Amphiphilic β‐cyclodextrin‐based star‐like block copolymer unimolecular micelles for facile in situ preparation of gold nanoparticles

Multifunctional polymer unimolecular micelles, which are used as templates to fabricate stable gold nanoparticles (GNPs) in one‐step without external reductant, have been designed and prepared. Amphiphilic 21‐arm star‐like block copolymers β‐cyclodextrin‐{poly(lactide)‐poly(2‐(dimethylamino) ethyl methacrylate)‐poly[oligo(2‐ethyl‐2‐oxazoline)methacrylate]}₂₁ [β‐CD‐(PLA‐PDMAEMA‐PEtOxMA)₂₁] and the precursors are synthesized by the combination of ring‐opening polymerization (ROP) and activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP). The tertiary amine groups of PDMAEMA block reduce the counterion to zerovalent gold in situ, and these gold atoms combine mutually to form final GNPs. GNPs with relatively small size and narrow size distribution can be obtained in longer DMAEMA block copolymer, larger molar ratio of DMAEMA to HAuCl₄ and smaller absolute concentrations of both polymer and HAuCl₄. These results showed that the unimolecular micelles can be used as templates for preparing and stabilizing GNPs in situ without any external reducing agents and organic solvents, suggesting that the nanocomposite systems are latent nanocarriers for further biomedical application. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 186–196     

Using controlled radical polymerization to confirm the lower critical solution temperature of an N‐(alkoxyalkyl) acrylamide polymer in aqueous solution

N‐(3‐Methoxypropyl) acrylamide (MPAM) was polymerized by controlled radical polymerization (CRP) methods such as nitroxide‐mediated polymerization (NMP) and reversible addition–fragmentation chain‐transfer polymerization (RAFT). CRP was expected to yield well‐defined polymers with sharp lower critical solution temperature (LCST) transitions. NMP with the BlocBuilder (2‐([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino]oxy)‐2‐methylpropanoic acid) and SG1 ([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino] oxidanyl) initiating system revealed low yields and lack of control (high dispersity, ? ～ 1.5–1.6, and inhibition of chain growth). However, RAFT was far more effective, with linear number average molecular weight, , versus conversion, X, plots, low ? ～ 1.2–1.4 and the ability to form block copolymers using N,N‐diethylacrylamide (DEAAM) as the second monomer. Poly(MPAM) (with = 13.7–25.3 kg mol^?1) thermoresponsive behavior in aqueous media revealed cloud point temperatures (CPT)s between 73 and 92 °C depending on solution concentration (ranging from 1 to 3 wt %). The and the molecular weight distribution were the key factors determining the CPT and the sharpness of the response, respectively. Poly(MPAM)‐b‐poly(DEAAM) block copolymer ( = 22.3 kg mol^?1, ? = 1.41, molar composition F_DEAAM = 0.38) revealed dual LCSTs with both segments revealing distinctive CPTs (at 75 and 37 °C for poly(MPAM) and poly(DEAAM) blocks, respectively) by both UV–Vis and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 59–67     

Construction of excellent thermal latent system for the synthesis of networked epoxide polymers by sulfonium salts

An efficient thermally latent initiation system using dual sulfonium salts, consisting S‐benzylsulfonium salt 1 bearing counter anion and S,S‐dimethylsulfonium salt 2 bearing CH₃ counter anion, has been developed for the cationic polymerization of epoxides. Compared to the conventional system using 1 as a thermally latent initiator, the newly developed system allowed significant improvement of stability of epoxy formulations during storage at ambient temperature without sacrificing their curability at elevated temperatures. Such a remarkable performance is attributable to the nucleophilic attack of CH₃ to cationic species formed unavoidably by the reaction of 1 with epoxide. Such entrapment of cationic species into the corresponding dormant led to the inhibition of undesirable chain growth of polymers during storage of epoxy formulations. In addition, the dormant can undergo dissociation at elevated temperature to give cationic species, which can readily initiate the polymerization of epoxide. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2096–2102     

Effect of tetra‐n‐butylammonium bromide salt on the cationic polymerization of dimethylketene and on the thermal properties of the obtained polyketones

The cationic polymerization of dimethylketene is achieved in dichloromethane at ?30 °C, using a stoichiometric mixture of aluminum bromide (AlBr₃) and tetra‐n‐butylammonium bromide (n‐Bu₄N⁺Br^?) as initiator. Characterizations by ¹H and ¹³C NMR show that the resulting polymers have a perfect polyketonic microstructure. Capillary viscosity, DSC, and SEC analysis show that for a constant monomer/initiator ratio, polymers synthesized in the presence of tetra‐n‐butylammonium bromide are more crystalline and have better properties than those produced only with AlBr₃. Melting temperatures, inherent viscosities and average molecular weights are systematically higher. A good linearity is observed between ln (inherent viscosity) versus ln for the system with n‐Bu₄N⁺Br^?, showing a good control of the molecular weight by the initial feed ratio. The effect of this compound suggests a reversible equilibrium between active and dormant species, which limits the transfer and/or termination reactions, and enables a better control of the cationic polymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1493–1499     

Single‐electron transfer‐living radical polymerization of oligo(ethylene oxide) methyl ether methacrylate in the absence and presence of air

The efficient Cu(0) wire‐catalyzed single‐electron transfer‐living radical polymerization (SET‐LRP) of oligo(ethylene oxide) methyl ether methacrylate (OEOMA) in DMSO and binary mixtures of DMSO with H₂O is reported. Addition of 10–80% H₂O to DMSO resulted in an increase in the apparent rate constant of propagation ( ), corresponding to an increase in the polarity and extent of disproportionation. At higher H₂O content, decreases, and in H₂O is slightly lower than that in DMSO. This unexpected behavior was attributed to the physical inaccessibility of Cu(0) wire catalyst to the hydrophobic reactive centers of OEOMA and initiator which self‐assemble in H₂O into micellar aggregates and vesicles. This hypothesis was confirmed by the faster polymerization in H₂O than in DMSO during catalysis with Cu(0) nanoparticles generated by disproportionation of CuBr. SET‐LRP of OEOMA can be performed in protic and dipolar aprotic solvents in air by the addition of hydrazine hydrate. The polymerization exhibited no induction period and identical as in the degassed experiment, and led to polymers with narrow molecular weigh distribution. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3110–3122     

Synthesis and properties of long‐chain branched poly(ether sulfone)s by self‐polycondensation of AB2 type macromonomers

Long‐chain branched poly(ether sulfone)s (PESs) were synthesized via self‐polycondensation of AB₂ macromonomers. The linear PES oligomers synthesized by self‐polycondensation of 4‐chloro‐4′‐(4‐hydroxyphenyloxy)diphenyl sulfone were terminated with 4‐(3,5‐methoxyphenoxy)‐4′‐fluorodiphenyl sulfone to form AB₂ macromonomer precursors. After conversion from methoxy to hydroxy groups, the AB₂ macromonomers were self‐polycondensed to form long‐chain branched PESs. NMR measurements support the formation of the target macromonomers ( = 2930–67,800 (g mol^?1); M_n = number average molecular weight) and long‐chain branched PESs. Gel permeation chromatography with multiangle light scattering measurements indicated the formation of high‐molecular‐weight (M_w) polymers over 10⁴. The root‐mean‐square radius of gyration (R_g) suggests that the shape of the long‐chain branched PES synthesized from small AB₂ macromonomers in solution is similar to that of hyperbranched polymers. Increasing resulted in larger R_g, suggesting a transition from hyperbranched to a linear‐like architecture in the resulting long‐chain branched PESs. Rheological measurements suggested the presence of strongly entangled chains in the long‐chain branched PES. Higher tensile modulus and smaller elongation at the break were observed in the tensile tests of the long‐chain branched PESs. It is assumed that the enhanced molecular entanglement points may act as physical crosslinks at room temperature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1825–1831     

Cationic polymerization of vinyl ethers with alkyl or ionic side groups in ionic liquids

Controlled cationic polymerization of isobutyl vinyl ether was demonstrated to proceed in an ionic liquid (IL), 1‐butyl‐3‐octylimidazolium bis(trifluoromethanesulfonyl)imide, using a 1‐(isobutoxy)ethyl acetate/TiCl₄ initiating system, ethyl acetate as an added base, and 2,6‐di‐tert‐butylpyridine as a proton trap reagent. Judicious choices of metal halide catalysts, counteranions of ILs, and additives were essential for controlling the polymerization. The polymerization proceeded much faster in the IL than in CH₂Cl₂, indicating an increased population of ionic active species in the IL due to the high polarity. Polymers with a relatively narrow molecular weight distribution were obtained in the IL with a bis(trifluoromethanesulfonyl)imide ( ) anion even in the absence of an added base, which suggested possible interactions of the counteranion of the IL with the growing carbocations. Moreover, the direct cationic polymerization of a vinyl ether with pendant imidazolium salts, 1‐(2‐vinyloxyethyl)‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide, proceeded in a homogeneous state in 1‐methyl‐3‐octylimidazolium bis(trifluoromethanesulfonyl)imide. The solubilities of the obtained polymers were readily tuned by counteranion exchange. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1774–1784     

Synthesis of gradient copolysiloxanes by simultaneous copolymerization of cyclotrisiloxanes and mechanism for kinetics inverse between anionic and cationic ring‐opening polymerization

Trifluoropropylmethylsiloxane–phenylmethylsiloxane gradient copolysiloxanes were synthesized by anionic and cationic ring‐opening polymerization (ROP) of 1,3,5‐tris(trifluoropropylmethyl)cyclotrisiloxane ( ) and phenylmethylcyclotrisiloxane ( ). The analysis of reactivity ratios revealed that the reactivity of toward anionic ROP was higher than that of ; however, exhibited lower reactivity compared with during the cationic ROP. AB and BAB type gradient copolymers were obtained because of a difference in the reactivity of the monomers. The microstructure of copolymers was characterized by ²⁹Si NMR spectroscopy, gel permeation chromatography, and differential scanning calorimetry. Furthermore, the mechanism for kinetics inverse of copolymerization was proposed based on the results of the optimized molecular configuration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 835–843     

Heterofunctional RAFT‐derived PNIPAM via cascade trithiocarbonate removal and thiol‐yne coupling click reaction

An efficient one‐pot process to functionalize the α‐ and ω‐positions of RAFT‐derived poly(N‐isopropylacrylamide) (PNIPAM) by two inherently different mechanistic pathways is reported. The method relies on the RAFT polymerization of NIPAM using a new alkyne‐based RAFT agent, namely 2‐cyano‐5‐oxo‐5‐(prop‐2‐yn‐1‐ylamino)pentan‐2‐yl dodecyltrithiocarbonate (COPYDC) and the combination of thiol‐yne click chemistry and thiocarbonylthio chain‐end removal reactions. COPYDC was prepared in good yield and used as an efficient chain transfer agent during the RAFT polymerization of NIPAM. Well‐defined polymers with controlled molar masses ( = 7500–14,700 g.mol^?1) and narrow dispersities (? = 1.18–1.26) are thus obtained. Cascade thiol‐yne click reaction at the alkyne α‐chain end and trithiocarbonate removal at the ω‐chain end are successfully achieved using benzyl mercaptan and excess AIBN. The reported method provides a facile and mild route to heterofunctional telechelic RAFT polymers with predictable molar masses and low dispersities. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3597–3606     

Preparation and orthogonal postmodification of dual‐clickable polymer precursors bearing both aldehyde and alkyne groups

A new styrenic monomer 2‐propargyloxy‐5‐vinylbenzaldehyde (PVB) containing both aldehyde and alkyne reactive groups was designed for the synthesis and subsequent orthogonal postfunctionalization of dual‐clickable polymer precursor. Reversible addition‐fragmentation chain transfer polymerization of PVB afforded a structurally well‐defined polymer poly(2‐propargyloxy‐5‐vinylbenzaldehyde) (PPVB) bearing alkyne and aldehyde functionalities that are reactive towards azide ‐ and aminooxy‐containing molecules, respectively. Therefore, the resulting PPVB can be served as a dual‐clickable polymer scaffold for construction of multiple functional polymers via orthogonal alkyne–azide and aldehyde–aminooxy click reactions. Postpolymerization modification of PPVB sequentially with aminooxy‐terminated poly(ethylene oxide)s (H₂NO‐PEO) and azide‐functionalized imidazolium‐type ionic liquid (N₃‐IL·TFSI, having bis(trifluoromethane)sulfonamide, TFSI, counter‐anion) yielded an interesting multicomponent graft polymer PPVB‐g‐(PEO‐and‐IL·TFSI). After anion exchange of hydrophobic TFSI counter‐anion by bromide (Br) anion, the resulting graft copolymer PPVB‐g‐(PEO‐and‐IL·Br) becomes soluble in water, and its imidazolium units can capture negatively charged tetraphenylethylene disulfonate derivative (TPE‐2 ) guest molecule via electrostatic complexation to form in situ self‐assembled fluorescent nanoaggregates with colloidal stability imparted by hydrophilic PEO chains. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2650–2656     

Synthesis and fractionation of poly(phenylene methylene)

Poly(phenylene methylene) (PPM) was isolated in a broad range of molar masses by optimization of the catalytic polymerization of benzyl chloride with SnCl₄ or FeCl₃, followed by fractionation by Soxhlet extraction or phase separation in concentrated solutions in poor solvents. Low molar mass products were also obtained by quenching the reaction at moderate monomer conversions. Products with number average molar masses (M_n) ranging from 200 to 61,000 g mol⁻¹ were isolated, the latter being an order of magnitude above the previously reported values. DSC analysis of polymers of different molar masses revealed that the glass transition temperature follows the Flory‐Fox equation reaching a plateau value of 65 °C at a molar mass between 10,000 and 20,000 g mol⁻¹. The onset of decomposition temperature of higher molar mass products proceeds above 450 °C (maximum decomposition rate at 515 °C), according to TGA. Furthermore, the substitution pattern of PPM was discussed by study of chemical shifts of the methylene group by extensive NMR spectroscopy (¹H, ¹³C, DEPT, and HSQC) and by comparison with two mono‐substituted derivatives of PPM—poly(2,4,6‐trimethylphenylene methylene) and poly(2,3,5,6‐tetramethylphenylene methylene)—which were synthesized analogous to PPM. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 309–318     

Microwave‐assisted ring‐opening polymerization of ϵ‐caprolactone

Ring‐opening polymerization of ?‐caprolactone was carried out smoothly and effectively with constant microwave powers of 170, 340, 510, and 680 W, respectively, with a microwave oven at a frequency of 2.45 GHz. The temperature of the polymerization ranged from 80 to 210 °C. Poly(?‐caprolactone) (PCL) with a weight‐average molar mass (M_w) of 124,000 g/mol and yield of 90% was obtained at 680 W for 30 min using 0.1% (mol/mol) stannous octanoate as a catalyst. When the polymerization was catalyzed by 1% (w/w) zinc powder, the M_w of PCL was 92,300 g/mol after the reaction mixture was irradiated at 680 W for 270 min. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1749–1755, 2002     

Novel pendent thiophene side‐chained benzodithiophene for polymer solar cells

In this article, pendent thiophene (2‐butyl‐5‐octylthiophene) side chain is used to modify the backbone of the polymers containing benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and thieno[3,4‐c]pyrrole‐4,6‐dione (TPD). Compared with the dodecyloxy side‐chained polymer (P1), pendent thiophene‐based polymers (P2 and P3) show similar number‐average molecular weight (M_n), polydispersity index, thermal stability (T_d ～ 334–337 °C), and optical band gaps ( ) (～1.8 eV). Polymer (P2)‐based BDT with pendent thiophene and ethylhexyl‐modified TPD shows relatively low‐lying HOMO energy level (?5.52 eV) and nearly 1 V high open circuit voltage (V_OC). The polymer solar cell devices based on three copolymers show power conversion efficiencies from 2.01% to 4.13%. The hole mobility of these polymers tested by space charge limited current method range from 3.4 × 10^?4 to 9.2 × 10^?4 cm²V^?1s^?1. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1558–1566     

Catalytic chain transfer polymerization of isobutylene: The role of nucleophilic impurities

Fast polymerization of isobutylene (IB) initiated by tert‐butyl chloride using ethylaluminum dichloride·bis(2‐chloroethyl) ether complex (T. Rajasekhar, J. Emert, R. Faust, Polym. Chem. 2017, 8, 2852) was drastically slowed down in the presence of impurities, such as propionic acid, acetone, methanol, and acetonitrile. The effect of impurities on the polymerization rate was neutralized by using two different approaches. First, addition of a small amount of iron trichloride (FeCl₃) scavenged the impurity and formed an insoluble · impurity complex in hexanes. The polymerization rate and exo‐olefin content were virtually identical to that obtained in the absence of impurities. Heterogeneous phase scavenger (FeCl₃) exhibited better performance than homogenous phase scavengers. In the second approach, conducting the polymerization in wet hexanes, the fast polymerization of IB was retained in the presence of impurities with a slight decrease in exo‐olefin content. ¹H NMR studies suggest that nucleophilic impurities are protonated in the presence of water, and thereby neutralized. Mechanistic studies suggest that the rate constant of activation (k_a), rate constant of propagation (k_p), and rate constant of β‐proton elimination (k_tr) are not affected by the presence of impurities. To account for the retardation of polymerization in the presence of impurities, delay of proton transfer to monomer in the chain transfer step is proposed. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3697–3704     

Synthesis,thermal analysis,and linear and nonlinear optical characterization of substituted polyphosphonates derived from 1,12‐dodecanediol

The syntheses of a series of substituted polyphosphonates of the type [OP(X)(Ar)O(CH₂)₁₂]_n (X = O, S, Se; Ar = phenyl, 2,2′‐bithienyl‐5‐yl) are reported. The s for the polyphosphonates range from 1.1 to 4.6 × 10⁴ Da and are significantly higher than those previously reported for polyphosphonates synthesized via polycondensation reactions. Thermal characterization indicates that all of the polymers are in the rubbery state at room temperature and have thermal stabilities as high as 290 °C. The linear absorption spectra, emission spectra, and emission quantum yields of the 2,2′‐bithenyl‐5‐yl substituted polyphosphonates show distinct trends with respect to the chalcogen attached to the phosphorus. Solutions of these polymers show emission at wavelengths ranging from 380 to 400 nm and, depending on the choice of X, the quantum yields are considerably larger than that of 2,2′‐bithiophene. Nonlinear optical measurements of the polyphosphonates with 2,2′‐bithenyl‐5‐yl substituents show that nonlinear absorbance increases with increasing molecular weight of X. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3663–3674     

Anionic ring‐opening polymerization of propylene oxide in the presence of phosphonium catalysts

Anionic ring‐opening polymerization of propylene oxide in the presence of potassium alcoholate initiator was accelerated by addition of the bulky phosphonium salt tetrakis[cyclohexyl(methyl)amino]phosphonium‐tetrafluoroborate. Dipropylene glycol (DPG) was partially deprotonated (5%) and used as an initiator for the polymerization performed at 100 °C at normal pressure. The delocalization of the positive charge over five atoms promoted the formation of a separated ion pair, thus enhancing nucleophilicity and reactivity. Compared with those of polyaminophosphazenes and tetrabutylphosphonium cation, the average propagation rates increased in the order of Bu₄P⁺, K⁺, P, P, and ^tBuP₄H⁺. DP_n for the polymers was in the range of 20–64. Characterization of poly(propylene oxide)s by means of ¹H NMR, size exclusion chromatography (SEC), and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) showed low polydispersities (M_w/M_n) without any byproducts or impurities. The M_w/M_n obtained was 1.03–1.09 (MALDI‐TOF‐MS) and 1.11–1.15 (SEC), respectively. Values calculated from titration of the hydroxyl groups showed good agreement. Determination of the total degree of unsaturation in the range of 13–60 mmol/kg indicated larger amounts with increasing polymerization rates. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 864–873, 2002; DOI 10.1002/pola.10163     

A Precision Ethylene‐Styrene Copolymer with High Styrene Content from Ring‐Opening Metathesis Polymerization of 4‐Phenylcyclopentene

Ring‐opening metathesis polymerization of 4‐phenylcyclopentene is investigated for the first time under various conditions. Thermodynamic analysis reveals a polymerization enthalpy and entropy sufficient for high molar mass and conversions at lower temperatures. In one example, neat polymerization using Hoveyda–Grubbs second generation catalyst at −15 °C yields 81% conversion to poly(4‐phenylcyclopentene) (P4PCP) with a number average molar mass of 151 kg mol⁻¹ and dispersity of 1.77. Quantitative homogeneous hydrogenation of P4PCP results in a precision ethylene‐styrene copolymer (H₂‐P4PCP) with a phenyl branch at every fifth carbon along the backbone. This equates to a perfectly alternating trimethylene‐styrene sequence with 71.2% w/w styrene content that is inaccessible through molecular catalyst copolymerization strategies. Differential scanning calorimetry confirms P4PCP and H₂‐P4PCP are amorphous materials with similar glass transition temperatures (T_g) of 17 ± 2 °C. Both materials present well‐defined styrenic analogs for application in specialty materials or composites where lower softening temperatures may be desired.

     

Macromonomer synthesis using α‐(2‐methyl‐2‐phenylpropyl)acrylates as addition–fragmentation chain‐transfer agents expelling the cumyl radical

α‐(2‐Methyl‐2‐phenylpropyl)acrylate (RS‐2) was examined as a C? C bond‐cleavage type addition–fragmentation chain transfer (AFCT) agent in the benzene solution polymerizations of styrene (St), ethyl methacrylate (EMA), and cyclohexyl acrylate (CHA) with the objective of achieving efficient macromonomer synthesis by radical polymerization. The AFCT efficiency was evaluated in terms of the decrease in the number‐average molecular weight (M_n) upon the addition of the AFCT agent and the number of unsaturated end groups introduced per chain (f). The AFCT efficiency was rationalized by the consideration of the relative importance of AFCT as an end‐forming event and the competition between ‐fragmentation and crosspropagation as adduct radical reaction pathways. In St and EMA polymerizations at 60 °C, RS‐2 resulted in higher f values and lower M_n values than methyl α‐(2‐methyl‐2‐carbomethoxypropyl)acrylate (MMA‐2), and this suggested the facilitation of ‐fragmentation due to the expulsion of the more stable cumyl radical from the RS‐2 adduct radical. Higher f values were observed for MMA‐2 than for RS‐2 in CHA polymerization because of unsaturated end group formation by ‐fragmentation of midchain radicals. However, RS‐2 resulted in lower M_n values for poly(CHA) than MMA‐2 because of a smaller contribution of crosspropagation. Retardation in the presence of the AFCT agents was affected by the balance between b‐fragmentation and crosspropagation and by the addition rate of the propagating radical to the AFCT agent. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6021–6030, 2004     

Facile synthesis of Au@PNIPAM‐b‐PPy nanocomposites with thermosensitive and photothermal effects

In this article, we reported a facile method to in‐situ synthesize Au@PNIPAM‐b‐PPy nanocomposites with thermosensitive and photothermal effects using amphiphilic poly(N‐isopropylacrylamide)‐block‐poly(pyrrolylmethylstyrene) (PNIPAM‐b‐PPMS) diblock copolymers as ligands. The hydrophobic PPMS block can in‐situ reduce to zero‐valent gold and simultaneously be oxidatively copolymerized with the free pyrrole monomers to form a crosslinked and conjugated polypyrrole (PPy) layer. The hydrophilic PNIPAM block as a stabilizer can produce highly thermosensitive effect. Moreover, the resultant Au@PNIPAM‐b‐PPy nanomaterials show a strong absorption in the near infrared (NIR) region, which endowed the system excellent photothermal effect. On the basis of the PPy photothermal and PNIPAM thermosensitive effects, the above Au@PNIPAM‐b‐PPy nanomaterials show a reversible, soluble‐precipitate transition upon the NIR irradiation off‐on. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3079–3085     

Stereospecific and molecular weight‐controlled polymerization of 1,3‐butadiene with Co(acac)3‐MAO catalyst

The polymerization of butadiene (Bd) with Co(acac)₃ in combination with methylaluminoxane (MAO) was investigated. The polymerization of Bd with Co(acac)₃‐MAO catalysts proceeded to give cis‐1,4 polymers (94 – 97%) bearing high molecular weights (40 × 10⁴) with relatively narrow molecular weight distributions (M_w's/M_n's). The molecular weight of the polymers increased linearly with the polymer yield, and the line passed through an original point. The polydispersities of the polymers kept almost constant during reaction time. This indicates that the microstructure and molecular weight of the polymers can be controlled in the polymerization of Bd with the Co(acac)₃‐MAO catalyst. The effects of reaction temperature, Bd concentration, and the MAO/Co molar ratio on the cis‐1,4 microstructure and high molecular weight polymer in the polymerization of Bd with Co(acac)₃‐MAO catalyst were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2793–2798, 2001