An efficient nonisocyanate route to polyurethanes via thiol‐ene self‐addition

A novel and efficient strategy for the synthesis of nonisocyanate polyurethanes has been developed via thiol–ene self‐photopolymerization. An aliphatic thiol–ene carbamate monomer (allyl(2‐mercaptoethyl)carbamate, AMC) was synthesized by a one‐step synthesis procedure, from cysteamine and allyl chloroformate. The urethane group was therefore incorporated directly into the monomer precursor, avoiding the problems associated to toxic isocyanates. AMC was successfully stabilized with the radical inhibitor pyrogallol (1% wt). In addition, the use of phenyl phosphonic acid as coadditive allowed its stabilization for lower concentrations of pyrogallol (0.1% wt). AMC was directly transformed into thermoplastic polyurethane (TPU) through thiol–ene photopolymerization by UV‐irradiation at 365 nm. The obtained TPU presented semi‐crystalline nature and very high thermal stability (T_5% ～325 °C). It was found that high concentrations of pyrogallol decreased the reaction rate and final conversion of photopolymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3017–3025     

Efficient photopolymerization of thick pigmented systems using upconversion nanoparticles‐assisted photochemistry

Photopolymerization of thick pigmented systems still remains challenging due to the light screening effect of the pigments. Here, we present a facile method based on upconversion nanoparticles (UCNPs)‐assisted photochemistry to achieve efficient photopolymerization and improved curing depth of pigmented systems. Under a 980‐nm laser irradiation, UCNPs are able to convert NIR light into UV and visible light to activate photoinitiators for the initiation of polymerization. Influencing factors on photopolymerization were systematically investigated. With optimal parameters, 25.5 mm of photopolymerization depth combined with 70% of maximal double bond conversion was obtained. The peak temperature of 120.4 °C during UCNPs‐assisted photopolymerization is comparable with or lower than that of some reported frontal photopolymerization applied to prepare functional composite polymeric materials. Both indentation hardness and reduced modulus of the photocured materials using UCNPs as internal lamps were higher than those of the reference cured under traditional blue LED light. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 994–1002     

Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light

Only one naphthalic anhydride derivative has been reported as light sensitive photoinitiator, this prompted us to further explore the possibility to prepare a new family of photoinitiators based on this scaffold. Therefore, eight naphthalic Naphthalic anhydride derivatives (ANH1‐ANH8) have been prepared and combined with an iodonium salt (and optionally N‐vinylcarbazole) or an amine (and optionally 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine) to initiate the cationic polymerization of epoxides and the free radical polymerization of acrylates under different irradiation sources, that is, very soft halogen lamp (～ 12 mW cm^?2), laser diode at 405 nm (～1.5 mW cm^?2) or blue LED centered at 455 nm (80 mW cm^?2). The ANH6 based photoinitiating systems are particularly efficient for the cationic and the radical photopolymerizations, and even better than that of the well‐known camphorquinone based systems. The photochemical mechanisms associated with the chemical structure/photopolymerization efficiency relationships are studied by steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2860–2866     

Tailored composite polymer–metal nanoparticles by miniemulsion polymerization and thiol‐ene functionalization

A simple and modular synthetic approach, based on miniemulsion polymerization, has been developed for the fabrication of composite polymer–metal nanoparticle materials. The procedure produces well‐defined composite structures consisting of gold, silver, or MnFe₂O₄ nanoparticles (～10 nm in diameter) encapsulated within larger spherical nanoparticles of poly(divinylbenzene) (～100 nm in diameter). This methodology readily permits the incorporation of multiple metal domains into a single polymeric particle, while still preserving the useful optical and magnetic properties of the metal nanoparticles. The morphology of the composite particles is retained upon increasing the inorganic content and also upon redispersion in organic solvents. Finally, the ability to tailor the surface chemistry of the composite nanoparticles and incorporate steric stabilizing groups using simple thiol‐ene chemistry is demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1594–1606, 2010     

The preparation of amphiphilic core‐shell nanospheres by using water‐soluble macrophotoinitiator

The amphiphilic poly(AM‐co‐SA)‐ITXH macrophotoinitiator was synthesized by precipitation photopolymerization under UV irradiation with isopropylthioxanthone (ITX) as free radical photoinitiator. A novel method has been developed to prepare amphiphilic core‐shell polymer nanospheres via photopolymerization of methyl methacrylate (MMA) in aqueous media, with amphiphilic copolymer macrophotoinitiator poly(AM‐co‐SA)‐ITXH. During polymerization, the amphiphilic macroradicals underwent in situ self‐assembly to form polymeric micelles, which promoted the emulsion polymerization of the monomer. Thus, amphiphilic core‐shell nanospheres ranging from 70 to 140 nm in diameter were produced in the absence of surfactant. The conversion of the monomer, number average molecular weights (M_n), and particle size were found to be highly dependent on the macrophotoinitiator and monomer concentration. The macrophotoinitiator and amphiphilic particles were characterized by FTIR, UV‐vis, ¹H NMR, TEM, DSC, and contact angle measurements. The results showed the particles had well‐defined amphiphilic core‐shell structure. This new method is scientifically and technologically significant because it provides a commercially viable route to a wide variety of novel amphiphilic core‐shell nanospheres. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 936–942, 2010     

Obtaining of hybrid nanocomposites by simultaneous photopolymerization of some urethane monomers and photoinduced formation of gold nanoparticles

Urethane–urea dimethacrylates were synthesized and used in the preparation of nanocomposites containing gold nanoparticles (Au NPs) in situ photogenerated during the UV‐curing process in the absence of reducing agent. A study of the photopolymerization kinetics showed that the photoreactivity of the monomers alone or in combination with a dual urethane benzophenone (BP) macromer is dependent on the nature of photoinitiator (Irgacure819, BP/amine) and the formulation composition. It was found that the addition of 1 wt % AuBr₃ in monomers slightly improved the polymerization rate and the degree of conversion. The formation of Au NPs into the network was confirmed through UV–vis, XRD, EDX, SAXS, and TEM analyses, the last indicating the existence of NPs with size around 8.5 nm and spherical/triangle shapes. On addition of 10 wt % 2[N‐methacryloyloxyethyl‐(N'‐2‐thioethyl)] (urea) in formulation, the Au NPs (200 nm) became predominantly cubic/hexagonal in shape. The composite films emit fluorescence at 575 nm, and this property could be exploited in the field of fluorescent bio/sensors. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 728–738     

Surface‐dependent effect of functional silica fillers on photocuring kinetics of hydrogel materials

Two types of silica: precipitated (P, prepared in non‐polar media, a new type, submicrometer sized) and fumed (F, nanosized), both unmodified and surface modified are investigated as functional fillers for potential applications in nanocomposites with poly(2‐hydroxyethyl methacrylate) matrix. Special attention is paid to the kinetics of composite formation in an in situ photopolymerization process. Silica‐containing formulations polymerize faster; this effect is much stronger for silica P having much larger particle size than silica F. Surface treatment leads to further acceleration of the polymerization in case of silica P but to retardation in case of silica F; the effect of modification of the filler surface on properties of composites is different for each of the silicas. The obtained results are discussed in terms of effects of curvature of silica particles, surface properties, solvation cell, interphase region, viscosity changes, and morphology of the resulting composites. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3472–3487     

Living radical photopolymerization induced grafting on thiol–ene based substrates

The formation of reactive substrates with iniferter‐mediated living radical photopolymerization is a powerful technique for surface modification, which can readily be used to facilitate the incorporation of a variety of surface functionalities. In this research, the photopolymerization kinetics of novel bulk thiol–ene systems have been compared with those of typical acrylate and methacrylate systems when polymerized in the presence of the photoiniferter p‐xylene bis(N,N‐diethyl dithiocarbamate) (XDT). In the presence of XDT, the thiol–ene systems photopolymerize more quickly than the traditional acrylate and methacrylate systems by one to two orders of magnitude. Fourier transform infrared spectroscopy has been used to monitor the photografting kinetics of various monomers on dithiocarbamate‐functionalized surfaces. Furthermore, this technique has been used to evaluate surface‐initiation kinetics and to emphasize the influence of bulk substrate properties on grafting kinetics. Finally, photopatterning has been demonstrated on a dithiocarbamate‐incorporated thiol–ene substrate with conventional photolithographic techniques. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2134–2144, 2005     

Efficient initiation of radical‐mediated thiol‐ene chemistry with photoactive silica particles

This work aims at the design of photoactive inorganic filler by covalently attaching tri(methoxy)silyl‐functionalized bis(acyl)phosphane oxides (TEMSI²‐BAPO) onto silica particles. The immobilization of the photoactive groups is evidenced by spectroscopic measurements and thermal gravimetric analysis. The modified particles are then incorporated into thiol–ene resins to study the efficiency of the Norrish type I photofragmentation reaction of the covalently bound TEMSI²‐BAPO derivatives. The photopolymerization kinetics of the thiol–ene system is monitored by FT‐IR spectroscopy and photo‐DSC upon prolonged exposure with UV‐light and compared with the results achieved with IRGACURE 819 (free BAPO). Rapid curing and high conversion yields are obtained evidencing the high efficiency of the photoactive particles. In addition, negative‐toned patterns are inscribed in thin thiol–ene films by photolithographic processes and characterized by microscopic techniques demonstrating the versatile applicability of the photoactive particles. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 894–902     

Blue LED light‐sensitive benzo pyrazolo (or imidazo) isoquinolinone derivatives in high‐performance photoinitiating systems for polymerization reactions

Isoquinolinone derivatives (IQ) have been synthesized and combined with different additives (an amine, 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine, an iodonium salt, or N‐vinylcarbazole) to produce reactive species (i.e. radicals and cations) being able to initiate the radical polymerization of acrylates, the cationic polymerization of epoxides, the thiol‐ene polymerization of trifunctional thiol/divinylether, and the synthesis of epoxide/acrylate interpenetrated polymer network IPN upon exposure to very soft polychromatic visible lights, blue laser diode or blue LED lights. Compared with the use of camphorquinone based systems, the novel combinations employed here ensures higher monomer conversions (～50–60% vs. ～15–35%) and better polymerization rates in radical polymerization. The chemical mechanisms are studied by steady‐state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin trapping techniques. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 567–575     

UV‐curable thio‐ether‐urethane network with tunable properties

A photoinitiating system composed of a sensitizer (isopropylthioxanthone, ITX) and a photobase generator (triazabicyclodecene tetraphenylborate TBD.HBPh4) was successfully applied to the photopolymerization of a thiol‐isocyanate‐epoxy mixture. The final polymer network was considered in term of the compositional ratio between the thiol‐isocyanate and thiol‐epoxy coupling reactions. In parallel with structural investigation by spectroscopic technics, the relationships between the compositional ratio and kinetics of photopolymerization, thermomechanical properties and hardness were investigated. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3119–3126     

Investigations of the reactivity of “kick‐started” oxetanes in photoinitiated cationic polymerization

The ability of certain alkyl substituted epoxides to accelerate the photoinitiated cationic ring‐opening polymerizations of oxetane monomers by substantially reducing or eliminating the induction period altogether has been termed by us “kick‐starting.” In this communication, the rates of photopolymerization of several model “kick‐started” oxetane systems were quantified and compared with the analogous biscycloaliphatic epoxide monomer, 3,4‐epoxycyclohexylmethyl 3′,4′‐epoxycyclohexanecarboxylate (ERL). It has been found that the “kick‐started” systems undergo photopolymerization at rates that are at least two‐fold faster than ERL. These results suggest that “kick‐started” oxetanes could replace ERL in many applications in which high speed ultraviolet induced crosslinking photopolymerizations are carried out. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 586–593     

Step‐growth thiol–thiol photopolymerization as radiation curing technology

This report introduces a novel UV‐curing technology based on thiol–thiol coupling for polydisulfide network formation. Beginning with a model tris(3‐mercaptopropionate) trithiol monomer and xanthone propionic acid‐protected guanidine as photobase generator, a comprehensive characterization based on spectroscopic techniques supports the reaction of thiols into disulfides without side reactions. The best experimental conditions are described as regards to film thickness, irradiance, emission wavelength, and atmosphere composition. The results shed light on a step‐growth photopolymerization mechanism involving two steps: first, the formation of thiyl radicals by thiolate air oxidation or/and thiol photolysis, and second, their recombination into disulfide. By varying thiol functionality and structure, oligomer chain length and monomer/oligomer ratio, the network architecture can be finely tuned. The molecular mobility of the polydisulfide network is crucial to high thiol conversion rates and yields as revealed by ¹H T₂ NMR relaxation measurements. Ultimately, spatial control enables the formation of a photopatterned poly(disulfide) film, used as next‐generation high refractive index photoresist. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 117–128.     

A novel and facile preparation method of hollow silica spheres containing small SiO2 cores

This article presents a novel and facile preparation method of hollow silica spheres with loading small silica inside. In this approach, positively charged SiO₂/polystyrene core‐shell composite particles were synthesized first, when the silica shells from the sol‐gel process of tetraethoxysilane were then coated on the surfaces of composite particles via electrostatic interaction, the polystyrene was dissolved subsequently even synchronously in the same medium to form hollow silica spheres with small silica cores. TEM, SEM, and FTIR measurements were used to characterize these composite spheres. Based on this study, some inorganic or organic compounds could be loaded into these hollow silica spheres. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3431–3439, 2007     

Novel panchromatic photopolymerizable matrices: N,N'‐dibutylquinacridone as an efficient and versatile photoinitiator

N,N'‐dibutylquinacridone (DBQA) is utilized here for the first time as a high‐performance panchromatic photoinitiator for the cationic polymerization (CP) of epoxides, the free radical polymerization (FRP) of acrylates, the thiol‐ene polymerization and the synthesis of interpenetrated polymer networks (epoxide/acrylate) under violet, blue, green and yellow lights (emitted from LED at 405 nm, 470 nm, 520 nm, or 594 nm, or laser diode at 532 nm). It confers a panchromatic character to the photopolymerizable matrices. Remarkably, the proposed DBQA based photoinitiating systems exhibit quite excellent efficiency (the final monomer conversion for multifunctional monomers at room temperature can reach 62% and 50% in CP and FRP, respectively) and appear as much more powerful than the camphorquinone or Eosin‐Y containing reference systems for visible light. For green light, DBQA is much more reactive than the literature reference (Eosin‐Y) and for blue light, a good reactivity is found compared with camphorquinone. The photochemical mechanisms are studied by molecular orbital calculations, steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1719–1727     

Photocuring kinetics of UV‐initiated free‐radical photopolymerizations with and without silica nanoparticles

We used photodifferential scanning calorimetry to investigate the photocuring kinetics of UV‐initiated free‐radical photopolymerizations of acrylate systems with and without silica nanoparticles. Two kinetics parameters—the rate constant (k) and the order of the initiation reaction (m)—were determined for hybrid organic–inorganic nanocomposite systems containing different amounts of added silica nanoparticles (0–20 wt %) and at different isothermal temperatures (30–100 °C) using an autocatalytic kinetics model. The kinetic analysis revealed that the silica nanoparticles apparently accelerate the cure reaction and cure rate of the UV‐curable acrylate system, most probably due to the synergistic effect of silica nanoparticles during the photopolymerization process. However, a slight decrease in polymerization reactivity that occurred when the silica content increased beyond 15 wt % was attributed to aggregation between silica nanoparticles. We also observed that the addition of silica nanoparticles lowered the activation energy for the UV‐curable acrylate system, and that the collision factor for the system with silica nanoparticles was higher than that obtained for the system without silica nanoparticles, indicating that the reactivity of the former was greater than that of the latter. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 658–670, 2005     

Ultrathin gradient films using thiol‐ene polymerizations

The application of surface‐attached, thiol‐ene polymer films for controlling material properties in a gradient fashion across a surface was investigated. Thiol‐ene films were attached to the surface by first depositing a thiol‐terminated self‐assembled monolayer and performing a thiol‐ene photopolymerization reaction on the surface. Property gradients were created either by creating and modifying a gradient in the surface thiol density in the SAM or by changing the polymerization conditions or both. Film thickness was modified across the substrate by changing either the density of the anchoring thiol functional groups or by changing the reaction conditions such as exposure time. Thicker films (1–11 nm) were obtained by polymerizing acrylate polymer brushes from the surface with varying exposure time (0–60 s). The two factors, that is, the surface thiol density and the exposure time, were combined in orthogonal directions to obtain thiol‐ene films with a two‐dimensional thickness gradient with the maximum thickness being 4 nm. Finally, a thiol‐acrylate Michael type addition reaction was used to modify the surface thiol density gradient with the cell‐adhesive ligand, Arg‐Gly‐Asp‐Ser (RGDS), which subsequently yielded a gradient in osteoblast density on the surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7027–7039, 2006     

High‐throughput kinetic analysis of acrylate and thiol‐ene photopolymerization using temperature and exposure time gradients

In this work, a high‐throughput technique for evaluating photopolymers is developed to enable simultaneous measurement of the effects of temperature in combination with exposure time. Temperature and exposure time gradients were produced in orthogonal directions on a single sample, and subsequently sampled using Fourier transform infrared (FTIR) spectroscopy. The technique developed here allows for photopolymerization kinetics to be analyzed rapidly over a large range of industrially relevant temperatures, giving insight into the role temperature and the polymer's glass transition temperature have in dictating the photopolymerization kinetics. In the 70/30 wt % hexyl acrylate and hexanediol diacrylate system, conversion in samples below the glass transition temperature (T_G) was 66 ± 2% after 12 s, significantly lower than the 93 ± 4% conversion at 12 s for samples polymerized at temperatures above the T_G. In addition, a thiol‐ene system was analyzed to study the effect of temperature on the ene homopolymerization in allyl ether monomers, which leads to incomplete thiol conversion in stoichiometrically balanced systems. At a 60% thiol conversion, the allyl ether‐ene conversion at all temperatures is 65 ± 3% irrespective of initial formulation temperature, indicative of the homopolymerization behavior being nearly independent of temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1502–1509, 2008     

Thiol‐ene photopolymerization of polymer‐derived ceramic precursors

The liquid, ceramic precursor monomer VL20 was copolymerized with a thiol monomer in a traditional radical thiol‐ene photopolymerization. Polymerization occurred via addition of the thiol functional group to the vinyl silazane functional group in a 1:1 ratio consistent with a step‐growth polymerization. Gelation occurred at a high conversion of functional groups (70%) consistent with an average molecular weight and functionality of 560 and 1.7, respectively, for VL20 monomers. Initiatorless photopolymerization of the thiol‐VL20 system also occurred upon irradiation at either 365 or 254 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1752–1757, 2004     

Thiol‐isocyanate‐acrylate ternary networks by selective thiol‐click chemistry

Thiol‐isocyanate‐acrylate ternary networks were formed by the combination of thiol‐isocyanate coupling, thiol‐acrylate Michael addition, and acrylate homopolymerization. This hybrid polymerization reaction sequence was preferentially controlled by using phosphine catalyst systems in combination with photolysis. The reaction kinetics of the phosphine/acrylate thiol‐isocyanate coupling reactions were systematically investigated by evaluating model, small molecule reactions. The thiol‐isocyanate reaction was completed within 1 min while the thiol‐acrylate Michael addition reaction required ～10 min. Both thiol‐isocyanate coupling and thiol‐acrylate Michael addition reactions involving two‐step anionic processes were found to be both quantitative and efficient. However, the thiol‐isocyanate coupling reaction was much more rapid than the thiol‐acrylate Michael addition, promoting initial selectivity of the thiol‐isocyanate reaction in a medium containing thiol, isocyanate, and acrylate functional groups. Films were prepared from thiol‐isocyanate‐acrylate ternary mixtures using 2‐acryloyloxyethylisocyanate and di‐, tri‐, and tetra‐functional thiols. The sequential thiol‐isocyanate, thiol‐acrylate, and acrylate homopolymerization reactions were monitored by infrared spectroscopy during film formation, whereas thermal and mechanical properties of the films were evaluated as a function of the chemical composition following polymerization. The results indicate that the network structures and material properties are tunable over a wide range of properties (T_g ～ 14–100 °C, FWHM ～ 8–46 °C), while maintaining nearly quantitative reactions, simply by controlling the component compositions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3255–3264, 2010