Solvatochromic properties of long alkyl chain π* indicators: comparison of N,N‐dialkyl‐4‐nitroanilines and alkyl 4‐nitrophenyl ethers

Hydrophobic forms of the N,N‐dialkyl‐4‐nitroaniline (DNAP) (p‐O₂NC₆H₄NR₂) ( 1a–f ) and alkyl‐4‐nitrophenyl ether (p‐O₂NC₆H₄OR) ( 2a–c ) solvatochromic π* indicators have been characterized and compared with respect to: (a) solvatochromic bandshape, (b) sensitivity expressed as ?s , ( / d π * ), and (c) trends in ? s with increasing length of alkyl chain(s) on the probe molecule. ? Octyl 4‐nitrophenyl ether (p‐O₂NC₆H₄OC₈H₁₇) ( 2b ) and ? decyl 4‐nitrophenyl ether (p‐O₂N C₆H₄ OC₁₀H₂₁) ( 2c ) were synthesized and their solvatochromic UV/Vis absorption bands were found to maintain a Gausso‐Lorentzian bandshape for the indicators in non‐polar and alkyl substituted aromatic solvents, for example, hexane(s) and mesitylene. Corresponding absorption bands for 1a–f display increasing deviation from a Gausso‐Lorentzian shape in the same solvents as the alkyl chains on the indicator are increased in length all the way to C₁₀ and C₁₂, for example, N,N‐didecyl‐4‐nitroaniline (p‐O₂NC₆H₄N (C₁₀H₂₁)₂) and N,N‐didodecyl‐4‐nitroaniline (p‐O₂NC₆H₄N (C₁₂H₂₅)₂) ( 1d–f ). A plot of ? s versus C_n follows a 1st order decay for the DNAP indicators but is linear for the alkyl 4‐nitrophenyl ethers. A discussion of how the long alkyl chains on the two types of indicators affect the orientation and overlap of n and π * orbitals, and resulting solvatochromic bands is presented. For DNAP, overextending the alkyl chains to obtain greater hydrophobic character may cause the alkane component to dominate solute‐solvation processes at the expense of the probe's fundamental solvatochromic character. Copyright © 2007 John Wiley & Sons, Ltd.     

Enols of 2‐nitro‐ and related 2‐substituted malonamides

The structures of 2‐substituted malonamides, YCH(CONR¹R²)CONR³R⁴ (Y = Br, SO₂Me, CONH₂, COMe, and NO₂) were investigated. When Y = Br, R¹R² = R³R⁴ = HEt; Y = SO₂Me, R¹–R⁴ = H and for Y = CONH₂ or CONHPh, R¹–R⁴ = Me, the structure in solution is that of the amide tautomer. X‐ray crystallography shows solid‐state amide structures for Y = SO₂Me or CONH₂, R¹–R⁴ = H. Nitromalonamide displays an enol structure in the solid state with a strong hydrogen bond (O^…O distance = 2.3730 Å at 100 K) and d(OH) ≠ d(O^…H). An apparently symmetric enol was observed in solution, even in appreciable percentages in highly polar solvents such as DMSO‐d₆, but K_enol values decrease on increasing the solvent polarity. The N,N′‐dimethyl derivative is less enolic. Acetylmalonamides display a mixture of enol on the acetyl group and amide in non‐polar solvents, and only the amide in DMSO‐d₆. DFT calculations gave the following order of pK_enol values for Y: H > CONH₂ > COMe ≥ COMe (on acetyl) ≥ MeSO₂ > CN > NO₂ in the gas phase, CHCl₃, and DMSO. The enol on the C?O group is preferred to the aci‐nitro compound, and the N? O? H^…O?C is less favored than the C?O? H^…O?C hydrogen bond. Copyright © 2009 John Wiley & Sons, Ltd.     

Variation of the temperature‐dependent substituent effects with solvent in alkaline hydrolysis of substituted phenyl and alkyl benzoates and phenyl tosylates

The second‐order rate constants k for the alkaline hydrolysis of eight substituted alkyl benzoates have been measured spectrophotometrically in aqueous 5.3 M NaClO₄ and 0.5 M n‐Bu₄NBr at various temperatures. Variation of the substituent effect with temperature in alkaline hydrolysis of ortho‐, meta‐, and para‐substituted phenyl benzoates, phenyl tosylates, and alkyl benzoates in various solvents (water, aqueous 0.5 M Bu₄NBr, 80% (v/v) DMSO, 2.25 M Bu₄NBr, and 5.3 M NaClO₄) was studied. The susceptibility to temperature variation of the meta and para polar substituent effect, the ortho inductive effect, and the alkyl polar effect for various media showed good correlation with the solvent electrophilicity, E_S, which characterizes the hydrogen‐bond donating power of the solvent. The variation of the temperature‐dependent ortho inductive effect with solvent hydrogen‐bond donor capacity (electrophilicity) was found to be nearly twice smaller than that for meta and para polar effect. The temperature‐dependent alkyl polar substituent effect was found to vary with E_S nearly by the same extent as the polar effect of meta and para substituents. The dependences of the ρ values (altogether 109 values of ρ) on the (1/T) term for various media were found to cross nearly at the same isosolvent temperature (1/β_isosolv ≈ 2 × 10^?3) for meta‐, para‐, ortho‐, and alkyl‐substituted esters. At T = β_isosolv the difference (ρ)_S ? (ρ)_Water becomes zero for all polar substituent effects in all media considered and the additional inductive effect from the ortho position (compared with para derivatives) disappears for all solvents studied. Copyright © 2007 John Wiley & Sons, Ltd.     

Substituent effects on the pH‐dependent multiequilibria of flavylium salt analogs of anthocyanins

Substituent effects on the hydration, tautomerization, and isomerization equilibria of flavylium salts can be described by a series of linear free energy relationships (LSER) based on Hammett correlations. The positions on the flavylium rings were classified as either activated (para‐like) or nonactivated (meta‐like) to decide which σ value to employ (σ_R or σ_m, respectively), while the steric effects of substituents at C‐3 were included via the E_S parameter. Based on these relationships, we then show that it is possible to predict values of the “apparent pK_a” (pK_ap) of flavylium ions that were not included in the original data set, as well as those of several naturally occurring anthocyanins. The value of pK_ap provides a measure of the thermodynamic stability of the flavylium cation as a function of pH and is directly related to the pH range in which the color of the flavylium cation form of anthocyanins persists in aqueous solution. Copyright © 2011 John Wiley & Sons, Ltd.     

Ionic solvation and association in LiCl aqueous solution: a density functional theory,polarised continuum model and molecular dynamics investigation

In this work, the ionic solvation and association behaviours in the LiCl aqueous solution were investigated using density functional theory (DFT), a polarised continuum model and classical molecular dynamics simulations. DFT calculations of LiCl(H₂O)_1–6,8 clusters show that contact ion pair (CIP) and solvent-shared ion pair (SSIP) conformers of LiCl(H₂O)_n (n ≥ 4) clusters are generally energetic both in the gas phase and in the aqueous solution. Some SSIP conformers may be slightly more stable than their CIP isomers when at least eight water molecules are incorporated in the inner hydration shells of LiCl hydrates. The transformation between CIP and SSIP conformers is easy by overcoming a small energy barrier, which mainly results from the hydration shell reorganisation of Li⁺. Molecular dynamics simulations show that ion pairs or ion clusters can be found in the LiCl aqueous solution, and the probability of CIP conformers or ion clusters presented in the LiCl solution generally increases with rise in temperature. However, the presentation of ion pairs or ion clusters in the LiCl aqueous solution does not inevitably lead to the nucleation of LiCl crystallisation.     

NMR,IR, and ESR spectroscopic investigation of reaction of α‐silylamines with carbon tetrachloride

This paper reports about high reactivity of α‐silylamines in the reaction with CCl₄. Unlike Et₃N, α‐silylamines rapidly react with CCl₄ upon irradiation with daylight to form α‐silylamine hydrochloride salts in 92–98% yields. The influence of structure of α‐silylamines and solvent on the degree of conversion was displayed. The interaction of α‐silylamines with CCl₄ was studied by NMR, ESR, and IR spectroscopy. C‐centered radicals of α‐silylamines were detected by ESR spectroscopy with spin traps (MNP, ND, and PBN) in reaction mixtures in CH₃CN and C₆H₆ and it show the radical character of this reaction. Both CH₃CN and C₆H₆ serve as solvents as well as reagents for this reaction. A mechanism of an interaction between α‐silylamines and CCl₄ is discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Self‐association,tautomerism and E–Z isomerization of isatin–phenylsemicarbazones – spectral study and theoretical calculations

The self‐association and tautomerism of (E)‐isatin‐3‐4‐phenyl(semicarbazone) Ia and (E)‐N‐methylisatin‐3‐4‐phenyl(semicarbazone) IIa were investigated in solvents of various polarity. In weakly interacting non‐polar solvents, such as CHCl₃ and benzene, phenylsemicarbazone concentrations above 1×10^?5 mol dm^?3 result in the formation of dimers or higher aggregates of E‐isomers Ia and IIa . This aggregate formation prevents room temperature E–Z isomerization of Ia and IIa to more stable Z‐isomers. In contrast to the situation in non‐polar solvents, E–Z isomerization from the monomeric form of phenylsemicarbazone Ia and IIa E‐isomers occurs in highly interactive polar solvents including MeOH and DMF only at temperatures above 70 °C. Moreover, decrease in phenylsemicarbazone concentration below 1×10^?4 mol dm^?3 in these highly solute–solvent interacting systems leads to aggregate dissociation, and a new hydrazonol tautomeric form with a high degree of conjugation predominates in these solutions. Theoretical calculations confirm obtained experimental results. Copyright © 2013 John Wiley & Sons, Ltd.     

Intramolecular Diels–Alder reaction in enyne–allenes: a computational investigation and comparison with the Myers–Saito and Schmittel reactions

The reaction mechanisms as well as substituted effect and solvent effect of the enyne–allenes are investigated by Density Functional Theory (DFT) method and compared with the Myers–Saito and Schmittel reactions. The Myers–Saito reaction of non‐substituted enyne–allenes is kinetically and thermodynamically favored as compared to the Schmittel reaction; while the concerted [4 + 2] cycloaddition is only 1.32 kcal/mol higher than the C₂? C₇ cyclization and more exothermic (Δ_RE = ?69.38 kcal/mol). For R₁ = CH₃ and t‐Bu, the increasing barrier of the C₂? C₇ cyclization is higher than that for the C₂? C₆ cyclization because of the steric effect, so the increased barrier of the [4 + 2] cycloaddition is affected by such substituted electron‐releasing group. Moreover, the strong steric effect of R₁ = t‐Bu would shift the C₂? C₇ cyclization to the [4 + 2] cycloaddition. On the other hand, for R₁ = Ph, NH₂, O^?, NO₂, and CN substituents, the barrier of the C₂? C₆ cyclization would be more diminished than the C₂? C₇ cyclization due to strong mesomeric effect; the reaction path of C₂? C₇ cyclization would also shift to the [4 + 2] cycloaddition. The solvation does not lead to significant changes in the potential‐energy surface of the reaction except for the more polar surrounding solvent such as dimethyl sulfoxide (DMSO), or water. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and electrochemical study of nitrophenyl derivatives of β‐cyclodextrin

A series of nitrophenyl β‐cyclodextrin derivatives: mono[6‐deoxy‐6‐(4‐nitrobenzamido)]‐per‐ O‐methyl‐β‐cyclodextrin (R₁? Ph? NO₂), mono[6‐deoxy‐6‐(3‐nitrobenzamido)]‐per‐O‐methyl‐β‐cyclodextrin (R₂? Ph? NO₂) and heptakis[6‐deoxy‐6‐(4‐nitrobenzamido)‐2,3‐di‐O‐methyl]‐β‐cyclodextrin [R₃? (Ph? NO₂)₇] were synthesized. Purity and composition of the obtained substances were checked. Electroreduction of nitro groups of the new synthesized compounds was investigated on mercury electrode using cyclic voltammetry and chronocoulometry. The parameters of the reduction processes of ? NO₂ groups of the investigated compounds were found not to be comparable to the reduction of nitrobenzene under the same experimental conditions. Moreover, the electroreduction of nitro groups in these nitrophenyl derivatives was dependent on pH, the type of the studied compound, and slightly on the solvent composition. All the reactants were strongly adsorbed on mercury electrode. In the case of R₃? (Ph? NO₂)₇, its seven nitro groups were reduced practically at the same potential, and no radical anion formation was observed. Copyright © 2007 John Wiley & Sons, Ltd.     

Substituent effects on acidity of aryl‐substituted fluoroalkanes: a computational study

The gas‐phase acidities (GA) of various aryl‐substituted fluoroalkanes, XC₆H₄CH(R¹)R², were calculated at the B3LYP/6‐311 + G(d,p)//B3LYP/6‐311 + G(d,p). The acidity values of alkanes having a common substituent X varied significantly with the change of R¹ and R². Their changes in acidity of 1 and 2 having two strong electron‐withdrawing groups (CF₃ or C₂F₅) at the deprotonation site and 8 , 9 , 10 , 11 having no fluorine atom at β‐position were linearly correlated with the corrected number of fluorine atoms contained in the fluorinated alkyl group (R² > 0.999). On the other hand, the GA values of β‐fluorine substituted alkanes ( 3 , 4 , 5 , 6 , 7 ) deviated in a stronger acid direction from the line. The enhanced acidity was attributed to the additional stabilization of the conjugate anion caused by the β‐fluorine negative hyperconjugation. The magnitude of β‐fluorine negative hyperconjugation of the fluorinated alkyl group (ΔG^o_β‐F) given by the deviations from the line decreased with increasing electron‐withdrawing ability of substituent X on the benzene ring, indicating that β‐fluorine negative hyperconjugation competes with the electronic effect of the substituent X. The GA_el values obtained by subtraction ΔG^o_β‐F from the apparent GA value were successfully correlated in terms of the Yukawa–Tsuno equation. The obtained ρ_el and r^?_el values were linearly related to the GA_el value of the respective phenyl‐substituted fluoroalkanes, supporting our previous conclusion that the ρ and r^? values for the substituent effect caused by the electronic effects of the substituent on the acidity are determined by the thermodynamic stability of the parent ion (ring substituent = H). Copyright © 2015 John Wiley & Sons, Ltd.     

Rate and product studies with 2‐adamantyl fluoroformate under solvolytic conditions

The specific rates of solvolysis of 2‐adamantyl fluoroformate have been measured at 25.0 °C in 20 pure and binary solvents. These are well correlated using the extended Grunwald–Winstein equation, with incorporation of the N_T solvent nucleophilicity scale and the Y_Cl solvent ionizing power scale. The sensitivities (l = 2.15 ± 0.17 and m = 0.95 ± 0.07) toward the changes in solvent nucleophilicity and solvent ionizing power, and the k_F/k_Cl values are very similar to those previously observed for solvolyses of n‐octyl fluoroformate, consistent with the addition step of an addition‐elimination pathway being rate‐determining. For aqueous ethanol, measurement of the product ratio allowed selectivity values (S) to be determined. The results are compared with those reported earlier for 2‐adamantyl chloroformate and mechanistic conclusions are drawn. Copyright © 2007 John Wiley & Sons, Ltd.     

Reactivity of mixed organozinc and mixed organocopper reagents. Part 4: a kinetic study of group transfer selectivity in C?C coupling of mixed diorganocuprates

The competitive rate data and Taft relationships for the coupling of bromomagnesium n‐butyl (substituted phenyl) cuprates with alkyl bromides show that selective n‐butyl transfer can be explained by an oxidative addition mechanism. Taft reaction constants also show that the residual group FG‐C₆H₄ in the mixed cuprate n‐Bu(FG‐C₆H₄)CuMgBr changes the ability of the copper nucleophile to react with the electrophile RBr. These results provide support for the commonly accepted hypothesis regarding the dependence of the R¹ group transfer ability on the strength of R²? Cu bond in reactions of R¹R²CuMgBr reagents. Copyright © 2009 John Wiley & Sons, Ltd.     

Solvatochromism as an efficient tool to study N,N‐dimethylamino‐ and cyano‐substituted π‐conjugated molecules with an intramolecular charge‐transfer absorption

A representative data set has been gained by the measurement of the electronic absorption spectra of 12 systematically selected push–pull systems with an intramolecular charge‐transfer (CT) absorption and the general structure D–π–A (D = donor, A = acceptor) featuring electron‐withdrawing CN groups, electron‐donating N(CH₃)₂ groups, and various π‐conjugated backbones in 32 solvents with different polarities. The longest‐wavelength absorption maxima λ_max and the corresponding wavenumbers $\tilde {v}_{{\rm max}} $ were evaluated from the UV/Vis spectra measured in 32 well‐selected solvents. The D–π–A push–pull systems were further characterized by quantum‐chemical quantities and simple structural parameters. Structure–solvatochromism relationships were evaluated by multidimensional statistic methods. Whereas solvent polarizability and solvent cavity size proved to be the most important factors affecting the position of λ_max, the solvent polarity was less important. The most important characteristics of organic CT compounds are the energy of the LUMO, the permanent dipole moment, the COSMO (COnductor‐like Screening MOdel) area, the COSMO volume, the number, and ratio of N,N‐dimethylamino and cyano groups, and eventually the number of triple bonds (π‐linkers). A relation between the first‐order polarizability α, the longest‐wavelength absorption maxima λ_max, and the structural features has also been found. The higher‐order polarizabilities β and γ are not related to the observed solvatochromism. Copyright © 2010 John Wiley & Sons, Ltd.     

Mechanism for enhancing dispersion of Co3O4 nanoparticles in Co/SiO2 Fischer–Tropsch synthesis catalyst by adding glycol to impregnating solution: a quick‐XAFS study

In situ Co K‐edge quick‐EXAFS (QEXAFS) coupled with temperature‐programmed oxidation as well as ex situ XAFS was applied to investigating the mechanism for enhancing the dispersion of Co₃O₄ nanoparticles in a calcined Co/SiO₂ Fischer–Tropsch synthesis catalyst prepared by adding triethylene glycol (TEG) to a Co(NO₃)₂.6H₂O impregnating solution. Ex situ Co K‐edge XAFS indicated that, regardless of whether the catalysts were prepared with or without using TEG, the hexaaqua Co (II) complex was formed in impregnated samples which then underwent the dehydration process to some extent during the subsequent drying step at 393 K. In situ QEXAFS and ex situ EXAFS results also indicated that small oxide clusters were formed in the TEG‐modified catalyst calcined at ～400–470 K which interacted with polymer species derived from TEG. Since the Fischer–Tropsch synthesis activity of the TEG‐modified catalyst increased with an increase in the calcination temperature in a similar temperature range [Koizumi et al. (2011), Appl. Catal. A, 395 , 138–145], it was suggested that such an interaction enables the clusters to be distributed over the support surface uniformly, resulting in enhancing their dispersion. After combustion of polymer species, Co₃O₄‐like species were formed, and agglomeration of the Co₃O₄‐like species at high calcination temperatures was suppressed by the addition of TEG to the impregnating solution. It was speculated that the addition of TEG induced the formation of some surface silicate which worked as an anchoring site for Co₃O₄ and Co⁰ nanoparticles during calcination and H₂ reduction, respectively.     

Solvolytic reactivity of pyridinium ions

The leaving group abilities of pyridine, 4‐methylpyridine, and 4‐chloropyridine in S_N1 solvolytic reactions have been determined by analyzing the rate constants of X,Y‐substituted benzhydrylpyridinium salts obtained in various solvents. By applying the linear free energy relationship equation, log k = s_f (E_f + N_f), the nucleofuge specific parameters of 4‐substituted pyridine have been extracted. Because of solvation in the reactant ground state, the reactivity (nucleofugality, N_f) of a given pyridine decreases as the polarity of the solvent increases. High slope parameters (s_f > 1) may be due to the spread of the energy levels of the benzhydrylium ion/pyridine pair intermediates in comparison to benzhydrylium ion/chloride pairs (s_f ≈ 1). Because of slow heterolysis step of pyridinium salts in various solvents, some are stable under normal conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Structure–reactivity relationship for alcohol oxidations via hydride transfer to a carbocationic oxidizing agent

Second‐order rate constants were determined for the oxidation of 27 alcohols (R¹R²CHOH) by a carbocationic oxidizing agent, 9‐phenylxanthylium ion, in acetontrile at 60 °C. Alcohols include open‐chain alkyl, cycloalkyl, and unsaturated alcohols. Kinetic isotope effects for the reaction of 1‐phenylethanol were determined at three H/D positions of the alcohol (KIE_α‐D = 3.9, KIE_β‐D3 = 1.03, KIE_OD = 1.10). These KIE results are consistent with those we previously reported for the 2‐propanol reaction, suggesting that these reactions follow a hydride‐proton sequential transfer mechanism that involves a rate‐limiting formation of the α‐hydroxy carbocation intermediate. Structure–reactivity relationship for alcohol oxidations was deeply discussed on the basis of the observed structural effects on the formation of the carbocationic transition state (C^δ+? OH). Efficiencies of alcohol oxidations are largely dependent upon the alcohol structures. Steric hindrance effect and ring strain relief effect win over the electronic effect in determining the rates of the oxidations of open‐chain alkyl and cycloalkyl alcohols. Unhindered secondary alkyl alcohols would be selectively oxidized in the presence of primary and hindered secondary alkyl alcohols. Strained C₇? C₁₁ cycloalkyl alcohols react faster than cyclohexyl alcohol, whereas the strained C₅ and C₁₂ alcohols react slower. Aromatic alcohols would be efficiently and selectively oxidized in the presence of aliphatic alcohols of comparable steric requirements. This structure–reactivity relationship for alcohol oxidations via hydride‐transfer mechanism is hoped to provide a useful guidance for the selective oxidation of certain alcohol functional groups in organic synthesis. Copyright © 2011 John Wiley & Sons, Ltd.     

Correlation of the rates of solvolysis of diphenylphosphinyl chloride using an extended form of the Grunwald–Winstein equation

The specific rates of solvolysis of diphenylphosphinyl chloride ( 1 ) have been measured at 25.0 °C in 30 solvents. For six representative solvents, studies were made at several temperatures and activation parameters determined. These were used to calculate a value at 25.0 °C in 100% 2,2,2‐trifluoroethanol (TFE) from values at higher temperatures. The 31 solvents gave a reasonable extended Grunwald–Winstein plot, correlation coefficient (R) of 0.920, which improved to 0.956 when the four TFE–ethanol points were excluded. The sensitivities (l and m) were similar to those obtained for dimethyl phosphorochloridate and phosphorochloridothionate and for N,N,N′,N′‐ tetramethyldiamidophosphorochloridate. As with the three previously studied solvolyses, an S_N2 pathway is proposed for the solvolyses of 1 . Copyright © 2007 John Wiley & Sons, Ltd.     

Solid polymeric electrolyte of PVC–ENR–LiClO<Subscript>4</Subscript>

The ionic conductivity of PVC–ENR–LiClO₄ (PVC, polyvinyl chloride; ENR, epoxidized natural rubber) as a function of LiClO₄ concentration, ENR concentration, temperature, and radiation dose of electron beam cross-linking has been studied. The electrolyte samples were prepared by solution casting technique. Their ionic conductivities were measured using the impedance spectroscopy technique. It was observed that the relationship between the concentration of salt, as well as temperature, and conductivity were linear. The electrolyte conductivity increases with ENR concentration. This relationship was discussed using the number of charge carrier theory. The conductivity–temperature behaviour of the electrolyte is Arrhenian. The conductivity also varies with the radiation dose of the electron beam cross-linking. The highest room temperature conductivity of the electrolyte of 8.5 × 10⁻⁷ S/cm was obtained at 30% by weight of LiClO₄. The activation energy, E _a and pre-exponential factor, σ _o, are 1.4 × 10⁻² eV and 1.5 × 10⁻¹¹ S/cm, respectively.     

Rate and product studies in the solvolyses of methanesulfonic anhydride and a comparison with methanesulfonyl chloride solvolyses

The specific rates of solvolysis of methanesulfonic anhydride have been measured conductometrically at ?10 °C in 41 solvents. Use of the extended Grunwald–Winstein equation, with the N_T scale of solvent nucleophilicity and the Y_OTs scale of solvent ionizing power, leads to sensitivity to changes in solvent nucleophilicity (? value) of 0.95 and a sensitivity to changes in solvent ionizing power (m value) of 0.61, with a multiple correlation coefficient (R) of 0.973. Product selectivity values (S) in binary hydroxylic solvents favor alcohol attack in EtOH–H₂O (a value of 1.2 in 90% EtOH rising to 4.0 in 40% EtOH) and in MeOH–H₂O (a value of 3.7 in 90% MeOH rising to 6.0 in 50% MeOH). In 2,2,2,‐trifluoroethanol–H₂O, the S values are much lower at about 0.1. Entropy of activation values are appreciably negative. Literature values for the specific rates of solvolysis of methanesulfonyl chloride have been extended to fluoroalcohol‐containing solvents (titrimetric method) and, at 45.0 °C, for an overall 43 solvents values are obtained (using N_T and Y_C1 scales) of 1.20 for ? and of 0.52 for m (R = 0.969). It is proposed that both substrates solvolyze by an S_N2 pathway. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of ortho substituents on carbonyl carbon 13C NMR chemical shifts in substituted phenyl benzoates

¹³C NMR spectra of 37 ortho‐, meta‐, and para‐substituted phenyl benzoates, containing substituents in benzoyl and phenyl moiety, 4 ortho‐substituted methyl and 5 ethyl benzoates as well as 9 R‐substituted alkyl benzoates have been recorded. The influence of the ortho substituents on the carbonyl carbon ¹³C NMR chemical shift, δ_CO, was found to be described by a linear multiple regression equation containing the inductive, σ_I, resonance, σ°_R, and steric, E, or υ substituent constants. For all the ortho‐substituted esters containing substituents in the acyl part as well as the phenyl part, the substituent‐induced reverse inductive effect (ρ_I < 0), the normal resonance effect (ρ_R > 0), and the negative steric effect (δ_ortho < 0) with the E were observed. In the case of ortho substituents in the phenyl part, the resonance effect was negligible. Due to inductive effect, the ortho electron‐withdrawing substituents showed an upfield shift or shielding of the carbonyl carbon, while the electron‐donating substituents had an opposite effect. Because of the sterical consequences, ortho substituents revealed a deshielding effect on the ¹³C NMR chemical shift of the carbonyl carbon. For all the meta‐ and para‐substituted esters, the reverse substituent‐induced inductive and resonance effects (ρ_I < 0, ρ_R < 0) were found to be significant. In alkyl benzoates, the alkyl substituents showed the reverse inductive and steric effects. The log k values for the alkaline hydrolysis in water, aqueous 0.5 M Bu₄NBr and 2.25 M Bu₄NBr, and the IR frequencies, ν_CO, for the ortho‐, meta‐, and para‐substituted phenyl benzoates and alkyl benzoates were correlated nicely with the corresponding ¹³C NMR substituent chemical shifts, Δδ_CO. Copyright © 2009 John Wiley & Sons, Ltd.