities were found when using an L/Rh ratio of 1/1.     

New diphosphine ligands containing ethyleneglycol and amino alcohol spacers for the rhodium-catalyzed carbonylation of methanol

The new diphosphine ligands Ph(2)PC(6)H(4)C(O)X(CH(2))(2)OC(O)C(6)H(4)PPh(2) (1: X=NH; 2: X=NPh; 3: X=O) and Ph(2)PC(6)H(4)C(O)O(CH(2))(2)O(CH(2))(2)OC(O)C(6)H(4)PPh(2) (5) as well as the monophosphine ligand Ph(2)PC(6)H(4)C(O)X(CH(2))(2)OH (4) have been prepared from 2-diphenylphosphinobenzoic acid and the corresponding amino alcohols or diols. Coordination of the diphosphine ligands to rhodium, iridium, and platinum resulted in the formation of the square-planar complexes [(Pbond;P)Rh(CO)Cl] (6: Pbond;P=1; 7: Pbond;P=2; 8: Pbond;P=3), [(Pbond;P)Rh(CO)Cl](2) (9: Pbond;P=5), [(P-P)Ir(cod)Cl] (10: Pbond;P=1; 11: Pbond;P=2; 12: Pbond;P=3), [(Pbond;P)Ir(CO)Cl] (13: Pbond;P=1; 14: Pbond;P=2; 15: Pbond;P=3), and [(Pbond;P)PtI(2)] (18: Pbond;P=2). In all complexes, the diphosphine ligands are trans coordinated to the metal center, thanks to the large spacer groups, which allow the two phosphorus atoms to occupy opposite positions in the square-planar coordination geometry. The trans coordination is demonstrated unambiguously by the single-crystal X-ray structure analysis of complex 18. In the case of the diphosphine ligand 5, the spacer group is so large that dinuclear complexes with ligand 5 in bridging positions are formed, maintaining the trans coordination of the P atoms on each metal center, as shown by the crystal structure analysis of 9. The monophosphine ligand 4 reacts with [[Ir(cod)Cl](2)] (cod=cyclooctadiene) to give the simple derivative [(4)Ir(cod)Cl] (16) which is converted into the carbonyl complex [(4)Ir(CO)(2)Cl] (17) with carbon monoxide. The crystal structure analysis of 16 also reveals a square-planar coordination geometry in which the phosphine ligand occupies a position cis with respect to the chloro ligand. The diphosphine ligands 1, 2, 3, and 5 have been tested as cocatalysts in combination with the catalyst precursors [[Rh(CO)(2)Cl](2)] and [[Ir(cod)Cl](2)] or [H(2)IrCl(6)] for the carbonylation of methanol at 170 degrees C and 22 bar CO. The best results (TON 800 after 15 min) are obtained for the combination 2/[[Rh(CO)(2)Cl](2)]. After the catalytic reaction, complex 7 is identified in the reaction mixture and can be isolated; it is active for further runs without loss of catalytic activity.     

The bridging function of an apparently nonbridging ligand: dinuclear rhodium complexes with Rh(mu-SbR3)Rh as a molecular unit

Novel dinuclear rhodium complexes of the general composition [Rh2Cl2(mu-CRR')2(mu-SbiPr3)] (4-6) were prepared by thermolysis of the mononuclear precursors trans-[RhCl(=CRR')(SbiPr3)2] in excellent yield. The X-ray crystal structure analysis of 4 (R = R' = Ph) confirms the symmetrical bridging position of the stibane ligand. Related compounds [Rh2Cl2(mu-CPh2)(mu-CRR')(mu-SbiPr3)] (7, 8) with two different carbene units were obtained either from trans-[RhCl(=CPh2)(SbiPr3)2] (1) and RR'CN2 or by a conproportionation of 4 and 5 (R = R' = p-Tol) or 4 and 6 (R= Ph, R' = p-Tol), respectively. While CO reacts with 4 to give the polymeric product [[RhCl(CPh2)(CO)]n] (9), tert-butyl isocyanide replaces the bridging stibane and yields [Rh2Cl2(mu-CPh2)2(mu-CNtBu)] (10). The reaction of 4 with tertiary phosphanes PR3 leads to complete bridge cleavage and affords the mononuclear compounds trans-[RhCl(=CPh2)(PR3)2] (11-15). In contrast, treatment of 4 with SbMe3 and SbEt3 yields the related triply bridged complexes [Rh2Cl2(mu-CPh2)2(mu-SbR3)] (16, 17) by substitution of SbiPr3 for the smaller stibanes. The displacement of the chloro ligands in 4-6 and 10 by n5-cyclopentadienyl gives the dinuclear complexes [(n5-C5H5)2Rh2(mu-CRR')2] (18-20) and [(n5-C5H5)2Rh2(mu-CPh2)2(mu-CNtBu)] (21), of which 18 (R = R' = Ph) was characterized crystallographically.     

On the reaction of Ph2PNHPPh2 with RNCS (R=Et, Ph, p-NO2C6H4): preparation of the zwitterionic ligand EtNHC(S)Ph2P==NPPh2C(S)NEt (HSNS) and the zwitterionic metalate [(SNS)Rh(CO)

The reaction of Ph(2)PNHPPh(2) (PNP) with RNCS (Et, Ph, p-NO(2)(C(6)H(4))) gives addition products resulting from the attack of the P atoms of PNP on the electrophilic carbon atom of the isothiocyanate. When PNP is reacted with EtNCS in a 1:2 molar ratio, the zwitterionic molecule EtNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)Et (HSNS) is obtained in high yield. HSNS can be protonated (H(2)SNS(+)) or deprotonated (SNS(-)), behaving in the latter form as an S,N,S-donor pincer ligand. The reaction of HSNS with [(acac)Rh(CO)(2)] (acac=acetylacetonate) affords the zwitterionic metalate [(SNS)Rh(CO)]. Other products can be obtained depending on the R group, the PNP/RNCS ratio (1:1 or 1:2), and the reaction temperature. The proposed product of the primary attack of PNP on RNCS, Ph(2)PN==PPh(2)C(S)NHR (A), cannot be isolated. Reaction of A with another RNCS molecule leads to 1:2 addition compounds of the general formula RNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)R (1), which can rearrange into the non-zwitterionic product RNHC(S)PPh(2)==NP(S)Ph(2) (2) by eliminating a molecule of RNC. Two molecules of A can react together, yielding 1:1 PNP/RNCS zwitterionic products of the formula RNHCH[PPh(2)==NP(S)Ph(2)]PPh(2)==NP(+)Ph(2)C(S)N(-)R (3). Compound 3 can then rearrange into RNHCH[PPh(2)==NP(S)Ph(2)](2) (4) by losing a RNC molecule. When R=Et (a), compounds 1 a, 2 a (HSNS), and 4 a have been isolated and characterized. When R=Ph (b), compounds 2 b and 4 b can be prepared in high yield. When R=p-NO(2)C(6)H(4) (c), only compound 3 c is observed and isolated in high yield. The crystal structures of HSNS, [(SNS)Rh(CO)], and of the most representative products have been determined by X-ray diffraction methods.     

Dichroic, dinuclear mu2-(eta2-NO)-nitrosoaniline-bridged complexes of rhenium of the type [[(CO)3Re(mu-X)]2ONC6H4NR2] (X = Cl, Br, I; R = Me, Et)

A series of unusual dinuclear mu2-(eta2-NO)-nitrosoaniline-bridged complexes [[(CO)3Re(mu-X)]2ONC6H4NR2] (X = Cl, Br, I; R = Me, Et) with dichroic properties have been synthesised by reaction of pentacarbonylhalogenorhenium(I) [(CO)5ReX] (X = Cl, Br, I) with the corresponding nitrosoaniline derivatives R2NC6H4NO (R = Me, Et). The deeply coloured solutions in CH2Cl2 show broad UV/Vis absorptions from 595 to 620 nm depending on the halogen bridges and N substituents. Single crystals of all six compounds exhibit a pronounced linear dichroism. The molecular structures have been determined by single-crystal X-ray analyses. All the compounds contain two face-shared octahedra, with two halogens and one NO ligand as bridges. The NO ligand coordinates in a nonsymmetrical eta2-like fashion with N or O coordination to each Re centre. Therefore, the C-nitroso group and the planar NC2 moiety of NR2 both lie almost exactly within the symmetry plane of the dinuclear complexes. These complexes belong to the novel and simple class of neutral dinuclear C-nitroso complexes that include the rare, non-assisted mu2-(eta2-NO) ligand function and have only single halogen atoms in bridging positions.     

Interplay between solvent and counteranion stabilization of highly unsaturated rhodium(III) complexes: facile unsaturation-induced dearomatization

Abstraction of the chloride ligand from the PCN-based chloromethylrhodium complex 2 by AgX (X=BF(4)(-), CF(3)SO(3)(-)) or a direct C-C cleavage reaction of the PCN ligand 1 with [(coe)(2)Rh(solv)(n)](+)X(-) (coe=cyclooctene) lead to the formation of the coordinatively unsaturated rhodium(III) complexes 3. Compound 3 a (X=BF(4)(-)) exhibits a unique medium effect; the metal center is stabilized by reversible coordination of the bulky counteranion or solvent as a function of temperature. Reaction of [(PCN)Rh(CH(3))(Cl)] with AgBAr(f) in diethyl ether leads to an apparent rhodium(III) 14-electron complex 4, which is stabilized by reversible, weak coordination of a solvent molecule. This complex coordinates donors as weak as diethyl ether and dichloromethane. Upon substitution of the BF(4)(-) ion in [(PCN)Rh(CH(3))]BF(4) by the noncoordinating BAr(f)(-) ion in a noncoordinating medium, the resulting highly unsaturated intermediate undergoes a 1,2-metal-to-carbon methyl shift, followed by beta-hydrogen elimination, leading to the Rh-stabilized methylene arenium complex 5. This process represents a unique mild, dearomatization of the aromatic system induced by unsaturation.     

Activation and functionalization of white phosphorus at rhodium: experimental and computational analysis of the [(triphos)Rh (eta1:eta2-P4RR')]Y complexes (triphos=MeC(CH2PPh2)3; R=H, Alkyl, Aryl; R'=2 electrons, H, Me)

Thermal reaction of white phosphorus with [(triphos)RhH(3)] (1) in THF affords [(triphos)Rh(eta(1):eta(2)-P(4)H)] (2), triphos=MeC(CH(2)PPh(2))(3). Similar complexes [(triphos)Rh(eta(1):eta(2)-P(4)R)] (R=Me (7), Et (8), Ph (9)) also form at lower temperature by the reaction of P(4) and [(triphos)Rh(R)(eta(2)-C(2)H(4))] with elimination of ethene. In contrast, a double-insertion process follows the reaction of [(triphos)Rh(H)(eta(2)-C(2)H(4))] and P(4) to generate tetraphosphido ethyl complex 8. Compounds 2, 7, 8 and 9 are thermally unstable and eventually decompose into the cyclotriphosphorus complex [(triphos)Rh(eta(3)-P(3))] (3) plus other unidentified phosphorus-containing species. Otherwise, PH(3) or PH(2)R is generated in the presence of H(2). The formation of PH(3) and 3 is quantitative starting from the precursor 2. The electrophilic attack of MeOTf or HBF(4) on the P(4)R ligand in the complexes 2, 7-9 is regioselective, and yields a cationic product of formula [(triphos)Rh(eta(1):eta(2)-P(4)RR')](+). The direct attack on the substituted p-R phosphorus atom is demonstrated by crossing experiments. Complexes of the latter type have been isolated in the solid state for the combinations R=H and R'=Me (11) or R=Ph and R'=Me (12). The latter species, [(triphos)Rh(eta(1):eta(2)-P(4)PhMe')]OTf.2 CH(2)Cl(2) (OTf=triflate), has been characterised by X-ray methods. The geometry at the metal is better described as a trigonal bipyramidal than pseudo-octahedral. In fact, the P(4)RR' unit acts as a bidentate ligand with its exocyclic PR(2) donor group and the endocyclic, dihapto-coordinated Pdbond;P linkage. The latter group lies in the equatorial plane, in a similar way to a classic olefin ligand that is coordinated to a butterfly-shaped L(4)M fragment (M=d(8)). DFT calculations on a model of 2 and all possible protonated isomers confirm that double substitution at the exocyclic P-donor positions of the open P(4) unit is energetically favoured. A multinuclear and multidimensional NMR analysis confirms that this structure is maintained in solution for both the parent and the protonated compounds.     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

Mononuclear Rh(II) PNP-type complexes. Structure and reactivity

The Rh(II) mononuclear complexes [(PNPtBu)RhCl][BF4] (2), [(PNPtBu)Rh(OC(O)CF3)][OC(O)CF3] (4), and [(PNPtBu)Rh(acetone)][BF4]2 (6) were synthesized by oxidation of the corresponding Rh(I) analogs with silver salts. On the other hand, treatment of (PNPtBu)RhCl with AgOC(O)CF3 led only to chloride abstraction, with no oxidation. 2 and 6 were characterized by X-ray diffraction, EPR, cyclic voltammetry, and dipole moment measurements. 2 and 6 react with NO gas to give the diamagnetic complexes [(PNPtBu)Rh(NO)Cl][BF4] (7) and [(PNPtBu)Rh(NO)(acetone)][BF4]2 (8) respectively. 6 is reduced to Rh(I) in the presence of phosphines, CO, or isonitriles to give the Rh(I) complexes [(PNPtBu)Rh(PR3)][BF4] (11, 12) (R = Et, Ph), [(PNPtBu)Rh(CO)][BF4] (13) and [(PNPtBu)Rh(L)][BF4] (15, 16) (L = tert-butyl isonitrile or 2,6-dimethylphenyl isonitrile), respectively. On the other hand, 2 disproportionates to Rh(I) and Rh(III) complexes in the presence of acetonitrile, isonitriles, or CO. 2 is also reduced by triethylphosphine and water to Rh(I) complexes [(PNPtBu)RhCl] (1) and [(PNPtBu)Rh(PEt3)][BF4] (11). When triphenylphosphine and water are used, the reduced Rh(I) complex reacts with a proton, which is formed in the redox reaction, to give a Rh(III) complex with a coordinated BF4, [(PNPtBu)Rh(Cl)(H)(BF4)] (9).     

Carbenerhodium complexes of the half-sandwich-type: synthesis, substitution, and addition reactions

A series of carbenerhodium(I) complexes of the general composition [(eta5-C5H5)Rh(=CRR')(L)] (2a-2i) with R = R'= aryl and L = SbiPr3 or PR3 has been prepared from the square-planar precursors trans-[RhCl(=CRR')(L)2] and NaC5H5 in excellent yields. Reaction of the triisopropylsibane derivative 2a. which contains a rather labile Rh-Sb bond, with CO, PMe3, and CNR (R = Me, CH2Ph, tBu) leads to the displacement of the SbiPr3 ligand and affords the substitution products [(eta5-C5H5)Rh(=CPh2)(L)] (3-7). In contrast, treatment of the triisopropylphosphane compound 2c with CO and CNtBu leads to the cleavage of the Rh=CPh2 bond and gives besides [(eta5-C5H5)Rh(PiPr3)(L)] (10, 12) by metal-assisted C-C coupling diphenylketene Ph2C=C=O (11) or the corresponding imine Ph2C=C=NtBu (13). While the reaction of 2a, c with C2H4 yields [(eta5-C5H5)Rh(C2H4)(L)] (14, 15) and the trisubstituted olefin Ph2C=CHCH3 (16), treatment of 2a, c with RN3 leads to the cleavage of both the Rh-EiPr3 and Rh=CPh2 bonds and gives the chelate complexes [(eta5-C5H5)Rh(kappa2-RNNNNR)] (19, 20). The substitution products 3 (L=CO) and 4 (L= PMe3) react with an equimolar amount of sulfur or selenium by addition of the chalcogen to the Rh=CPh2 bond to generate the complexes [(eta5-C5H5)Rh(kappa2-ECPh2)(L)] (21-24) with thio- or selenobenzophenone as ligand. Similarly, treatment of 3 with CuCl affords the unusual 1:2 adduct [(eta5-C5H5)(CO)Rh(mu-CPh2)(CuCl)2] (25), which reacts with NaC5H5 to form [(eta5-C5H5)(CO)Rh(muCPh2)Cu(eta5-C5H5)] (26). The molecular structures of 3 and 22 have been determined by X-ray crystallography.     

Direct observation of reductive elimination of methyl iodide from a rhodium(III) pincer complex: the importance of sterics

A rare case of directly observed alkyl halide reductive elimination from rhodium is reported. Treatment of the naphthyl-based PCP-type Rh(III) methyl complexes 2a,b [(C10H5(CH2PR2)2)Rh(CH3)(I)] (R = iPr 2a, R = tBu 2b) with CO resulted in facile reductive elimination of methyl iodide in the case of 2b, yielding the Rh(I) carbonyl complex [(C10H5(CH2PR2)2)Rh(CO)] 3b (R = tBu), while the less bulky 2a formed CO adducts and did not undergo reductive elimination, contrary to expectations based on electron density considerations. Moreover, 3b oxidatively added methyl iodide, while 3a did not. CD3I/CH3I exchange studies in the absence of CO indicate that reversible formation of (ligated) methyl iodide takes place in both systems. Subsequently, when CO is present, it displaces methyl iodide in the bulkier tBu system, whereas with the iPr system formation of the Rh(III) CO adducts is favored. Iodide dissociation followed by its attack on the rhodium-methyl group is unlikely.     

A series of dinuclear homo- and heterometallic complexes with two or three bridging sulfido ligands derived from the tungsten tris(sulfido) complex [Et(4)N][(Me(2)Tp)WS(3)] (Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate)

The generation of heterobimetallic complexes with two or three bridging sulfido ligands from mononuclear tris(sulfido) complex of tungsten [Et(4)N][(Me(2)Tp)WS(3)] (1; Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate) and organometallic precursors is reported. Treatment of 1 with stoichiometric amounts of metal complexes such as [M(PPh(3))(4)] (M = Pt, Pd), [(PtMe(3))(4)(micro(3)-I)(4)], [M(cod)(PPh(3))(2)][PF(6)] (M = Ir, Rh; cod = 1,5-cyclooctadiene), [Rh(cod)(dppe)][PF(6)] (dppe = Ph(2)PCH(2)CH(2)PPh(2)), [CpIr(MeCN)(3)][PF(6)](2) (Cp = eta(5)-C(5)Me(5)), [CpRu(MeCN)(3)][PF(6)], and [M(CO)(3)(MeCN)(3)] (M = Mo, W) in MeCN or MeCN-THF at room temperature afforded either the doubly bridged complexes [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)M(PPh(3))] (M = Pt (3), Pd (4)), [(Me(2)Tp)W(=S)(micro-S)(2)M(cod)] (M = Ir, Rh (7)), [(Me(2)Tp)W(=S)(micro-S)(2)Rh(dppe)], [(Me(2)Tp)W(=S)(micro-S)(2)RuCp] (10), and [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)W(CO)(3)] (12) or the triply bridged complexes including [(Me(2)Tp)W(micro-S)(3)PtMe(3)] (5), [(Me(2)Tp)W(micro-S)(3)IrCp][PF(6)] (9), and [Et(4)N][(Me(2)Tp)W(micro-S)(3)Mo(CO)(3)] (11), depending on the nature of the incorporated metal fragment. The X-ray analyses have been undertaken to clarify the detailed structures of 3-5, 7, and 9-12.     

Early-late heterobimetallic alkoxides as model systems for late-transition-metal catalysts supported on titania

Titanium complexes with chelating alkoxide ligands [TiCp*(O(2)Bz)(OBzOH)] (1) and [TiCp*(Me)((OCH(2))(2)Py)] (2) were synthesised by reaction of [TiCp*Me(3)] (Cp*=eta(5)-C(5)Me(5)) with 2-hydroxybenzyl alcohol ((HO)(2)Bz) and 2,6-pyridinedimethanol ((HOCH(2))(2)Py), respectively. Complex 1 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) to yield the early-late heterobimetallic complexes [TiCp*(O(2)Bz)(2)M(cod)] [M=Rh (3), Ir (4)]. Carbon monoxide readily replaces the COD ligand in 3 to give the rhodium dicarbonyl derivative [TiCp*(O(2)Bz)(2)Rh(CO)(2)] (5). Compound 2 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) with protonolysis of a Tibond;Me bond to give [TiCp*((OCH(2))(2)Py)(mu-O)M(cod)] [M=Rh (6), Ir (7)]. The molecular structures of complexes 3, 5 and 7 were established by single-crystal X-ray diffraction studies.     

Dimethylsulfoxide as a ligand for RhI and IrI complexes--isolation, structure, and reactivity towards X-H bonds (X=H, OH, OCH3)

Novel neutral and cationic Rh(I) and Ir(I) complexes that contain only DMSO molecules as dative ligands with S-, O-, and bridging S,O-binding modes were isolated and characterized. The neutral derivatives [RhCl(DMSO)(3)] (1) and [IrCl(DMSO)(3)] (2) were synthesized from the dimeric precursors [M(2)Cl(2)(coe)(4)] (M=Rh, Ir; COE=cyclooctene). The dimeric Ir(I) compound [Ir(2)Cl(2)(DMSO)(4)] (3) was obtained from 2. The first example of a square-planar complex with a bidentate S,O-bridging DMSO ligand, [(coe)(DMSO)Rh(micro-Cl)(micro-DMSO)RhCl(DMSO)] (4), was obtained by treating [Rh(2)Cl(2)(coe)(4)] with three equivalents of DMSO. The mixed DMSO-olefin complex [IrCl(cod)(DMSO)] (5, COD=cyclooctadiene) was generated from [Ir(2)Cl(2)(cod)(2)]. Substitution reactions of these neutral systems afforded the complexes [RhCl(py)(DMSO)(2)] (6), [IrCl(py)(DMSO)(2)] (7), [IrCl(iPr(3)P)(DMSO)(2)] (8), [RhCl(dmbpy)(DMSO)] (9, dmbpy=4,4'-dimethyl-2,2'-bipyridine), and [IrCl(dmbpy)(DMSO)] (10). The cationic O-bound complex [Rh(cod)(DMSO)(2)]BF(4) (11) was synthesized from [Rh(cod)(2)]BF(4). Treatment of the cationic complexes [M(coe)(2)(O=CMe(2))(2)]PF(6) (M=Rh, Ir) with DMSO gave the mixed S- and O-bound DMSO complexes [M(DMSO)(2)(DMSO)(2)]PF(6) (Rh=12; Ir=in situ characterization). Substitution of the O-bound DMSO ligands with dmbpy or pyridine resulted in the isolation of [Rh(dmbpy)(DMSO)(2)]PF(6) (13) and [Ir(py)(2)(DMSO)(2)]PF(6) (14). Oxidative addition of hydrogen to [IrCl(DMSO)(3)] (2) gave the kinetic product fac-[Ir(H)(2)Cl(DMSO)(3)] (15) which was then easily converted to the more thermodynamically stable product mer-[Ir(H)(2)Cl(DMSO)(3)] (16). Oxidative addition of water to both neutral and cationic Ir(I) DMSO complexes gave the corresponding hydrido-hydroxo addition products syn-[(DMSO)(2)HIr(micro-OH)(2)(micro-Cl)IrH(DMSO)(2)][IrCl(2)(DMSO)(2)] (17) and anti-[(DMSO)(2)(DMSO)HIr(micro-OH)(2)IrH(DMSO)(2)(DMSO)][PF(6)](2) (18). The cationic [Ir(DMSO)(2)(DMSO)(2)]PF(6) complex (formed in situ from [Ir(coe)(2)(O=CMe(2))(2)]PF(6)) also reacts with methanol to give the hydrido-alkoxo complex syn-[(DMSO)(2)HIr(micro-OCH(3))(3)IrH(DMSO)(2)]PF(6) (19). Complexes 1, 2, 4, 5, 11, 12, 14, 17, 18, and 19 were characterized by crystallography.     

Reactions of mu3-alkenyl triruthenium carbonyl clusters with alkynes: synthesis of trinuclear mu-//-alkyne, mu-vinylidene, and mu-dienoyl derivatives

The reactions of doubly face-capped triruthenium cluster complexes of the type [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu(3)-kappa(2)-R(2)CCHR(1))(mu-CO)(2)(CO)(6)] (HNNMe(2) = 1,1-dimethylhydrazide; R(2)CCHR(1) = alkenyl ligand) with terminal and internal alkynes have been studied in refluxing toluene. The following derivatives have been isolated from these reactions: [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu(3)-kappa(2)-R(2)CCHR(1))(mu-kappa(2)-//-HCCH)(CO)(7)] (R(1) = R(2) = H, 5; R(1) = Ph, R(2) = H, 6; R(1) = CH(2)OMe, R(2) = H, 7 a; R(1) = H, R(2) = CH(2)OMe, 7 b) from acetylene, [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu(3)-kappa(2)-HCCH(2))(mu-kappa(2)-//-PhCCPh)(CO)(7)] (11) from diphenylacetylene, and three isomers of [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu(3)-kappa(2)-HCCH(2))(mu-kappa(2)-//-PhCCH)(CO)(7)] (14, 15 a, and 15 b) from phenylacetylene. These products result from substitution of a CO ligand by the alkyne and contain an Ru--Ru edge bridged by the alkyne ligand in a parallel manner. DFT calculations on selected isomeric products have helped to establish that the type of Ru--Ru edge bridged by the alkyne depends more on kinetic factors related to the size of the alkyne substituents than on the thermodynamic stability of the final products. The preparation of triruthenium cluster complexes with mu-//-alkyne ligands is unprecedented and seems to relate to the fact that the starting trinuclear complexes have their two triangular faces protected by capping ligands. The clusters bearing mu-//-acetylene (5-7) are thermodynamically unstable with respect to their transformation into edge-bridging vinylidene derivatives, [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu(3)-kappa(2)-HCCHR)(mu-kappa(1)-CCH(2))(CO)(7)] (R = H, 8; Ph, 9; CH(2)OMe, 10). DFT calculations have shown that complex 8 is 11.2 kcal mol(-1) more stable than its precursor 5. The thermolysis of compound 11 leads to [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu-kappa(4)-H(2)CCHCPhCPhCO)(mu-CO)(2)(CO)(5)] (12), which contains a novel edge-bridging dienoyl ligand that arises from an unusual coupling of diphenylacetylene, carbon monoxide, and the ethenyl ligand of complex 11. A chloro-bridged dimer of trinuclear clusters, [Ru(6)(mu-Cl)(2)(mu(3)-kappa(2)-HNNMe(2))(2)(mu(3)-kappa(2)-HCCH(2))(2)(mu-kappa(2)-PhCCHPh)(2)(mu-CO)(2)(CO)(10)] (13), has been prepared by treating compound 11 with hydrogen chloride. Therefore, edge-bridging parallel alkynes are susceptible to protonation to give edge-bridging alkenyl ligands. Compound 13 is the first complex to contain two alkenyl ligands on a trinuclear cluster, one face-capping and the other edge-bridging.     

Ambiphilic diphosphine-borane ligands: metal-->borane interactions within isoelectronic complexes of rhodium, platinum and palladium

Coordination of an ambiphilic diphosphine-borane (DPB) ligand to the RhCl(CO) fragment affords two isomeric complexes. According to X-ray diffraction analysis, each complex adopts a square-pyramidal geometry with trans coordination of the two phosphine buttresses and axial RhB contacts, but the two differ in the relative orientations around the rhodium and boron centres. DFT calculations on the actual complexes provide insight into the influence of the pi-accepting CO co-ligand, compared with previously reported complexes [Rh(mu-Cl)(dpb)]2 and [RhCl(dmap)(dpb)]. In addition, comparison of the nu(CO) frequency of [RhCl(CO)(dpb)] with that of the related borane-free complex [RhCl(CO)(iPr2PPh)2] substantiates the significant electron-withdrawing effect that the sigma-accepting borane moiety exerts on the metal. Valence isoelectronic [PtCl2(dpb)] and [PdCl2(dpb)] complexes have also been prepared and characterized spectroscopically and structurally. The pronounced influence of the transition metal on the magnitude of the M-->B interaction is highlighted by geometric considerations and NBO analyses.     

Aromaticity of benzene in the facial coordination mode: a structural and theoretical study

The effects of facial coordination of benzene to a trinuclear transition-metal cluster have been studied by structure correlation and DFT calculational methods. Data taken from the X-ray crystal structures of twelve complexes [(eta-C(5)H(4)R")Co(3)(micro(3)-eta(2):eta(2):eta(2)-C(6)H(4)RR')] 1 b-1 m were analyzed by using standard statistical methods. The prototypal facial arene ligand is considerably expanded with respect to free benzene and shows a small but highly significant Kekulè distortion (d(CC)=1.42, 1.45 A). DFT MO calculations were carried out on the model complexes [(eta-C(5)H(5))M(3)(micro-eta(2):eta(2):eta(2)-C(6)H(6))] 1 a (M=Co), 2 (M=Rh), and 3 (M=Ir). Ring currents in the facial benzene and apical cyclopentadienyl ligands have been assessed by nucleus independent chemical shift (NICS) calculations. Compared to the free ligand (with the optimized D(6h) structure as well as with D(3h) and a C(3v) geometries similar to that in the prototypal facial arene), facial benzene exhibits somewhat reduced but still substantial cyclic electron delocalization (CED). The calculated order of CED is benzene approximately [(CO)(3)Cr(eta-C(6)H(6))] 4 > 1 > 2 > 3.     

Rhodium(I) and Rhodium(III) complexes containing the chiral ligand 2,6-bis[4'(S)-isopropyloxazolin-2'-yl]pyridine (pybox): an unprecedented monohapto coordination of pybox

The complex [Rh(kappa(3)-N,N,N-pybox)(CO)][PF(6)] (1) has been prepared by reaction of the precursor [Rh(mu-Cl)(eta(2)-C(2)H(4))(2)](2), 2,6-bis[4'(S)-isopropyloxazolin-2'-yl]pyridine (pybox), CO, and NaPF(6). Complex 1 reacts with monodentate phosphines to give the complexes [Rh(kappa(1)-N-pybox)(CO)(PR(3))(2)][PF(6)] (R(3) = MePh(2) (2), Me(2)Ph (3), (C(3)H(5))Ph(2) (4)), which show a previously unseen monodentate coordination of pybox. Complex 1 undergoes oxidative addition reactions with iodine and CH(3)I leading to the complexes [RhI(R)(kappa(3)-N,N,N-pybox)(CO)][PF(6)] (R = I (5); R = CH(3) (6)). Furthermore, a new allenyl Rh(III)-pybox complex of formula [Rh(CH=C=CH(2))Cl(2)(kappa(3)-N,N,N-pybox)] (7) has been synthesized by a one-pot reaction from [Rh(mu-Cl)(eta(2)-C(2)H(4))(2)](2), pybox, and an equimolar amount of propargyl chloride.