pH and reduction dual‐stimuli‐responsive PEGDA/PAMAM injectable network hydrogels via aza‐michael addition for anticancer drug delivery

A pH and reduction dual‐stimuli‐responsive PEGDA/PAMAM injectable network hydrogel containing “acetals” as pH‐sensitive groups and “disulfides” as reducible linkages was designed and synthesized via aza‐Michael addition reaction between PAMAM and PEGDA diacrylates. The pore size and swelling ratio of hydrogels was varied from 14 ± 3 to 19 ± 4 μm and 214 ± 13 to 300 ± 19 μm, respectively, with varying ethylene glycol repeating units in diacrylates. The swelling ratio of PEGDA/PAMAM network hydrogel increased with increase in the molecular weight of PEG and with decrease in pH. The presence of different cationizable amino‐functionalities in PEGDA/PAMAM network hydrogel helped to enhance the swelling ability of hydrogel under the acidic conditions. The continuous increase in metabolically active live HeLa cells with time in MTT assay implied biocompatibility/noncytotoxicity of the synthesized PEGDA/PAMAM injectable network hydrogel. Furthermore, the prepared PEGDA/PAMAM hydrogel showed higher degradation at lower pH and at higher concentration of DTT. The burst release of doxorubicin from PEGDA/PAMAM hydrogel under the environment of the lower pH and in presence of DTT compared to the release at normal physiological pH and in absence of DTT suggested the potential ability of this model hydrogel system for targeted and selective anticancer drug release at tumor tissues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2080–2095     

Elucidation of the Mechanism of Enhanced Insulin Uptake and Release from pH Responsive Hydrogels

Summary: Environmentally responsive hydrogels composed of poly(methacrylic acid-g-ethylene glycol) (P(MAA-g-EG)) have shown promise for oral insulin delivery due to their pH responsive complexation behavior. A series of hydrogel formulations were polymerized with varying amounts of crosslinker and varying monomer volume fraction. The mesh size of the network depended primarily on pH, varying from 8.0 to 27.2 nm. Insulin loading efficiency varied directly with crosslink density, ranging from 42.7 to 84.9% of available insulin loaded into the hydrogels. The release of insulin was performed with each polymer formulation at 5 pH levels ranging from 2.7 to 6.8. Insulin release was less than 20% for all formulations tested with insulin for the duration of the 3 hour release study for all pH levels considered except when the pH was 6.8, at which point the release occurred as a burst. Loading studies performed with insulin glargine, an insulin analog with an increased pI, showed the same trends as native insulin. However, the release of insulin glargine only occurred at a pH level above that of the pI of the protein. These results indicate that hydrogen bonds and ionic interactions between the protein and P(MAA-g-EG) may strongly influence its loading and release behavior in vitro.     

Continuous Detection of pH‐responsive Drug Delivery System in Cells in situ by Confocal Laser Scanning Microscopy

Mesoporous silica nanoparticles (MSN) were coated by pH‐responsive polymer chitosan‐poly (methacrylic acid) (CS‐PMAA). This nano drug delivery system showed good application prospects and the polymer‐coated microspheres were promising site‐specific anticancer drug delivery carriers in biomedical field. A continuous detection of pH‐responsive drug delivery system in cells in situ, utilizing MSN/CS‐PMAA composite microspheres, was proposed. Two kinds of different cell lines, tumor cell line (Hela) and normal somatic cells (293T), were used to investigate the behaviours of the drug loaded system in the cells. Conclusions could be drawn from the fluorescent images obtained by confocal laser scanning microscopy (CLSM), modified drug‐loaded microspheres (MSN/CS‐PMAA) were ingested into cells more easily, the uptake of DOX@FITC‐MSN/CS‐PMAA by HeLa/293T cells were performed at pH 7.4/pH 6.8, DOX was released during the ingestion process, fluorescence intensity decreased with time because of efflux transport and photo‐bleaching. Fluoresence detection by flow cytometry was performed as comparison. The continuous fluorescent observation in situ could be widely used in the pH‐responsive releasing process of drug delivery system in the cells.     

Preparation and properties of redox responsive modified hyaluronic acid hydrogels for drug release

A series of oxidized hyaluronic acid (oxi‐HA)/3,3′‐dithiobis (propionohydrazide) (DTP) redox responsive hydrogels by Schiff base reaction under physiological conditions were designed and prepared. The influence of the concentration of oxi‐HA and DTP on rheological properties, equilibrium swelling ratio, and degradation rate were investigated. All oxi‐HA/DTP hydrogels exhibited good rheological properties, high equilibrium swelling ratio, low degradation rate, and sustainable drug release properties, and the comprehensive performance of oxi‐HA5/DTP6 hydrogel was better than that of others. The redox responsiveness was evaluated by means of degradation and in vitro bovine serum albumin release behavior investigation with the stimulus of different concentration of dithiothreitol as reducing agent. The intelligent hydrogels could be potentially applied in the fields of drug delivery system, tissue engineering, or cell scaffold materials. Copyright © 2017 John Wiley & Sons, Ltd.     

Drug release of pH/temperature-responsive calcium alginate/poly(N-isopropylacrylamide) semi-IPN beads

A series of semi-interpenetrating, polymer network (semi-IPN), hydrogel beads, composed of calcium alginate (Ca-alginate) and poly(N-isopropylacrylamide) (PNIPAAM), were prepared for a pH/temperature-sensitive drug delivery study. The equilibrium swelling showed the independent pH- and thermo- responsive nature of the developed materials. At pH=2.1, the release amount of indomethacin incorporated into these beads was about 10% within 400 min, while this value approached to 95% at pH=7.4. The release rate of the drug was higher at 37 degrees C than that at 25 degrees C and increased slightly with increasing PNIPAAM content. These results suggest that the Ca-alginate/PNIPAAM beads have the potential to be used as an effective pH/temperature sustainable delivery system of bioactive agents. [GRAPHS: SEE TEXT] A summary of the temperature- and pH-dependence on the release of the drug over a period of 450 min. The effect of the temperature on the swelling of the beads is shown in the inset.     

Synthesis and characterization of a starch‐modified hydrogel as potential carrier for drug delivery system

Synthesis and characterization of a new hydrogel were carried out using a chemically modified starch (starch‐M) consisting of coupling C?C bounds coming from glycidil methacrylate (GMA) onto the polysaccharide structure. ¹³C NMR, ¹H NMR, and FT‐IR spectroscopies were used to confirm the incorporation of such groups onto the starch‐M. The hydrogel was prepared by a crosslinking polymerization of starch‐M using sodium persulfate as an initiating agent. The starch‐M hydrogel shows morphology clearly different from that of the raw starch film due to the presence of voids on its surface. The swelling process of the starch‐M hydrogel was not significantly affected by changes on the temperature or on pH of the surrounding liquid, indicating the such behavior can be then understood by a diffusional process, resulting from its physical–chemical interactions with the solvent. The values of the diffusional exponent n were on the order of 0.45–0.49 for the range of pHs investigated, demonstrating that the water transport mechanism of starch‐M hydrogel is more dependent on Fickian diffusion, that is, controlled by water diffusion. Such starch‐M hydrogel is a promising candidate to be used in transporting and in preserving acid‐responsive drugs, such as corticoids, for the treatment of colon‐specific diseases, for example, Crohn's disease. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2567–2574, 2008     

Fabrication of polyvinyl alcohol/chitosan oligosaccharide hydrogel: physicochemical characterizations and in vitro drug release study

Abstract

Hydrogel composites from polyvinyl alcohol and chitosan have been developed by various researchers as a function of their composition for various medical applications. Although, the solubility of chitosan in acidic solvents may limit its wide bioengineering applications. In this article, we demonstrate that polyvinyl alcohol-chitosan oligosaccharide (water soluble) to develop cross-linked hydrogel network using chemical cross linker. X ray diffraction, Fourier transform infrared spectroscopy, and wettability study of these hydrogels were also performed. Lomefloxacin drug was loaded into the hydrogels and its release profile was studied.     

Design,Synthesis, and Application of Stimulus‐Sensing Biohybrid Hydrogels

A key feature of any living system is the ability to sense and react to the environmental stimuli. The biochemical characterization of the underlying biological sensors combined with advances in polymer chemistry has enabled the development of stimulus‐sensitive biohybrid materials that translate most diverse chemical and biological input into a precise change in material properties. In this review article, we first describe synthesis strategies of how biological and chemical polymers can functionally be interconnected. We then provide a comprehensive overview of how the different properties of biological sensor molecules such as competitive target binding and allosteric modulation can be harnessed to develop responsive materials with applications in tissue engineering and drug delivery.

     

Synthesis and Unusual Swelling Behavior of Combined Cationic/Non‐Ionic Hydrogels Based on Chitosan

Hydrogel‐forming copolymers based on chitosan grafted with different amounts of polyacrylamide were synthesized and its swelling capacity determined in distilled water, sodium chloride solutions, as well as in buffer solutions at pH 1.2 and 8.0. The resulting products are highly efficient as hydrogel‐forming materials with swelling at equilibrium going approximately from 300 to 3 000 times the volume of the dry solid polymer in all the investigated media. The products, different to usual hydrogels, swells considerably more and quickly in electrolyte‐containing solutions compared to in distilled water. This has been attributed to their structure that contains non‐ionic polyacrylamide macromolecules grafted onto the trunk polymer chitosan, which is cationic in nature. In‐vitro drug‐release behavior of formulations containing grafted copolymers have been tested using theophylline as a water‐soluble drug and the results were compared with similar formulations containing unmodified chitosan. It was found that tablets based on formulations containing grafted chitosan show higher erosion and swelling compared with those of the matrix based on unmodified chitosan, leading to a higher fraction of theophylline released. It can be concluded that formulations based on the synthesized copolymers are potentially useful for fluid absorbency and as prolonged drug‐release matrices.

The swelling of one of the hydrogels studied here.     

Preparation and Characterization of a Novel Drug Delivery System: Biodegradable Nanoparticles in Thermosensitive Chitosan/Gelatin Blend Hydrogels

A novel injectable in situ gelling drug delivery system (DDS) consisting of biodegradable N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (HTCC) nanoparticles and thermosensitive chitosan/gelatin blend hydrogels was developed for prolonged and sustained controlled drug release. Four different HTCC nanoparticles, prepared based on ionic process of HTCC and oppositely charged molecules such as sodium tripolyphosphate, sodium alginate and carboxymethyl chitosan, were incorporated physically into thermosensitive chitosan/gelatin blend solutions to form the novel DDSs. Resulting DDSs interior morphology was evaluated by scanning electron microscopy. The effect of nanoparticles composition on both the gel process and the gel strength was investigated from which possible hydrogel formation mechanisms were inferred. Finally, bovine serum albumin (BSA), used as a model protein drug, was loaded into four different HTCC nanoparticles to examine and compare the effects of controlled release of these novel DDSs. The results showed that BSA could be sustained and released from these novel DDSs and the release rate was affected by the properties of nanoparticle: the slower BSA release rate was observed from DDS containing nanoparticles with a positive charge than with a negative charge. The described injectable drug delivery systems might have great potential application for local and sustained delivery of protein drugs.     

Enzyme and pH dual responsive l‐amino acid based biodegradable polymer nanocarrier for multidrug delivery to cancer cells

We report a new pH and enzyme dual responsive biodegradable polymer nanocarrier to deliver multiple anticancer drugs at the intracellular compartment in cancer cells. Natural l ‐aspartic acid was converted into multifunctional monomer and polymerized to yield new classes of biodegradable aliphatic polyester in‐build with pH responsiveness. The transformation of side chain BOC urethanes into cationic in the acidic endosomal environment disassembled the polymers nanoparticles (pH trigger‐1). The biodegradation of aliphatic polyester backbone by esterase enzyme ruptured the nanoassemblies and released the drugs in the cytoplasm (trigger‐2). The polymer scaffolds were capable of delivering multiple drugs such as doxorubicin, topotecan, and curcumin (CUR). The cytotoxicity of the nascent and drug‐loaded nanoparticles were tested in cervical (HeLa) and breast (MCF‐7) cancer cell lines. The nascent polymer nanoscaffolds were found to be nontoxic to cells whereas their drug‐loaded nanoparticles exhibited excellent killing. Confocal microscopic images revealed that the drug‐loaded polymer nanoparticles were taken up by the cells and the dual degradation process delivered the drugs to nucleus and established the proof‐of‐concept. The present investigation opens up new platform for l ‐amino acid based polyester scaffolds, for the first time, in the intracellular drug delivery in cancer treatment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3279–3293     

Preparation and release profiles of pH/temperature-responsive carboxymethyl chitosan/P(2-(dimethylamino) ethyl methacrylate) semi-IPN amphoteric hydrogel

Thermo- and pH-responsive semi-IPN polyampholyte hydrogels were prepared by using carboxymethyl chitosan and P(2-(dimethylamino) ethyl methacrylate) with N N'-Methylenebisacrylamide (BIS) as crosslinking agent. It was found that the semi-IPN hydrogel shrunk most at the isoelectric point (IEP) and swelled when pH deviated from the IEP. Its swelling ratio dramatically decreased between 30 and 50 °C at pH 6.8 buffer solution. It also showed good reversibility. The UV results showed that when the pH values of drug release medium were 3.7, 6.8, and 9 at 25 °C, the cumulative release rates reached 83.1, 51.5, and 72.2%, respectively. The release rate of coenzyme A (CoA) was higher at 50 °C than 37 and 25 °C at pH 6.8 solution. The release rate decreased with increasing the content of carboxymethyl chitosan at 25 °C in pH 6.8 solution. The results showed that semi-IPN hydrogel seems to be of great promise in pH/temperature drug delivery systems.     

共价键合修饰壳聚糖pH传感器的研制

以共价键合的方法将壳聚糖修饰到玻碳电极上制成了pH传感器,探讨了该传感器的性能及作用机理.结果表明该传感器在pH 0.7～11.0的范围内电极电势与pH符合Nernst响应,斜率为58.3 mV/pH,可准确测定较高酸度溶液的pH,克服了玻璃pH传感器的"酸误差"的缺点.该传感器内阻小,易微型化,在一定的pH范围内对温度不敏感且具有较好的准确度和重现性,较快的响应速度.可用于雨水和饮料等实际样品溶液的pH的测定.     

Injectable Hydrogel for Sustained Protein Release by Salt‐Induced Association of Hyaluronic Acid Nanogel

A hyaluronic acid‐based anionic nanogel formed by self‐assembly of cholesteryl‐group‐bearing HA is designed for protein delivery. The HA nanogel spontaneously binds various types of proteins without denaturation, such as recombinant human growth hormone, erythropoietin, exendin‐4, and lysozyme. The HA nanogel shows unique colloidal properties, in particular that an injectable hydrogel is formed by salt‐induced association of the HA nanogel. A pharmacokinetic study in rats shows that an in situ gel formulation, prepared by simply mixing rhGH and HA nanogel in phosphate buffer, maintains plasma rhGH levels within a narrow range over one week. Therefore, HA nanogels offer a simple method for easy formulation of therapeutic proteins and are effective for sustained protein release systems.

     

Synthesis of Imatinib‐loaded chitosan‐modified magnetic nanoparticles as an anti‐cancer agent for pH responsive targeted drug delivery

Targeted drug delivery is a promising approach to overcome the limitations of classical chemotherapy. In this respect, Imatinib‐loaded chitosan‐modified magnetic nanoparticles were prepared as a pH sensitive system for targeted delivery of drug to tumor sites by applying a magnetic field. The proposed magnetic nanoparticles were prepared through modification of magnetic Fe₃O₄ nanoparticles with chitosan and Imatinib. The structural, morphological and physicochemical properties of the synthesized nanoparticles were determined by different analytical techniques including energy‐dispersive X‐ray spectroscopy (EDS), field emission scanning electron microscopy (FESEM), Fourier‐transform infrared (FTIR) spectroscopy, high resolution transmission electron microscopy (HR‐TEM), vibrating sample magnetometry (VSM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). UV/visible spectrophotometry was used to measure the Imatinib contents. Thermal stability of the prepared particles was investigated and their efficiency of drug loading and release profile were evaluated. The results demonstrated that Fe₃O₄@CS acts as a pH responsive nanocarrier in releasing the loaded Imatinib molecules. Furthermore, the Fe₃O₄@CS/Imatinib nanoparticles displayed cytotoxic effect against MCF‐7 breast cancer cells. Results of this study can provide new insights in the development of pH responsive targeted drug delivery systems to overcome the side effects of conventional chemotherapy.     

pH‐responsive near‐infrared emitting conjugated polymer nanoparticles for cellular imaging and controlled‐drug delivery

In this article, pH‐responsive near‐infrared emitting conjugated polymer nanoparticles (CPNs) are prepared, characterized, and their stabilities are investigated under various conditions. These nanoparticles have capacity to be loaded with water insoluble, anticancer drug, camptothecin (CPT), with around 10% drug loading efficiency. The in vitro release studies demonstrate that the release of CPTs from CPNs is pH‐dependent such that significantly faster drug release at mildly acidic pH of 5.0 compared with physiological pH 7.4 is observed. Time and dose‐dependent in vitro cytotoxicity tests of blank and CPT‐loaded nanoparticles are performed by real‐time cell electronic sensing (RT‐CES) assay with hepatocellular carcinoma cells (Huh7). The results indicate that CPNs can be effectively utilized as vehicles for pH‐triggered release of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 114–122     

pH and ionic sensitive chitosan/carboxymethyl chitosan IPN complex films for the controlled release of coenzyme A

pH and ionic sensitive interpenetrating polymer network (IPN) complex films based on chitosan (CS) and carboxymethyl chitosan (CM-CS) were prepared by using glutaraldehyde as crosslinking agent. Its structure was characterized by FT-IR, which indicated that the IPN was formed. The films were studied by swelling, weight loss with time, and release of coenzyme A (CoA). It was found that the IPN films were sensitive to pH and ionic strength of the medium. The cumulative release rate of CoA decreased with CoA loading content, ionic strength or crosslinking agent increasing. The composition of the IPN films and pH of release medium also had significant effect on the release of CoA. The differences in the rates and amounts of released CoA may be attributed to the swelling behavior, the degradation of films, and interaction between drug molecule and polymer matrix. These results suggested CS/CM-CS IPN films could be used as drug delivery carrier.     

A pH‐sensitive water‐soluble N‐carboxyethyl chitosan/poly(hydroxyethyl methacrylate) hydrogel as a potential drug sustained release matrix prepared by photopolymerization technique

Biocompatible pH‐sensitive semi‐interpenetration polymeric network hydrogels (semi‐IPN) based on water‐soluble N‐carboxyethyl chitosan (CECS) and 2‐hydroxyethyl methacrylate (HEMA) were synthesized by the photopolymerization technique. pH‐sensitivity, cytotoxicity, morphology, mechanical property, and water state of hydrogel were investigated by a swelling test, methylthiazolydiphenyl‐tetrazolium bromide (MTT) assay, scanning electron microscopy (SEM), universal testing machine, and differential scanning calorimetry (DSC), respectively. The drug release studies were carried out using 5‐Flurouracil as the model drug. The results indicated that the hydrogels were sensitive to pH of the medium and its wet state had good mechanical properties. The results of cytotoxicity and prolonged drug release characteristics revealed the suitability of the hydrogels as drug delivery matrices. The release kinetics was evaluated by fitting the experimental data to standard release equations, and the best fit was obtained with the Higuchi model of the hydrogel. Copyright © 2008 John Wiley & Sons, Ltd.     

Immune stimulating activity of an atrophic rhinitis vaccine associated to pegylated chitosan microspheres in vitro

It has previously been found that chitosan microspheres are easily aggregated due to their physical and storage instabilities. In this study, to overcome their instability, chitosan was covalently conjugated with poly(ethylene glycol). Pegylated chitosan microspheres were prepared through the ionic gelation process of pegylated chitosan with tripolyphosphate. Bordetella bronchiseptica dermonecrotoxin, major virulence factor of atrophic rhinitis causative agent, was loaded onto pegylated chitosan microspheres for nasal vaccination. Average particle sizes of Bordetella bronchiseptica dermonecrotoxin-loaded pegylated chitosan microspheres were 5.47 µm. Microspheres obtained from pegylated chitosan microspheres were physically more stable than those from chitosan microspheres, and Bordetella bronchiseptica dermonecrotoxin-loaded pegylated chitosan microspheres released more Bordetella bronchiseptica dermonecrotoxin than Bordetella bronchiseptica dermonecrotoxin-loaded chitosan microspheres in vitro. Macrophage RAW264.7 cells stimulated with Bordetella bronchiseptica dermonecrotoxin-loaded pegylated chitosan microspheres gradually secreted tumor necrosis factor α and nitric oxide, suggesting that pegylated chitosan microspheres are very promising vaccine delivery systems. Copyright © 2007 John Wiley & Sons, Ltd.